Carbide Radius End Mills（Coating：Non-Coated）

• You can add up to 6 items per a category to the compare list. Compare

  

  3 Flutes Short for Copper & Aluminum Alloys

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Even when machining aluminum parts that require a large amount of cutting, the excellent cutting chip discharge created by the unique groove foam realizes large depth of cut and high feed at the same time.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	3	50 ～ 105	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,587,723 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

  MISUMI

  [Features]·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • General Steel

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.1 ～ 3	4 ～ 60	2 ～ 4	40 ～ 125	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	±0.02

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSR200 CBN Super Speed Radius End Mill

  NS TOOL

  [Features]・ Achieves high efficiency machining of corner R with outstanding durability of CBN.・ With a smooth continuous blade over the entire cutting edge. Excellent surface precision can be achieved.・ Available with tempered (pre-hardened) steel to high hardness materials of 68 HRC.・ Standard expansion from ø0.1.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 2	0.02 ～ 0.5	0.08 ～ 1.2	2	48 ～ 53	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	0.5 ～ 10	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	No torsion	0.005～-0.005

  From: 3,612,558 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

  MISUMI

  Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 22	0.5 ～ 2	9 ～ 33	3	80 ～ 200	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.02

  From: 1,801,712 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSR-2 radius end mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Straight and corner radius machining can be performed at the same time. Excellent corner radius accuracy.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	0.2 ～ 2	3 ～ 18	2	45 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	0.02～-0.02

  From: 1,763,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Radius End Mill 2-Flute

  ATOM

  Simultaneously machines rounded corners and straight base surfaces. High precision radius shape smoothly connects the straight part with the rounded part.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	0.1 ～ 2	3 ～ 15	2	45 ～ 60	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	4 ～ 6	-	Plane / Side / Curved surface	Non-Coated	radius	Standard torsion (30-40°)	±0.02 ～ ±0.05

  From: 1,439,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN-LRF High Grade 2-Flute Long Neck Radius

  UNION TOOL

  【特長】・高硬度材加工に最適なCBN素材の採用と刃形状の改良により、高精度で長寿命です。・優れた耐摩耗性と耐欠損性により、長時間加工でも良好な加工面粗さと精度を実現しました。・高精度のコーナRです。・シャンク径公差：0/-0.004mm・外径公差：0/-0.008mm

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	-	0.08 ～ 1.2	2	50	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	-	Non-Coated	Long-Neck Radius	No torsion	±2 ～ ±3

  From: 3,096,583 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

  MISUMI

  Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	2	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 12	23 ～ 50	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

  MISUMI

  Radius type that's also effective in preventing cutter marks

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	3	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 12	23 ～ 50	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

  MISUMI

  Small radius type that prevents cutter marks on resin

  • Volume Discount

  • Non-Coated
  • Resin
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 10	0.2	3 ～ 30	2	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	3 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	±0.02

  From: 964,625 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Short with Corner Radius

  OSG

  2-Flute Short Corner Radius CBN-CR-EDS·Demonstrates high performance in machining high-rigid materials

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	0.2 ～ 2	3 ～ 6	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	No torsion	-

  From: 6,857,447 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills 3 Flutes for Aluminum Alloys

  OSG

  Strain generation is suppressed by the R of the shank side flange.Work Material Aluminum/CopperCoating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Corner/Ball radius (mm) 1Number of flutes (pcs.) 3

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  18 ～ 22	1	18 ～ 22	3	51 ～ 60	Aluminum[◎] / Copper[◎]	10 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	No torsion	-

  From: 4,619,172 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

  OSG

  High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,668,182 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills DG Coated 2/4 Flutes Long Neck/Pencil Neck Corner Radius

  OSG

  Carbide end mill radius type suitable for diamond coating dedicated to graphite.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 12	0.1 ～ 1	0.9 ～ 12	2 ～ 4	50 ～ 150	Graphite[◎]	4 ～ 12	4 ～ 60	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 3,303,708 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPRS25NSP Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 25° Torsion

  UNION TOOL

  [Features]· For Machining Aluminum/Resin· Non-coated, R0.1 corner radius, long-neck radius· Subtle corner rounding suppresses lasting bottom cutter marks

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.1	3 ～ 16	2	38 ～ 90	High Hardness Steel-HRC65[○] / Aluminum[◎] / Resin[◎]	3 ～ 12	6 ～ 35	Plane / Side / Groove	Non-Coated	Long-Neck Radius	Weak torsion (15 to 25˚)	-

  From: 1,225,917 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPRS30N Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 30° Torsion

  UNION TOOL

  [Features]· For Machining Aluminum/Resin· Non-Coated Long-Neck Radius· Surface roughness was emphasized in the design of this tool

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 10	0.2 ～ 0.8	5 ～ 12	2	50 ～ 80	Aluminum[◎] / Copper[○] / Resin[◎]	6 ～ 10	10 ～ 36	Plane / Side / Groove	Non-Coated	Long-Neck Radius	Standard torsion (30-40°)	-

  From: 1,487,396 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2 End Mill with Corner R, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  By adopting a long shank, it is possible to machine corner radius in deep parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Groove	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,415,785 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 22	0.4 ～ 5	9 ～ 33	3	80 ～ 200	Aluminum[◎] / Copper[○]	5.8 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 1,912,288 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.4 ～ 5	17 ～ 45	2	55 ～ 115	Aluminum[◎] / Copper[○]	6 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 1,526,543 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 4	9 ～ 33	3	60 ～ 120	Aluminum[◎] / Copper[○]	6 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 2,113,088 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 22	0.5 ～ 5	9 ～ 33	2	80 ～ 200	Aluminum[◎] / Copper[○]	5.8 ～ 20	-	Side	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 1,981,613 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367

  GUHRING

  [Features]· Carbide endmill dedicated for aluminum.· With oil holes for internal lubrication.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	1 ～ 2.5	-	3	57 ～ 104	Aluminum[◎] / Copper[◎]	6 ～ 20	21 ～ 44	-	Non-Coated	radius	Powerful Torsion (45°-60°)	-

  From: 1,475,846 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBRE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.It is possible to increase the depth of cut.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 6	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 4,730,712 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBREF-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.It is possible to increase the depth of cut.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 3	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 4,530,451 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBRE-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.High-efficiency machining is possible with high feed.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	-	1.5 ～ 2	3	50 ～ 70	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: 8,155,206 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBREF-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.High-efficiency machining is possible with high feed.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 2	-	0.5 ～ 1.5	3	50	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: 5,331,493 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

  KYOWA SEIKO

  [Specifications]· Shape: Radius End Mill (carbide)· Material: PCD Polycrystalline Diamond· Work materials: For carbide alloy machining[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2	-	0.5 ～ 1.5	2	50	-	4	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	No torsion	-

  From: 18,969,472 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSER-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 4	-	1 ～ 40	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,606,412 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSR-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	-	3 ～ 13	2	40 ～ 50	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,446,282 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steam Carbide Radius End Mill CT-STE4R (Z10)

  TAIYO-TOOL

  [Features]· The first two types available in the STREAM Series are "Carbide Square End Mill (Model Number: CT-STE4)" and "Carbide Radius End Mill (Model Number: CT-STE4R)", both adopting a unique anti-vibration blade (wave-type blade) that reduces chattering when cutting hard-to-cut materials or titanium. Coating with excellent heat and oxidation resistance.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	1 ～ 4	15 ～ 50	4	70 ～ 130	-	6 ～ 25	-	-	Non-Coated	radius	Standard torsion (30-40°)	0～-0.05

  From: 3,708,991 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Long-Neck Radius CBN-LR

  UNION TOOL

  [Features]· Adopts a CBN material ideal for machining high-hardness materials such as HSS.· Excellent abrasion resistance maintains excellent machined surface roughness, even over long periods of machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.6 ～ 0.8	0.02 ～ 0.05	0.3 ～ 0.56	2	45	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	-	Non-Coated	Long-Neck Radius	No torsion	Corner Radius Tolerance ±0.003 ～ Corner Radius Tolerance ±0.005

  From: 8,323,205 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating

  WATERMILLS

  [Features]·Strong twist.·Quieter and smoother cutting.·Can be used for both roughing and finishing.·The unique groove shape enables smooth chip shape and discharge.·Center cut.·It has a cylindrical second angle to prevent chattering.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.3 ～ 4	12 ～ 50	3	39 ～ 104	Aluminum[○] / Copper[○]	3 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	-

  From: 1,164,040 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SHR320 CBN High Efficiency Radius End Mill

  NS TOOL

  [Features]· 3 flutes and spiral-shaped corner R provide high accuracy and high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2	0.1 ～ 0.3	0.25 ～ 1	-	50 ～ 52	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	1.5 ～ 10	Plane / Groove	Non-Coated	radius	Weak torsion (15 to 25˚)	-0.005 to 0.005

  From: 4,445,826 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	MISUMI	NS TOOL	MISUMI	NS TOOL	ATOM	UNION TOOL	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	GUHRING	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	TAIYO-TOOL	UNION TOOL	WATERMILLS	NS TOOL
Product SeriesDòng sản phẩm	3 Flutes Short for Copper & Aluminum Alloys	Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill	SSR200 CBN Super Speed Radius End Mill	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	NSR-2 radius end mill	Radius End Mill 2-Flute	CBN-LRF High Grade 2-Flute Long Neck Radius	Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model	CBN End Mills 2 Flutes Short with Corner Radius	Carbide End Mills 3 Flutes for Aluminum Alloys	Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys	Micro Grain Carbide End Mills DG Coated 2/4 Flutes Long Neck/Pencil Neck Corner Radius	CPRS25NSP Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 25° Torsion	CPRS30N Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 30° Torsion	SCD2 End Mill with Corner R, 2-Flute, Non-Coated	Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type	Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type	Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367	CBN 2-Flute Corner Radius End Mill SBRE-2	CBN 2-Flute Corner Radius End Mill SBREF-2	CBN 3-Flute Corner Radius End Mill SBRE-3	CBN 3-Flute Corner Radius End Mill SBREF-3	PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2	End Mill with 2 Carbide Flutes and Corner Radius KSER-2	End Mill with 2 Carbide Flutes and Corner Radius KSR-2	Steam Carbide Radius End Mill CT-STE4R (Z10)	Carbide 2-Flute Long-Neck Radius CBN-LR	WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating	SHR320 CBN High Efficiency Radius End Mill
From	1,587,723 VND		3,612,558 VND	1,801,712 VND	1,763,394 VND	1,439,593 VND	3,096,583 VND			964,625 VND	6,857,447 VND	4,619,172 VND	1,668,182 VND	3,303,708 VND	1,225,917 VND	1,487,396 VND	1,415,785 VND	1,912,288 VND	1,526,543 VND	2,113,088 VND	1,981,613 VND	1,475,846 VND	4,730,712 VND	4,530,451 VND	8,155,206 VND	5,331,493 VND	18,969,472 VND	1,606,412 VND	1,446,282 VND	3,708,991 VND	8,323,205 VND	1,164,040 VND	4,445,826 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	12 Day(s)	6 Day(s) or more	12 Day(s)
SpecificationsĐặc điểm kĩ thuật		Non-Coated General Steel		Non-Coated Aluminum 3 Flutes				Non-Coated Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)	Non-Coated Resin 2 Flutes R (Regular)
Blade diameter (D)(φ)	3 ～ 20	2 ～ 20	0.2 ～ 2	5 ～ 22	1 ～ 6	1 ～ 6	-	2 ～ 12	2 ～ 12	1 ～ 10	3 ～ 6	18 ～ 22	3 ～ 20	0.5 ～ 12	2 ～ 12	4 ～ 10	4 ～ 12	6 ～ 22	6 ～ 20	6 ～ 20	6 ～ 22	6 ～ 20	0.3 ～ 6	0.3 ～ 3	3 ～ 6	0.3 ～ 2	0.5 ～ 2	1 ～ 4	1 ～ 6	6 ～ 25	0.6 ～ 0.8	3 ～ 20	0.5 ～ 2
R Size(mm)	0.2 ～ 3	0.1 ～ 3	0.02 ～ 0.5	0.5 ～ 2	0.2 ～ 2	0.1 ～ 2	-	0.2 ～ 1	0.2 ～ 1	0.2	0.2 ～ 2	1	0.5 ～ 3	0.1 ～ 1	0.1	0.2 ～ 0.8	0.2 ～ 2	0.4 ～ 5	0.4 ～ 5	0.5 ～ 4	0.5 ～ 5	1 ～ 2.5	-	-	-	-	-	-	-	1 ～ 4	0.02 ～ 0.05	0.3 ～ 4	0.1 ～ 0.3
Blade length (ℓ)(mm)	8 ～ 38	4 ～ 60	0.08 ～ 1.2	9 ～ 33	3 ～ 18	3 ～ 15	0.08 ～ 1.2	5 ～ 36	5 ～ 36	3 ～ 30	3 ～ 6	18 ～ 22	4.5 ～ 30	0.9 ～ 12	3 ～ 16	5 ～ 12	12 ～ 36	9 ～ 33	17 ～ 45	9 ～ 33	9 ～ 33	-	0.3 ～ 2	0.3 ～ 2	1.5 ～ 2	0.5 ～ 1.5	0.5 ～ 1.5	1 ～ 40	3 ～ 13	15 ～ 50	0.3 ～ 0.56	12 ～ 50	0.25 ～ 1
Number of flutes(sheet)	3	2 ～ 4	2	3	2	2	2	2	3	2	2	3	3	2 ～ 4	2	2	2	3	2	3	2	3	2	2	3	3	2	2	2	4	2	3	-
Overall Length (L)(mm)	50 ～ 105	40 ～ 125	48 ～ 53	80 ～ 200	45 ～ 60	45 ～ 60	50	40 ～ 80	40 ～ 80	50 ～ 80	45 ～ 50	51 ～ 60	50 ～ 125	50 ～ 150	38 ～ 90	50 ～ 80	70 ～ 110	80 ～ 200	55 ～ 115	60 ～ 120	80 ～ 200	57 ～ 104	50 ～ 60	50 ～ 60	50 ～ 70	50	50	50 ～ 80	40 ～ 50	70 ～ 130	45	39 ～ 104	50 ～ 52
work material	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Copper[◎] / Resin[○]	Graphite[◎]	High Hardness Steel-HRC65[○] / Aluminum[◎] / Resin[◎]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	-	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]
Shank diameter (d)(mm)	6 ～ 20	4 ～ 20	4	4 ～ 20	4 ～ 6	4 ～ 6	4	4 ～ 12	4 ～ 12	3 ～ 10	6	10 ～ 12	6 ～ 20	4 ～ 12	3 ～ 12	6 ～ 10	6 ～ 12	5.8 ～ 20	6 ～ 20	6 ～ 20	5.8 ～ 20	6 ～ 20	6	4	6	4	4	4 ～ 6	4 ～ 6	6 ～ 25	4	3 ～ 20	4
Underneck length (ℓ1)(mm)	-	-	0.5 ～ 10	-	-	-	-	23 ～ 50	23 ～ 50	-	-	-	-	4 ～ 60	6 ～ 35	10 ～ 36	-	-	-	-	-	21 ～ 44	-	-	-	-	-	-	-	-	-	-	1.5 ～ 10
Machining Application	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side / Groove	Plane / Groove	Side / Groove	Side / Groove	Side / Groove	Side	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	-	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Groove
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Type	radius	radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	No torsion	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)
R Precision(μm)	-	±0.02	0.005～-0.005	±0.02	0.02～-0.02	±0.02 ～ ±0.05	±2 ～ ±3	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	-	-	-	-	-	-	-	0.025～-0.025	0.025～-0.025	0.025～-0.025	0.025～-0.025	-	-	-	-	-	-	-	-	0～-0.05	Corner Radius Tolerance ±0.003 ～ Corner Radius Tolerance ±0.005	-	-0.005 to 0.005

Loading...Tải…