(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Square End Mills (Carbide)（Torsion Angle (θ)：Standard torsion (30-40°)）
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
343 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 20 0.2 ～ 40 - 3 ～ 20 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 241,051 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
MISUMI
The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3.15 ～ 19.99 3.5 ～ 48 - 6 ～ 20 2 40 ～ 105 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts Non-Coated Sharp Edge / With Lead Square From: 820,745 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 18 2.5 ～ 32 - 3 ～ 20 4 38 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 540,666 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2 ～ 40 - 4 ～ 20 4 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 276,083 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MSE430 MUGEN-COATING 4-Flute End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the 4-flute end mill.・ A wide range of cutting is possible from raw materials to high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 2.5 ～ 30 - 4 ～ 12 4 45 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN With Lead Square From: 577,962 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ By applying a rigid lubricating film WXL coating, it is also effective for a wide range of cutting such as general steel, hardened steel and copper alloys.・ Recommended for both wet and dry processing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 30 2.5 ～ 45 - 4 ～ 32 4 40 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 428,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS
OSG
With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 20 8 ～ 38 - 6 ～ 20 3 50 ～ 105 Aluminum[◎] / Copper[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated With Lead Square From: 1,167,530 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 20 0.3 ～ 60 - 3 ～ 20 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 247,516 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_WX-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ This is a general-purpose 4-flute end mill that uses high-toughness carbide as the base material. It supports a wide range of work materials and realizes highly reliable machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 2.5 6 ～ 8 - 4 4 40 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 610,027 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN Coating is used for the 2-flute end mill.・ Capable of universal cutting, from roughing to finishing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 12 0.15 ～ 30 - 4 ～ 12 2 45 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 379,275 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 60 - 4 ～ 20 4 45 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 4-flute / short model
MISUMI
[Specification]·Standard TiAlN coating
- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 6 ～ 38 - 4 ～ 20 4 40 ～ 105 general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN Sharp Edge Square From: 384,307 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 12 0.4 ～ 24 17 ～ 45 3 ～ 12 2 35 ～ 75 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts / Countersinking Non-Coated Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2, 4-Flute Square End Mill (SUS-CUT)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2.5 ～ 48 - 6 ～ 20 2 ～ 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN - Long-Neck Square From: 506,516 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE
OSG
2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 20 0.3 ～ 60 - 4 ～ 20 2 45 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 285,000 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4SSV
THE CUT
[Features]· Gash land· Outstanding cost performance.· Capable of machining a wide range of workpieces from raw materials up to alloy steel.· TiAlN coated for a longer tool life.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 30 3 ～ 55 - 4 ～ 32 4 40 ～ 130 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] Standard torsion (30-40°) Side / Groove TiAlN - Square From: 474,771 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 12 2 ～ 48 - 4 ～ 12 2 45 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 308,613 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](//vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_b$)
CZS, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]· With the newly developed bottom blade shape, Z cuts can be processed on solid workpieces· Uses Chip-Resistant, High-Toughness Carbide Material· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 1.5 ～ 40 - 4 ～ 20 4 50 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts - With Lead Square From: 901,172 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
【Features】・Cutting resistance is maintained at a minimum by applying to New AITiN coating It has excellent abrasion resistance without fine without micro chipping. . It can be applied to materials under HRc50 and areas for various workpieces including pre -hardened steel, alloy steel, carbon steel, heat-resisting alloy steel, copper, reinforced plastics, etc. ・It adopts an edge shape with an excellent blade on high precision, machinability and processability.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 16 0.6 ～ 40 - 4 ～ 16 2 40 ～ 100 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts AlTiN - Square From: 487,139 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 30 0.2 ～ 60 - 4 ～ 32 2 45 ～ 140 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge Square From: 285,000 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 12 ～ 30 - 6 ～ 12 4 50 ～ 90 general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN Sharp Edge Square From: 671,026 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 1.5 ～ 30 - 4 ～ 20 3 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2.5 ～ 50 - 4 ～ 20 4 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 20 0.4 ～ 38 - 3 ～ 20 2 38 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge Square From: 463,077 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 2D GSX4C-2D
NACHI(FUJIKOSHI)
[Specifications]· Shape: Square end mill (carbide)· Coating: For General Steels (AlCrN, etc.)· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎][Applications] Flat surfaces / side surfaces / grooves / inclined cutting
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2 ～ 40 - 4 ～ 20 4 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A 2-flute end mill with a rigid lubricating film WXL coating. Effective for cutting not only steel but also copper alloys. A 4D flute length type that is recommended for both wet and dry machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 12 0.8 ～ 48 - 4 ～ 12 2 45 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 483,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
OSG
Can be used for a variety of cutter paths from high-precision, high-efficiency machining of the standing wall to helical machining, contouring machining and ramping machining. The amount of protrusion can be freely adjusted thanks to the fine-handle shank design.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 8 ～ 22 12 ～ 33 - 6 ～ 20 3 110 ～ 200 Aluminum[◎] / Copper[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated With Lead Square From: 2,439,912 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Flute Short Square End Mill (GS-EMS)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 25 2.5 ～ 45 - 6 ～ 25 4 40 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts FX - Square From: 572,324 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 16 2.5 ～ 40 - 6 ～ 16 4 50 ～ 100 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts AlTiN - Long-Neck Square From: 541,798 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Flute length 4D type supports deep cavity milling·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 4 ～ 48 29 ～ 76 4 ～ 12 2 45 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts / Countersinking For High Hardness (Silicon Group) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 4 ～ 48 - 4 ～ 12 4 45 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 490,172 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A general-purpose 2-flute end mill with FX coating that has excellent heat resistance.・ Supports a wide range of machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 30 0.4 ～ 45 - 3 ～ 32 2 40 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN Sharp Edge Square From: 1,429,954 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills 4 Flutes Short_MG-EMS
OSG
[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.[Specifications]·Blade diameters of 2 to 9.5 mm are sharp, and 10 to 25 mm are sharp.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 25 6 ～ 45 - 4 ～ 25 4 40 ～ 120 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts Non-Coated Sharp Edge / With Lead Square From: 1,360,709 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide square end mill, 2-flute / 2.5D Flute Length model
MISUMI
The lineup of fine intermediate flute length between short and regular is available only in Misumi
- Volume Discount
- TS
- General Steel
- 2 Flutes
- SR
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 12 1.25 ～ 30 20 ～ 55 4 ～ 12 2 45 ～ 85 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts / Countersinking For High Hardness (Silicon Group) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that produces high-quality finish supports a wide range of machining areas
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 12 0.6 ～ 36 23 ～ 55 3 ～ 12 2 40 ～ 85 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts / Countersinking Non-Coated Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC
NACHI(FUJIKOSHI)
End mill for aluminum, suitable for a wide range of side wall machining, grooving deep grooves or grooving in deep locations.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 20 12 ～ 56 - 6 ～ 20 2 50 ～ 125 Aluminum[◎] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts DLC Sharp Edge Square From: 1,325,693 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 3D GSX4C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 60 - 4 ～ 20 4 40 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL
OSG
[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.[Specifications]·Blade diameters of 6 to 12 mm are sharp, and 13 to 25 mm are sharp.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 25 12 ～ 67 - 6 ～ 25 2 50 ～ 140 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Sharp Edge / With Lead Square From: 1,433,889 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is 3 times the cutting diameter and features a 35° helix angle.・ A slightly stronger helix angle enables higher efficiency machining than standard helix.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 12 1.5 ～ 36 - 4 ～ 12 2 40 ～ 85 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts Non-Coated With Lead Square From: 870,110 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]· With a new groove shape, cutting chip discharge properties are improved· Use of chip-resistant, high-toughness carbide material and a new coating have provided significant improvements in terms of fracture resistance and wear resistance.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 1.5 ～ 36 - 4 ～ 12 2 45 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiCN With Lead Square From: 315,734 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Diamond Coating, 2-Blade End Mill DCSE235
NS TOOL
[Features]・ By adopting a unique diamond coating, it has high durability against machining of graphite and high silicone aluminum alloy.・ Square type with 3 × D flute length and suitable for narrow and deep machining
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 6 1.5 ～ 18 - 4 ～ 6 2 45 ～ 60 - Standard torsion (30-40°) Plane / Side / Groove Dia Coat With Lead Square From: 3,034,399 VND Days to Ship: Số ngày giao hàng: 12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING PREMIUM 2-Flute LEAD 30 End Mill MXH230
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Supports heat-resistant alloys such as stainless steel and titanium by adopting MUGEN Coating Premium.・ The flute length is twice the cutting diameter and features a 30° helix angle.・ Standard type that supports almighty regardless of groove or side surface.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 6 0.2 ～ 12 - 4 ～ 6 2 45 ～ 50 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove For High Hardness (Silicon Group) With Lead Square From: 433,373 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Focus on Accuracy / Finished Surface, for Automatic Lathes 2FESW
KYOCERA
[Features]A solid end mill suitable for general steel, stainless steel, and other workpieces, 2 flutes.The MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.The sharp edges can suppress burrs.[Applications]Suitable for automatic lathe finishing of general steel, stainless steel, aluminum, etc.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 13 3 ～ 8 - 4 ～ 13 2 35 ～ 45 general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] Standard torsion (30-40°) Plane / Side / Groove For General Steels (AlCrN, etc.) Sharp Edge Square From: 579,929 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill with 2 Carbide Flutes and Corner C Face KSC-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 6 3 ～ 13 - 4 ～ 6 2 40 ～ 50 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts Non-Coated C plane Square From: 1,346,152 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill with 2 Carbide Solid Blades KSE-2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 6 10 ～ 15 - 6 2 50 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking Non-Coated Sharp Edge Square From: 1,326,086 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://vn.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | NACHI(FUJIKOSHI) | MISUMI | NS TOOL | OSG | OSG | MISUMI | OSG | NS TOOL | MISUMI | MISUMI | MISUMI | YG 1 | OSG | THE CUT | MISUMI | UNION TOOL | YG 1 | OSG | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG KOREA CORP | YG 1 | MISUMI | MISUMI | OSG | OSG | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | NS TOOL | UNION TOOL | NS TOOL | NS TOOL | KYOCERA | KYOWA SEIKO | KYOWA SEIKO |
| Product SeriesDòng sản phẩm | XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model | XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS | Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_WX-EMS | XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | Carbide square end mill, 2-flute / 2D Flute Length (short) model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE | XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE | TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model | XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS | TSC series carbide square end mill, 2-flute / 2.5D Flute Length model | Carbide square end mill, 2-flute / 3D Flute Length (regular) model | Focus on Accuracy / Finished Surface, for Automatic Lathes 2FESW | ||||||||||||||||||||||||||
| From | 241,051 VND Special Price On Sale Till 31/03/2025 | 820,745 VND | 540,666 VND | 276,083 VND Special Price On Sale Till 31/03/2025 | 577,962 VND | 428,333 VND Special Price On Sale Till 31/03/2025 | 1,167,530 VND | 247,516 VND | 610,027 VND | 379,275 VND | 384,307 VND | 506,516 VND | 285,000 VND | 474,771 VND | 308,613 VND | 901,172 VND | 487,139 VND | 285,000 VND | 671,026 VND Special Price On Sale Till 31/03/2025 | 589,568 VND | 589,568 VND | 463,077 VND | 589,568 VND | 483,333 VND Special Price On Sale Till 31/03/2025 | 2,439,912 VND | 572,324 VND | 541,798 VND | 490,172 VND | 1,429,954 VND | 1,360,709 VND | 1,325,693 VND | 589,568 VND | 1,433,889 VND | 870,110 VND | 315,734 VND | 3,034,399 VND | 433,373 VND | 579,929 VND | 1,346,152 VND | 1,326,086 VND | |||||
| Days to ShipSố ngày giao hàng | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 12 Day(s) | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 0.1 ～ 20 | 3.15 ～ 19.99 | 1 ～ 18 | 1 ～ 20 | 1 ～ 12 | 1 ～ 30 | 3 ～ 20 | 0.1 ～ 20 | 2 ～ 2.5 | 0.1 ～ 12 | 1 ～ 20 | 2 ～ 20 | 0.2 ～ 12 | 1 ～ 20 | 0.1 ～ 20 | 1 ～ 30 | 0.5 ～ 12 | 1 ～ 20 | 0.2 ～ 16 | 0.1 ～ 30 | 3 ～ 12 | 1 ～ 20 | 1 ～ 20 | 0.2 ～ 20 | 1 ～ 20 | 0.2 ～ 12 | 8 ～ 22 | 1 ～ 25 | 1 ～ 16 | 1 ～ 12 | 1 ～ 12 | 0.2 ～ 30 | 2 ～ 25 | 0.5 ～ 12 | 0.2 ～ 12 | 3 ～ 20 | 1 ～ 20 | 3 ～ 25 | 0.5 ～ 12 | 1 ～ 12 | 0.5 ～ 6 | 0.1 ～ 6 | 3 ～ 13 | 1 ～ 6 | 3 ～ 6 |
| Blade length (ℓ)(mm) | 0.2 ～ 40 | 3.5 ～ 48 | 2.5 ～ 32 | 2 ～ 40 | 2.5 ～ 30 | 2.5 ～ 45 | 8 ～ 38 | 0.3 ～ 60 | 6 ～ 8 | 0.15 ～ 30 | 3 ～ 60 | 6 ～ 38 | 0.4 ～ 24 | 2.5 ～ 48 | 0.3 ～ 60 | 3 ～ 55 | 2 ～ 48 | 1.5 ～ 40 | 0.6 ～ 40 | 0.2 ～ 60 | 12 ～ 30 | 1.5 ～ 30 | 2.5 ～ 50 | 0.4 ～ 38 | 2 ～ 40 | 0.8 ～ 48 | 12 ～ 33 | 2.5 ～ 45 | 2.5 ～ 40 | 4 ～ 48 | 4 ～ 48 | 0.4 ～ 45 | 6 ～ 45 | 1.25 ～ 30 | 0.6 ～ 36 | 12 ～ 56 | 3 ～ 60 | 12 ～ 67 | 1.5 ～ 36 | 1.5 ～ 36 | 1.5 ～ 18 | 0.2 ～ 12 | 3 ～ 8 | 3 ～ 13 | 10 ～ 15 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | 17 ～ 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 29 ～ 76 | - | - | - | 20 ～ 55 | 23 ～ 55 | - | - | - | - | - | - | - | - | - | - |
| Shank diameter (d)(mm) | 3 ～ 20 | 6 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 12 | 4 ～ 32 | 6 ～ 20 | 3 ～ 20 | 4 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 3 ～ 12 | 6 ～ 20 | 4 ～ 20 | 4 ～ 32 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 4 ～ 32 | 6 ～ 12 | 4 ～ 20 | 4 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 25 | 6 ～ 16 | 4 ～ 12 | 4 ～ 12 | 3 ～ 32 | 4 ～ 25 | 4 ～ 12 | 3 ～ 12 | 6 ～ 20 | 4 ～ 20 | 6 ～ 25 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 13 | 4 ～ 6 | 6 |
| Number of flutes(sheet) | 2 | 2 | 4 | 4 | 4 | 4 | 3 | 2 | 4 | 2 | 4 | 4 | 2 | 2 ～ 4 | 2 | 4 | 2 | 4 | 2 | 2 | 4 | 3 | 4 | 2 | 4 | 2 | 3 | 4 | 4 | 2 | 4 | 2 | 4 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 40 ～ 110 | 40 ～ 105 | 38 ～ 100 | 40 ～ 110 | 45 ～ 80 | 40 ～ 125 | 50 ～ 105 | 40 ～ 110 | 40 | 45 ～ 80 | 45 ～ 130 | 40 ～ 105 | 35 ～ 75 | 50 ～ 100 | 45 ～ 130 | 40 ～ 130 | 45 ～ 100 | 50 ～ 125 | 40 ～ 100 | 45 ～ 140 | 50 ～ 90 | 40 ～ 100 | 40 ～ 100 | 38 ～ 100 | 40 ～ 100 | 45 ～ 100 | 110 ～ 200 | 40 ～ 120 | 50 ～ 100 | 45 ～ 100 | 45 ～ 100 | 40 ～ 125 | 40 ～ 120 | 45 ～ 85 | 40 ～ 85 | 50 ～ 125 | 40 ～ 120 | 50 ～ 140 | 40 ～ 85 | 45 ～ 90 | 45 ～ 60 | 45 ～ 50 | 35 ～ 45 | 40 ～ 50 | 50 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking |
| Coating | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | - | AlTiN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | FX | AlTiN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | For High Hardness (Silicon Group) | Non-Coated | DLC | TiAlN | Non-Coated | Non-Coated | TiCN | Dia Coat | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated |
| Blade tip shape | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge | With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge / With Lead | - | Sharp Edge / With Lead | - | Sharp Edge / With Lead | With Lead | - | Sharp Edge | Sharp Edge | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | - | - | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | C plane | Sharp Edge |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
63
-
64
-
65
-
67
-
70～70.50
- 70
- 70.50
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
115
-
120
-
130
-
150
-
180
-
200
[4-60/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Torsion Angle (θ)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
- AlTiN
- BLUE
- TiSiN
- HS
- FX
- X코팅
- TiALN
- DIA
- A+
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy