(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Ball End Mills (Carbide)（Type：Ball Page3）
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
218 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CAP-EBD
OSG
Ball end mill for copper, aluminum alloy, and plastic. Highly sharp with good chip discharge.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 10 2.5 ～ 38 - 4 ～ 20 2 60 ～ 180 Aluminum[◎] / Copper[◎] / Resin[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,882,212 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-EBD
OSG
Ball end mill that enables dry cutting of copper and copper alloy thanks to the CrN coating and sharp blade shape.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 6 0.4 ～ 22 - 4 ～ 12 2 60 ～ 140 Aluminum[○] / Copper[◎] / Resin[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove CrN Ball From: 2,407,650 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-HO-MG-EBD
OSG
The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 12 ～ 38 - 6 ～ 20 2 90 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,549,214 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FXS-HO-EBDS
OSG
A ball end mill for high hardness steel with a lubrication hole that maximizes the tool rigidity.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 6 ～ 20 - 6 ～ 20 2 90 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,716,032 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute DIA-PC-EBD
OSG
Pencil neck ball for ultra deep cutting of graphite electrodes. Ultra-fine crystal diamond coating realizes a dramatic extension of tool lifespan.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 2.5 ～ 12 30 ～ 150 6 ～ 12 3 100 ～ 220 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] - Curved surface / Side / Engraving / R Groove Dia Coat Ball From: 9,089,821 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-PC-MG-EBD
OSG
Due to the highly rigid pencil neck, good cutting is possible even with a large tool runout.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 6 0.6 ～ 22 10 ～ 80 6 ～ 16 2 60 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,101,874 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute WXL-PC-EBD
OSG
[Features]· WXL coating with excellent lubrication and wear resistance. Can be used with a wide range of work materials and cutting applications
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 6 0.16 ～ 12 1 ～ 80 4 ～ 16 2 45 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] -0.005 to +0.005 ～ -0.005～+0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Ball From: 805,371 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Pencil-neck Type, 2-Flute FX-PCL-EBD
OSG
It is a ball end mill for deep cutting that cannot be reached with ordinary end mills.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 6 8 ～ 22 100 ～ 140 10 ～ 16 2 200 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 9,290,082 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 3-Flute FXS-LS-EBT
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 12 ～ 38 - 6 ～ 20 3 140 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] -0.015～+0.015 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,454,985 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pencil-Neck Type, 3-Flute PHX-PC-DBT
OSG
Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 1.5 ～ 18 6 ～ 160.8 6 ～ 20 3 60 ～ 220 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] - Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Ball From: 2,341,749 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute FXS-EBT
OSG
The ball shape is composed of 3 flutes to the center to enable high efficiency machining with a 50% increase in table feed.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 10 5 ～ 38 - 4 ～ 20 3 50 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] -0.015～+0.015 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,624,435 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute PHX-DBT
OSG
Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 10 1.5 ～ 30 - 6 ～ 20 3 60 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,107,382 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 4-Flute for Graphite DG-EBM
OSG
End mill with diamond coating dedicated for graphite.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 5 8 ～ 20 - 4 ～ 10 4 80 ～ 100 Aluminum[○] / Graphite[◎] / Resin[◎] -0.015～+0.015 Curved surface / Side / Engraving DG Ball From: 4,030,193 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Long Ball Type , 2-Flute for Graphite GF-EBDL
OSG
Carbide, which has extremely excellent abrasion resistance, is used as the base material, achieving a long lifespan in graphite machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 20 ～ 130 25 ～ 80 6 ～ 12 2 100 ～ 200 Graphite[◎] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 5,151,298 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball-End Type, 2-Flute for Graphite GF-EBDR
OSG
Carbide, which has extremely excellent abrasion resistance, is used as the base material, achieving a long lifespan in graphite machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 10 ～ 65 20 ～ 85 4 ～ 12 2 75 ～ 130 Graphite[◎] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 4,216,684 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 2-Flute for Graphite D-GF-LS-EBDR
OSG
Diamond coating end mill for graphite machining. The manufacturer promises a wonderful extension of tool lifespan.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 10 ～ 65 25 ～ 130 4 ～ 12 2 100 ～ 200 Graphite[◎] - Curved surface / Side / Engraving / R Groove Dia Coat Ball From: 7,320,919 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 2-Flute for Graphite GF-LS-EBDR
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 10 ～ 65 25 ～ 130 4 ～ 12 2 100 ～ 200 Graphite[◎] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 4,884,350 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball-End Type, 2-Flute For finishing FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 1 ～ 12 2.5 ～ 30 6 ～ 12 2 50 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,277,619 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SFB200 CBN Super Finish Ball End Mill
NS TOOL
The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 1 0.15 ～ 1.2 0.5 ～ 5 4 2 50 ～ 52 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] 0.003～-0.003 ～ 0.005～-0.005 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 5,454,837 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]・ Short shank type. (Shrink fit)・ You can set many depths of cut and it is effective at high speed feed.・ Ball end mill designed for high speed and high hardness machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.2 ～ 6 0.5 ～ 15 4 ～ 6 2 35 ～ 45 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 866,943 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining
NS TOOL
[Features]・ Realized standardization from R size R0.005.・ Small ball end mill "micro ball" expands the micro machining area.・ A unique R shape is used to achieve a good finished surface.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.005 ～ 0.05 0.01 ～ 0.1 - 4 1 45 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] 0.002～-0.002 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,661,690 VND Days to Ship: Số ngày giao hàng: 12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Short shank type (shrink fit) long neck ball end mill
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 6 0.2 ～ 12 - 4 ～ 12 2 35 ～ 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 632,060 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSB230S MUGEN-COATING Short Ball End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ High-stiffness design enables high speed machining without chattering.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 6 0.2 ～ 12 - 4 ～ 12 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 812,648 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSBL230 MUGEN-COATING Long Ball End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the long ball end mill.・ The size is R0.1 to R5.・ Machining that makes use of the long shank is possible.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 5 0.5 ～ 25 - 3 ～ 10 2 70 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 0.01～-0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,022,867 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels
NS TOOL
[Features]・ Ball end mill designed for high speed and high hardness machining.・ Many cuts can be set, and it is effective at high speed feed.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.2 ～ 6 0.5 ～ 15 4 ～ 6 2 50 ～ 60 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○] 0.005～-0.005 ～ 0.01～-0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 975,335 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 0.9 0.8 ～ 3.6 - 3 2 35 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] 0.01～-0.01 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,700,837 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
X Coated Miniature Ball-End Mill NCB-2X
NS TOOL
Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.35 ～ 0.9 1.4 ～ 3.6 - 3 2 35 general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] 0.01～-0.01 Curved surface / Side / Engraving / R Groove TiCN Ball From: 2,824,696 VND Days to Ship: Số ngày giao hàng: 12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Ideal for high-precision 3D machining. All-purpose type for roughing/medium/finishing machining
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 3 ～ 15 - 4 ～ 12 2 60 ～ 110 general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] 0.01～-0.01 ～ 0.02～-0.02 Curved surface / Side / Engraving / R Groove TiCN Ball From: 1,742,542 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 4 ～ 6 20 ～ 30 - 8 ～ 12 2 130 ～ 180 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] 0.02～-0.02 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 3,865,342 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the extra long ball end mill. Machining that makes use of the long shank is possible.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 5 2.5 ～ 25 - 3 ～ 10 2 100 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] 0.02～-0.02 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,095,382 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Mill for Copper Electrode / Aluminum / Plastic DB
NS TOOL
Uses a very sharp cutting edge for outstanding nonferrous machining performance
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 2 ～ 12 - 4 ～ 6 2 45 ～ 80 Aluminum[◎] / Copper[◎] / Resin[◎] 0.01～-0.01 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,576,117 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type
EIKOSHA
Carbide ball end mill 2-flute standard type suitable for graphite electrode machining.[Features]·In addition to graphite electrodes, aluminum can also be cut.[Applications]·End mill for graphite electrode machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 15 8 ～ 60 - 4 ～ 25 2 60 ～ 180 Aluminum[◎] / Copper[◎] / Graphite[◎] ±0.02 Curved surface / Side / Engraving / R Groove - Ball From: 1,892,835 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Air Hole Ball End Mill 2-Flute, Standard Type
EIKOSHA
Graphite Electrode Milling, with Air Wheel
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 12.5 20 ～ 60 - 6 ～ 25 2 70 ～ 180 general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] ±0.02 Curved surface / Side / Engraving / R Groove - Ball From: 2,129,489 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Air Hole Ball End Mill 2-Flute, Long Type
EIKOSHA
Graphite Electrode Milling, Long, with Air Wheel
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3.25 ～ 12.5 40 ～ 80 - 6 ～ 25 2 150 ～ 250 general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] ±0.02 Curved surface / Side / Engraving / R Groove - Ball From: 4,009,538 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Air Hole Ball End Mill 4-Flute, Standard Type
EIKOSHA
Graphite Electrode Milling, with Air Wheel
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 12.5 20 ～ 60 - 6 ～ 25 4 70 ～ 180 general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] ±0.02 Curved surface / Side / Engraving / R Groove - Ball From: 2,315,192 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Air Hole Ball End Mill 4-Flute, Long Type
EIKOSHA
Graphite Electrode Milling, Long, with Air Wheel
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 12.5 40 ～ 80 - 6 ～ 25 4 150 ～ 250 general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] ±0.02 Curved surface / Side / Engraving / R Groove - Ball From: 4,244,815 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SAGCBE SA Coating Carbide 2-Flute Ball-Nose
SANKO MFG
[Features]· Machining is possible with a wide range of materials, from raw materials to hardened steel.· Also capable of high-speed machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 12.5 0.9 ～ 50 - 3 ～ 25 2 50 ～ 180 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] 0～-0.03 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 1,659,132 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank
SANKO MFG
Machining is possible with a wide range of materials, from raw materials to hardened steel. The long shank allows for machining in deep sections.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1.5 ～ 12.5 4.5 ～ 80 - 3 ～ 25 2 100 ～ 230 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] 0～-0.03 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,340,513 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SAGCBE4T SA Coated Carbide 4-Flute Ball
SANKO MFG
Machining is possible with a wide range of materials, from raw materials to hardened steel. 4-flute blade enables high-speed and high-efficiency machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 6 12 ～ 25 - 6 ～ 12 4 80 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] 0～-0.03 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,548,305 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Machining of hardened steel, high-speed machining, and high-efficiency machining are possible.Helix angle: Standard helix (30 to 44°)R Accuracy (µm)-30 to 0
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 10 0.9 ～ 40 - 3 ～ 20 2 50 ～ 160 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] 0～-0.03 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,520,248 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLGCALBE, DL-Coated Carbide 2-Flute for Aluminum, Ball Nose
SANKO MFG
DLC coating provides excellent abrasion resistance and surface lubricity, preventing weld adhesion. Ideal for machining aluminum.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 4 ～ 10 20 ～ 45 - 8 ～ 20 2 90 ～ 160 Aluminum[◎] / Copper[◎] 0～-0.03 Curved surface / Side / Engraving / R Groove DLC Ball From: 3,740,426 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GCALBE Carbide Ball for Aluminum Use
SANKO MFG
[Features]· The unique round shape discharges cutting chips smoothly and the center part has excellent sharpness, ideal for machining aluminum.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 15 ～ 45 - 6 ～ 20 2 80 ～ 160 Aluminum[◎] / Copper[◎] 0～-0.03 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 2,190,472 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL Ball End Mill GSXB20000 Type
SUMITOMO ELECTRIC HARDMETAL
Adopting low Co carbide base material improves rigidity and abrasion resistance at the same time. By adopting an ultra-smooth TiAlN diameter coat, abrasion resistance is improved and cutting force is reduced, enabling high-efficiency roughing.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 4 0.9 ～ 12 1.2 ～ 4 4 ～ 8 2 50 ～ 90 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] ±0.01 R Groove For General Steels (AlCrN, etc.) Ball From: 784,714 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Small Diameter Ball End Mill, 2-Flute
ATOM
Good surface roughness of the cutting edge realizes high quality finished surface.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 0.475 0.2 ～ 2.5 - 3 2 40 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,501,167 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Ball End Mill, 4-Flute
ATOM
Supports a wide range of applications, from general steel to nonferrous metals and resins. A multi-purpose type with support from rough machining to finish machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 10 3 ～ 40 - 4 ～ 20 2 40 ～ 105 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] ±0.01 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,624,903 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SUMITOMO ELECTRIC HARDMETAL | ATOM | ATOM |
| Product SeriesDòng sản phẩm | Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CAP-EBD | Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-EBD | NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining | MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting) | MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels | ||||||||||||||||||||||||||||||||||||||||
| From | 1,882,212 VND | 2,407,650 VND | 3,549,214 VND | 3,716,032 VND | 9,089,821 VND | 3,101,874 VND | 805,371 VND | 9,290,082 VND | 3,454,985 VND | 2,341,749 VND | 2,624,435 VND | 3,107,382 VND | 4,030,193 VND | 5,151,298 VND | 4,216,684 VND | 7,320,919 VND | 4,884,350 VND | 2,277,619 VND | 5,454,837 VND | 866,943 VND | 1,661,690 VND | 632,060 VND | 812,648 VND | 2,022,867 VND | 975,335 VND | 1,700,837 VND | 2,824,696 VND | 1,742,542 VND | 3,865,342 VND | 3,095,382 VND | 1,576,117 VND | 1,892,835 VND | 2,129,489 VND | 4,009,538 VND | 2,315,192 VND | 4,244,815 VND | 1,659,132 VND | 2,340,513 VND | 2,548,305 VND | 1,520,248 VND | 3,740,426 VND | 2,190,472 VND | 784,714 VND | 1,501,167 VND | 1,624,903 VND |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 12 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 12 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| R Size(mm) | 0.5 ～ 10 | 0.1 ～ 6 | 3 ～ 10 | 3 ～ 10 | 0.5 ～ 3 | 0.3 ～ 6 | 0.1 ～ 6 | 2 ～ 6 | 3 ～ 10 | 0.5 ～ 6 | 1 ～ 10 | 0.5 ～ 10 | 2 ～ 5 | 1 ～ 6 | 1 ～ 6 | 1 ～ 6 | 1 ～ 6 | 0.5 ～ 6 | 0.1 ～ 1 | 0.1 ～ 3 | 0.005 ～ 0.05 | 0.1 ～ 6 | 0.1 ～ 6 | 0.1 ～ 5 | 0.1 ～ 3 | 0.2 ～ 0.9 | 0.35 ～ 0.9 | 1 ～ 6 | 4 ～ 6 | 0.5 ～ 5 | 0.5 ～ 3 | 0.5 ～ 15 | 2 ～ 12.5 | 3.25 ～ 12.5 | 2 ～ 12.5 | 3 ～ 12.5 | 0.3 ～ 12.5 | 1.5 ～ 12.5 | 3 ～ 6 | 0.3 ～ 10 | 4 ～ 10 | 3 ～ 10 | 0.3 ～ 4 | 0.05 ～ 0.475 | 0.5 ～ 10 |
| Blade length (ℓ)(mm) | 2.5 ～ 38 | 0.4 ～ 22 | 12 ～ 38 | 6 ～ 20 | 2.5 ～ 12 | 0.6 ～ 22 | 0.16 ～ 12 | 8 ～ 22 | 12 ～ 38 | 1.5 ～ 18 | 5 ～ 38 | 1.5 ～ 30 | 8 ～ 20 | 20 ～ 130 | 10 ～ 65 | 10 ～ 65 | 10 ～ 65 | 1 ～ 12 | 0.15 ～ 1.2 | 0.2 ～ 6 | 0.01 ～ 0.1 | 0.2 ～ 12 | 0.2 ～ 12 | 0.5 ～ 25 | 0.2 ～ 6 | 0.8 ～ 3.6 | 1.4 ～ 3.6 | 3 ～ 15 | 20 ～ 30 | 2.5 ～ 25 | 2 ～ 12 | 8 ～ 60 | 20 ～ 60 | 40 ～ 80 | 20 ～ 60 | 40 ～ 80 | 0.9 ～ 50 | 4.5 ～ 80 | 12 ～ 25 | 0.9 ～ 40 | 20 ～ 45 | 15 ～ 45 | 0.9 ～ 12 | 0.2 ～ 2.5 | 3 ～ 40 |
| Underneck length (ℓ1)(mm) | - | - | - | - | 30 ～ 150 | 10 ～ 80 | 1 ～ 80 | 100 ～ 140 | - | 6 ～ 160.8 | - | - | - | 25 ～ 80 | 20 ～ 85 | 25 ～ 130 | 25 ～ 130 | 2.5 ～ 30 | 0.5 ～ 5 | 0.5 ～ 15 | - | - | - | - | 0.5 ～ 15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.2 ～ 4 | - | - |
| Shank diameter (d)(mm) | 4 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 16 | 4 ～ 16 | 10 ～ 16 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 6 ～ 20 | 4 ～ 10 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 4 | 4 ～ 6 | 4 | 4 ～ 12 | 4 ～ 12 | 3 ～ 10 | 4 ～ 6 | 3 | 3 | 4 ～ 12 | 8 ～ 12 | 3 ～ 10 | 4 ～ 6 | 4 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 3 ～ 25 | 3 ～ 25 | 6 ～ 12 | 3 ～ 20 | 8 ～ 20 | 6 ～ 20 | 4 ～ 8 | 3 | 4 ～ 20 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 60 ～ 180 | 60 ～ 140 | 90 ～ 160 | 90 ～ 160 | 100 ～ 220 | 60 ～ 160 | 45 ～ 160 | 200 ～ 250 | 140 ～ 250 | 60 ～ 220 | 50 ～ 160 | 60 ～ 200 | 80 ～ 100 | 100 ～ 200 | 75 ～ 130 | 100 ～ 200 | 100 ～ 200 | 50 ～ 80 | 50 ～ 52 | 35 ～ 45 | 45 | 35 ～ 60 | 50 ～ 110 | 70 ～ 200 | 50 ～ 60 | 35 | 35 | 60 ～ 110 | 130 ～ 180 | 100 ～ 250 | 45 ～ 80 | 60 ～ 180 | 70 ～ 180 | 150 ～ 250 | 70 ～ 180 | 150 ～ 250 | 50 ～ 180 | 100 ～ 230 | 80 ～ 110 | 50 ～ 160 | 90 ～ 160 | 80 ～ 160 | 50 ～ 90 | 40 | 40 ～ 105 |
| work material | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | Graphite[◎] | Graphite[◎] | Graphite[◎] | Graphite[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] | general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] |
| R Precision(μm) | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | - | -0.01～0.01 | -0.005 to +0.005 ～ -0.005～+0.005 | -0.01～0.01 | -0.015～+0.015 | - | -0.015～+0.015 | -0.01～+0.01 | -0.015～+0.015 | - | - | - | - | -0.01～+0.01 | 0.003～-0.003 ～ 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.002～-0.002 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 ～ 0.02～-0.02 | 0.02～-0.02 | 0.02～-0.02 | 0.01～-0.01 | ±0.02 | ±0.02 | ±0.02 | ±0.02 | ±0.02 | 0～-0.03 | 0～-0.03 | 0～-0.03 | 0～-0.03 | 0～-0.03 | 0～-0.03 | ±0.01 | - | ±0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | Non-Coated | CrN | TiAlN | TiAlN | Dia Coat | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | DG | Non-Coated | Non-Coated | Dia Coat | Non-Coated | TiAlN | Non-Coated | TiAlN | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiCN | TiCN | Non-Coated | TiAlN | Non-Coated | - | - | - | - | - | TiAlN | TiAlN | TiAlN | Non-Coated | DLC | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- R0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1.0
- 1.05
- 1.1
- R1.1
- 1.15
- 1.2
- R1.2
- 1.25
- R1.25
- 1.3
- R1.3
- 1.35
- 1.4
- R1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- R1.6
- 1.65
- 1.7
- R1.7
- 1.75
- R1.75
- 1.8
- R1.8
- 1.85
- 1.9
- R1.9
- 1.95
- 2
- R2
- R2.0
- 2.05
- 2.1
- R2.1
- 2.15
- 2.2
- R2.2
- 2.25
- R2.25
- 2.3
- R2.3
- 2.35
- R2.35
- 2.4
- R2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- R2.6
- 2.65
- 2.7
- R2.7
- 2.75
- R2.75
- 2.8
- R2.8
- 2.85
- 2.9
- R2.9
- 2.95
- 3
- R3
- R3.0
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- R4.0
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- R5.0
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- R6.0
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- R6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7.0
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8.0
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10.0
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.95
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.08
- 0.1
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.3
- 0.38
- 0.4
- 0.45
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.7
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.26
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.5
- 9
- 9.5
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12～12.5
- 12
- 12.5
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
63
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
[5-30/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
R Precision(μm)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
- AlTiN
- BLUE
- TiSiN
- X-coating
- Y coating
- FX
- DIA
- A+
-
Type
- Ball
- Tapered neck ball
- Spherical Ball
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy