(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Square HSS End Mills（Tool Material Type：Cobalt HSS）
[Misumi's High Speed Steel End Mill]
In addition to the difference in blade length from short size to long size, non-coated items from minimum φ1 to maximum φ50 are available in extensive sizes.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
186 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
G 2-Flute End Mill for Key Groove GHKEY
NACHI(FUJIKOSHI)
End mill for key groove machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 6 ～ 20 6 ～ 20 2 50 ～ 85 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Weak torsion (15 to 25˚) - Cobalt HSS - - From: 648,073 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more 
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flutes end mill for finishing.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Helix angle: 30°Blade Tip Shape: Sharp Corner
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 60 2 ～ 85 6 ～ 42 2 50 ～ 185 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 376,717 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G 2-Flute End Mill for Key Groove GLKEY
NACHI(FUJIKOSHI)
End mill for key groove machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 6 ～ 20 6 ～ 20 2 50 ～ 85 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Weak torsion (15 to 25˚) - Cobalt HSS - - From: 599,994 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 4 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 216,421 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts AG Square Standard torsion (30-40°) - Cobalt HSS - - From: 576,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 344,833 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 2 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN Square Standard torsion (30-40°) - Cobalt HSS - - From: 163,955 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 258,103 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts AG Square Standard torsion (30-40°) - Cobalt HSS - - From: 641,699 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill (3-Flute General Purpose Short Type) ETS
OSG
General-purpose 3-flute end mill short type using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 30 2.5 ～ 55 6 ～ 25 3 45 ～ 125 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 675,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-flute, General-purpose, Short Type EDS
OSG
High-speed steel square series.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.45 ～ 60 1.1 ～ 80 6 ～ 42 2 45 ～ 170 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 543,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
AG Mill, 2-Flute Mill, Medium 2AGEM
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 20 3 ～ 45 6 ～ 20 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiAlN Square Standard torsion (30-40°) - Cobalt HSS - - From: 576,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill (2-Flute Short Type for Aluminum) AL-EDS
OSG
2-flute end mill short type for aluminum alloys using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 30 4 ～ 55 6 ～ 25 2 45 ～ 125 Aluminum[◎] / Copper[○] / Resin[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 603,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
G Standard End Mill, 2-Flute 2GE
NACHI(FUJIKOSHI)
[Features]· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.· It is suitable for side processing
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 585,240 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS
OSG
[Features]· Adopts TiN coating with excellent weld resistance and abrasion resistance.· Those with outer diameter of 41 mm or more have center holes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 75 6 ～ 42 4 ～ 6 50 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 865,000 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Roughing End Mill (M42 HSS)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 24 ～ 150 6 ～ 42 3 ～ 6 68 ～ 252 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove TiAlN / Non-Coated Roughing Standard torsion (30-40°) - Cobalt HSS - - From: 946,992 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square long flute length 2-flute type with up to ø50·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 2 60 ～ 195 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 350,110 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 12 ～ 50 55 ～ 140 12 ～ 42 4 ～ 6 105 ～ 250 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Side / Groove Non-Coated Roughing Standard torsion (30-40°) - Cobalt HSS - - From: 2,095,091 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
TiN coated general-purpose 2-flute end mill long type. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 40 6 ～ 110 6 ～ 32 2 50 ～ 195 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,043,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
OSG
TIN coating, 30° helix angle, cobalt high-speed steel square end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 4 60 ～ 195 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,140,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
AG Mill, Roughing, Long Shank, SX/SLX Type AGREX/AGREU
NACHI(FUJIKOSHI)
Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 20 ～ 75 10 ～ 42 4 ～ 6 130 ～ 350 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Side - Square Standard torsion (30-40°) Available / None Cobalt HSS 64 ～ 144 - From: 2,713,228 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 3/16 - - 2 - general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 670,366 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square regular blade length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 25 3.5 ～ 60 6 ～ 25 2 45 ～ 130 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 307,571 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
AG Mill, Roughing, Short AGRES
NACHI(FUJIKOSHI)
Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 11 ～ 75 6 ～ 42 4 ～ 6 80 ～ 220 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Side / Groove AG Roughing Standard torsion (30-40°) - Cobalt HSS 45 ～ 95 - From: 1,346,830 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WXL Coating End Mill (Roughing Short Fine Pitch Type) WH-RESF
OSG
Next-generation HSS roughing end mill that can cut in a wide range - dry and wet.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 40 13 ～ 63 6 ～ 32 4 ～ 6 80 ～ 185 general steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○] Plane / Side / Groove - Roughing Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,760,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-αM S-Coated Alpha Nick Regular Blade
SANKO MFG
Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 35 ～ 120 10 ～ 42 4 ～ 6 100 ～ 240 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,826,147 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1/2 1-1/4 1/2 4 3-1/4 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts - Square Standard torsion (30-40°) - Cobalt HSS - - From: 743,452 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-Flute Long End Mill (M42 HSS)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 50 10 ～ 125 6 ～ 42 2 60 ～ 215 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 324,171 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
General-purpose 2-flute end mill super long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 30 ～ 150 6 ～ 32 2 70 ～ 235 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 986,667 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
TiN coated general-purpose 2-flute short type end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 50 1.6 ～ 75 6 ～ 42 2 45 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 776,667 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-flute, General-purpose, Long Type EDL
OSG
General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 40 6 ～ 110 6 ～ 32 2 50 ～ 195 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 653,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 20 ～ 250 6 ～ 42 2 60 ～ 345 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 493,471 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
[Features]· A 4-flute end mill for finish machining.· The outer diameter tolerance is negative (φ2-50).
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 60 10 ～ 85 6 ～ 42 4 50 ～ 185 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 412,127 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
P-XαM P Coating Xα Nick Regular Flute
SANKO MFG
