(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Carbide Radius End Mills（Coating：For General Steels (AlCrN, etc.)）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
16 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 3 ～ 30 2 50 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 4 ～ 12 - Plane / Side / Curved surface / Groove / Inclined Cuts For General Steels (AlCrN, etc.) radius Standard torsion (30-40°) ±0.02 From: 442,479 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide radius end mill, 4-flute / short model
MISUMI
The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.1 ～ 3 8 ～ 38 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 4 ～ 20 - Plane / Side / Curved surface / Inclined Cuts For General Steels (AlCrN, etc.) radius Standard torsion (30-40°) ±0.02 From: 574,958 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CNRS 4-flute radius for machining titanium and super heat-resistant alloys
UNION TOOL
[Features]· High Efficiency 4-Flute Radius for Machining Titanium / Super Heat Resistant Alloy· Life-span increasing UT coating suitable for heat resistant and difficult to cut materials· Variable split, high torsion and positive rake angle design enables stable machining· A blade design that reduces the cutting resistance in helical and inclined use, etc.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 - 16 ～ 26 - 90 ～ 120 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] 6 ～ 12 - Plane / Side / Curved surface / Groove For General Steels (AlCrN, etc.) - 45° - From: 2,981,984 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HGGVRX HG Coated Carbide High Helix Radius
SANKO MFG
[Features]· HGGCNX radius type.· Suitable for corner rounding or cutting curved surfaces.· High efficiency machining can be achieved due to a larger contact area than with a ball end mill, which increases the pick feed.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 25 0.5 ～ 3 9 ～ 56 4 50 ～ 140 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] 4 ～ 25 - Plane / Side / Curved surface / Groove / Inclined Cuts For General Steels (AlCrN, etc.) radius Powerful Torsion (45°-60°) 0～+0.04 From: 1,561,216 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL VL Multi-blade Radius 2.5D GSXVL6-R-2.5D
NACHI(FUJIKOSHI)
[Features]· Unequal division and unequal lead enable high-speed and high-grade processing.· For steel.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 20 0.3 ～ 3 15 ～ 50 6 50 ～ 100 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Cast Iron[○] 6 ～ 20 - - For General Steels (AlCrN, etc.) radius Other - From: 2,663,908 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0 ～ 16 0.2 ～ 2 16 ～ 48 3 60 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 6 ～ 16 - Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) radius Powerful Torsion (45°-60°) ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
MISUMI
4-Flute Radius for High-Efficiency and High-Speed Machining
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.2 ～ 2 18 ～ 38 4 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 6 ～ 12 - Plane / Side / Curved surface / Inclined Cuts For General Steels (AlCrN, etc.) radius Powerful Torsion (45°-60°) ±0.02 From: 720,684 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
MISUMI
Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining
- Volume Discount
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 20 0.2 ～ 3 4 ～ 45 4 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 4 ～ 20 - Plane / Side / Curved surface / Inclined Cuts For General Steels (AlCrN, etc.) radius Powerful Torsion (45°-60°) ±0.02 From: 519,316 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX, Radius, 2.5D, GSXVL4T-R-2.5D
NACHI(FUJIKOSHI)
[Notice] The use of unequal spacing and unequal leads, and a sharp cutting edge shape suppress chattering and are suitable for heat resistant alloys.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 20 0.3 ～ 3 15 ～ 50 4 50 ～ 100 Stainless Steel[◎] / Titanium[◎] 6 ～ 20 - Plane / Side / Curved surface For General Steels (AlCrN, etc.) radius Powerful Torsion (45°-60°) 0～-0.030 From: 2,279,635 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius
OSG
Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 10 ～ 20 0.5 ～ 1 10 ～ 20 2 32 ～ 58 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] 6 ～ 12 - Plane / Side / Curved surface / Groove / Plunging (Z feed) For General Steels (AlCrN, etc.) radius No torsion - From: 1,558,215 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Radius End Mill, 4-Flute HM-4R
KABUSYUUKOUGU
HM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and can process high hardness steel.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 5 ～ 12 0.5 ～ 3 13 ～ 30 4 50 ～ 75 High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] 6 ～ 12 - Side / Curved surface For General Steels (AlCrN, etc.) radius Standard torsion (30-40°) - From: 575,500 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL VL Long Shank Radius 1.5D GSXVLLS4-R-1.5D
NACHI(FUJIKOSHI)
[Features]· Minimizes chattering during machining on vertical walls or deep engraving, allowing highly efficient high-quality machining to be performed.· For steel.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 3 4.5 ～ 30 4 60 ～ 160 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Cast Iron[○] 6 ～ 20 15 ～ 100 - For General Steels (AlCrN, etc.) radius Other - From: 2,243,282 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX, Long Shank, Radius, 1.5D, for Ti/SUS, GSXVLLS4T-R-1.5D
NACHI(FUJIKOSHI)
[Features]·It suppresses chattering even in vertical wall and deep cavity milling, enabling high-efficiency and high-quality machining. ·For SUS and heat resistant alloys.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 3 4.5 ～ 30 4 60 ～ 160 Stainless Steel[○] / Titanium[○] 6 ～ 20 15 ～ 100 - For General Steels (AlCrN, etc.) radius Other - From: 2,243,282 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX, Multi-Flute, Radius, 2.5D, for Ti/SUS, GSXVL6T-R-2.5D
NACHI(FUJIKOSHI)
[Features]·High-speed and high-quality machining is possible with the use of unequal spacing and unequal leads. ·For SUS and heat resistant alloys.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 20 0.3 ～ 3 15 ～ 50 6 50 ～ 100 Stainless Steel[○] / Titanium[○] 6 ～ 20 - - For General Steels (AlCrN, etc.) radius Other - From: 2,663,908 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Blade Radius End Mill GSV MILL 4000-R-2.5D Type
SUMITOMO ELECTRIC HARDMETAL
[Features]· Demonstrates excellent vibration-proof performance in general purpose areas.· Using the same helix angle for each flute enables repolishing.· Vibration-proof end mill optimized to balance performance and cost.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6.0 mm - - - - general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] - - Plane / Side / Curved surface / Groove / Plunging (Z feed) For General Steels (AlCrN, etc.) - Standard torsion (30-40°) ± 0.02 From: 2,277,861 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide 4 Flute End Mill IC4MRS
THE CUT
[Features]· Outstanding cost performance.· Capable of machining a wide range of workpieces from raw materials up to alloy steel.· S3 coated for longer life.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 0.3 ～ 1 13 ～ 26 4 50 ～ 75 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] 6 ～ 12 - Side / Curved surface / Groove For General Steels (AlCrN, etc.) radius Standard torsion (30-40°) - From: 966,811 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | UNION TOOL | SANKO MFG | NACHI(FUJIKOSHI) | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | KABUSYUUKOUGU | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | SUMITOMO ELECTRIC HARDMETAL | THE CUT |
| Product SeriesDòng sản phẩm | (Economy series) XAL series carbide radius end mill, 2-flute / short model | (Economy series) XAL series carbide radius end mill, 4-flute / short model | CNRS 4-flute radius for machining titanium and super heat-resistant alloys | XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | XAL series carbide radius end mill, 4-flute, 45° torsion / regular model | XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model | GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius | |||||||||
| From | 442,479 VND | 574,958 VND | 2,981,984 VND | 1,561,216 VND | 2,663,908 VND | 720,684 VND | 519,316 VND | 2,279,635 VND | 1,558,215 VND | 575,500 VND | 2,243,282 VND | 2,243,282 VND | 2,663,908 VND | 2,277,861 VND | 966,811 VND | |
| Days to ShipSố ngày giao hàng | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
| ||||||||||||
| Blade diameter (D)(φ) | 1 ～ 12 | 3 ～ 20 | 6 ～ 12 | 4 ～ 25 | 6 ～ 20 | 0 ～ 16 | 4 ～ 12 | 2 ～ 20 | 6 ～ 20 | 10 ～ 20 | 5 ～ 12 | 3 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6.0 mm | 6 ～ 12 |
| R Size(mm) | 0.1 ～ 3 | 0.1 ～ 3 | - | 0.5 ～ 3 | 0.3 ～ 3 | 0.2 ～ 2 | 0.2 ～ 2 | 0.2 ～ 3 | 0.3 ～ 3 | 0.5 ～ 1 | 0.5 ～ 3 | 0.2 ～ 3 | 0.2 ～ 3 | 0.3 ～ 3 | - | 0.3 ～ 1 |
| Blade length (ℓ)(mm) | 3 ～ 30 | 8 ～ 38 | 16 ～ 26 | 9 ～ 56 | 15 ～ 50 | 16 ～ 48 | 18 ～ 38 | 4 ～ 45 | 15 ～ 50 | 10 ～ 20 | 13 ～ 30 | 4.5 ～ 30 | 4.5 ～ 30 | 15 ～ 50 | - | 13 ～ 26 |
| Number of flutes(sheet) | 2 | 4 | - | 4 | 6 | 3 | 4 | 4 | 4 | 2 | 4 | 4 | 4 | 6 | - | 4 |
| Overall Length (L)(mm) | 50 ～ 75 | 50 ～ 100 | 90 ～ 120 | 50 ～ 140 | 50 ～ 100 | 60 ～ 110 | 60 ～ 100 | 50 ～ 110 | 50 ～ 100 | 32 ～ 58 | 50 ～ 75 | 60 ～ 160 | 60 ～ 160 | 50 ～ 100 | - | 50 ～ 75 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Cast Iron[○] | Stainless Steel[○] / Titanium[○] | Stainless Steel[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] |
| Shank diameter (d)(mm) | 4 ～ 12 | 4 ～ 20 | 6 ～ 12 | 4 ～ 25 | 6 ～ 20 | 6 ～ 16 | 6 ～ 12 | 4 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | - | 6 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | 15 ～ 100 | 15 ～ 100 | - | - | - |
| Machining Application | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | - | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Side / Curved surface | - | - | - | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Side / Curved surface / Groove |
| Coating | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) |
| Type | radius | radius | - | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | - | radius |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | 45° | Powerful Torsion (45°-60°) | Other | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | No torsion | Standard torsion (30-40°) | Other | Other | Other | Standard torsion (30-40°) | Standard torsion (30-40°) |
| R Precision(μm) | ±0.02 | ±0.02 | - | 0～+0.04 | - | ±0.02 | ±0.02 | ±0.02 | 0～-0.030 | - | - | - | - | - | ± 0.02 | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- R0.02
- 0.03
- 0.05
- R0.05
- 0.1
- R0.1
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.4
- 0.5
- R0.5
- 0.6
- 0.7
- 0.75
- 0.76
- 0.8
- 0.813
- 0.9
- 1
- R1
- R1.0
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- R2.0
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3.0
- R3
- 3.05
- 3.2
- 3.5
- R3.5
- 4
- R4.0
- R4
- 5
- R5
- 6
- R6
- 6.35
- 6.5
- 8
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.45
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.25
- 1.4
- 1.44
- 1.5
- 1.6
- 1.75
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 3.8
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy