(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Square HSS End Mills（Machining Application：Inclined Cuts）
[Misumi's High Speed Steel End Mill]
In addition to the difference in blade length from short size to long size, non-coated items from minimum φ1 to maximum φ50 are available in extensive sizes.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
168 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
G 2-Flute End Mill for Key Groove GHKEY
NACHI(FUJIKOSHI)
End mill for key groove machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 6 ～ 20 6 ～ 20 2 50 ～ 85 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts TiN Square Weak torsion (15 to 25˚) - Cobalt HSS - - From: 648,073 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more 
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flutes end mill for finishing.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Helix angle: 30°Blade Tip Shape: Sharp Corner
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 60 2 ～ 85 6 ～ 42 2 50 ～ 185 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 376,717 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G 2-Flute End Mill for Key Groove GLKEY
NACHI(FUJIKOSHI)
End mill for key groove machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 6 ～ 20 6 ～ 20 2 50 ～ 85 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts TiN Square Weak torsion (15 to 25˚) - Cobalt HSS - - From: 599,994 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 4 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 216,421 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts AG Square Standard torsion (30-40°) - Cobalt HSS - - From: 576,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 2 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Inclined Cuts TiAlN Square Standard torsion (30-40°) - Cobalt HSS - - From: 163,955 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
AG Mill, 2-Flute Mill, Medium 2AGEM
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 20 3 ～ 45 6 ～ 20 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts TiAlN Square Standard torsion (30-40°) - Cobalt HSS - - From: 576,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 32 13 ～ 53 6 ～ 32 3 ～ 6 57 ～ 133 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 718,360 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 258,103 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts AG Square Standard torsion (30-40°) - Cobalt HSS - - From: 641,699 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-flute, General-purpose, Short Type EDS
OSG
High-speed steel square series.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.45 ～ 60 1.1 ～ 80 6 ～ 42 2 45 ～ 170 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 543,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
End Mill (3-Flute General Purpose Short Type) ETS
OSG
General-purpose 3-flute end mill short type using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 30 2.5 ～ 55 6 ～ 25 3 45 ～ 125 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 675,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
G Standard End Mill, 2-Flute 2GE
NACHI(FUJIKOSHI)
[Features]· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.· It is suitable for side processing
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 585,240 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS
OSG
V coating applied 2-flute short type end mill for counterbore milling using powder metal high-speed steel CPM as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 8 ～ 38 6 ～ 20 2 50 ～ 125 general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] Inclined Cuts - Square Weak torsion (15 to 25˚) - Powder high-speed steel - Straight From: 1,441,667 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG
TiN coated general-purpose 2-flute end mill long type. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 6 ～ 110 6 ～ 32 2 50 ～ 195 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,043,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
CPM End Mill (2-flute straight blade for forming work, medium type) CPM-STDN
OSG
2-flute straight flute end mill medium type for molding using powder metal high-speed steel CPM as the base material. It can be molded into the required shape for use.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 20 5 ～ 45 6 ～ 20 2 45 ～ 110 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square No torsion - Powder high-speed steel - Straight From: 925,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
End Mill (2-Flute Short Type for Aluminum) AL-EDS