[Features]· A semi-fine pitch type P-XαS roughing end mill.· Excellent chip discharge.· Enables a wide range of machining applications, due to the regular flute.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 40 15 ～ 100 6 ～ 32 4 ～ 6 80 ～ 220 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,336,512 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 8 ～ 75 6 ～ 42 4 ～ 6 55 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 760,406 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ultra Long End Mill with 4 Flutes EXLE4
EIKOSHA
[Features]· It is a ultra-long 4-flute type with 45° high torsion angle.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 20 ～ 50 100 ～ 250 20 ～ 42 4 180 ～ 350 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Powerful Torsion (45°-60°) Available Cobalt HSS - - From: 5,747,752 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Flute H.S.S End Mill (Uncoated/TIN/TICN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 40 8 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 220,258 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]·High-speed steel roughing short flute length type with standard TiAlN coating·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TiAlN
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 30 13 ～ 45 6 ～ 25 3 ～ 6 57 ～ 121 general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiAlN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 649,146 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square short flute length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 2 45 ～ 165 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 290,681 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model
MISUMI
[Features]·Uncoated 4-flute long flute length type·Effective for side milling with 40° helix angle, which is stronger than standard helix angle·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 4 60 ～ 195 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 424,343 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G Standard End Mill, 4-Flute 4GE
NACHI(FUJIKOSHI)
It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 659,797 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
AG Mill, Roughing, Regular Length Short AGRERS
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 7 ～ 50 20 ～ 70 10 ～ 42 4 ～ 6 65 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Side / Groove TiAlN Roughing Standard torsion (30-40°) - Cobalt HSS - - From: 1,460,885 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G Medium End Mill, 2-Flute 2MGE
NACHI(FUJIKOSHI)
General purpose coated end mill.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 8 15 ～ 20 8 ～ 10 2 60 ～ 65 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 454,500 VND Days to Ship: Số ngày giao hàng: 10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 20 2 ～ 40 6 ～ 20 2 50 ～ 110 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 463,471 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 50 9 ～ 70 6 ～ 42 4 ～ 6 50 ～ 160 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Side / Groove Non-Coated Roughing Standard torsion (30-40°) - Cobalt HSS - - From: 776,873 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NACHI(FUJIKOSHI) | SANKO MFG | NACHI(FUJIKOSHI) | YG 1 | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | YG 1 | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | OSG | YG 1 | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | NACHI(FUJIKOSHI) | YG 1 | MISUMI | NACHI(FUJIKOSHI) | OSG | SANKO MFG | YG 1 | YG 1 | OSG | OSG | OSG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | EIKOSHA | OSG KOREA CORP | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product SeriesDòng sản phẩm | High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model | WXL Coating End Mill (Roughing Short Fine Pitch Type) WH-RESF | TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut | High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model | |||||||||||||||||||||||||||||||||||||||
| From | 648,073 VND | 376,717 VND | 599,994 VND | 216,421 VND | 576,388 VND | 344,833 VND | 163,955 VND | 258,103 VND | 641,699 VND | 675,000 VND | 543,333 VND Special Price On Sale Till 31/03/2025 | 576,388 VND | 603,333 VND | 585,240 VND | 865,000 VND | 946,992 VND | 350,110 VND | 2,095,091 VND | 1,043,333 VND | 1,140,000 VND | 2,713,228 VND | 670,366 VND | 307,571 VND | 1,346,830 VND | 1,760,000 VND | 1,826,147 VND | 743,452 VND | 324,171 VND | 986,667 VND | 776,667 VND | 653,333 VND | 493,471 VND | 412,127 VND | 1,336,512 VND | 760,406 VND | 5,747,752 VND | 220,258 VND | 649,146 VND | 290,681 VND | 424,343 VND | 659,797 VND | 1,460,885 VND | 454,500 VND | 463,471 VND | 776,873 VND |
| Days to ShipSố ngày giao hàng | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 17 Day(s) | Same day or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 17 Day(s) | 6 Day(s) or more | 7 Day(s) | Same day or more | 6 Day(s) or more | 17 Day(s) | 8 Day(s) or more | 7 Day(s) | 4 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 3 ～ 20 | 1 ～ 60 | 3 ～ 20 | 1 ～ 50 | 1 ～ 50 | 1 ～ 50 | 1 ～ 50 | 2.5 ～ 50 | 2.5 ～ 50 | 1 ～ 30 | 0.45 ～ 60 | 1.5 ～ 20 | 1.5 ～ 30 | 1 ～ 50 | 2.5 ～ 50 | 6 ～ 50 | 3 ～ 40 | 12 ～ 50 | 1 ～ 40 | 3 ～ 40 | 10 ～ 50 | 1 ～ 3/16 | 1 ～ 25 | 6 ～ 50 | 6 ～ 40 | 10 ～ 50 | 1/2 | 2 ～ 50 | 3 ～ 40 | 0.8 ～ 50 | 0.8 ～ 40 | 3 ～ 50 | 3 ～ 60 | 5 ～ 40 | 5 ～ 50 | 20 ～ 50 | 2 ～ 40 | 5 ～ 30 | 1 ～ 50 | 3 ～ 40 | 2.5 ～ 50 | 7 ～ 50 | 6 ～ 8 | 1 ～ 20 | 3 ～ 50 |
| Blade length (ℓ)(mm) | 6 ～ 20 | 2 ～ 85 | 6 ～ 20 | 2.5 ～ 75 | 2 ～ 70 | 2 ～ 70 | 2.5 ～ 75 | 7 ～ 70 | 7 ～ 70 | 2.5 ～ 55 | 1.1 ～ 80 | 3 ～ 45 | 4 ～ 55 | 2 ～ 70 | 7 ～ 75 | 24 ～ 150 | 15 ～ 110 | 55 ～ 140 | 6 ～ 110 | 15 ～ 110 | 20 ～ 75 | - | 3.5 ～ 60 | 11 ～ 75 | 13 ～ 63 | 35 ～ 120 | 1-1/4 | 10 ～ 125 | 30 ～ 150 | 1.6 ～ 75 | 6 ～ 110 | 20 ～ 250 | 10 ～ 85 | 15 ～ 100 | 8 ～ 75 | 100 ～ 250 | 8 ～ 65 | 13 ～ 45 | 2.5 ～ 75 | 15 ～ 110 | 7 ～ 70 | 20 ～ 70 | 15 ～ 20 | 2 ～ 40 | 9 ～ 70 |
| Shank diameter (d)(mm) | 6 ～ 20 | 6 ～ 42 | 6 ～ 20 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 20 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 12 ～ 42 | 6 ～ 32 | 6 ～ 32 | 10 ～ 42 | - | 6 ～ 25 | 6 ～ 42 | 6 ～ 32 | 10 ～ 42 | 1/2 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 20 ～ 42 | 6 ～ 32 | 6 ～ 25 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 10 ～ 42 | 8 ～ 10 | 6 ～ 20 | 6 ～ 42 |
| Number of flutes(sheet) | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 4 | 4 | 3 | 2 | 2 | 2 | 2 | 4 ～ 6 | 3 ～ 6 | 2 | 4 ～ 6 | 2 | 4 | 4 ～ 6 | 2 | 2 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 | 2 | 2 | 2 | 2 | 2 | 4 | 4 ～ 6 | 4 ～ 6 | 4 | 4 | 3 ～ 6 | 2 | 4 | 4 | 4 ～ 6 | 2 | 2 | 4 ～ 6 |
| Overall Length (L)(mm) | 50 ～ 85 | 50 ～ 185 | 50 ～ 85 | 55 ～ 165 | 50 ～ 160 | 50 ～ 160 | 55 ～ 165 | 50 ～ 160 | 50 ～ 160 | 45 ～ 125 | 45 ～ 170 | 50 ～ 110 | 45 ～ 125 | 50 ～ 160 | 50 ～ 165 | 68 ～ 252 | 60 ～ 195 | 105 ～ 250 | 50 ～ 195 | 60 ～ 195 | 130 ～ 350 | - | 45 ～ 130 | 80 ～ 220 | 80 ～ 185 | 100 ～ 240 | 3-1/4 | 60 ～ 215 | 70 ～ 235 | 45 ～ 165 | 50 ～ 195 | 60 ～ 345 | 50 ～ 185 | 80 ～ 220 | 55 ～ 165 | 180 ～ 350 | 50 ～ 150 | 57 ～ 121 | 45 ～ 165 | 60 ～ 195 | 50 ～ 160 | 65 ～ 160 | 60 ～ 65 | 50 ～ 110 | 50 ～ 160 |
| work material | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Countersinking | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Countersinking | Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove |
| Coating | TiN | Non-Coated | TiN | TiAlN / Non-Coated | AG | Non-Coated | TiAlN | Non-Coated | AG | Non-Coated | Non-Coated | TiAlN | Non-Coated | TiN | TiN | TiAlN / Non-Coated | Non-Coated | Non-Coated | TiN | TiN | - | Non-Coated | Non-Coated | AG | - | TiCN | - | TiAlN / Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | TiCN / Non-Coated | TiAlN | Non-Coated | Non-Coated | TiN | TiAlN | TiN | Non-Coated | Non-Coated |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Roughing | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Square | Square | Roughing | Square | Square | Square | Roughing | Square | Square | Roughing |
| Torsion Angle (θ) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | - | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | - | - | - | Available / None | - | Available | - | - | Available | - | - | - | - | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | - | - | - | - | - |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 64 ～ 144 | - | - | 45 ～ 95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | Straight | Straight | - | Straight | - | Straight | - | - | - | Straight | Straight | - | - | - | - | Straight | - | - | - | Straight | Straight | Straight | - | - | - | - | - | Straight | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1/4
- 1/8
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3/16
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
-
Underneck length (ℓ1)(mm)
-
shank
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy