(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
479 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Achieves "quiet heavy-duty cutting" with unequal flute spacing of the bottom flute and unequal lead shape of the outer edge.・ Work Material: General steel, heat-treated steel, stainless steel, cast iron, copper, aluminum, titanium
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 12H | 13 ~ 26 | - | 6 ~ 12 | 4 | 60 ~ 80 | Quenched and tempered steel[○] | Variable lead | Plane / Side / Inclined Cuts | - | C plane | Roughing |
From: 2,901,478 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
2-flute short MG-EDS-OH1 [Alterations Available]
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Specifications]・ Shape: Square・ Work Material: General steel, heat-treated steel, cast iron, aluminum[Applications]・ Plane / Side / Groove / Pushing (Z feed) / Inclined notch
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 2.5 ~ 26 | - | 4 ~ 12 | 2 | 40 ~ 75 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Non-Coated | Sharp Edge | Square |
From: 1,232,448 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
2-Flute End Mill (E5401, E5608)
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 6.5 | 1.5 ~ 20 | - | 3 ~ 8 | 2 | 38 ~ 60 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | - | - | Square |
From: 591,243 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) |
You can add up to 6 items per a category to the compare list.
3-Flute Roughing End Mill for Aluminum Processing
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 30 | 13 ~ 45 | - | 6 ~ 25 | 3 | 57 ~ 121 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | - | - | Roughing |
From: 997,305 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
3-Flute Long Roughing End Mill for Aluminum Processing
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
10 ~ 25 | 45 ~ 90 | - | 10 ~ 25 | 3 | 95 ~ 166 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | - | - | Roughing |
From: 1,426,853 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12 | 0.5 ~ 30 | - | 4 ~ 12 | 2 | 40 ~ 80 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | BLUE | - | Square |
From: 545,347 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 8 ~ 30 | - | - | 4 | 60 ~ 80 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | BLUE | - | Square |
From: 897,914 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
2&4-Flute X-POWER S Long End Mill
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 8 ~ 60 | - | 6 ~ 20 | 2 ~ 4 | 60 ~ 150 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | X코팅 | - | Long-Neck Square |
From: 768,983 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
SPSEE3ZA
OKAZAKI SEIKO
This is a vertical feed reinforced end mill that can perform vertical feed without steps and groove processing as it is.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 4 ~ 40 | - | 4 ~ 20 | 3 | 45 ~ 105 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Side / Groove | TiAlN | - | Square |
From: 764,033 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SPSEE4GA
OKAZAKI SEIKO
An end mill that uses a unique reinforced flute type to remove powder chips effectively and enable heavy cutting and high-speed processing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 10 ~ 45 | - | 6 ~ 20 | 4 | 45 ~ 105 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Side / Groove | TiAlN | - | Square |
From: 746,448 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SPSRD3ZA
OKAZAKI SEIKO
A multi-purpose roughing end mill with the enhanced vertical feed performance of the Zakkuri Mill.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 20 | 12 ~ 40 | 15 ~ 36 | 6 ~ 20 | 3 | 50 ~ 105 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Side / Groove | TiAlN | - | Roughing |
From: 1,549,650 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
Endmill with a variable division shape which greatly reduces chattering. The OK hard coating enables machining of high-hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 10 ~ 45 | 13 ~ 55 | 6 ~ 20 | 4 | 45 ~ 105 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Side / Groove | For High Hardness (Silicon Group) | - | Square |
From: 956,811 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
2-Flute Square End Mill (TS-EDL)
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 4 ~ 40 | - | 6 ~ 12 | 2 | 60 ~ 110 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | HS | - | Square |
From: 543,276 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
4-Flute Square End Mill (TS-EML)
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 12 | 9 ~ 40 | - | 6 ~ 12 | 4 | 60 ~ 110 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | HS | - | Square |
From: 644,427 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
4 | 11 | - | 6 | 4 | 45 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | HS | - | Square |
From: 456,632 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
12 | 40 | - | 12 | 2 | 110 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | TiAlN | - | Square |
From: 1,983,853 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 10 | 13 ~ 22 | - | 6 ~ 10 | 4 | 50 ~ 70 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | - | Square |
From: 998,143 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
10 ~ 20 | 22 ~ 38 | - | 10 ~ 20 | 4 | 70 ~ 105 | Quenched and tempered steel[◎] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | FX | - | Roughing |
From: 1,700,435 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
2-Flute Long Neck End Mill (GS-LN-EDS)
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 4 | 0.15 ~ 6 | 0.3 ~ 50 | 4 ~ 6 | 2 | 45 ~ 100 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | FX | - | Long-Neck Square |
From: 569,447 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
2-Flute Long Neck End Mill (S-LN-EDS)
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 | 1.5 | 10 | 4 | 2 | 45 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | TiAlN | - | Long-Neck Square |
From: 744,962 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
2-Flute Long Square End Mill (GS-EDL)
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 25 | 4 ~ 67 | - | 6 ~ 25 | 2 | 60 ~ 160 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | FX | - | Square |
From: 543,276 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
4-Flute Long Square End Mill (GS-EML)
OSG KOREA CORP
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 | 9 | - | 6 | 4 | 60 | Quenched and tempered steel[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | FX | - | Square |
From: 644,427 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
CoroMill Plura End Mill For Roughing & Semi-Finishing R216-P (Hardness 48 HRC Max.)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
12 ~ 20 | 26 ~ 44 | 55 ~ 100 | 12 ~ 20 | 4 | 100 ~ 150 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Plane | TiCN | - | Square |
From: 7,834,404 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CoroMill Plura End Mill For Finishing R215 (Hardness 43 HRC Min. / 63 HRC Max.)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 20 | 13 ~ 38 | - | 6 ~ 20 | 6 ~ 16 | 57 ~ 104 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Groove | TiCN | - | Square |
From: 2,772,765 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CoroMill Plura End Mill For Finishing Without End Cutting Edge, Cylindrical Shank
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 8 ~ 38 | - | 6 ~ 20 | 4 ~ 8 | 57 ~ 104 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Groove | TiCN | - | Square |
From: 2,765,785 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CoroMill Plura General Purpose End Mill
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.8 ~ 1 | 0.8 ~ 1 | 2 ~ 10 | 6 | 2 | 54 ~ 57 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Groove | TiCN | - | Long-Neck Square |
From: 2,522,561 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High-Feed End Mill, Without End Cutting Edge, R215.H4 (Hardness: 43 HRC Min. / 63 HRC Max.)
SANDVIK
High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura Carbide End Mill for High Feed Face Milling
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 11 ~ 45 | - | 6 ~ 20 | 4 | 30 ~ 150 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Plane | TiCN | - | Square |
From: 2,820,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coat, Carbide long neck square end mill, 2 flutes
VAN HOORN
[Features]· Micro end mill ideal for machining deep ribs in materials up to HRC 55, available from 0.1 mm blade diameter up.· A long product life is achieved with new generation TiAlN coating and a newly designed blade tip shape.· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.8 ~ 3 | 1.2 ~ 3 | - | 6 | 2 | 64 | Quenched and tempered steel[◎] | - | - | TiAlN | - | Long-Neck Square |
From: 1,003,436 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coat, Carbide long neck square end mill, 4 flutes
VAN HOORN
[Features]· Micro end mill ideal for machining deep ribs in materials up to HRC 55.· 4-flute blade with a small blade diameter of 0.2 mm up is achieved. Compared to 2-flute type, this model has higher rigidity, longer tool service life, and achieves more efficient machining.· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 2 | 0.3 ~ 3 | - | 6 | 4 | 64 | Quenched and tempered steel[◎] | - | - | TiAlN | - | Long-Neck Square |
From: 1,003,436 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
V Series Carbide Square End Mill, 4 Flutes
PROCHI
Because it uses a carbide material, it has both high hardness and elasticity, reducing wear on the cutting edge during machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 6 | 3 ~ 12 | - | 4 ~ 6 | 4 | 50 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | - | TiAlN | - | Square |
From: 410,750 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver
GUHRING
[Features]· A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.· Furthermore, all of these processes can be done at high speed and high feed rate.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
4 ~ 20 | 11 ~ 38 | 18 ~ 52 | 6 ~ 20 | - | 57 ~ 104 | Quenched and tempered steel[○] | Variable lead | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | Micro R | Square |
From: 1,411,291 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SPEED/T 3 Flute Anti-Vibration
Poulten&Graf
[Features]· High helical type with 3-flute blade ideal for grooving.· Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.· P type T coat has a high thermal oxidation temperature and surface hardness, provides a long life, and has a wide range of compatible work materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 | 8 | - | 4 | 3 | 50 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Side / Groove / Plunging (Z feed) / Inclined Cuts | - | - | High Helical |
From: 436,683 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Poulten&Graf
[Features]· It supports steel work materials with high surface hardness such as tempered materials, thanks to its SI (silicon-based) coating with high surface hardness and high thermal oxidation temperature.· Provides long tool service life.· Focuses on usability with a long blade length of 30 mm and ø10.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 | 16 | - | 6 | 4 | 50 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Side / Groove / Plunging (Z feed) / Inclined Cuts | - | - | Square |
From: 646,645 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SPEED/T 4 Flute Anti-Vibration High Border
Poulten&Graf
[Features]· High helical type focusing on finishing with high speed processing and vibration prevention effects due to core thickness change.· P type T coat has a high thermal oxidation temperature and surface hardness, and provides a long life.· Can be used with a wide range of applicable cutting materials.· Focuses on usability with a long blade length of 30 mm and a blade diameter of ø10.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
8 ~ 16 | 20 ~ 40 | - | 8 ~ 16 | 4 | 60 ~ 100 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Side / Groove / Plunging (Z feed) / Inclined Cuts | - | - | High Helical |
From: 869,360 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SPEED/T Multi-Flute, for High Hardness
Poulten&Graf
[Features]· Can be used with hardened steel up to HRC 65 thanks to its use of highest-grade 200 Nano material as well as a high hardness, highly heat resistant oxidized silicon-based (SI) coating.· It supports high-speed machining and has a long service life.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 25 | 15 ~ 45 | - | 6 ~ 25 | 6 ~ 8 | 60 ~ 100 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Side / Groove | - | - | Square |
From: 1,555,171 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SPEED/T Multi-Flute, for High Hardness, Long Blade Length
Poulten&Graf
[Features]· Can be used with hardened steel up to HRC 65 thanks to its use of highest-grade 200 Nano material as well as a high hardness, highly heat resistant oxidized silicon-based (SI) coating.· It supports high-speed machining and has a long service life.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
8 ~ 20 | 35 ~ 75 | - | 8 ~ 20 | 6 ~ 8 | 100 ~ 150 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Groove / Plunging (Z feed) | - | - | Long-Neck Square |
From: 2,313,748 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Poulten&Graf
[Features]· Fine pitch 40° torsion angle is ideal for roughing HRC 45 or below mild steels at a low cost.· Low cutting depth and long operating life.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 20 | 13 ~ 45 | - | 6 ~ 20 | 3 ~ 4 | 50 ~ 100 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Side / Groove / Plunging (Z feed) / Inclined Cuts | - | - | Roughing |
From: 1,135,641 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GCT+ 4 Flutes Anti-Vibration Core Power
GCT
[Features]· Vibration prevention effects due to core thickness change and SI silicon-based coating for high hardness enable use with a wide range of workpiece materials from steel and stainless steel to Inconel.· A universal type with a large round width that provides high rigidity, with good machinability/durability making it ideal for grooving through side machining.· Focus on finishing with small gash.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 8 ~ 45 | - | 6 ~ 20 | 4 | 50 ~ 100 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Side / Groove / Plunging (Z feed) / Inclined Cuts | - | - | Square |
From: 690,616 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GCT+ 4 Flutes Anti-Vibration Division
GCT
[Features]· Anti-vibration effects are obtained from the variable split, and the high lubrication ACR coating supports stainless steel, titanium alloy, aluminum alloy and copper alloy.· A small gash verging on a pin angle and high 42° helix enables large cutting depth in soft materials.· Universal type with 50% core thickness, ideal for applications from grooving to side/Z processing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1.5 ~ 5 | 4 ~ 15 | - | 4 ~ 6 | 4 | 50 ~ 60 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Side / Groove / Plunging (Z feed) / Inclined Cuts | - | - | Square |
From: 717,708 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
WIDIN
[Features]· Supports processing with flexible material and aluminum alloy by the sharpness of the pin square blade shape that emphasizes sharpness and the TiAiN coating with high lubricity.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
13 | 26 | - | 12 | 4 | 80 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Side / Groove / Plunging (Z feed) | TiAlN | Sharp Edge | Square |
From: 2,050,796 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
4-Blade Pin Square Sander, EM Long
WIDIN
[Features]· Long four-blade pin square sander EM.· Supports flexible material and aluminum alloy.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 16 | 25 ~ 80 | - | 6 ~ 16 | - | 100 ~ 200 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Side / Groove / Plunging (Z feed) | TiAlN | Sharp Edge | High Helical |
From: 1,137,635 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide 4-Flute Variable Split Variable Lead High-Hardness End Mill 38°/41° F636TX
7 LEADERS
[Features]· High performance 4-flute end mill for machining high hardness materials with UMG carbide substrate.· Variable split and unequal lead reduce chatter, enabling high-efficiency cutting.· Nanoparticle multilayer coating.· Suitable for machining high-hardness materials from HRC 40 to 70 due to high sheath harness and high initial oxidation temperature.· Suitable for a wide range of work materials from general steel to high hardness steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 8 ~ 38 | - | 6 ~ 20 | 4 | 57 ~ 104 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts / Countersinking | - | With Lead | Square |
From: 952,712 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
End Mill with 2 Carbide Flutes 35° E122X
7 LEADERS
[Features]· 2-flute general-purpose end mill.· A 0.1 increment outer diameter series.· Supports a wide range of machining.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 20 | 0.5 ~ 38 | - | 4 ~ 20 | 2 | 50 ~ 100 | Quenched and tempered steel[○] | Standard torsion (30-40°) | Plane / Side / Groove / Countersinking | - | With Lead | Square |
From: 447,930 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide 4-Flute High-Hardness End Mill 55° E168TX
7 LEADERS
[Features]· High performance 4-flute 55° high torsion end mill for machining high hardness materials with UMG carbide substrate.· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).· Nanoparticle multilayer coating.· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.· Suitable for a wide range of work materials from general steel to high hardness steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 8 ~ 38 | - | 6 ~ 20 | 4 | 50 ~ 100 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Countersinking | - | With Lead | High Helical |
From: 1,013,499 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX
7 LEADERS
[Features]· High performance 4/6-flute 45° torsion end mill for machining high hardness materials with UMG carbide substrate.· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).· Nanoparticle Multilayer Coating· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.· Suitable for a wide range of work materials from general steel to high hardness steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 8 ~ 38 | - | 6 ~ 20 | 4 ~ 6 | 50 ~ 100 | Quenched and tempered steel[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Countersinking | - | With Lead | High Helical |
From: 899,385 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
CADCAD |
From |
Days to ShipSố ngày giao hàng |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | OSG | YG 1 | YG 1 | YG 1 | YG 1 | YG 1 | YG 1 | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | VAN HOORN | VAN HOORN | PROCHI | GUHRING | Poulten&Graf | Poulten&Graf | Poulten&Graf | Poulten&Graf | Poulten&Graf | Poulten&Graf | GCT | GCT | WIDIN | WIDIN | 7 LEADERS | 7 LEADERS | 7 LEADERS | 7 LEADERS |
Product SeriesDòng sản phẩm | Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF | CoroMill Plura End Mill For Roughing & Semi-Finishing R216-P (Hardness 48 HRC Max.) | CoroMill Plura End Mill For Finishing R215 (Hardness 43 HRC Min. / 63 HRC Max.) | CoroMill Plura End Mill For Finishing Without End Cutting Edge, Cylindrical Shank | High-Feed End Mill, Without End Cutting Edge, R215.H4 (Hardness: 43 HRC Min. / 63 HRC Max.) | High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver | Carbide 4-Flute Variable Split Variable Lead High-Hardness End Mill 38°/41° F636TX | ||||||||||||||||||||||||||||||||||||||
CADCAD | |||||||||||||||||||||||||||||||||||||||||||||
From | 2,901,478 VND | 1,232,448 VND | 591,243 VND | 997,305 VND | 1,426,853 VND | 545,347 VND | 897,914 VND | 768,983 VND | 764,033 VND | 746,448 VND | 1,549,650 VND | 956,811 VND | 543,276 VND | 644,427 VND | 456,632 VND | 1,983,853 VND | 998,143 VND | 1,700,435 VND | 569,447 VND | 744,962 VND | 543,276 VND | 644,427 VND | 7,834,404 VND | 2,772,765 VND | 2,765,785 VND | 2,522,561 VND | 2,820,290 VND | 1,003,436 VND | 1,003,436 VND | 410,750 VND | 1,411,291 VND | 436,683 VND | 646,645 VND | 869,360 VND | 1,555,171 VND | 2,313,748 VND | 1,135,641 VND | 690,616 VND | 717,708 VND | 2,050,796 VND | 1,137,635 VND | 952,712 VND | 447,930 VND | 1,013,499 VND | 899,385 VND |
Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) | 7 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | Quote | 4 Day(s) or more | 4 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
Blade diameter (D)(φ) | 6 ~ 12H | 1 ~ 12 | 0.5 ~ 6.5 | 6 ~ 30 | 10 ~ 25 | 0.5 ~ 12 | 3 ~ 12 | 1 ~ 20 | 2 ~ 20 | 3 ~ 20 | 5 ~ 20 | 3 ~ 20 | 1 ~ 12 | 2 ~ 12 | 4 | 12 | 6 ~ 10 | 10 ~ 20 | 0.1 ~ 4 | 1 | 1 ~ 25 | 2 | 12 ~ 20 | 5 ~ 20 | 3 ~ 20 | 0.8 ~ 1 | 6 ~ 20 | 0.8 ~ 3 | 0.2 ~ 2 | 1 ~ 6 | 4 ~ 20 | 3 | 6 | 8 ~ 16 | 6 ~ 25 | 8 ~ 20 | 5 ~ 20 | 3 ~ 20 | 1.5 ~ 5 | 13 | 5 ~ 16 | 3 ~ 20 | 0.2 ~ 20 | 3 ~ 20 | 3 ~ 20 |
Blade length (ℓ)(mm) | 13 ~ 26 | 2.5 ~ 26 | 1.5 ~ 20 | 13 ~ 45 | 45 ~ 90 | 0.5 ~ 30 | 8 ~ 30 | 8 ~ 60 | 4 ~ 40 | 10 ~ 45 | 12 ~ 40 | 10 ~ 45 | 4 ~ 40 | 9 ~ 40 | 11 | 40 | 13 ~ 22 | 22 ~ 38 | 0.15 ~ 6 | 1.5 | 4 ~ 67 | 9 | 26 ~ 44 | 13 ~ 38 | 8 ~ 38 | 0.8 ~ 1 | 11 ~ 45 | 1.2 ~ 3 | 0.3 ~ 3 | 3 ~ 12 | 11 ~ 38 | 8 | 16 | 20 ~ 40 | 15 ~ 45 | 35 ~ 75 | 13 ~ 45 | 8 ~ 45 | 4 ~ 15 | 26 | 25 ~ 80 | 8 ~ 38 | 0.5 ~ 38 | 8 ~ 38 | 8 ~ 38 |
Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | 15 ~ 36 | 13 ~ 55 | - | - | - | - | - | - | 0.3 ~ 50 | 10 | - | - | 55 ~ 100 | - | - | 2 ~ 10 | - | - | - | - | 18 ~ 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Shank diameter (d)(mm) | 6 ~ 12 | 4 ~ 12 | 3 ~ 8 | 6 ~ 25 | 10 ~ 25 | 4 ~ 12 | - | 6 ~ 20 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 12 | 6 ~ 12 | 6 | 12 | 6 ~ 10 | 10 ~ 20 | 4 ~ 6 | 4 | 6 ~ 25 | 6 | 12 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 | 6 ~ 20 | 6 | 6 | 4 ~ 6 | 6 ~ 20 | 4 | 6 | 8 ~ 16 | 6 ~ 25 | 8 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 6 | 12 | 6 ~ 16 | 6 ~ 20 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 |
Number of flutes(sheet) | 4 | 2 | 2 | 3 | 3 | 2 | 4 | 2 ~ 4 | 3 | 4 | 3 | 4 | 2 | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 6 ~ 16 | 4 ~ 8 | 2 | 4 | 2 | 4 | 4 | - | 3 | 4 | 4 | 6 ~ 8 | 6 ~ 8 | 3 ~ 4 | 4 | 4 | 4 | - | 4 | 2 | 4 | 4 ~ 6 |
Overall Length (L)(mm) | 60 ~ 80 | 40 ~ 75 | 38 ~ 60 | 57 ~ 121 | 95 ~ 166 | 40 ~ 80 | 60 ~ 80 | 60 ~ 150 | 45 ~ 105 | 45 ~ 105 | 50 ~ 105 | 45 ~ 105 | 60 ~ 110 | 60 ~ 110 | 45 | 110 | 50 ~ 70 | 70 ~ 105 | 45 ~ 100 | 45 | 60 ~ 160 | 60 | 100 ~ 150 | 57 ~ 104 | 57 ~ 104 | 54 ~ 57 | 30 ~ 150 | 64 | 64 | 50 | 57 ~ 104 | 50 | 50 | 60 ~ 100 | 60 ~ 100 | 100 ~ 150 | 50 ~ 100 | 50 ~ 100 | 50 ~ 60 | 80 | 100 ~ 200 | 57 ~ 104 | 50 ~ 100 | 50 ~ 100 | 50 ~ 100 |
work material | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] |
Torsion Angle (θ) | Variable lead | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | - | - | Powerful Torsion (45°-60°) | Variable lead | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove | Side / Groove | Side / Groove | Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane | Groove | Groove | Groove | Plane | - | - | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove | Groove / Plunging (Z feed) | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) | Side / Groove / Plunging (Z feed) | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking |
Coating | - | Non-Coated | - | - | - | BLUE | BLUE | X코팅 | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | HS | HS | HS | TiAlN | TiAlN | FX | FX | TiAlN | FX | FX | TiCN | TiCN | TiCN | TiCN | TiCN | TiAlN | TiAlN | TiAlN | - | - | - | - | - | - | - | - | - | TiAlN | TiAlN | - | - | - | - |
Blade tip shape | C plane | Sharp Edge | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Micro R | - | - | - | - | - | - | - | - | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead |
Type | Roughing | Square | Square | Roughing | Roughing | Square | Square | Long-Neck Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Roughing | Long-Neck Square | Long-Neck Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Long-Neck Square | Long-Neck Square | Square | Square | High Helical | Square | High Helical | Square | Long-Neck Square | Roughing | Square | Square | Square | High Helical | Square | Square | High Helical | High Helical |
Loading...Tải…
[4-75/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy