Square Connectors（Connection direction：Straight Page3）

Cover Case for HIF3B Series

HIROSE ELECTRIC

This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.

Rectangular Multi-Pin Rack / Panel Crimp Connector, QR/P Series

HIROSE ELECTRIC

Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.[Features]· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.• In addition, the insulation is a flame retardant material (UL9V-0).• Guide pins are made of metal for the durability to withstand coupling shocks.• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

IL-AG9 Series

JAPANAVIATION

[Features]It is a versatile and easy-to-use small cable relay connector for various in-vehicle devices

MX10 Series

JAPANAVIATION

Our MX9 series of connectors boasts an impressive track record of use with air bags, and has been miniaturized for improved space saving.

3M^TM 2.0-mm Pitch I/O Connector, Wire-Mount Receptacle

3M

A rectangular connector with a unique contact shape that takes into consideration soldering workability.[Features]・ 2.0-mm pitch 6-pole connector for connecting cables in industrial equipment・ Both large diameter cable connection and space saving are achieved・ EMI/ESD countermeasure product・ Compatible with various servo encoder connections・ Compatible with a wide range of cable sizes from #16 to #28 AWG・ Achieves improved work efficiency and quality stability by product design that takes cable connection work into consideration

Mini Delta Ribbon (MDR) System Wiremount Solder Plug

3M

[Features]· The MDR system consists of “industry standard product” half pitch I/O connectors.· Use of pre-loaded cantilever contacts ensures high reliability, requires little insertion and withdrawal strength and prevents twisting.· Accommodates a wide range of cable sizes from AWG#24 to AWG#30.· Solder wiring method that does not require special jigs or tools.· Solder heat resistance of 360°C for 10 seconds comparable to conventional connectors.· Unique contact shape that takes soldering workability into consideration.[Applications]· For cable connections between equipment.· Accommodates a wide range of cable sizes and ideal for solder wiring without special jigs or tools.

3M^TM Miniature Delta Ribbon (MDR) System Plug

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.· Efficient wiring connection by bulk pressure wiring.· Assorted wiring harness tools are available.· Compatible with assorted shell kits.

3M^TM Miniature Delta Ribbon (MDR) System Surface Mount Receptacle

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· A single row surface mounting solder tail is used to easily achieve circuit board wiring with good transfer properties.· The contact lengths of the upper and lower columns are equal, and the skew of the contact portion is essentially zero.· Crosstalk prevention and impedance matching taken into account.

17JE Series Straight DIP Type

DDK

Straight DIP type connector which can be mounted vertically on a PCB.

CAD ：

2D

57E Series Noise Suppression Soldering Plug Connector

DDK

[Features]· 57E series connectors correspond to plugs of the 57 series 57-30 type (straight plug with cable hood) with noise suppression used to avoid the effects of interference.

CAD ：

2D

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

CRC (Compact Robot Connector) (51238)

MOLEX

A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Optimal for industrial robots and FA applications (compatible housings: 51234/55836)

CRC™ (Compact Robot Connector) (55836)

MOLEX

Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 54333/54334)

MIXO Modular Insert & Contact

ILME

[Features]· MIXO.· MIXO modular inserts and contacts.· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.· Supports optical fiber, coaxial, and Dsub9Pin connectors.

RS Pro D-sub connector (solder terminal) female

RS Pro

RS Pro brand. High-quality solder D-sub connector.

Back Shell for D-sub Connector

RS Pro

RS Pro brand. High-quality D-sub connector shell.

Han Waterproof, Q-Model Connector (Weld-Wire Connection)

MISUMI

Waterproof Q-type connector manufactured by HARTING. Available for numerous applications, high contact density, fast and reliable processing, and available for various termination methods.

• Volume Discount

• UL
• CSA
• VDE
• For Power Supply
• For Signal
• Waterproof
• Crimp Terminal
• Lever Lock
• Silver-Plated

Centronics EMI Countermeasures Pressure Welding Type Connector (Male)

MISUMI

Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof DD-type connector. It is a highly reliable crimp connection that can shorten the work time. A high-density connector that can be embedded in the Han-E series hoods and bases. Please check the male or female before ordering.

• Volume Discount

• UL
• IP65
• For Power Supply
• For Signal
• Connection between Boards
• Connection in Boards
• Screw Type
• Insertion
• 2DCAD
• Silver-Plated

CAD ：

2D

Solder Spring-lock Centronics Connector (PCB Angle Male)

MISUMI

General-Purpose, Angle, Centronics Connector for PCB Mounting

• Volume Discount

• For Signal
• Connection between Boards
• Space-saving
• Printer

MR Vertical/Horizontal Dual Hooded Connector

MISUMI

For Vertical and Horizontal Dual-use MR Hood

CAD ：

2D

PCR Half Pitch Solder Female Connector

MISUMI

Half-pitch Model PCR Solder Model Connector

• For Signal
• PLC
• EMI Countermeasure
• Solder
• Gold Plated

CAD ：

2D

PCR Half Pitch Connector with Hood

MISUMI

Half-pitch PCR Compatible Hood

CAD ：

2D

PCR Half Pitch Male Press-fit/Panel Mountable Connector

MISUMI

Half-pitch PCR Panel Mounted Connector

• Pressure Welding
• Gold Plated

CAD ：

2D

HE Series, Universal Connector

WEIDMULLER

A 6-pole connector with multiple connection methods (500 V, 24 A, number of poles: 6 (+ PE), screw / spring / crimp / push-in)

HDC-CR (Frame)

WEIDMULLER

Frame for mounting CONCepT modules of standard, female and connector type 180°.

HKP Series

HONDA TSUSHIN KOGYO

2.54 mm pitch, straight, right angle through hole type connector.[Features]· Based on our original design, the contacts have provide highly reliable contact.· A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.· Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.· A UL-certified product is used as an insulator.· Reworking wiring mistakes is also simplified using the removal tool.▪ Mating with FFC, MFC, HSC, DIC series is supported

PCS Series

HONDA TSUSHIN KOGYO

Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors[Features]· Board to cable types available in 20 to 96 cores.• Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.· Soldered types also available.▪ For EMI measures other than FCC.• Built with a durable structure for use as an interface.· Quick lock using a metal lock spring.· Those for panel relays are also available.· Accessories for preventing incorrect insertion are also available.· A wide range of core numbers, from 34 to 150, are also available for board to board.• Specifically designed for smooth insertion and extraction, even when using multiple cores.• Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

MRP Series Housings

HONDA TSUSHIN KOGYO

Housing for the MRP series.[Features]· Dual screw and a spring lock mechanism that can withstand any shock.· Dust-proof mechanism with excellent environmental resistance.· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.· A relay type case is also provided

PCS Series Cases

HONDA TSUSHIN KOGYO

Rectangular connector case for 1.27 mm pitch high density interface.[Features]·Vertical case for standard cable of PCS series·Robust with metal shell + metal case, ideal for interfaces·For FCC and other EMI countermeasures[Applications]·Various compact equipment such as office equipment, communication, measurement, factory automation.

1.25‑mm Pitch Low-Profile Type Crimp Connector, DF14 Series【100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.[Features]· Thin type.· A dedicated right-angle connector to achieve a low-profile on top of circuit boards.· Circuit board mounting height: 2.5 mm.· This makes it possible to draw signals from places where there is no space between the circuit boards.· In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.· Supports automatic mounting.· The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.· Additionally, magazine packing is also available for the on-board type.· Four-walled type prevents socket from scraping the circuit board.· Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.· Additionally, a reinforcement bracket is included to prevent solder from peeling.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

• Volume Discount

1.78‑mm Pitch Rectangular Interface Connector QM Series

HIROSE ELECTRIC

Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.[Features]· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

1 mm Pitch, Circuit Board-to-Cable / FPC / Micro Coaxial Connector, DF19 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.In-stock custom products cannot be returned or canceled. Thank you.

Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

2 mm Pitch, Direct-To-Circuit Board Connector, DF4 Series

HIROSE ELECTRIC

Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.[Features]・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.・Small type/multi-pin: a wide range of small types with a number of pins.・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

3.3 mm Pitch, Compact Circuit Board-To-Cable Connector For Internal Power Supply, DF33 Series

HIROSE ELECTRIC

It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

5 mm Pitch, Connector With Potting Capability For Compact Secondary Power Supply, DF5 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.[Features]· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm. · Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry. · Full lock mechanism: Equipped with an outer-lock type full-lock mechanism. · 8 A current rating: Can carry a maximum current of 8 Amperes.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

D Terminal Connector DX*LM Series

HIROSE ELECTRIC

The D terminal connector is for digital broadcast devices.[Features]・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.

DeviceNet Compliant Connector, HR31 Series

HIROSE ELECTRIC

These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.[Features]· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.· Snap-lock: The snap-lock feature creates a tactile click when mating.· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.· Designed to allow for removal by ⌀1 mm pin when improperly wired.· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.[Features]・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

Half Pitch Interface Connector, DXM Series, Rectangular

HIROSE ELECTRIC

This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

Rectangular Miniature Multi-Pin Rack / Panel Crimp Connector, QR/P1 Series

HIROSE ELECTRIC

Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.[Features]· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.· The terminals are made compact by segregating according to those for power and those for signals.· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.· Guide pins are metallic to withstand coupling impact.· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force. In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Rack and Panel Connector, QR/P4 Series

HIROSE ELECTRIC

Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.[Features]· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.· The terminals are made compact by segregating according to those for power and those for signals.• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.• In addition, the insulation is a flame retardant material (UL9V-0).• The small design features guide pins and insulation joined in a single body shape.• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.• This product has obtained UL, CSA, and TUV certifications.

Rack and Panel Connector, QR/P6 Series

HIROSE ELECTRIC

It is popular as a square multi-pin rack / panel connector with plug-in connection.Compact design with separate crimp terminals for power supply and signal, and guide pin with integrated insulator.[Features]・ The terminal, combined with the smooth insertion/removal feeling, provides stable contact pressure due to the point blade contact, and has a wide margin for the variation in connector coupling length that is peculiar to plug-in connection・ The terminal is made compact by dividing it for power supply and signal・ The signal terminal pitch inside the housing is 2.54 mm, and the opposing 2 poles on one side are arranged at a pitch of 6.9 mm to withstand high voltage, so it can be used for power supply・ Insulation material uses flame retardant (UL9V-0)・ Miniaturized by integrating the guide pin with the insulator・ Floating structure is possible by using stepped screws・ The female housing has a structure in which the contact part of the female terminal is deeper than the mating surface and it is compatible with the finger test (UL standard 1950 compliant)・ This product is UL, CSA, TÜV certified

Rack And Panel Connector, QR/P8 Series

HIROSE ELECTRIC

• Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.[Features]• Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.• By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.• In addition, terminals for signals are positioned with a 2-mm pitch.• The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.• Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.· The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.• The small design features guide pins and insulation joined in a single body shape.• Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.• This product has obtained UL, CSA, and TUV certifications.