Square Connectors（Page2）

3M^TM Miniature Delta Ribbon (MDR) System Plug

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.· Efficient wiring connection by bulk pressure wiring.· Assorted wiring harness tools are available.· Compatible with assorted shell kits.

Miniature Delta Button (MDR) System Wire Mount Receptacle

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.▪ EMI/ESD countermeasure items.· Wired to 1.27-mm pitch flat cable by bulk pressure welding connection. Supports daisy chain connections by intermediate pressure welding connection.· Tough structure based on a die-cast lock stand.• M2.5 is also available for fixed screw sizes corresponding to ISO standards.

SMAW250-NN【100 Pieces Per Package】

YEONHO ELECTRONICS

Interface Connector / D-Sub D-Sub Connector【1-2 Pieces Per Package】

HARTING

HARTING, rectangular connector, interface connector; D-Sub D-Sub connection

Misumi, Waterproof, Single-Lever Pedestal (for Relay Fixing)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof single-lever base for relay fixing. This is a waterproof panel base that can plug connectors of each series according to the number of contacts. Fully compatible with products from major connector manufacturers. The entire hood is made of die-cast aluminum, giving it excellent strength.

• Volume Discount

• IP65
• For Power Supply
• Connection between Boards
• Lever Lock

CAD ：

2D

Solder/Machine Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

EMI Countermeasures D-Sub Connector with Resin Hood

MISUMI

Select screw model or plated / non-plated to suit the application

• Volume Discount

• EMI Countermeasure

CAD ：

2D

EMI Countermeasure D-Sub Connector with Resin Hood (Low-profile/Angled)

MISUMI

Thin model with selectable cable drawing out direction and angle

• Volume Discount

• Space-saving

CAD ：

2D

FCN Extension Connector

MISUMI

Manufactured by Fujitsu Components. FCN hood for relay only.

• Volume Discount

• Screw Lock

CAD ：

2D

Centronics Press-fit Spring-lock Connector (Female)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

• Volume Discount

• For Signal
• Connection in Boards
• Printer
• Pressure Welding
• Gold Plated

CAD ：

2D

Han Waterproof Connector Dual-Lever Hood (Straight)

MISUMI

2 Lever-model Straight Hood

• Volume Discount

• CE-Compliant
• Lever Lock

MR Series

HONDA TSUSHIN KOGYO

Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.[Features]· Dual screw and a spring lock mechanism that can withstand any shock.· Dust-proof mechanism with excellent environmental resistance.· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.· A relay type case is also provided

D-Sub Connector Assembly Hood with Side-Projecting Cable, XM2S

OMRON

[Features]· Projected cable type added to the popular D-sub connector assembly hood.· This opens up space that can be utilized in the back of the connector.· Cable is pulled out horizontally.· Effective noise suppression is achieved by a metalized plastic hood.

[Enclosure]C Type IP66, Rotary Lever Series

ILME

Ilme's traditional lever C typeIt is a standard enclosure of Ilme connector.A uniquely developed rotary lever enables smooth attachment and detachment.Stainless steel levers and springs ensure safe and secure fitting and airtightness.The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

MIL connector IDC female connector (no lock)

MISUMI

[Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

• Volume Discount

• UL
• MIL
• For Signal
• Connection between Boards
• Solenoid Valve
• PLC
• Pressure Welding
• Gold Plated

MIL Connector PCB Straight Male Connector (BOX Model)

MISUMI

[Features]OMRON BOX type MIL straight male connector for circuit board mounting. It can be used for circuit boards of various factory automation equipment. Compared to circuit board mounting male connectors with levers, this connector is much smaller as it has no lever, making it very convenient for circuit board wiring in small devices. The widely used 2.54 mm pitch arrangement makes it compatible with commercially available universal circuit boards, etc.

• Volume Discount

• UL
• MIL
• Solder

CAD ：

2D

MR Straight Hooded Connector

MISUMI

Standard Straight MR Hood

CAD ：

2D

HA Series Slim Connector

WEIDMULLER

A slim type internal connector with which the wiring method can be selected (250 V, 22 A / 16 A, number of poles: 10 / 16 / 32 / 48 (+ PE))

2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC Series

HIROSE ELECTRIC

A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.[Features]・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.・Low profile: pin heads are at a low height of 9.2 mm.・The space between circuit boards when stacking is 12.2 mm.

4-mm Pitch Card Edge Connector 1150N Series

KEL

Card edge connector for industrial equipment, using tongue-type contacts to achieve stable contact.

Half-Pitch 1.27-mm Interface Connector, DF02 Series

JAPANAVIATION

[Features]・ The DF02 series is an interface connector standardized for the industrial equipment market and is half pitch (1.27) compatible.・This product uses a lightweight resin material for the hood, and gives full consideration to EMI by using a nickel-plated shield.・Further, the single-action lock format is used to provide excellent operability.

Low Cost Female MIL Connector Pressure Welding Contact Connector (without Lock)

MISUMI

MIL Connector, Female Pressure Welding Model (without Lock)

• Volume Discount

• MIL
• For Signal
• Pressure Welding

EMI Countermeasure D-Sub Connector with Metal Hood

MISUMI

[Features]This is a metal hood manufactured by J.S.T. MFG. CO., LTD. (JST). A hood for D-sub connectors, widely used in general. Easy to assemble and robust. The surface of the mild steel hood is nickel plating to maximize the EMI effect when connecting to a shielded cable. The box-like shape completely covers the connection, etc., between the connector and the cable, achieving a high level of shielding effect against noise intrusion. Cable is clamped to a high standard of holding power as the cover nuts that clamp the hood also clamp the cable together.

• Volume Discount

• Space-saving
• EMI Countermeasure

CAD ：

2D

Han Waterproof Connector Single-Lever Hood (Straight)

MISUMI

Manufactured by HARTING. 1 lever type straight hood. [About CE mark engraving]Although our products have been compliant with the CE Low Voltage Directive for some time, starting from March 2020, the CE mark will be engraved in visible locations on the hood housing. There are no changes related to quality or performance. Since the changeover will take several years, there is a possibility that there will be a mix of old and new items. Please note.

• Volume Discount

• CE-Compliant
• Lever Lock

1.25-mm Pitch Miniature Crimp Connector (UL Standard Certified Product), DF13 Series【1-10,000 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.[Features]· Small.· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)· Multipole· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.· Supports automatic mounting.· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.· Complete basic functionality despite compact form factor.· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

D-sub Connector Plug Case (Plastic Type), CTF Series

HIROSE ELECTRIC

These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.[Features]· Because the lock mechanism is a screw type mechanism, it is rugged and reliable.• Made of strong ABS resin, so they are lightweight and sturdy.• The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.• Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.• 25-contact models are plug cases for modems as defined in JIS-C-6361.• Easily incorporated using solder (HD type) or crimping (CD type).

CRC (Compact Robot Connector) (51238)

MOLEX

A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Optimal for industrial robots and FA applications (compatible housings: 51234/55836)

Discrete Wire Press Connector - XG5 (Discrete Wire Press Connector)【1-100 Pieces Per Package】

OMRON

[Features]・ A solution to the troublesome nature of discrete wire connections has been found.・A press-fit socket connector for mating with MIL type plugs.・Uses a 2-slot press-fit structure and insulation barrel to enable reliable and high current (3A) discrete wire press-fit connections.・The use of a wide range of covers to fit the application allows you to keep saving space on wiring configurations and discrete wires.・Using the unique, easy locking lever, enables you to lock with an original (XG8B, XG8WL terminals) or box plug (XG4C).▪ UL standard (File No.E103202) certified products are used as standard (except for XG5S type).

Discrete Wire Crimp Socket- XG5 (Discrete Wire Crimp Socket)

OMRON

[Features]・A discrete wire crimped type has been added to the MIL connector series.・ The XG5N-U socket with lock, which is unique to Omron, can be inserted and removed with one hand and securely locked.・ Saves up to 24% (approximately) space (compared to XG4A).

0930 Series Han Waterproof, Single-Lever Pedestal Connector (for Panel Mount)

MISUMI

Single-lever panel mounting pedestal for waterproof panel that can incorporate all connector series, depending on the number of cores. Aluminum die-cast products are added in one section of the lid

• Volume Discount

• CE-Compliant
• Connection between Boards
• Lever Lock

CAD ：

2D

DSUB Connector High Density Solder Type (Universal Type)

MISUMI

Han Module Waterproof Connector【1-2 Pieces Per Package】

MISUMI

Lightweight plastic connector with excellent environmental resistance

• Volume Discount

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

• Volume Discount

• For Signal
• PLC
• EMI Countermeasure
• RS422
• RS232
• Screw Type
• Gold Plated
• Screw Lock

CAD ：

2D

EMI Countermeasure D-Sub Connector with Aluminum Die-cast Hood

MISUMI

Sturdy and Lightweight D-sub Hood Made of Aluminum

• Volume Discount

• EMI Countermeasure

CAD ：

2D

EMI Countermeasure D-sub Connector with Resin Hood (Both Solder/Pressure Welding)

MISUMI

[Features]Hood manufactured by Hirose Electric. The surface of the hood is nickel plating, making it an excellent EMI (electromagnetic interference) countermeasure. A hood that can be attached when connecting a fused cable (round cable with a ribbon cable tip) to an IDC type D-sub connector. Solder-type D-sub connectors (including high-density types) can also be plugged.

• Volume Discount

• EMI Countermeasure

CAD ：

2D

MIL Socket Pressure Welding Contact Female Connector (with Lock)

MISUMI

[Features]This is a space saving OMRON IDC connector. A new type of MIL socket connector with a locking lever built into the main body of female connector. Compared to conventional MIL socket connectors, it is easy to operate because it can be inserted and removed with one hand, making it suitable for use in locations where insertion and removal are frequent.

• Volume Discount

• UL
• MIL
• For Signal
• Space-saving
• Pressure Welding
• Lever Lock

Centronics Solder Spring-lock Connector (Female)

MISUMI

[Features]A Centronics connector for relay with a lineup of low-priced products. This connector is used for wire-to-wire connection with a male connector by attaching cable with solder.

• Volume Discount

• For Signal
• Connection between Boards
• Printer
• Solder

CAD ：

2D

PCR Half Pitch Solder Female Connector

MISUMI

Half-pitch Model PCR Solder Model Connector

• For Signal
• PLC
• EMI Countermeasure
• Solder
• Gold Plated

CAD ：

2D

Han Waterproof A-Model Connector (Screw Connection)

MISUMI

A Model Connector

• Volume Discount

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Screw Type
• Insertion
• Silver-Plated

CAD ：

2D

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.[Features]·Robust and ideal for interfaces due to the metal shell and metal case.·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.·For FCC and other EMI countermeasures.·Live line connection (3 steps) is also available.·Ideal for horizontal, parallel and vertical connections.·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.[Applications]·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

MR Series Case

HONDA TSUSHIN KOGYO

Case for the MR series.[Features]· Dual screw and a spring lock mechanism that can withstand any shock.· Dust-proof mechanism with excellent environmental resistance.· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.· A relay type case is also provided

3.5‑mm Pitch 2-Row Connector For Small Internal Power Supplies, MDF6 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.[Features]· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

D-Sub Connector Plug Case (Product With EMI Measures), CTH Series

HIROSE ELECTRIC

These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.[Features]· Because the lock mechanism is a screw type mechanism it is rugged and reliable.· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.• Use screws to ground the drain wire of the cable with a clamp.• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).• For FD*D, however, wire a fused I/O cable when using the case.• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.

Half-Pitch Multi-Function 2-Piece Connector, FX2 Series

HIROSE ELECTRIC

Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.[Features]・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.