Multi-Function Square End Mills (Carbide)（work material：Aluminum）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 38	-	4 ～ 20	4	45 ～ 125	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: 518,387 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

  MISUMI

  Introducing a regular type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	4 ～ 48	-	4 ～ 12	4	45 ～ 105	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: 516,667 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	3	60 ～ 110	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

  MISUMI

  Introducing a long type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	5 ～ 60	-	4 ～ 12	4	45 ～ 105	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: 647,254 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 26	-	4 ～ 12	3	45 ～ 100	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: 502,956 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 25	4.5 ～ 85	-	3 ～ 25	2	45 ～ 160	Aluminum[◎]	Powerful Torsion (45°-60°)	Side / Groove	Non-Coated	Sharp Edge	Square

  From: 1,795,155 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 22	3.5 ～ 30	30 ～ 140	6 ～ 20	4	80 ～ 200	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  From: 1,281,371 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·This product has an intermediate flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (regular flute length), so it is called "SR flute length."·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	4	60 ～ 110	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	4	60 ～ 150	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  This product is long shank type and has a reduced neck diameter, making a deep cutting possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	15 ～ 80	6 ～ 20	3	70 ～ 800	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 1,358,411 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

  OKAZAKI SEIKO

  With a high-helix flute with reduced cutting force, it achieves a finished surface with little runout.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	4	45 ～ 120	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: 669,955 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 18	14 ～ 68	6 ～ 12	3	60 ～ 100	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 73	4 ～ 20	3	60 ～ 110	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	3	60 ～ 130	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	3	60 ～ 150	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	3.5 ～ 30	30 ～ 140	6 ～ 20	3	80 ～ 200	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: 1,659,215 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 16	1.5 ～ 24	14 ～ 74	6 ～ 16	4	60 ～ 110	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 72	4 ～ 20	4	60 ～ 110	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	4	60 ～ 130	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

  MISUMI

  Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

  • Volume Discount

  • TS
  • SUS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	7 ～ 35	-	6 ～ 16	3	60 ～ 105	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	C plane	Square

  From: 1,716,768 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

  MISUMI

  Ideal for the standing-wall finish of stainless steel

  • Volume Discount

  • TS
  • SUS
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	10.5 ～ 38	-	6 ～ 12	3	60 ～ 100	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Square

  From: 2,370,486 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

  MISUMI

  3-flute structure that's excellent in discharging chips

  • Volume Discount

  • DLC
  • Aluminum
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	17 ～ 50	4 ～ 12	3	40 ～ 80	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts / Countersinking	DLC	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

  MISUMI

  Given the rounded edge on the blade rear end, it suppresses machining streaks

  • Volume Discount

  • DLC
  • Aluminum
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 22	9 ～ 33	-	4 ～ 20	3	80 ～ 200	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	DLC	Micro R	Square

  From: 1,368,948 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

  MISUMI

  MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 26	-	6 ～ 12	4	60 ～ 100	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: 831,966 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Square End Mill

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Suppresses chattering with unequal lead and unequal flutes·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Stable machining is possible while maintaining finished surface accuracy·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	6 ～ 45	-	6 ～ 20	4	50 ～ 100	Aluminum[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: 865,528 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

  MISUMI

  [Features]・Adopts unequal leads to suppress chatter and achieve high efficiency machining・Optimum groove shape realizes smooth chip discharge・Minimum electrical conductivity・Can be re-polished.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	8 ～ 38	-	6 ～ 25	4	57 ～ 104	Aluminum[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: 857,445 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

  MISUMI

  [Features]·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	7 ～ 26	-	6 ～ 20	4	54 ～ 92	Aluminum[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: 762,567 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  High-helix type end mill with 3-flute, that uses a flute type for aluminum and a sharp corner specification.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 975,935 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

  OKAZAKI SEIKO

  Pure DLC coating prevents chip welding, providing a surprisingly long lifespan.High-helix type end mill with 3-flute, that uses a flute type for aluminum and a sharp corner specification.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	DLC	Sharp Edge	High Helical

  From: 1,540,904 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

  OKAZAKI SEIKO

  Pure DLC coating prevents chip welding, providing a surprisingly long lifespan.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	15 ～ 80	6 ～ 20	3	70 ～ 800	Aluminum[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	DLC	Sharp Edge	High Helical

  From: 2,370,274 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE3 High-Helix End Mill, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  3-flute type with high-torsion grooves enables everything from rough machining to finishing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 880,316 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4 High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  It is an end mill that can machine from non-ferrous materials to steel materials with a high-helix flute that reduces cutting force.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	4	45 ～ 120	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 880,316 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  High-helix groove with a long flute length enables to machine wide side surfaces and deep places.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	4	70 ～ 150	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 1,358,411 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  High-helix groove with a long flute length enables to machine wide side surfaces and deep places.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	4	70 ～ 150	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: 1,817,383 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  [Features]A slim shank high helical end mill made of cemented carbide, 4 flutes.It is resistant to chipping and can be used in a wide range of applications, from general steel to stainless steel.The slim shank design allows for flexible adjustment of the protrusion length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 22	8 ～ 32	-	4 ～ 20	4	70 ～ 150	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 1,434,906 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  The reverse design eliminates the risk of shank interference during mold pocket machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 22	12 ～ 32	-	6 ～ 20	4	80 ～ 150	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: 2,505,840 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

  OKAZAKI SEIKO

  Versatile 3-flute high-helix end mill that can handle roughing to finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	TiAlN	Sharp Edge	High Helical

  From: 669,955 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Middle Shank) (Under Neck) AL-SEE-MS2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	20 ～ 70	50 ～ 140	4 ～ 20	2	140 ～ 220	Aluminum[◎]	Powerful Torsion (45°-60°)	Side	Non-Coated	Sharp Edge	Square

  From: 4,531,055 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	16 ～ 60	-	6 ～ 20	2	60 ～ 130	Aluminum[◎]	Powerful Torsion (45°-60°)	Side / Groove	Non-Coated	Sharp Edge	Square

  From: 1,978,823 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.4 ～ 30	0.8 ～ 65	-	3 ～ 32	2	40 ～ 140	Aluminum[◎]	Powerful Torsion (45°-60°)	Side / Groove	Non-Coated	Sharp Edge	Square

  From: 898,726 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	5 ～ 38	-	6 ～ 25	3	55 ～ 130	Aluminum[◎]	Powerful Torsion (45°-60°)	Side / Groove / Plunging (Z feed)	Non-Coated	Sharp Edge	Square

  From: 1,231,003 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 22	5 ～ 33	-	4 ～ 20	3	70 ～ 200	Aluminum[◎]	Powerful Torsion (45°-60°)	Side / Groove	Non-Coated	Sharp Edge	Square

  From: 1,391,163 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining (Long Shank) (Slim Shank) (with Minute Corner Radius) AL-SEES3-LS-R02 Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 22	9 ～ 33	-	4 ～ 20	3	80 ～ 200	Aluminum[◎]	Powerful Torsion (45°-60°)	Side / Groove	Non-Coated	Micro R	Square

  From: 1,599,136 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver

  GUHRING

  [Features]· A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.· Furthermore, all of these processes can be done at high speed and high feed rate.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 20	11 ～ 38	18 ～ 52	6 ～ 20	-	57 ～ 104	Aluminum[○]	Variable lead	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	Micro R	Square

  From: 1,411,291 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA

  OKAZAKI SEIKO

  [Features]· Carbide end mills for plunge milling that enable non-step plunge cut feed, and further fluting as is.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  18	-	-	-	-	-	Aluminum[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove	TiAlN	-	High Helical

  From: 1,607,021 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	DIJET	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	GUHRING	OKAZAKI SEIKO
Product SeriesDòng sản phẩm	XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	SEE4 High-Helix End Mill, 4-Flute, Non-Coated	SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated	SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated	SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated	SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated	SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated	Solid End Mill for Aluminum Machining (Middle Shank) (Under Neck) AL-SEE-MS2 Type	Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type	Solid End Mill for Aluminum Machining (Regular Blade) AL-SEES2 Type	Solid End Mill for Aluminum Machining (Regular Blade) (with Recess) AL-SEEZ3 Type	Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type	Solid End Mill for Aluminum Machining (Long Shank) (Slim Shank) (with Minute Corner Radius) AL-SEES3-LS-R02 Type	High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver	Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA
From	518,387 VND Special Price On Sale Till 31/03/2025	516,667 VND		647,254 VND	502,956 VND	1,795,155 VND	1,281,371 VND			1,358,411 VND	669,955 VND					1,659,215 VND				1,716,768 VND	2,370,486 VND		1,368,948 VND	831,966 VND	865,528 VND	857,445 VND	762,567 VND	975,935 VND	1,540,904 VND	2,370,274 VND	880,316 VND	880,316 VND	1,358,411 VND	1,817,383 VND	1,434,906 VND	2,505,840 VND	669,955 VND	4,531,055 VND	1,978,823 VND	898,726 VND	1,231,003 VND	1,391,163 VND	1,599,136 VND	1,411,291 VND	1,607,021 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	Same day or more	4 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	10 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	Same day or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	XAL General Steel 4 Flutes		TS General Steel 3 Flutes SR		XAL General Steel 3 Flutes		TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes L (Long)			TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 3 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS SUS 3 Flutes S (Short)	TS SUS 3 Flutes R (Regular)	DLC Aluminum 3 Flutes S (Short)	DLC Aluminum 3 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	2 ～ 20	1 ～ 12	3 ～ 16	1 ～ 12	1 ～ 12	1 ～ 25	2 ～ 22	3 ～ 16	2 ～ 20	3 ～ 20	3 ～ 25	1 ～ 12	1 ～ 20	1 ～ 20	2 ～ 20	2 ～ 20	1 ～ 16	1 ～ 20	1 ～ 20	3 ～ 16	3 ～ 12	1 ～ 12	5 ～ 22	3 ～ 12	2 ～ 20	3 ～ 25	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 25	3 ～ 20	3 ～ 20	5 ～ 22	7 ～ 22	3 ～ 20	2 ～ 20	3 ～ 20	0.4 ～ 30	3 ～ 25	3 ～ 22	6 ～ 22	4 ～ 20	18
Blade length (ℓ)(mm)	5 ～ 38	4 ～ 48	5 ～ 40	5 ～ 60	1.5 ～ 26	4.5 ～ 85	3.5 ～ 30	5 ～ 40	5 ～ 75	10 ～ 45	10 ～ 50	1.5 ～ 18	3 ～ 38	4 ～ 56	5 ～ 75	3.5 ～ 30	1.5 ～ 24	3 ～ 38	4 ～ 56	7 ～ 35	10.5 ～ 38	2 ～ 24	9 ～ 33	8 ～ 26	6 ～ 45	8 ～ 38	7 ～ 26	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 50	15 ～ 80	15 ～ 80	8 ～ 32	12 ～ 32	10 ～ 45	20 ～ 70	16 ～ 60	0.8 ～ 65	5 ～ 38	5 ～ 33	9 ～ 33	11 ～ 38	-
Underneck length (ℓ1)(mm)	-	-	22 ～ 78	-	-	-	30 ～ 140	22 ～ 78	30 ～ 112	15 ～ 80	-	14 ～ 68	18 ～ 73	26 ～ 92	30 ～ 112	30 ～ 140	14 ～ 74	18 ～ 72	26 ～ 92	-	-	17 ～ 50	-	-	-	-	-	-	-	15 ～ 80	-	-	-	-	-	-	-	50 ～ 140	-	-	-	-	-	18 ～ 52	-
Shank diameter (d)(mm)	4 ～ 20	4 ～ 12	6 ～ 16	4 ～ 12	4 ～ 12	3 ～ 25	6 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 12	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 20	6 ～ 16	6 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	3 ～ 32	6 ～ 25	4 ～ 20	4 ～ 20	6 ～ 20	-
Number of flutes(sheet)	4	4	3	4	3	2	4	4	4	3	4	3	3	3	3	3	4	4	4	3	3	3	3	4	4	4	4	3	3	3	3	4	4	4	4	4	3	2	2	2	3	3	3	-	-
Overall Length (L)(mm)	45 ～ 125	45 ～ 105	60 ～ 110	45 ～ 105	45 ～ 100	45 ～ 160	80 ～ 200	60 ～ 110	60 ～ 150	70 ～ 800	45 ～ 120	60 ～ 100	60 ～ 110	60 ～ 130	60 ～ 150	80 ～ 200	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 105	60 ～ 100	40 ～ 80	80 ～ 200	60 ～ 100	50 ～ 100	57 ～ 104	54 ～ 92	45 ～ 105	45 ～ 105	70 ～ 800	45 ～ 105	45 ～ 120	70 ～ 150	70 ～ 150	70 ～ 150	80 ～ 150	45 ～ 105	140 ～ 220	60 ～ 130	40 ～ 140	55 ～ 130	70 ～ 200	80 ～ 200	57 ～ 104	-
work material	Aluminum[◎]	Aluminum[◎]	Aluminum[○]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[○]	Aluminum[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Variable lead	Powerful Torsion (45°-60°)
Machining Application	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Side	Side / Groove	Side / Groove	Side / Groove / Plunging (Z feed)	Side / Groove	Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove
Coating	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	DLC	For High Hardness (Silicon Group)	-	-	-	Non-Coated	DLC	DLC	Non-Coated	Non-Coated	Non-Coated	TiAlN	Non-Coated	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	TiAlN
Blade tip shape	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	C plane	C plane	With Lead	Micro R	With Lead	-	-	-	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Micro R	Micro R	-
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	High Helical

Loading...Tải…