OSG
2-flute end mill short type for aluminum alloys using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 30 4 ～ 55 6 ～ 25 2 45 ～ 125 Aluminum[◎] / Copper[○] / Resin[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 603,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS
OSG
[Features]· Adopts TiN coating with excellent weld resistance and abrasion resistance.· Those with outer diameter of 41 mm or more have center holes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 40 7 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 865,000 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 3/16 - - 2 - general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 670,366 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG
TIN coating, 30° helix angle, cobalt high-speed steel square end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 4 60 ～ 195 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,140,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-αM S-Coated Alpha Nick Regular Blade
SANKO MFG
Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 35 ～ 120 10 ～ 42 4 ～ 6 100 ～ 240 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,826,147 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1/2 1-1/4 1/2 4 3-1/4 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Inclined Cuts - Square Standard torsion (30-40°) - Cobalt HSS - - From: 743,452 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-Flute Long End Mill (M42 HSS)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 50 10 ～ 125 6 ～ 42 2 60 ～ 215 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 324,171 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Flute Long End Mill (M42 HSS)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 50 10 ～ 125 6 ～ 42 4 60 ～ 215 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 344,432 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]·High-speed steel roughing short flute length type with standard TiAlN coating·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 30 13 ～ 45 6 ～ 25 3 ～ 6 57 ～ 121 general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts TiAlN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 649,146 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 344,833 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
OSG
General-purpose 2-flute end mill super long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 30 ～ 150 6 ～ 32 2 70 ～ 235 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 986,667 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
TiN coated general-purpose 2-flute short type end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 50 1.6 ～ 75 6 ～ 42 2 45 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 776,667 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-flute, General-purpose, Long Type EDL
OSG
General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 40 6 ～ 110 6 ～ 32 2 50 ～ 195 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 653,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)
OSG
V coated powder metal high-speed steel XPM keyway end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 12 5 ～ 15 6 ～ 12 2 50 ～ 70 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] Inclined Cuts - Square Weak torsion (15 to 25˚) - Powder high-speed steel - Straight From: 1,456,667 VND Days to Ship: Số ngày giao hàng: 15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
XPM End Mill (2-Flute Long Type) XPM-EDL
OSG
2-flute end mill long type using powder metal high-speed steel XPM as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 2 65 ～ 210 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Powder high-speed steel - Straight From: 1,053,333 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
XPM Long Shank, Short, Fine Pitch Type VLS-XPM-RESF
OSG
[Features]· Powdered V coating high-speed steel XPM roughing.· Blade shaped to emphasize chip discharge performance.· Those with outer diameter of 32 mm or more have center holes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 22 11 ～ 38 6 ～ 20 3 80 ～ 140 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] Inclined Cuts - Roughing Weak torsion (15 to 25˚) - Powder high-speed steel - Straight From: 2,378,333 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· The outer diameter tolerance is negative (φ2-50).
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 60 10 ～ 85 6 ～ 42 4 50 ～ 185 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 412,127 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSM S Coated Estech Muscle 3-Flute Regular
SANKO MFG
[Features]· A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.· With a unique roughing blade shape, a wide range of machining from heavy duty cutting to finishing machining is possible
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 30 15 ～ 55 8 ～ 32 3 65 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Inclined Cuts TiCN Square Powerful Torsion (45°-60°) Available Powder high-speed steel 17 ～ 65 - From: 1,013,800 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 40 10 ～ 65 6 ～ 32 4 ～ 6 70 ～ 185 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 1,203,727 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 8 ～ 75 6 ～ 42 4 ～ 6 55 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] Inclined Cuts Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 760,406 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 30 13 ～ 45 6 ～ 25 3 ～ 5 57 ～ 121 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts For High Hardness (Silicon Group) Roughing Powerful Torsion (45°-60°) Available Powder high-speed steel - - From: 1,102,251 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]·Demonstrates outstanding durability even during high-speed machining where load on tool is large·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 32 13 ～ 53 6 ～ 32 3 ～ 6 57 ～ 133 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts For High Hardness (Silicon Group) Roughing Standard torsion (30-40°) Available Powder high-speed steel - - From: 1,028,851 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
MISUMI
[Features]·High-speed steel roughing uncoated regular flute length type with optimum pitch width for coarse finishing·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 19 ～ 112 6 ～ 42 3 ～ 6 63 ～ 214 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 714,399 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short
MISUMI
[Features]·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 25 15 ～ 50 8 ～ 25 3 65 ～ 140 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts For High Hardness (Silicon Group) Square Powerful Torsion (45°-60°) Available Powder high-speed steel - - From: 814,907 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G Standard End Mill, 4-Flute 4GE
NACHI(FUJIKOSHI)
It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 659,797 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
G Medium End Mill, 2-Flute 2MGE
NACHI(FUJIKOSHI)
General purpose coated end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 8 15 ～ 20 8 ～ 10 2 60 ～ 65 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 454,500 VND Days to Ship: Số ngày giao hàng: 10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 20 2 ～ 40 6 ～ 20 2 50 ～ 110 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 463,471 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G Long End Mill, 4-Flute SL4GE
NACHI(FUJIKOSHI)
General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 125 6 ～ 32 4 60 ～ 210 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 744,190 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Short Type, 4-Flute Multi-Flute Center Cut CC-EMS
OSG
Cobalt high-speed steel center cut.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.): 4Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 603,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NACHI(FUJIKOSHI) | SANKO MFG | NACHI(FUJIKOSHI) | YG 1 | NACHI(FUJIKOSHI) | YG 1 | NACHI(FUJIKOSHI) | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | YG 1 | OSG | SANKO MFG | YG 1 | YG 1 | YG 1 | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG |
| Product SeriesDòng sản phẩm | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | CPM End Mill (2-flute straight blade for forming work, medium type) CPM-STDN | TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut | V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1) | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model | AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short | |||||||||||||||||||||||||||||||||||||
| From | 648,073 VND | 376,717 VND | 599,994 VND | 216,421 VND | 576,388 VND | 163,955 VND | 576,388 VND | 718,360 VND Special Price On Sale Till 31/03/2025 | 258,103 VND | 641,699 VND | 543,333 VND Special Price On Sale Till 31/03/2025 | 675,000 VND | 585,240 VND | 1,441,667 VND | 1,043,333 VND | 925,000 VND | 603,333 VND | 865,000 VND | 670,366 VND | 1,140,000 VND | 1,826,147 VND | 743,452 VND | 324,171 VND | 344,432 VND | 649,146 VND | 344,833 VND | 986,667 VND | 776,667 VND | 653,333 VND | 1,456,667 VND | 1,053,333 VND | 2,378,333 VND | 412,127 VND | 1,013,800 VND | 1,203,727 VND | 760,406 VND | 1,102,251 VND | 1,028,851 VND | 714,399 VND | 814,907 VND | 659,797 VND | 454,500 VND | 463,471 VND | 744,190 VND | 603,333 VND |
| Days to ShipSố ngày giao hàng | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | Same day or more | 17 Day(s) | 4 Day(s) or more | 17 Day(s) | Same day or more | 17 Day(s) | Same day or more | 8 Day(s) or more | 7 Day(s) | 17 Day(s) | 8 Day(s) or more | 7 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 8 Day(s) or more | 7 Day(s) or more | Same day or more | 15 Day(s) | 17 Day(s) | 17 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | Same day or more |
| SpecificationsĐặc điểm kĩ thuật | |||||||||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 3 ～ 20 | 1 ～ 60 | 3 ～ 20 | 1 ～ 50 | 1 ～ 50 | 1 ～ 50 | 1.5 ～ 20 | 6 ～ 32 | 2.5 ～ 50 | 2.5 ～ 50 | 0.45 ～ 60 | 1 ～ 30 | 1 ～ 50 | 3 ～ 20 | 1 ～ 40 | 1.5 ～ 20 | 1.5 ～ 30 | 2.5 ～ 40 | 1 ～ 3/16 | 3 ～ 40 | 10 ～ 50 | 1/2 | 2 ～ 50 | 2 ～ 50 | 5 ～ 30 | 1 ～ 50 | 3 ～ 40 | 0.8 ～ 50 | 0.8 ～ 40 | 3 ～ 12 | 3 ～ 40 | 6 ～ 22 | 3 ～ 60 | 6 ～ 30 | 5 ～ 40 | 5 ～ 50 | 6 ～ 30 | 5 ～ 32 | 6 ～ 50 | 6 ～ 25 | 2.5 ～ 50 | 6 ～ 8 | 1 ～ 20 | 3 ～ 40 | 2.5 ～ 40 |
| Blade length (ℓ)(mm) | 6 ～ 20 | 2 ～ 85 | 6 ～ 20 | 2.5 ～ 75 | 2 ～ 70 | 2.5 ～ 75 | 3 ～ 45 | 13 ～ 53 | 7 ～ 70 | 7 ～ 70 | 1.1 ～ 80 | 2.5 ～ 55 | 2 ～ 70 | 8 ～ 38 | 6 ～ 110 | 5 ～ 45 | 4 ～ 55 | 7 ～ 65 | - | 15 ～ 110 | 35 ～ 120 | 1-1/4 | 10 ～ 125 | 10 ～ 125 | 13 ～ 45 | 2 ～ 70 | 30 ～ 150 | 1.6 ～ 75 | 6 ～ 110 | 5 ～ 15 | 15 ～ 110 | 11 ～ 38 | 10 ～ 85 | 15 ～ 55 | 10 ～ 65 | 8 ～ 75 | 13 ～ 45 | 13 ～ 53 | 19 ～ 112 | 15 ～ 50 | 7 ～ 70 | 15 ～ 20 | 2 ～ 40 | 15 ～ 125 | 10 ～ 65 |
| Shank diameter (d)(mm) | 6 ～ 20 | 6 ～ 42 | 6 ～ 20 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 20 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 20 | 6 ～ 32 | 6 ～ 20 | 6 ～ 25 | 6 ～ 32 | - | 6 ～ 32 | 10 ～ 42 | 1/2 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 12 | 6 ～ 32 | 6 ～ 20 | 6 ～ 42 | 8 ～ 32 | 6 ～ 32 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 42 | 8 ～ 25 | 6 ～ 42 | 8 ～ 10 | 6 ～ 20 | 6 ～ 32 | 6 ～ 32 |
| Number of flutes(sheet) | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 3 ～ 6 | 4 | 4 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 4 | 4 ～ 6 | 4 | 2 | 4 | 3 ～ 6 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 3 | 4 ～ 6 | 4 ～ 6 | 3 ～ 5 | 3 ～ 6 | 3 ～ 6 | 3 | 4 | 2 | 2 | 4 | 4 |
| Overall Length (L)(mm) | 50 ～ 85 | 50 ～ 185 | 50 ～ 85 | 55 ～ 165 | 50 ～ 160 | 55 ～ 165 | 50 ～ 110 | 57 ～ 133 | 50 ～ 160 | 50 ～ 160 | 45 ～ 170 | 45 ～ 125 | 50 ～ 160 | 50 ～ 125 | 50 ～ 195 | 45 ～ 110 | 45 ～ 125 | 50 ～ 150 | - | 60 ～ 195 | 100 ～ 240 | 3-1/4 | 60 ～ 215 | 60 ～ 215 | 57 ～ 121 | 50 ～ 160 | 70 ～ 235 | 45 ～ 165 | 50 ～ 195 | 50 ～ 70 | 65 ～ 210 | 80 ～ 140 | 50 ～ 185 | 65 ～ 150 | 70 ～ 185 | 55 ～ 165 | 57 ～ 121 | 57 ～ 133 | 63 ～ 214 | 65 ～ 140 | 50 ～ 160 | 60 ～ 65 | 50 ～ 110 | 60 ～ 210 | 50 ～ 150 |
| work material | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Machining Application | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts |
| Coating | TiN | Non-Coated | TiN | TiAlN / Non-Coated | AG | TiAlN | TiAlN | TiCN | Non-Coated | AG | Non-Coated | Non-Coated | TiN | - | TiN | Non-Coated | Non-Coated | TiN | Non-Coated | TiN | TiCN | - | TiAlN / Non-Coated | TiAlN / Non-Coated | TiAlN | Non-Coated | Non-Coated | TiN | Non-Coated | - | Non-Coated | - | Non-Coated | TiCN | TiCN | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | TiN | TiN | Non-Coated | TiN | Non-Coated |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square |
| Torsion Angle (θ) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | No torsion | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | - | Available | - | - | - | - | - | Available | - | - | - | - | - | - | - | - | - | - | - | - | Available | - | - | - | Available | - | - | - | - | - | - | - | Available | Available | Available | Available | Available | Available | Available | Available | - | - | - | - | - |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 17 ～ 65 | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | Straight | Straight | - | Straight | Straight | Straight | Straight | Straight | - | Straight | - | - | - | - | - | - | Straight | Straight | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | Straight |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1/4
- 1/8
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3/16
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
-
Underneck length (ℓ1)(mm)
-
shank
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy