Square Connectors（Connection direction：Straight Page2）

Han Waterproof EE Connector (Weld-Wire Connection)

MISUMI

EE Connector

• Volume Discount

• UL
• CSA
• VDE
• For Power Supply
• For Signal
• Waterproof
• Crimp Terminal
• Lever Lock
• Silver-Plated

CAD ：

2D

Press-fit MIL Female Connector for Discrete Wires

MISUMI

Forms a pressure connection with bulk wires. Can be crimped easily with the dedicated tool

• Volume Discount

• UL
• CSA
• For Signal
• Pressure Welding
• Gold Plated

CAD ：

2D

HA Series Slim Connector

WEIDMULLER

A slim type internal connector with which the wiring method can be selected (250 V, 22 A / 16 A, number of poles: 10 / 16 / 32 / 48 (+ PE))

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.[Features]·Robust and ideal for interfaces due to the metal shell and metal case.·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.·For FCC and other EMI countermeasures.·Live line connection (3 steps) is also available.·Ideal for horizontal, parallel and vertical connections.·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.[Applications]·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

1.27‑mm Pitch Two-Piece Connectors, HIF6 Series

HIROSE ELECTRIC

Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.[Features]・Product variation: connection methods include board-to-board model and cable pressure connection.・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

HIROSE ELECTRIC

A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.[Features]• Metal shell makes it compact and sturdy.• Connectors can be mounted on the chassis, or on the front or back sides of the panel.• Height of the wiring side is greatly reduced to facilitate more compact sets.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

Half Pitch Interface Connector, DX Series

HIROSE ELECTRIC

I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.

MX23A Series, Contact

JAPANAVIATION

[Features]· A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

3M^TM Miniature Delta Ribbon (MDR) System Receptacles

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.▪ EMI/ESD countermeasure items.· Tough structure based on a die-cast lock stand.• M2.5 is also available for fixed screw sizes corresponding to ISO standards.· Products equipped with a ground lock are available to streamline the pre-soldering of temporary mountings and ground processing.

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

CDA/CDC Common Use Screw Type and Crimp Type 16A / 250V Insert

ILME

CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert[Features]・CDA/CDC.・General-use screw type, crimp type.▪ 16A / 250V insert

[Enclosure]C Type IP66, Rotary Lever Series

ILME

Ilme's traditional lever C typeIt is a standard enclosure of Ilme connector.A uniquely developed rotary lever enables smooth attachment and detachment.Stainless steel levers and springs ensure safe and secure fitting and airtightness.The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert

ILME

New generation lever IL-BRID Series.[Features]・ The newly-developed IL-BRID lever is made of stainless steel and has smooth resin. The manufacturer has adopted the latest design in which these 2 contradictory features are perfectly coordinated.・ When you operate the lever, the resin part first engages the peg to reduce friction and then slides and is fixed.・ After that, the stainless steel part is fixed to the peg to ensure a high load capacity.・ Low friction makes it suitable for frequent insertion and removal applications.

MIL Connector PCB Straight Male Connector (BOX Model)

MISUMI

[Features]OMRON BOX type MIL straight male connector for circuit board mounting. It can be used for circuit boards of various factory automation equipment. Compared to circuit board mounting male connectors with levers, this connector is much smaller as it has no lever, making it very convenient for circuit board wiring in small devices. The widely used 2.54 mm pitch arrangement makes it compatible with commercially available universal circuit boards, etc.

• Volume Discount

• UL
• MIL
• Solder

CAD ：

2D

Centronics EMI Countermeasure Spring-lock Press-fit Connector (Female)

MISUMI

57F Series Noise Countermeasure Product Centronics Female Connector

• Volume Discount

• Pressure Welding
• Gold Plated

CAD ：

2D

PCR Half Pitch Female Press-fit Connector

MISUMI

Half-pitch model PCR Pressure Welding Model Connector

• Pressure Welding
• Gold Plated

CAD ：

2D

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.[Features]・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.・Thin type: mount height when used at a right angle: 4.8 mm.・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.・Further, there are settings available to provide a light feel even if tin plating is used.

D-Sub Connector (Ribbon Cable Insulation Displacement Connection Type) FD Series

HIROSE ELECTRIC

A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.[Features]· Has a metal shell and so is small and lightweight.· Connector mounting can be performed on the chassis, front or back, or one of the sides.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.· A connection press can also be used.

CRC (Compact Robot Connector) (51238)

MOLEX

A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Optimal for industrial robots and FA applications (compatible housings: 51234/55836)

Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. It is a highly reliable crimp connection that can shorten the work time. Fully compatible with products from major connector manufacturers. Please check the male or female before ordering.

• Volume Discount

• UL
• IP65
• For Power Supply
• For Signal
• Connection between Boards
• Connection in Boards
• Screw Type
• Insertion
• 2DCAD
• Silver-Plated

CAD ：

2D

Low Cost Female MIL Connector Pressure Welding Contact Connector (without Lock)

MISUMI

MIL Connector, Female Pressure Welding Model (without Lock)

• Volume Discount

• MIL
• For Signal
• Pressure Welding

Solder and Machine Contact D-Sub Connector (High Current)

MISUMI

Made by ERNI in Germany. High-current capacity model supporting up to 20 A

• Volume Discount

• For Power Supply
• Connection between Boards
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

MIL Socket Pressure Welding Contact Female Connector (with Lock)

MISUMI

[Features]This is a space saving OMRON IDC connector. A new type of MIL socket connector with a locking lever built into the main body of female connector. Compared to conventional MIL socket connectors, it is easy to operate because it can be inserted and removed with one hand, making it suitable for use in locations where insertion and removal are frequent.

• Volume Discount

• UL
• MIL
• For Signal
• Space-saving
• Pressure Welding
• Lever Lock

IEEE1284 Half Pitch Press-fit/Panel Mountable Female Connector

MISUMI

[Features]A panel-mount half-pitch I/O connector manufactured by Sumitomo 3M. It is mounted on a panel and used to connect with a male connector.

• Volume Discount

• For Signal
• EMI Countermeasure
• Pressure Welding
• Gold Plated
• One-Touch Lock

CAD ：

2D

PCR Half Pitch Solder Female Connector

MISUMI

Half-pitch Model PCR Solder Model Connector

• For Signal
• PLC
• EMI Countermeasure
• Solder
• Gold Plated

CAD ：

2D

Han Waterproof D-Model Connector (Crimped Connection)

MISUMI

D Model Connector

• Volume Discount

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Caulking
• Insertion
• Silver-Plated

CAD ：

2D

FCN connector Solder type female connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

• Volume Discount

• Solder
• Gold Plated
• Screw Lock

MR Series Case

HONDA TSUSHIN KOGYO

Case for the MR series.[Features]· Dual screw and a spring lock mechanism that can withstand any shock.· Dust-proof mechanism with excellent environmental resistance.· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.· A relay type case is also provided

HIF3F Series 2.54‑mm Pitch Box Type Pin Header

HIROSE ELECTRIC

This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.[Features]▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.▪ Compatibility: pin header compatible with HIF3B series.

2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC Series

HIROSE ELECTRIC

A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.[Features]・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.・Low profile: pin heads are at a low height of 9.2 mm.・The space between circuit boards when stacking is 12.2 mm.

Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

D-sub Connector Plug Case (Plastic Type), CTF Series

HIROSE ELECTRIC

These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.[Features]· Because the lock mechanism is a screw type mechanism, it is rugged and reliable.• Made of strong ABS resin, so they are lightweight and sturdy.• The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.• Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.• 25-contact models are plug cases for modems as defined in JIS-C-6361.• Easily incorporated using solder (HD type) or crimping (CD type).

1‑mm Pitch Board-To-Cable Connector For LVDS Signals, FX15 Series

HIROSE ELECTRIC

A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

Small, Rectangular Interface Connector, 3200 Series

HIROSE ELECTRIC

This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.[Features]• A receptacle connector board implementation surface with a height of the 2.9 mm.• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.• This receptacle connector can also be prepared in an embossed packaging product format.• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.• A latch lock is applied to both sides for mating processes.• This lock is implemented with the minimum space possible, and helps downsize your product set.• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.• The number of pins available is either 8 or 10.

QE Series

JAPANAVIATION

Using a metallic outer shell, this square connector is fitted using a lever.[Features]· Hard-type with metallic shell. Structure that is resistant to vibrational impact due to a lever lock (original type).・A mismatch prevention key is included in the shell to prevent mistaken and reverse mating. By using the location setting post and key sold separately, 16 mismatch prevention patterns can be created.・Also compatible with WV0/WL1 and other specialized railroad cables.・3 cable-side plugs are provided to match the wires being used or the work being performed.Original type: with lever lock mechanismQE-A type: by enlarging the lever portion, this type is reinforced with a lever to prevent warping and other changes that occur during use.QE4 Type: by scaling up the shell wire pullout opening and cable clamp diameter, cables with large outer coverings can now be accommodated with ease.・Other than the original type, there is an enlarged mating shell and an enhanced shell to prevent prying and reverse mating on the panel side receptacle, as well as a noise reducing ferrite attached to the insulator. There are 3 types that include ferrite.・The panel side receptacle is compatible with both electric wire crimp connection contact and circuit board through hole connection contact (pin contact) types.・The shell type can be disassembled and rearranged for simple modification during circuit changes and incorrect wiring.

3M^TM Mini-Camera Link Standard-Compliant PCB Mount Connector Receptacle

3M

[Features]· A board mounting connector receptacle—compatible with the Mini-Camera Link standard.

Miniature Delta Button (MDR) System Wire Mount Receptacle

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.▪ EMI/ESD countermeasure items.· Wired to 1.27-mm pitch flat cable by bulk pressure welding connection. Supports daisy chain connections by intermediate pressure welding connection.· Tough structure based on a die-cast lock stand.• M2.5 is also available for fixed screw sizes corresponding to ISO standards.

3M^TM Miniature Delta Ribbon (MDR) System Surface Mount Receptacle

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· A single row surface mounting solder tail is used to easily achieve circuit board wiring with good transfer properties.· The contact lengths of the upper and lower columns are equal, and the skew of the contact portion is essentially zero.· Crosstalk prevention and impedance matching taken into account.

CD Common Use Crimp Type 10A / 50 to 250 V Insert

ILME

CD, general purpose crimped type, 10A / 50 - 250 V, Insert[Features]・CD general purpose crimped type.・10A/50 - 250V.▪ Insert

D-Sub Connectors XM3-L/XM2-L/XM4K/XM4L

OMRON

[Features]・ This D-sub connector series has been renewed with lead-free compatible products.・ The fastening screw diameter can be identified from its external appearance.・ A solution to problems associated with combining fasteners has been found.・ Shielded connectors for EMI countermeasures.▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).

Han Waterproof, Q-Model Connector (Weld-Wire Connection)

MISUMI

Waterproof Q-type connector manufactured by HARTING. Available for numerous applications, high contact density, fast and reliable processing, and available for various termination methods.

• Volume Discount

• UL
• CSA
• VDE
• For Power Supply
• For Signal
• Waterproof
• Crimp Terminal
• Lever Lock
• Silver-Plated

Solder/Machine Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Pressure-welded/Press Contact D-Sub Connector

MISUMI

Pressure Welding model allows wires to be connected easily and strain-relieving mounting demonstrates strong tensile force

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Pressure Welding
• Gold Plated

CAD ：

2D

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

• Volume Discount

• For Signal
• PLC
• EMI Countermeasure
• RS422
• RS232
• Screw Type
• Gold Plated
• Screw Lock

CAD ：

2D

MIL connector IDC female connector (no lock)

MISUMI

[Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

• Volume Discount

• UL
• MIL
• For Signal
• Connection between Boards
• Solenoid Valve
• PLC
• Pressure Welding
• Gold Plated