Carbide Ball End Mills（Machining Application：Curved surface）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 2-flute / long neck model

  MISUMI

  [Features]·Long neck shape suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 8	0.2 ～ 60	3 ～ 8	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HM Coated 2-flute, Long Neck Ball HSLB

  UNION TOOL

  [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-0.005～0.005 ～ -0.002～0.002	Curved surface	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 520,716 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

  NS TOOL

  [Features]・ Neck relief type suitable for narrow deep machining. Supports deep cutting precision 3D machining from low speed to high speed.・ Available in a total of 282 sizes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.3 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface	TiAlN	Long-Neck Ball

  From: 589,345 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSB, HM Coated 2-Flute Ball

  UNION TOOL

  [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.03 ～ 6	0.06 ～ 22	-	4 ～ 12	2	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-0.007～0.007 ～ -0.002～0.002	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 513,634 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

  NS TOOL

  The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.01 ～ 0.05	0.02 ～ 0.1	-	4	1	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○]	-	Curved surface	Non-Coated	Ball

  From: 6,538,762 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]·General purpose 2-blade ball end mill for wide range of profiling·For surface coarse of workpiece, good surface finish can be expected after machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	TiAlN	Ball

  From: 517,970 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230 MUGEN-COATING 2-Flute Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Supports precision 3D machining from low speed to high speed.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface	TiAlN	Ball

  From: 569,109 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.007 to 0.003 ～ ±0.01	Curved surface	For General Steels (AlCrN, etc.)	Ball

  From: 483,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]·Regular bridge length allows for many regrinding times·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH345 3-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	1.5 ～ 10	-	6	3	60 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.01～-0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 1,697,886 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

  NS TOOL

  The tuned Infinity coating sustains high precision machining for a long time

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.1 ～ 10	-	4 ～ 6	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.002～-0.002	Curved surface	TiAlN	Ball

  From: 1,083,728 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT Coat, 2-flute Ball CSEB

  UNION TOOL

  [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.3 ～ 18	-	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface	TiCN	Ball

  From: 513,634 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Standard type ball end mill for high hardness. Ideal for finish machining・ Supports high hardness materials up to 68 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 595,863 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Ball End Mill (GS-EBD)

  OSG KOREA CORP

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 12.5	0.2 ～ 50	-	4 ～ 25	2	40 ～ 180	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Copper[○]	-	Curved surface	FX	Ball

  From: 752,214 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For General Steels (AlCrN, etc.)	Ball

  From: 328,423 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  • Volume Discount

  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	±0.005	Curved surface	Non-Coated	Ball

  From: 3,921,372 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  MRBH230 Long-Neck Ball, Hard (for High Hardness)

  NS TOOL

  [Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ Supports high hardness materials up to 68 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.005～-0.005	Curved surface	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 607,275 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RSB230 Ball-End Mill for Resin Clear Cut

  NS TOOL

  [Features]・ Three x flute length, 5 × D flute length, 10 × D flute length, super long neck, same diameter type, selectable according to the machining shape.・ Can also be used for non-ferrous materials such as aluminum and copper.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.6 ～ 30	2 ～ 80	3 ～ 6	2	50 ～ 130	Aluminum[◎] / Copper[◎] / Resin[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface	Non-Coated	Long-Neck Ball

  From: 740,452 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  MISUMI

  A type for aluminum that achieves high efficiency while having the affordable uncoated design

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	14 ～ 68	4 ～ 12	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	±0.01	Curved surface	Non-Coated	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

  MISUMI

  High-performance MRC series is available in the industry's largest number of sizes

  • Volume Discount

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	4 ～ 6	2	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	±0.005	Curved surface	MRC	Long-Neck Ball

  From: 494,588 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute MG-EBD-3

  OSG

  Uses high-toughness carbide with high transverse rupture strength.Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 1.5	0.2 ～ 8	-	3	2	40	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	Curved surface	Non-Coated	Ball

  From: 1,773,426 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD

  OSG

  Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 50	4 ～ 6	2	45 ～ 120	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-0.005～+0.005	Curved surface	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 443,333 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  HLB, HM Coat, 2-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 3	0.64 ～ 4.8	3 ～ 30	4 ～ 6	2	45 ～ 80	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.002～0.002	Curved surface	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 546,486 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

  NS TOOL

  Short shank type (shrink fit) long neck ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1.5	0.15 ～ 2.5	0.5 ～ 20	4	2	35 ～ 50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.005～-0.005	Curved surface	TiAlN	Long-Neck Ball

  From: 686,354 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Ball-End Mill ALB225

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The unique flute shape suppresses chattering during corner machining and side surface machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.45 ～ 24	3 ～ 60	4 ～ 12	2	60 ～ 120	Aluminum[◎] / Resin[○]	0.01～-0.01	Curved surface	Non-Coated	Ball

  From: 650,158 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coating, Long-Neck Ball End Mill DCRB230

  NS TOOL

  [Features]・ By adopting a unique diamond coating, it has high durability against machining of graphite and high silicone aluminum alloy.・ Neck relief type suitable for narrow and deep machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.3 ～ 6	1 ～ 60	4 ～ 6	2	45 ～ 120	Aluminum[○] / Resin[○]	0.01～-0.01	Curved surface	Dia Coat	Long-Neck Ball

  From: 2,727,320 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Graphite Solid Ball End Mill 2-Flute, Long Type

  EIKOSHA

  Graphite Electrode Milling, Long Handle

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 15	20 ～ 80	-	4 ～ 25	2	120 ～ 250	Aluminum[◎] / Copper[◎] / Graphite[◎]	±0.02	Curved surface	-	Ball

  From: 3,530,919 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Long shank type allows machining in deep places. In addition, OK hard coat enables machining of hardened steel up to 65 HRC

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	-	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 1,855,631 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.005 ~ +0.001 ～ ±0.003	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 1,240,084 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]·Compatible with shrink fit chucks for high-precision machining·Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 531,732 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability·For surface coarse of workpiece, good surface finish can be expected after machining.·Long shank type, ideal for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	TiAlN	Ball

  From: 996,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Long shank type ideal for deep cavity millingIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

  MISUMI

  A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 5	-	4 ～ 55	6 ～ 10	2	70 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Long-Neck Ball / Spherical Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 4-flute / regular model

  MISUMI

  [Features]·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

  MISUMI

  [Features]·High stiffness 2-flute type with length taper shape·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.15 ～ 5	0.3 ～ 8	2 ～ 60	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For High Hardness (Silicon Group)	Tapered neck ball

  From: 910,827 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.6 ～ 6	-	6	2	40	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	-0.005 ~ +0.001 ～ ±0.003	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 1,363,947 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

  MISUMI

  Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!

  • Volume Discount

  • DIA
  • Graphite
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.6 ～ 7.5	2 ～ 60	4 ～ 6	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface	Dia Coat	Long-Neck Ball

  From: 1,942,389 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model

  MISUMI

  A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	3 ～ 6	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: 373,047 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  • Volume Discount

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	±5 ～ ±10	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 437,250 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute for Graphite DG-EBD

  OSG

  [Features]・ Uses a dedicated graphite-only DG coating with excellent abrasion resistance.・ DG coating realizes low resistance with sharp cutting edge with little roundness. Controls chipping of the workpiece・ Seamless shape that improves the quality of shape machining・ An end mill with a diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 6	8 ～ 60	-	4 ～ 12	2	80 ～ 200	Aluminum[○] / Graphite[◎] / Resin[◎]	-0.01～+0.01	Curved surface	DG	Ball

  From: 4,128,357 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 3-Flute FXS-PC-EBT

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	2 ～ 12	20 ～ 85	6 ～ 16	3	70 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	-0.015～+0.015	Curved surface	TiAlN	Ball

  From: 3,013,153 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD

  OSG

  [Features]・ Uses a dedicated graphite-only DG coating with excellent abrasion resistance.・ DG coating realizes low resistance with sharp cutting edge with little roundness. Controls chipping of the workpiece.・ Seamless shape that improves the quality of shape machining.・ An end mill with a diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 2	0.6 ～ 6	4 ～ 60	4	2	50 ～ 100	Aluminum[○] / Graphite[◎] / Resin[◎]	-0.01～+0.01 ～ -0.008～+0.008	Curved surface	DG	Long-Neck Ball

  From: 3,932,030 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WXL-LN-EBD

  OSG

  The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 6	0.3 ～ 50	3 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.005～+0.005	Curved surface	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: 463,333 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute DIA-LN-EBD

  OSG

  Long neck shaped ball end mill with ultra-microcrystalline diamond coating. Excellent durability in graphite machining. Also effective for copper and aluminum alloys.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 2.5	1.5 ～ 7.5	5 ～ 50	6	2	60 ～ 100	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	-	Curved surface	Dia Coat	Long-Neck Ball

  From: 5,718,638 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HBL, HM Coated 2-Flute Long Shank Ball

  UNION TOOL

  [Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	4.5 ～ 25	-	3 ～ 12	2	80 ～ 200	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface	For High Hardness (Silicon Group)	Ball

  From: 1,712,050 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	UNION TOOL	NS TOOL	UNION TOOL	NS TOOL	MISUMI	NS TOOL	OSG	MISUMI	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	OSG KOREA CORP	MISUMI	MISUMI	NS TOOL	NS TOOL	MISUMI	MISUMI	OSG	OSG	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	OKAZAKI SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	UNION TOOL
Product SeriesDòng sản phẩm	TSC series carbide long neck ball end mill, 2-flute / long neck model	HM Coated 2-flute, Long Neck Ball HSLB	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	HSB, HM Coated 2-Flute Ball	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	XAC series carbide ball end mill, 2-flute / short model	MSB230 MUGEN-COATING 2-Flute Ball End Mill	Ball End Type, 2-Flute WXL-EBD	TSC series carbide ball end mill, regular model	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	UT Coat, 2-flute Ball CSEB	MSBH230 2-Flute Ball-End Mill for High-Hardness	2-Flute Ball End Mill (GS-EBD)	XAL series carbide ball end mill, 2-flute / short model	CBN Ball End Mill, 2-Flute	MRBH230 Long-Neck Ball, Hard (for High Hardness)	RSB230 Ball-End Mill for Resin Clear Cut	Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model	Ball End Type, 2-Flute MG-EBD-3	Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD	HLB, HM Coat, 2-Flute Long Neck Ball End Mill	MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)	Aluminum Ball-End Mill ALB225	Diamond Coating, Long-Neck Ball End Mill DCRB230	Carbide Graphite Solid Ball End Mill 2-Flute, Long Type	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model	TSC series carbide ball end mill, 4-flute / regular model	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)	XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	Ball End Type, 2-Flute for Graphite DG-EBD	Ball End Type, 3-Flute FXS-PC-EBT	Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD	Long Neck Ball Type, 2-Flute WXL-LN-EBD	Long Neck Ball Type, 2-Flute DIA-LN-EBD	HBL, HM Coated 2-Flute Long Shank Ball
From		520,716 VND	589,345 VND	513,634 VND	6,538,762 VND	517,970 VND	569,109 VND	483,333 VND		1,697,886 VND	1,083,728 VND	513,634 VND	595,863 VND	752,214 VND	328,423 VND Special Price On Sale Till 31/03/2025	3,921,372 VND	607,275 VND Special Price On Sale Till 31/03/2025	740,452 VND		494,588 VND	1,773,426 VND	443,333 VND	546,486 VND	686,354 VND	650,158 VND	2,727,320 VND	3,530,919 VND	1,855,631 VND	1,240,084 VND	531,732 VND	996,240 VND				910,827 VND	1,363,947 VND	1,942,389 VND	373,047 VND	437,250 VND	4,128,357 VND	3,013,153 VND	3,932,030 VND	463,333 VND	5,718,638 VND	1,712,050 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	Same day or more	8 Day(s) or more	6 Day(s) or more	12 Day(s)	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	Quote	7 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	TS General Steel 2 Flutes					TiAlN General Steel 2 Flutes S (Short)			TS General Steel 2 Flutes R (Regular)						XAL General Steel 2 Flutes	High-Hardness Steel 2 Flutes			Non-Coated Aluminum 2 Flutes S (Short)	MR General Steel 2 Flutes S (Short)									TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	DIA Graphite 2 Flutes	XAL General Steel 2 Flutes
R Size(mm)	0.05 ～ 3	0.05 ～ 3	0.05 ～ 3	0.03 ～ 6	0.01 ～ 0.05	0.2 ～ 12.5	0.05 ～ 6	0.05 ～ 10	0.2 ～ 8	0.5 ～ 3	0.05 ～ 3	0.1 ～ 6	0.05 ～ 6	0.05 ～ 12.5	0.05 ～ 10	0.3 ～ 1	0.05 ～ 3	0.1 ～ 3	0.5 ～ 6	0.05 ～ 3	0.05 ～ 1.5	0.05 ～ 3	0.4 ～ 3	0.1 ～ 1.5	0.3 ～ 6	0.2 ～ 3	1 ～ 15	1 ～ 12.5	1.5 ～ 3	0.2 ～ 6	2 ～ 8	0.5 ～ 12.5	0.5 ～ 5	1.5 ～ 6	0.15 ～ 5	0.3 ～ 3	0.2 ～ 3	0.05 ～ 3	0.5 ～ 12.5	2 ～ 6	1 ～ 6	0.2 ～ 2	0.05 ～ 3	0.5 ～ 2.5	1.5 ～ 6
Blade length (ℓ)(mm)	0.07 ～ 8	0.08 ～ 4.8	0.07 ～ 6	0.06 ～ 22	0.02 ～ 0.1	0.8 ～ 50	0.1 ～ 20	0.2 ～ 38	1.5 ～ 30	1.5 ～ 10	0.1 ～ 10	0.3 ～ 18	0.1 ～ 20	0.2 ～ 50	0.2 ～ 38	0.5 ～ 1.2	0.07 ～ 6	0.6 ～ 30	1.5 ～ 18	0.07 ～ 6	0.2 ～ 8	0.08 ～ 4.8	0.64 ～ 4.8	0.15 ～ 2.5	0.45 ～ 24	0.3 ～ 6	20 ～ 80	2 ～ 60	4.5 ～ 9	0.4 ～ 12	8 ～ 30	2 ～ 30	-	5 ～ 22	0.3 ～ 8	0.6 ～ 6	0.6 ～ 7.5	0.07 ～ 6	1 ～ 25	8 ～ 60	2 ～ 12	0.6 ～ 6	0.08 ～ 6	1.5 ～ 7.5	4.5 ～ 25
Underneck length (ℓ1)(mm)	0.2 ～ 60	0.3 ～ 60	0.3 ～ 50	-	-	-	-	-	17 ～ 80	-	-	-	-	-	-	1.5 ～ 5	0.2 ～ 50	2 ～ 80	14 ～ 68	0.2 ～ 60	-	0.3 ～ 50	3 ～ 30	0.5 ～ 20	3 ～ 60	1 ～ 60	-	14 ～ 21	-	-	-	15 ～ 80	4 ～ 55	17 ～ 72	2 ～ 60	-	2 ～ 60	0.2 ～ 60	2.2 ～ 50	-	20 ～ 85	4 ～ 60	0.3 ～ 50	5 ～ 50	-
Shank diameter (d)(mm)	3 ～ 8	3 ～ 6	4 ～ 6	4 ～ 12	4	3 ～ 25	4 ～ 12	4 ～ 20	4 ～ 16	6	4 ～ 6	4 ～ 12	4 ～ 12	4 ～ 25	3 ～ 20	4	4 ～ 6	3 ～ 6	4 ～ 12	4 ～ 6	3	4 ～ 6	4 ～ 6	4	4 ～ 12	4 ～ 6	4 ～ 25	6 ～ 25	6	4 ～ 12	4 ～ 16	3 ～ 25	6 ～ 10	6 ～ 12	4 ～ 12	6	4 ～ 6	3 ～ 6	4 ～ 25	4 ～ 12	6 ～ 16	4	3 ～ 6	6	3 ～ 12
Number of flutes(sheet)	2	2	2	2	1	2	2	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	4	2	2	2	2	2	2	3	2	2	2	2
Overall Length (L)(mm)	40 ～ 110	45 ～ 120	45 ～ 120	50 ～ 110	50	40 ～ 180	50 ～ 110	40 ～ 160	50 ～ 140	60 ～ 80	50 ～ 80	50 ～ 110	50 ～ 100	40 ～ 180	40 ～ 160	50	45 ～ 120	50 ～ 130	50 ～ 110	50 ～ 110	40	45 ～ 120	45 ～ 80	35 ～ 50	60 ～ 120	45 ～ 120	120 ～ 250	80 ～ 230	60 ～ 90	40 ～ 65	100 ～ 250	70 ～ 280	70 ～ 90	60 ～ 110	50 ～ 110	40	50 ～ 110	50 ～ 110	40 ～ 180	80 ～ 200	70 ～ 160	50 ～ 100	45 ～ 120	60 ～ 100	80 ～ 200
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Resin[○]	Aluminum[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[○] / Graphite[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	Aluminum[○] / Graphite[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]
R Precision(μm)	-0.007 ~ +0.003 ～ ±0.005	-0.005～0.005 ～ -0.002～0.002	0.005～-0.005 ～ 0.01～-0.01	-0.007～0.007 ～ -0.002～0.002	-	±0.01	0.005～-0.005 ～ 0.01～-0.01	-0.007 to 0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	0.01～-0.01	0.002～-0.002	-0.007～0.007 ～ -0.005～0.005	0.005～-0.005 ～ 0.01～-0.01	-	-0.007 ~ +0.003 ～ ±0.01	±0.005	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	±0.01	±0.005	-	-0.005～+0.005	-0.002～0.002	0.005～-0.005	0.01～-0.01	0.01～-0.01	±0.02	-	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.005 ~ +0.001 ～ ±0.003	±0.01	-0.007 ~ +0.003 ～ ±0.005	±5 ～ ±10	-0.01～+0.01	-0.015～+0.015	-0.01～+0.01 ～ -0.008～+0.008	-0.005～+0.005	-	-0.007～0.007 ～ -0.005～0.005
Machining Application	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiCN	For High Hardness (Silicon Group)	FX	For General Steels (AlCrN, etc.)	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	MRC	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Dia Coat	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Dia Coat	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	DG	TiAlN	DG	For General Steels (AlCrN, etc.)	Dia Coat	For High Hardness (Silicon Group)
Type	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Long-Neck Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball / Spherical Ball	Ball	Tapered neck ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball

Loading...Tải…