(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Carbide Radius End Mills（Coating：TiAlN）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
48 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill
NS TOOL
[Features]・ From middle roughing to precision-finish machining, stable high-speed cutting is possible with less chattering, improving surface finish precision.・ Ultra high accuracy of R accuracy of ±5 μm.・ The tuned MUGEN coating shows its power in a wide range of areas from direct engraving of hardened and heat-treated steel to copper electrode machining.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.2 ～ 3 0.05 ～ 0.5 0.15 ～ 2.5 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 4 ～ 6 1 ～ 60 Plane / Side / Curved surface / Groove / Plunging (Z feed) TiAlN Tapered neck radius Standard torsion (30-40°) 0.005～-0.005 From: 1,481,101 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Corner Radius End Mill [4SUR]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456319.jpg?$product_view_b$)
HANSONG M&T
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 20 R0.1 ～ R4.0 2.5 ～ 38 4 50 ～ 100 - 6 ～ 20 - - TiAlN radius 43° ±0.02 From: 1,124,130 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 2.5 ～ 26 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] 4 ～ 12 - Plane / Side / Curved surface / Groove / Plunging (Z feed) TiAlN radius Standard torsion (30-40°) - From: 1,631,002 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 20 0.1 ～ 2 2.5 ～ 48 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] 6 ～ 20 - Plane / Side / Groove / Plunging (Z feed) TiAlN radius - - From: 694,540 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)
OSG
Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 3 8 ～ 38 4 60 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] 6 ～ 20 - Plane / Side / Curved surface TiAlN radius Powerful Torsion (45°-60°) - From: 2,491,666 VND Days to Ship: Số ngày giao hàng: 15 Day(s) or more
15 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Ideal for corner rounding and high-speed contour machining of molds and machine parts.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.2 ～ 2 7.5 ～ 26 4 45 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] 6 ～ 12 - Plane / Side / Curved surface TiAlN radius Standard torsion (30-40°) 0～-0.030 ～ 0～-0.015 From: 1,438,216 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SCD2A End Mill with Corner R, 2-Flute, OK Coated
OKAZAKI SEIKO
By adopting a long shank, it is possible to machine corner radius in deep parts.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.2 ～ 2 12 ～ 36 2 70 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] 6 ～ 12 - Plane / Groove TiAlN radius Standard torsion (30-40°) - From: 1,836,506 VND Days to Ship: Số ngày giao hàng: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose
OSG
Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 5 0.3 ～ 1 2 ～ 10 3 60 ～ 70 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] 6 4 ～ 15 Plane / Side / Curved surface / Groove / Plunging (Z feed) TiAlN radius Powerful Torsion (45°-60°) - From: 3,617,869 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface
OSG
Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 20 0.1 ～ 0.4 0.9 ～ 3.2 4 90 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] 6 ～ 20 9 ～ 30 Plane / Side / Curved surface TiAlN radius No torsion - From: 2,589,026 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 3 5 ～ 30 4 60 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] 6 ～ 20 9 ～ 60 Plane / Side / Curved surface TiAlN radius Powerful Torsion (45°-60°) - From: 2,041,359 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSRS230 MUGEN-COATING 2-Flute Radius End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Straight and corner radius machining are possible at the same time.・ ø6 size has been added to the long-selling 2 × D flute, 2-flute corner radius end mill.・ You can select the tool that suits the machining application purpose.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 5 0.1 ～ 1.5 2 ～ 10 2 60 ～ 70 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 4 ～ 6 - Plane / Side / Curved surface / Groove / Plunging (Z feed) TiAlN radius Standard torsion (30-40°) 0.005～-0.005 ～ 0.01～-0.01 From: 1,300,316 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill
NS TOOL
[Features]・ The outer peripheral blade has a design that minimizes contact with the workpiece to prevent chattering.・ Compared with ball end mills, the pick feed can be made larger, achieving high efficiency machining.・ High accuracy of corner radius of ±5 μm (D2.5 or less)・ Due to the tuned MUGEN coating, it demonstrates outstanding power for machining hardened and heat-treated steel, and is also ideal for machining copper electrodes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.2 ～ 6 0.05 ～ 1 0.15 ～ 9 2 45 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 4 ～ 6 0.5 ～ 48 Plane / Side / Curved surface / Groove TiAlN Long-Neck Radius Standard torsion (30-40°) 0.005～-0.005 ～ 0.01～-0.01 From: 866,943 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GS MILL Roughing Radius GSRE-R
NACHI(FUJIKOSHI)
Ideal for high-efficiency roughing during contour machining and corner rounding of materials from steel to stainless steel.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 20 0.5 ～ 4 13 ～ 38 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] 6 ～ 20 - Plane / Side / Curved surface TiAlN radius Standard torsion (30-40°) - From: 2,724,564 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 20 0.2 ～ 2 13 ～ 38 6 ～ 8 50 ～ 100 Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] 6 ～ 20 - Plane / Side / Curved surface TiAlN radius Powerful Torsion (45°-60°) - From: 2,369,290 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 2 4.5 ～ 30 4 60 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] 6 ～ 20 12 ～ - Plane / Side / Curved surface TiAlN radius Standard torsion (30-40°) -0.032～-0.059 ～ -0.014～-0.028 From: 2,325,028 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Ideal for corner rounding and contour machining of molds and machine parts.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 3 8 ～ 38 4 50 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] 6 ～ 20 - Plane / Side / Curved surface TiAlN radius Standard torsion (30-40°) -0.032～-0.059 ～ -0.014～-0.028 From: 1,963,261 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.5 ～ 2.5 0.1 0.7 ～ 3.7 2 50 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] 6 1.5 ～ 5 Plane / Side / Curved surface / Groove / Plunging (Z feed) TiAlN radius Standard torsion (30-40°) - From: 1,797,033 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 20 0.5 ～ 3 20 ～ 56 2 90 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] 6 ～ 20 - Plane / Side / Curved surface / Groove / Plunging (Z feed) TiAlN radius Standard torsion (30-40°) - From: 3,101,480 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius
OSG
The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 0.2 ～ 1 13 ～ 26 4 90 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] 6 ～ 12 - Plane / Side / Curved surface TiAlN radius Powerful Torsion (45°-60°) - From: 4,045,000 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 16 ～ 20 0.5 ～ 3 48 ～ 56 4 140 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] 16 ～ 20 - Plane / Side / Curved surface TiAlN radius Standard torsion (30-40°) - From: 11,813,010 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The advanced "unequal lead" effect suppresses chatter and realizes amazing high efficiency machining.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 25 0.2 ～ 5 6 ～ 50 4 50 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] 6 ～ 25 - Plane / Side / Curved surface TiAlN radius Standard torsion (30-40°) - From: 2,274,865 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 13 0.5 ～ 3 0.8 ～ 5.5 3 ～ 4 60 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎] 6 ～ 12 5 ～ 24 Plane / Side / Curved surface / Groove / Plunging (Z feed) TiAlN radius No torsion - From: 1,901,667 VND Days to Ship: Số ngày giao hàng: 15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG
Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 0.5 ～ 1 9 ～ 18 4 50 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] 6 ～ 12 - Plane / Side / Curved surface TiAlN radius Powerful Torsion (45°-60°) - From: 2,359,454 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
WXS Coated Multiple Flutes Short Super
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Corner radius end mill with high rigidity for high speed machining. High-speed machining of hardened steel is also possible.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 25 0.2 ～ 3 15 ～ 50 6 ～ 8 90 ～ 180 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] 6 ～ 25 - Plane / Side / Curved surface TiAlN radius Powerful Torsion (45°-60°) - From: 4,149,996 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The advanced "unequal lead" effect suppresses chatter and realizes amazing high efficiency machining.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 25 0.3 ～ 5 12 ～ 50 6 50 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] 6 ～ 25 - Plane / Side / Curved surface TiAlN radius Standard torsion (30-40°) - From: 3,132,365 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose
OSG
Capable of high-efficiency, high-precision machining of wide standing walls using step cutting
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 10 0.5 15 4 130 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] 8 - Plane / Side / Curved surface TiAlN radius Powerful Torsion (45°-60°) - From: 4,444,485 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSRS430 MUGEN-COATING 4-Flute Radius End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Straight and corner radius machining possible at the same time・ A small diameter size has been added to the long-selling 2 × D flute length, 4-flute Corner radius end mill.・ A lineup of 31 sizes from ø1 to ø5 can improve the efficiency of fine machining.・ You can select the tool that suits the machining application purpose.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 0.1 ～ 3 12 ～ 24 4 80 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 6 ～ 12 - Plane / Side / Curved surface TiAlN radius Standard torsion (30-40°) 0.01～-0.01 From: 2,655,124 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MHR430R MUGEN-COATING 4-Flute Long Neck Radius End Mill
NS TOOL
[Features]・ Four-flute that further expands machining variations. Available in a total of 146 sizes.・ Dedicated design for short flute length. Contact with the workpiece is further reduced and chattering is suppressed.・ Corner R accuracy is high accuracy of ±5 μm. (D2.5 or less)・ Due to the tuned MUGEN coating, it demonstrates outstanding power for machining hardened and heat-treated steel, and is also ideal for machining copper electrodes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 6 0.05 ～ 1 0.8 ～ 5 4 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 4 ～ 6 3 ～ 48 Plane / Side / Curved surface TiAlN Long-Neck Radius Standard torsion (30-40°) 0.005～-0.005 ～ 0.01～-0.01 From: 1,336,512 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
SAGVR2T SA Coated Carbide Radius 2-Flute
SANKO MFG
[Features]· Ideal for corner rounding or cutting curved surfaces.· Can also be used to prevent chipped corners.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.5 ～ 5 10 ～ 45 2 50 ～ 115 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] 6 ～ 20 - Plane / Side / Curved surface / Groove / Inclined Cuts TiAlN radius Standard torsion (30-40°) 0～+0.04 From: 1,642,018 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank
SANKO MFG
[Features]· Suitable for corner rounding or cutting curved surfaces.· A long shank type which allows for machining in deep sections.· Finished surfaces can be improved and high-efficiency machining is possible.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 25 0.3 ～ 8 20 ～ 75 4 120 ～ 230 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] 6 ～ 25 - Plane / Side / Curved surface / Groove / Inclined Cuts TiAlN radius Standard torsion (30-40°) 0～+0.04 From: 3,310,003 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank
SANKO MFG
Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.[Features]· A long shank type which allows for machining in deep sections.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 25 0.3 ～ 8 20 ～ 75 2 120 ～ 230 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] 6 ～ 25 - Plane / Side / Curved surface / Groove / Inclined Cuts TiAlN radius Standard torsion (30-40°) 0～+0.04 From: 2,895,318 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SCE4A Ultra-Strong Radius, 4-Flute, OK Coated
OKAZAKI SEIKO
A multi-function type end mill that is capable of groove milling and side milling as well as profiling.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.5 ～ 2 8 ～ 24 4 70 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] 6 ～ 12 15 ～ 42 Plane / Side / Groove TiAlN radius Powerful Torsion (45°-60°) - From: 1,836,506 VND Days to Ship: Số ngày giao hàng: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 10 0.5 21 ～ 34 4 60 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] 6 ～ 10 - Side TiAlN radius Powerful Torsion (45°-60°) - From: 2,665,286 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 1 8 ～ 38 4 60 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] 6 ～ 20 - Side / Groove TiAlN radius Powerful Torsion (45°-60°) - From: 2,079,667 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill with 2 Carbide Flutes and Corner Radius KSRA-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.5 ～ 3 - 1.5 ～ 10 2 60 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] 3 - Plane / Side / Curved surface / Groove / Inclined Cuts TiAlN radius Standard torsion (30-40°) - From: 1,886,934 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill with 4 Carbide Flutes and Corner Radius KSRA-4
KYOWA SEIKO
[Features]A carbide end mill suitable for general steel, stainless steel, and other workpieces, 2 flutes, with corner R.It is resistant to breakage and chipping.The high cutting speed and high production efficiency lead to overall production cost reduction.[Applications]Suitable for slab milling, side milling, curved surface milling, grooving, and ramping.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 3 - 3 ～ 10 4 60 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] 3 - Plane / Side / Curved surface / Groove / Inclined Cuts TiAlN radius Standard torsion (30-40°) - From: 2,447,584 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coat, Carbide long neck radius end mill, 2 flutes
VAN HOORN
[Features]· Micro end mill ideal for machining deep ribs in materials up to HRC 55, available from 0.1 mm blade diameter up.· A long product life is achieved with new generation TiAlN coating and a newly designed blade tip shape.· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.1 ～ 2.5 0.03 ～ 0.2 0.2 ～ 3 2 64 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○] 4 ～ 6 0.2 ～ 25 - TiAlN Long-Neck Radius - - From: 1,003,436 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coat, Carbide long neck radius end mill, 4 flutes
VAN HOORN
[Features]· Micro end mill ideal for machining deep ribs in materials up to HRC 55.· 4-flute blade with a small blade diameter of 0.2 mm up is achieved. Compared to 2-flute type, this model has higher rigidity, longer tool service life, and achieves more efficient machining.· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.4 ～ 2 0.05 ～ 0.2 0.6 ～ 3 4 64 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○] 6 2 ～ 8 - TiAlN Long-Neck Radius - - From: 1,024,836 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Radius End Mill, 4-Flute GM-4R
KABUSYUUKOUGU
GM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and features the reasonable balance with the good cutting quality. It can extend the tool lifespan.
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.2 ～ 3 8 ～ 30 4 50 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 12 - Side / Curved surface TiAlN radius Standard torsion (30-40°) - From: 262,320 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, Long Flute, UVXL-TI-5FL-SL
OSG
[Features]·It supports grooving and side milling, complex pocket machining, and chatter-prone milling. It has achieved stability and high efficiency in titanium alloy machining, which has a high degree of difficulty. ·With grooved SAFE-LOCK, high runout accuracy (less than 3 µm), adjustable tool runout length, removable of broken tools, internal lubrication of holder, compatible with high-speed steel tools. [Applications]·Work material: Titanium alloy. [Specifications]·Helix angle: 41°/42°/43°, "Material": Cemented carbide (Carbide)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 12 ～ 25 1 ～ 5 48 ～ 100 5 110 ～ 190 Stainless Steel[○] / Titanium[◎] 12 ～ 25 60 ～ 125 - TiAlN radius Other - From: 6,441,416 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 4-Flute, UVX-TI-4FL-SL
OSG
[Features]·It supports grooving and side milling, complex pocket machining, and chatter-prone milling. It has achieved stability and high efficiency in titanium alloy machining, which has a high degree of difficulty. ·With grooved SAFE-LOCK, high runout accuracy (less than 3 µm), adjustable tool runout length, removable of broken tools, internal lubrication of holder, compatible with high-speed steel tools. [Applications]·Work material: Titanium alloy. [Specifications]·Helix angle: 40.5°/43.5°, "Material": Cemented carbide (Carbide)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 12 ～ 25 1 ～ 5 24 ～ 50 4 90 ～ 140 Stainless Steel[○] / Titanium[◎] 12 ～ 25 36 ～ 75 - TiAlN radius Other - From: 4,978,443 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL
OSG
[Features]·It supports grooving and side milling, complex pocket machining, and chatter-prone milling. It has achieved stability and high efficiency in titanium alloy machining, which has a high degree of difficulty. ·With grooved SAFE-LOCK, high runout accuracy (less than 3 µm), adjustable tool runout length, removable of broken tools, internal lubrication of holder, compatible with high-speed steel tools. [Applications]·Work material: Titanium alloy. [Specifications]·Helix angle: 40.5°/43.5°, "Material": Cemented carbide (Carbide)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 12 ～ 25 1 ～ 5 24 ～ 50 5 90 ～ 140 Stainless Steel[○] / Titanium[◎] 12 ～ 25 36 ～ 75 - TiAlN radius Other - From: 5,559,330 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Rib Corner Radius End Mill [2ARR (APRE2000R)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456038.jpg?$product_view_b$)
Rib Corner Radius End Mill [2ARR (APRE2000R)]
HANSONG M&T
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 R0.2 ～ R1.5 1.5 ～ 18 2 50 ～ 80 - 6 ～ 12 3 ～ 30 - TiAlN Long-Neck Radius 35° ±0.01 From: 998,704 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Corner Radius End Mill [2ACR (APEL2000R)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456049.jpg?$product_view_b$)
Corner Radius End Mill [2ACR (APEL2000R)]
HANSONG M&T
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 R0.5 ～ R1.0 13 ～ 26 2 90 ～ 110 - 6 ～ 12 - - TiAlN radius 35° ±0.01 From: 1,112,103 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
![Long Shank Corner Radius End Mill [2ALR (APLS2000R)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456050.jpg?$product_view_b$)
Long Shank Corner Radius End Mill [2ALR (APLS2000R)]
HANSONG M&T
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 R0.5 ～ R1.0 9 ～ 18 2 80 ～ 110 - 6 ～ 12 18 ～ 30 - TiAlN radius 35° ±0.01 From: 1,271,893 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
![Corner Radius End Mill [4SUR]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456319.jpg?$product_view_b$)
![Rib Corner Radius End Mill [2ARR (APRE2000R)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456038.jpg?$product_view_b$)
![Corner Radius End Mill [2ACR (APEL2000R)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456049.jpg?$product_view_b$)
![Long Shank Corner Radius End Mill [2ALR (APLS2000R)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456050.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Corner Radius End Mill [4SUR]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456319.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Rib Corner Radius End Mill [2ARR (APRE2000R)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456038.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![Corner Radius End Mill [2ACR (APEL2000R)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456049.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![Long Shank Corner Radius End Mill [2ALR (APLS2000R)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456050.jpg?$product_view_c$) | |
| BrandNhãn hiệu | NS TOOL | HANSONG M&T | OSG | YG 1 | OSG | NACHI(FUJIKOSHI) | OKAZAKI SEIKO | OSG | OSG | OSG | NS TOOL | NS TOOL | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | SANKO MFG | SANKO MFG | SANKO MFG | OKAZAKI SEIKO | DIJET | DIJET | KYOWA SEIKO | KYOWA SEIKO | VAN HOORN | VAN HOORN | KABUSYUUKOUGU | OSG | OSG | OSG | HANSONG M&T | HANSONG M&T | HANSONG M&T |
| Product SeriesDòng sản phẩm | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard) | Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface | ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank) | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius | Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard) | Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius | ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose | Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners) | Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners) | UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, Long Flute, UVXL-TI-5FL-SL | UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 4-Flute, UVX-TI-4FL-SL | UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL | |||||||||||||||||||||||||||||
| From | 1,481,101 VND | 1,124,130 VND | 1,631,002 VND | 694,540 VND | 2,491,666 VND | 1,438,216 VND | 1,836,506 VND | 3,617,869 VND | 2,589,026 VND | 2,041,359 VND | 1,300,316 VND | 866,943 VND | 2,724,564 VND | 2,369,290 VND | 2,325,028 VND | 1,963,261 VND | 1,797,033 VND | 3,101,480 VND | 4,045,000 VND | 11,813,010 VND | 2,274,865 VND | 1,901,667 VND | 2,359,454 VND | 4,149,996 VND | 3,132,365 VND | 4,444,485 VND | 2,655,124 VND | 1,336,512 VND | 1,642,018 VND | 3,310,003 VND | 2,895,318 VND | 1,836,506 VND | 2,665,286 VND | 2,079,667 VND | 1,886,934 VND | 2,447,584 VND | 1,003,436 VND | 1,024,836 VND | 262,320 VND | 6,441,416 VND | 4,978,443 VND | 5,559,330 VND | 998,704 VND | 1,112,103 VND | 1,271,893 VND |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 15 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 15 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) | 7 Day(s) |
| Blade diameter (D)(φ) | 0.2 ～ 3 | 1 ～ 20 | 1 ～ 12 | 1 ～ 20 | 3 ～ 20 | 3 ～ 12 | 4 ～ 12 | 1 ～ 5 | 6 ～ 20 | 3 ～ 20 | 1 ～ 5 | 0.2 ～ 6 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.5 ～ 2.5 | 6 ～ 20 | 6 ～ 12 | 16 ～ 20 | 3 ～ 25 | 2 ～ 13 | 6 ～ 12 | 6 ～ 25 | 6 ～ 25 | 10 | 6 ～ 12 | 1 ～ 6 | 3 ～ 20 | 6 ～ 25 | 6 ～ 25 | 4 ～ 12 | 6 ～ 10 | 3 ～ 20 | 0.5 ～ 3 | 1 ～ 3 | 0.1 ～ 2.5 | 0.4 ～ 2 | 3 ～ 12 | 12 ～ 25 | 12 ～ 25 | 12 ～ 25 | 1 ～ 12 | 6 ～ 12 | 6 ～ 12 |
| R Size(mm) | 0.05 ～ 0.5 | R0.1 ～ R4.0 | 0.1 ～ 3 | 0.1 ～ 2 | 0.2 ～ 3 | 0.2 ～ 2 | 0.2 ～ 2 | 0.3 ～ 1 | 0.1 ～ 0.4 | 0.2 ～ 3 | 0.1 ～ 1.5 | 0.05 ～ 1 | 0.5 ～ 4 | 0.2 ～ 2 | 0.2 ～ 2 | 0.2 ～ 3 | 0.1 | 0.5 ～ 3 | 0.2 ～ 1 | 0.5 ～ 3 | 0.2 ～ 5 | 0.5 ～ 3 | 0.5 ～ 1 | 0.2 ～ 3 | 0.3 ～ 5 | 0.5 | 0.1 ～ 3 | 0.05 ～ 1 | 0.5 ～ 5 | 0.3 ～ 8 | 0.3 ～ 8 | 0.5 ～ 2 | 0.5 | 0.2 ～ 1 | - | - | 0.03 ～ 0.2 | 0.05 ～ 0.2 | 0.2 ～ 3 | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | R0.2 ～ R1.5 | R0.5 ～ R1.0 | R0.5 ～ R1.0 |
| Blade length (ℓ)(mm) | 0.15 ～ 2.5 | 2.5 ～ 38 | 2.5 ～ 26 | 2.5 ～ 48 | 8 ～ 38 | 7.5 ～ 26 | 12 ～ 36 | 2 ～ 10 | 0.9 ～ 3.2 | 5 ～ 30 | 2 ～ 10 | 0.15 ～ 9 | 13 ～ 38 | 13 ～ 38 | 4.5 ～ 30 | 8 ～ 38 | 0.7 ～ 3.7 | 20 ～ 56 | 13 ～ 26 | 48 ～ 56 | 6 ～ 50 | 0.8 ～ 5.5 | 9 ～ 18 | 15 ～ 50 | 12 ～ 50 | 15 | 12 ～ 24 | 0.8 ～ 5 | 10 ～ 45 | 20 ～ 75 | 20 ～ 75 | 8 ～ 24 | 21 ～ 34 | 8 ～ 38 | 1.5 ～ 10 | 3 ～ 10 | 0.2 ～ 3 | 0.6 ～ 3 | 8 ～ 30 | 48 ～ 100 | 24 ～ 50 | 24 ～ 50 | 1.5 ～ 18 | 13 ～ 26 | 9 ～ 18 |
| Number of flutes(sheet) | 2 | 4 | 2 | 4 | 4 | 4 | 2 | 3 | 4 | 4 | 2 | 2 | 4 | 6 ～ 8 | 4 | 4 | 2 | 2 | 4 | 4 | 4 | 3 ～ 4 | 4 | 6 ～ 8 | 6 | 4 | 4 | 4 | 2 | 4 | 2 | 4 | 4 | 4 | 2 | 4 | 2 | 4 | 4 | 5 | 4 | 5 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 50 ～ 110 | 50 ～ 100 | 40 ～ 110 | 50 ～ 100 | 60 ～ 125 | 45 ～ 75 | 70 ～ 110 | 60 ～ 70 | 90 ～ 160 | 60 ～ 160 | 60 ～ 70 | 45 ～ 110 | 50 ～ 100 | 50 ～ 100 | 60 ～ 200 | 50 ～ 125 | 50 | 90 ～ 160 | 90 ～ 110 | 140 ～ 160 | 50 ～ 120 | 60 ～ 110 | 50 ～ 80 | 90 ～ 180 | 50 ～ 120 | 130 | 80 ～ 110 | 50 ～ 110 | 50 ～ 115 | 120 ～ 230 | 120 ～ 230 | 70 ～ 110 | 60 ～ 90 | 60 ～ 125 | 60 | 60 | 64 | 64 | 50 ～ 75 | 110 ～ 190 | 90 ～ 140 | 90 ～ 140 | 50 ～ 80 | 90 ～ 110 | 80 ～ 110 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | Stainless Steel[○] / Titanium[◎] | Stainless Steel[○] / Titanium[◎] | Stainless Steel[○] / Titanium[◎] | - | - | - |
| Shank diameter (d)(mm) | 4 ～ 6 | 6 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 | 6 ～ 20 | 6 ～ 20 | 4 ～ 6 | 4 ～ 6 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 | 6 ～ 20 | 6 ～ 12 | 16 ～ 20 | 6 ～ 25 | 6 ～ 12 | 6 ～ 12 | 6 ～ 25 | 6 ～ 25 | 8 | 6 ～ 12 | 4 ～ 6 | 6 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 12 | 6 ～ 10 | 6 ～ 20 | 3 | 3 | 4 ～ 6 | 6 | 4 ～ 12 | 12 ～ 25 | 12 ～ 25 | 12 ～ 25 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 |
| Underneck length (ℓ1)(mm) | 1 ～ 60 | - | - | - | - | - | - | 4 ～ 15 | 9 ～ 30 | 9 ～ 60 | - | 0.5 ～ 48 | - | - | 12 ～ - | - | 1.5 ～ 5 | - | - | - | - | 5 ～ 24 | - | - | - | - | - | 3 ～ 48 | - | - | - | 15 ～ 42 | - | - | - | - | 0.2 ～ 25 | 2 ～ 8 | - | 60 ～ 125 | 36 ～ 75 | 36 ～ 75 | 3 ～ 30 | - | 18 ～ 30 |
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | - | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Groove | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Groove | Side | Side / Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | - | - | Side / Curved surface | - | - | - | - | - | - |
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Type | Tapered neck radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius | radius | radius | radius | radius | Long-Neck Radius | radius | radius |
| Torsion Angle (θ) | Standard torsion (30-40°) | 43° | Standard torsion (30-40°) | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | No torsion | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | No torsion | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | - | Standard torsion (30-40°) | Other | Other | Other | 35° | 35° | 35° |
| R Precision(μm) | 0.005～-0.005 | ±0.02 | - | - | - | 0～-0.030 ～ 0～-0.015 | - | - | - | - | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | - | - | -0.032～-0.059 ～ -0.014～-0.028 | -0.032～-0.059 ～ -0.014～-0.028 | - | - | - | - | - | - | - | - | - | - | 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0～+0.04 | 0～+0.04 | 0～+0.04 | - | - | - | - | - | - | - | - | - | - | - | ±0.01 | ±0.01 | ±0.01 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- R0.02
- 0.03
- 0.05
- R0.05
- 0.1
- R0.1
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.4
- 0.5
- R0.5
- 0.6
- 0.7
- 0.75
- 0.76
- 0.8
- 0.813
- 0.9
- 1
- R1
- R1.0
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- R2.0
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3.0
- R3
- 3.05
- 3.2
- 3.5
- R3.5
- 4
- R4.0
- R4
- 5
- R5
- 6
- R6
- 6.35
- 6.5
- 8
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.45
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.25
- 1.4
- 1.44
- 1.5
- 1.6
- 1.75
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 3.8
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy