(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Long Neck Ball End Mills (Carbide)（Type：Long-Neck Ball）
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
52 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
[Features]・ Neck relief type suitable for narrow deep machining. Supports deep cutting precision 3D machining from low speed to high speed.・ Available in a total of 282 sizes.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 6 0.3 ～ 50 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / Side / Engraving / R Groove TiAlN Long-Neck Ball From: 589,345 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more 
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.08 ～ 4.8 0.3 ～ 60 3 ～ 6 2 45 ～ 120 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] -0.005～0.005 ～ -0.002～0.002 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 520,716 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
![Rib Ball End Mill [2HRB (HPRB)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455756.jpg?$product_view_b$)
Rib Ball End Mill [2HRB (HPRB)]
HANSONG M&T
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.05 ～ R6.0 0.1 ～ 12 0.3 ～ 70 3 ～ 12 2 45 ～ 110 - ±0.005 - TiSiN Long-Neck Ball From: 988,966 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Rib Ball End Mill [2KRB]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456184.jpg?$product_view_b$)
HANSONG M&T
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.05 ～ R2.0 0.1 ～ 4 0.3 ～ 25 4 ～ 6 2 45 ～ 60 - ±0.005 - A+ Long-Neck Ball From: 1,074,875 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Rib Ball End Mill [2DPB (DPRB)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455936.jpg?$product_view_b$)
Rib Ball End Mill [2DPB (DPRB)]
HANSONG M&T
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.1 ～ R6.0 0.2 ～ 25 1 ～ 60 4 ～ 12 2 45 ～ 200 - ±0.005 - DIA Long-Neck Ball From: 1,336,041 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck ball end mill, 2-flute / long neck model
MISUMI
[Features]·Long neck shape suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 8 0.2 ～ 60 3 ～ 8 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ Supports high hardness materials up to 68 HRC.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 6 0.2 ～ 50 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] 0.005～-0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 607,275 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
[Features]・ Three x flute length, 5 × D flute length, 10 × D flute length, super long neck, same diameter type, selectable according to the machining shape.・ Can also be used for non-ferrous materials such as aluminum and copper.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.6 ～ 30 2 ～ 80 3 ～ 6 2 50 ～ 130 Aluminum[◎] / Copper[◎] / Resin[◎] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / R Groove Non-Coated Long-Neck Ball From: 740,452 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
Short shank type (shrink fit) long neck ball end mill
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 1.5 0.15 ～ 2.5 0.5 ～ 20 4 2 35 ～ 50 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 0.005～-0.005 Curved surface / Side / Engraving / R Groove TiAlN Long-Neck Ball From: 686,354 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
- Volume Discount
- DIA
- Graphite
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.6 ～ 7.5 2 ～ 60 4 ～ 6 2 50 ～ 110 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] ±0.01 Curved surface / Side / Engraving / R Groove Dia Coat Long-Neck Ball From: 1,942,389 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
MISUMI
A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
- Volume Discount
- XAL
- General Steel
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 6 0.2 ～ 60 3 ～ 6 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Long-Neck Ball From: 373,047 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
MISUMI
High-performance MRC series is available in the industry's largest number of sizes
- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.07 ～ 6 0.2 ～ 60 4 ～ 6 2 50 ～ 110 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] ±0.005 Curved surface / Side / Engraving / R Groove MRC Long-Neck Ball From: 494,588 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.08 ～ 4.8 0.3 ～ 50 4 ～ 6 2 45 ～ 120 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] -0.005～+0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 443,333 VND Days to Ship: Số ngày giao hàng: Quote
Quote
-
You can add up to 6 items per a category to the compare list.
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.4 ～ 3 0.64 ～ 4.8 3 ～ 30 4 ～ 6 2 45 ～ 80 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.002～0.002 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 546,486 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Diamond Coating, Long-Neck Ball End Mill DCRB230
NS TOOL
[Features]・ By adopting a unique diamond coating, it has high durability against machining of graphite and high silicone aluminum alloy.・ Neck relief type suitable for narrow and deep machining
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.3 ～ 6 1 ～ 60 4 ～ 6 2 45 ～ 120 Aluminum[○] / Resin[○] 0.01～-0.01 Curved surface / Side / Engraving / R Groove Dia Coat Long-Neck Ball From: 2,727,320 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· Diamond coating for cemented carbide machining has outstanding hardness, toughness and adhesive strength.· Phenomenal deep cutting has been achieved through adoption of a blade shape optimized for cemented carbide.· Achieves tear-free, excellent machined surfaces, especially from medium rough to finish machining.[Material]· Ultrafine particle alloy (MG)
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.1 ～ R3 0.14 ～ 4.2 0.1 ～ 15 4 ～ 6 - 50 ～ 60 - - - - Long-Neck Ball From: 6,494,500 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 5 - 4 ～ 55 6 ～ 10 2 70 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] ±0.01 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD
OSG
[Features]・ Uses a dedicated graphite-only DG coating with excellent abrasion resistance.・ DG coating realizes low resistance with sharp cutting edge with little roundness. Controls chipping of the workpiece.・ Seamless shape that improves the quality of shape machining.・ An end mill with a diamond coating dedicated for graphite.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 2 0.6 ～ 6 4 ～ 60 4 2 50 ～ 100 Aluminum[○] / Graphite[◎] / Resin[◎] -0.01～+0.01 ～ -0.008～+0.008 Curved surface / Side / Engraving / R Groove DG Long-Neck Ball From: 3,932,030 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute WXL-LN-EBD
OSG
The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.08 ～ 6 0.3 ～ 50 3 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] -0.005～+0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Long-Neck Ball From: 463,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute DIA-LN-EBD
OSG
Long neck shaped ball end mill with ultra-microcrystalline diamond coating. Excellent durability in graphite machining. Also effective for copper and aluminum alloys.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 2.5 1.5 ～ 7.5 5 ～ 50 6 2 60 ～ 100 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] - Curved surface / Side / Engraving / R Groove Dia Coat Long-Neck Ball From: 5,718,638 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)
NS TOOL
[Features]2-flute long end mill.[Applications]Suitable for processing aluminum alloys, copper and resins.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 1.5 ～ 9 4 ～ 50 4 ～ 8 2 50 ～ 110 Aluminum[◎] / Copper[◎] / Resin[◎] 0.01～-0.01 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 2,013,031 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 3-Flute WXS
OSG
A long neck ball end mill with a WXS coat.A corner radius shape that achieves both cutting force and cutting edge rigidity.Peripheral cutting edge and bottom cutting edge specifications to suppress chattering vibration.A special edge line prevents encroachment.Optimal chip gullet for excellent chip removal capability.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 0.75 ～ 4.5 4 ～ 30 4 ～ 6 3 50 ～ 70 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] ±0.07 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball From: 727,862 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Union Tool, Carbide 2-Blade, Ball End Mill UDCLB F
UNION TOOL
[Features]· Long-neck ball-end mill that can cut cemented carbide and hard brittle material. (UDCLB top grade version)· Blade shape and diamond coating are newly improved and processing removal volume is greatly increased.· The groove provided at the tip of the ball provides an outstanding finished surface.· Special finish is given to the cutting edge to suppress chipping and step difference to the utmost. It supports a wide range of applications from semi-roughing to finishing.[Material]· Carbide ultra-fine particle alloy (Super MG)
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.3 ～ R1 0.42 ～ 1.4 1 ～ 20 4 - 50 ～ 60 - - - - Long-Neck Ball From: 10,007,911 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Rib Ball End Mill [2ARB (APRB)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456005.jpg?$product_view_b$)
Rib Ball End Mill [2ARB (APRB)]
HANSONG M&T
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type R0.2 ～ R2.0 0.4 ～ 4 1 ～ 30 4 ～ 6 2 45 ～ 70 - ±0.01 - TiAlN Long-Neck Ball From: 962,048 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CBN-LBF 2-Flute High Grade Long-Neck Ball
UNION TOOL
【特長】・高硬度材加工に最適なCBN素材の採用と刃形状の改良により、高精度で長寿命です。・優れた耐摩耗性と耐欠損性により、長時間加工でも良好な加工面粗さと精度を実現しました。・シャンク径公差：0/-0.004mm・ボールR精度：呼びRを基準とし±0.003mm
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.15 ～ 0.5 0.24 ～ 0.7 - 4 2 50 Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] ±3 - Non-Coated Long-Neck Ball From: 3,751,971 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long-Neck Ball End Mill For Copper Electrodes DRB230
NS TOOL
[Features]· A long-neck ball end mill with an exceptionally long tool life, offering high quality when machining copper electrodes.・ A long neck ball end mill specializing in the processing of copper alloys.・ The sharp blade shape and DLC coating enable long-term, high-quality and stable machining.・ It is also effective for processing copper tungsten electrodes.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.15 ～ 6 - 4 ～ 6 - 45 ～ 80 Copper[○] ±2 ～ ±3 Curved surface DLC Long-Neck Ball From: 1,369,182 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S
UNION TOOL
[Features] · Can be used for machining at short overhang lengths.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.16 ～ 4.8 0.5 ～ 20 4 ～ 6 2 35 ～ 50 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Titanium[○] / Copper[○] ±3 ～ ±5 - - Long-Neck Ball From: 512,665 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck ball end mill, 3-flute / long neck model
MISUMI
[Features]·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 0.8 ～ 4.8 3 ～ 50 4 ～ 6 2 ～ 3 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck ball end mill, 4-flute / long neck model
MISUMI
[Features]·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 3 1.6 ～ 6 4 ～ 30 4 ～ 6 4 50 ～ 70 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] -0.007 ~ +0.003 ～ ±0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Long-Neck Ball Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
CrN coated products that are ideal for copper electrode processing are available at affordable prices
- Volume Discount
- CrN
- Copper
- 2 Flutes
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 2 0.4 ～ 4 2 ～ 40 4 ～ 6 2 50 ～ 110 Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] ±0.005 Curved surface / Side / Engraving / R Groove CrN Long-Neck Ball From: 910,827 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck for Copper Work, Ball CURIBR
NACHI(FUJIKOSHI)
Ideal for fine processing of copper electrodes. Available in various sizes and can be used for all kinds of machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.2 ～ 6 0.5 ～ 50 4 ～ 6 2 45 ～ 120 Aluminum[◎] / Copper[◎] -0.007～+0.003 Curved surface / Side / Engraving / R Groove CrN Long-Neck Ball From: 1,072,515 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD
OSG
Also ideal for copper electrode machining that requires large protrusions as it has a short blade and long neck shape with high rigidity.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 2.5 1.5 ～ 7.5 3 ～ 40 6 2 60 ～ 90 Aluminum[○] / Copper[◎] / Resin[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove CrN Long-Neck Ball From: 2,300,832 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute CBN-LN-SXB
OSG
2-Flute Long Neck Ball End Type CBN-LN-SXB·Achieves deep cut milling even with small diameters. Good cutting quality.With the effect of spiral gash, both cutting edge strength and sharpness are achieved.·CBN sintered body is used for the flute material.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 1.5 0.3 ～ 1.8 2 ～ 15 4 ～ 6 2 45 ～ 50 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 4,049,865 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute CRN-LN-EBD-4
OSG
Ball end mill series with CrN coating with excellent lubricity. Ideal for fine machining of copper electrodes and IT parts.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 1 0.16 ～ 1.6 1 ～ 30 4 2 45 ～ 70 Aluminum[○] / Copper[◎] / Resin[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove CrN Long-Neck Ball From: 1,773,426 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute DLC-LN-EBD
OSG
Unique ultra-smooth DLC coating prevents welding. Achieves high speed in machining shapes such as aluminum alloys and provides a good finished surface.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 2 1.5 ～ 6 5 ～ 20 6 2 60 ～ 80 Aluminum[◎] / Resin[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove DLC Long-Neck Ball From: 2,263,062 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD
OSG
WXL coating with excellent lubricity and abrasion resistance. Can be used with a wide range of work materials and cutting applications
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 1.5 0.5 ～ 2.4 1.5 ～ 12 4 2 35 ～ 40 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] -0.005～+0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Long-Neck Ball From: 628,133 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute FX-LN-EBD-6
OSG
Ball end mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.25 ～ 3 0.5 ～ 6 2.5 ～ 30 6 2 60 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.005～+0.005 Curved surface / Side / Engraving / R Groove TiAlN Long-Neck Ball From: 2,798,335 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 2-Flute WX-LN-EBD
OSG
A long neck ball end mill whose length of cut can be freely selected according to the machining application shape. High-toughness carbide base material realizes stable cutting in a wide range of machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.16 ～ 4.8 0.5 ～ 50 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Long-Neck Ball From: 972,384 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Neck Ball Type, 4-Flute for Graphite DG-LN-EBM
OSG
End mill with diamond coating dedicated for graphite.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 1.5 3 ～ 4.5 10 ～ 20 4 4 50 ～ 60 Aluminum[◎] / Graphite[◎] / Resin[◎] -0.015～+0.015 Curved surface / Side / Engraving / R Groove DG Long-Neck Ball From: 3,932,030 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.32 ～ 6 2 ～ 80 4 ～ 6 2 45 ～ 120 Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] -0.01～0.01 Curved surface / Side / Engraving / R Groove Dia Coat Long-Neck Ball From: 1,822,016 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CPRB 2-Flute Long Neck Ball End Mill for Resin Machining
UNION TOOL
[Features]· Long Neck Ball End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 3 0.4 ～ 6 1 ～ 50 4 ～ 6 2 45 ～ 120 Aluminum[○] / Copper[◎] / Resin[◎] -0.01～0.01 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 876,385 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SSBL200 CBN Super Speed Long Neck Ball End Mill
NS TOOL
Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 1 0.08 ～ 1.2 0.3 ～ 10 4 2 50 ～ 53 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] 0.005～-0.005 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 4,551,697 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UT COAT 2-Flute Long-Neck Ball CSLEB
UNION TOOL
[Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 3 0.08 ～ 4.8 0.3 ～ 60 3 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] -0.005～0.005 ～ -0.002～0.002 Curved surface / Side / Engraving / R Groove TiCN Long-Neck Ball From: 520,716 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CFLB, UT Coat 3-Flute Long Neck Ball End Mill
UNION TOOL
[Features]· Provides amazing high feed compared to the conventional 2-flute long neck ball.· With new UTCOAT, outstanding lubricity and long life are achieved.· Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)· O.D. Tolerance: 0/-0.02
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 3 0.48 ～ 4.8 2 ～ 40 4 ～ 6 3 50 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] -0.007～0.007 ～ -0.005～0.005 Curved surface / Side / Engraving / R Groove TiCN Long-Neck Ball From: 902,746 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long-Neck Ball End Mill (for Deep Ribs) NHB-2
NS TOOL
It supports deep cutting precision 3D machining. A neck relief type suitable for narrow and deep machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.4 ～ 3 0.6 ～ 6 6 ～ 50 4 ～ 6 2 45 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] 0.01～-0.01 Curved surface / Side / Engraving / R Groove Non-Coated Long-Neck Ball From: 1,596,969 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
![Rib Ball End Mill [2HRB (HPRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455756.jpg?$product_view_b$)
![Rib Ball End Mill [2KRB]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456184.jpg?$product_view_b$)
![Rib Ball End Mill [2DPB (DPRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455936.jpg?$product_view_b$)
![Rib Ball End Mill [2ARB (APRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456005.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Rib Ball End Mill [2HRB (HPRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455756.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![Rib Ball End Mill [2KRB]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456184.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![Rib Ball End Mill [2DPB (DPRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455936.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Rib Ball End Mill [2ARB (APRB)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456005.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NS TOOL | UNION TOOL | HANSONG M&T | HANSONG M&T | HANSONG M&T | MISUMI | NS TOOL | NS TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | OSG | UNION TOOL | NS TOOL | UNION TOOL | MISUMI | OSG | OSG | OSG | NS TOOL | OSG | UNION TOOL | HANSONG M&T | UNION TOOL | NS TOOL | UNION TOOL | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | NS TOOL | UNION TOOL | UNION TOOL | NS TOOL |
| Product SeriesDòng sản phẩm | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | TSC series carbide long neck ball end mill, 2-flute / long neck model | MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting) | XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model | MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib) | TSC series carbide long neck ball end mill, 3-flute / long neck model | TSC series carbide long neck ball end mill, 4-flute / long neck model | Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD | DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill | ||||||||||||||||||||||||||||||||||
| From | 589,345 VND | 520,716 VND | 988,966 VND | 1,074,875 VND | 1,336,041 VND | 607,275 VND Special Price On Sale Till 31/03/2025 | 740,452 VND | 686,354 VND | 1,942,389 VND | 373,047 VND | 494,588 VND | 443,333 VND | 546,486 VND | 2,727,320 VND | 6,494,500 VND | 3,932,030 VND | 463,333 VND | 5,718,638 VND | 2,013,031 VND | 727,862 VND | 10,007,911 VND | 962,048 VND | 3,751,971 VND | 1,369,182 VND | 512,665 VND | 910,827 VND | 1,072,515 VND | 2,300,832 VND | 4,049,865 VND | 1,773,426 VND | 2,263,062 VND | 628,133 VND | 2,798,335 VND | 972,384 VND | 3,932,030 VND | 1,822,016 VND | 876,385 VND | 4,551,697 VND | 520,716 VND | 902,746 VND | 1,596,969 VND | ||||
| Days to ShipSố ngày giao hàng | 8 Day(s) or more | Same day or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | Same day or more | 8 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Quote | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
| R Size(mm) | 0.05 ～ 3 | 0.05 ～ 3 | R0.05 ～ R6.0 | R0.05 ～ R2.0 | R0.1 ～ R6.0 | 0.05 ～ 3 | 0.05 ～ 3 | 0.1 ～ 3 | 0.1 ～ 1.5 | 0.2 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.4 ～ 3 | 0.2 ～ 3 | R0.1 ～ R3 | 0.5 ～ 5 | 0.2 ～ 2 | 0.05 ～ 3 | 0.5 ～ 2.5 | 0.5 ～ 3 | 0.5 ～ 3 | R0.3 ～ R1 | R0.2 ～ R2.0 | 0.15 ～ 0.5 | 0.05 ～ 3 | 0.1 ～ 3 | 0.5 ～ 3 | 1 ～ 3 | 0.2 ～ 2 | 0.1 ～ 3 | 0.5 ～ 2.5 | 0.2 ～ 1.5 | 0.1 ～ 1 | 0.5 ～ 2 | 0.3 ～ 1.5 | 0.25 ～ 3 | 0.1 ～ 3 | 1 ～ 1.5 | 0.2 ～ 3 | 0.2 ～ 3 | 0.05 ～ 1 | 0.05 ～ 3 | 0.3 ～ 3 | 0.4 ～ 3 |
| Blade length (ℓ)(mm) | 0.07 ～ 6 | 0.08 ～ 4.8 | 0.1 ～ 12 | 0.1 ～ 4 | 0.2 ～ 25 | 0.07 ～ 8 | 0.07 ～ 6 | 0.6 ～ 30 | 0.15 ～ 2.5 | 0.6 ～ 7.5 | 0.07 ～ 6 | 0.07 ～ 6 | 0.08 ～ 4.8 | 0.64 ～ 4.8 | 0.3 ～ 6 | 0.14 ～ 4.2 | - | 0.6 ～ 6 | 0.08 ～ 6 | 1.5 ～ 7.5 | 1.5 ～ 9 | 0.75 ～ 4.5 | 0.42 ～ 1.4 | 0.4 ～ 4 | 0.24 ～ 0.7 | 0.15 ～ 6 | 0.16 ～ 4.8 | 0.8 ～ 4.8 | 1.6 ～ 6 | 0.4 ～ 4 | 0.2 ～ 6 | 1.5 ～ 7.5 | 0.3 ～ 1.8 | 0.16 ～ 1.6 | 1.5 ～ 6 | 0.5 ～ 2.4 | 0.5 ～ 6 | 0.16 ～ 4.8 | 3 ～ 4.5 | 0.32 ～ 6 | 0.4 ～ 6 | 0.08 ～ 1.2 | 0.08 ～ 4.8 | 0.48 ～ 4.8 | 0.6 ～ 6 |
| Underneck length (ℓ1)(mm) | 0.3 ～ 50 | 0.3 ～ 60 | 0.3 ～ 70 | 0.3 ～ 25 | 1 ～ 60 | 0.2 ～ 60 | 0.2 ～ 50 | 2 ～ 80 | 0.5 ～ 20 | 2 ～ 60 | 0.2 ～ 60 | 0.2 ～ 60 | 0.3 ～ 50 | 3 ～ 30 | 1 ～ 60 | 0.1 ～ 15 | 4 ～ 55 | 4 ～ 60 | 0.3 ～ 50 | 5 ～ 50 | 4 ～ 50 | 4 ～ 30 | 1 ～ 20 | 1 ～ 30 | - | - | 0.5 ～ 20 | 3 ～ 50 | 4 ～ 30 | 2 ～ 40 | 0.5 ～ 50 | 3 ～ 40 | 2 ～ 15 | 1 ～ 30 | 5 ～ 20 | 1.5 ～ 12 | 2.5 ～ 30 | 0.5 ～ 50 | 10 ～ 20 | 2 ～ 80 | 1 ～ 50 | 0.3 ～ 10 | 0.3 ～ 60 | 2 ～ 40 | 6 ～ 50 |
| Shank diameter (d)(mm) | 4 ～ 6 | 3 ～ 6 | 3 ～ 12 | 4 ～ 6 | 4 ～ 12 | 3 ～ 8 | 4 ～ 6 | 3 ～ 6 | 4 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 10 | 4 | 3 ～ 6 | 6 | 4 ～ 8 | 4 ～ 6 | 4 | 4 ～ 6 | 4 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 | 4 ～ 6 | 4 | 6 | 4 | 6 | 4 ～ 6 | 4 | 4 ～ 6 | 4 ～ 6 | 4 | 3 ～ 6 | 4 ～ 6 | 4 ～ 6 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | - | 2 | 2 | 2 | 2 | 2 | 3 | - | 2 | 2 | - | 2 | 2 ～ 3 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 3 | 2 |
| Overall Length (L)(mm) | 45 ～ 120 | 45 ～ 120 | 45 ～ 110 | 45 ～ 60 | 45 ～ 200 | 40 ～ 110 | 45 ～ 120 | 50 ～ 130 | 35 ～ 50 | 50 ～ 110 | 50 ～ 110 | 50 ～ 110 | 45 ～ 120 | 45 ～ 80 | 45 ～ 120 | 50 ～ 60 | 70 ～ 90 | 50 ～ 100 | 45 ～ 120 | 60 ～ 100 | 50 ～ 110 | 50 ～ 70 | 50 ～ 60 | 45 ～ 70 | 50 | 45 ～ 80 | 35 ～ 50 | 50 ～ 110 | 50 ～ 70 | 50 ～ 110 | 45 ～ 120 | 60 ～ 90 | 45 ～ 50 | 45 ～ 70 | 60 ～ 80 | 35 ～ 40 | 60 ～ 90 | 45 ～ 120 | 50 ～ 60 | 45 ～ 120 | 45 ～ 120 | 50 ～ 53 | 45 ～ 120 | 50 ～ 90 | 45 ～ 120 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | - | - | - | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Resin[○] | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] | - | - | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Copper[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Graphite[◎] / Resin[◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] |
| R Precision(μm) | 0.005～-0.005 ～ 0.01～-0.01 | -0.005～0.005 ～ -0.002～0.002 | ±0.005 | ±0.005 | ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | -0.005～+0.005 | -0.002～0.002 | 0.01～-0.01 | - | ±0.01 | -0.01～+0.01 ～ -0.008～+0.008 | -0.005～+0.005 | - | 0.01～-0.01 | ±0.07 | - | ±0.01 | ±3 | ±2 ～ ±3 | ±3 ～ ±5 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | -0.007～+0.003 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.015～+0.015 | -0.01～0.01 | -0.01～0.01 | 0.005～-0.005 | -0.005～0.005 ～ -0.002～0.002 | -0.007～0.007 ～ -0.005～0.005 | 0.01～-0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | - | - | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | - | - | - | Curved surface | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | TiAlN | For High Hardness (Silicon Group) | TiSiN | A+ | DIA | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | TiAlN | Dia Coat | For General Steels (AlCrN, etc.) | MRC | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Dia Coat | - | For High Hardness (Silicon Group) | DG | For General Steels (AlCrN, etc.) | Dia Coat | Non-Coated | For High Hardness (Silicon Group) | - | TiAlN | Non-Coated | DLC | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | CrN | CrN | CrN | Non-Coated | CrN | DLC | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | DG | Dia Coat | Non-Coated | Non-Coated | TiCN | TiCN | Non-Coated |
| Type | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
R Size(mm)
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- R0.075
- R0.08
- 0.1
- R0.1
- R0.125
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.35
- R0.35
- 0.4
- R0.4
- 0.45
- R0.45
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- R1.0
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.9
- 2
- R2
- R2.0
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.4
- 2.5
- R2.5
- 2.75
- R2.75
- 3
- R3
- R3.0
- 3.25
- R3.25
- 3.5
- R3.5
- 3.75
- R3.75
- 4
- R4
- R4.0
- 4.25
- R4.25
- 4.5
- R4.5
- 4.75
- 5
- R5
- R5.0
- 5.25
- 5.5
- R5.5
- 5.75
- 6
- R6
- R6.0
- 8
- 10
-
Blade length (ℓ)(mm)
-
0.06～0.96
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
- 2.9
-
3～3.85
- 3
- 3.2
- 3.5
- 3.7
- 3.75
- 3.85
-
4～4.8
- 4
- 4.2
- 4.5
- 4.8
-
5～5.3
- 5
- 5.2
- 5.3
-
6～6.7
- 6
- 6.7
-
7～7.5
- 7
- 7.5
-
8～8.2
- 8
- 8.2
-
9～9.7
- 9
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.2
- 11
- 11.2
-
12～12.7
- 12
- 12.7
-
13～13.5
- 13
- 13.5
-
14
-
15
-
16～16.5
- 16
- 16.5
-
18
-
20
-
22
-
24
-
25
-
30
-
35
-
38
-
40
-
45
-
50
-
55
-
60
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
R Precision(μm)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
- BLUE
- TiSiN
- FX
- DIA
- A+
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy