Square Connectors（Applicable pin/contact：Female (socket) Page3）

17JE Series Straight DIP Type

DDK

Straight DIP type connector which can be mounted vertically on a PCB.

CAD ：

2D

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

MIXO Modular Insert & Contact

ILME

[Features]· MIXO.· MIXO modular inserts and contacts.· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.· Supports optical fiber, coaxial, and Dsub9Pin connectors.

Slim D-Sub Connector - XM3-LS

OMRON

Slim D sub connector - XM3-LS.

RS Pro D-sub connector (solder terminal) female

RS Pro

RS Pro brand. High-quality solder D-sub connector.

Han, Industrial Connector, Insert, Accessory, E/ES/EEE Series

HARTING

Han, Industrial Connector, Insert, Accessory, E/ES/EEE Series

Han Waterproof, Q-Model Connector (Weld-Wire Connection)

MISUMI

Waterproof Q-type connector manufactured by HARTING. Available for numerous applications, high contact density, fast and reliable processing, and available for various termination methods.

• Volume Discount

• UL
• CSA
• VDE
• For Power Supply
• For Signal
• Waterproof
• Crimp Terminal
• Lever Lock
• Silver-Plated

Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof DD-type connector. It is a highly reliable crimp connection that can shorten the work time. A high-density connector that can be embedded in the Han-E series hoods and bases. Please check the male or female before ordering.

• Volume Discount

• UL
• IP65
• For Power Supply
• For Signal
• Connection between Boards
• Connection in Boards
• Screw Type
• Insertion
• 2DCAD
• Silver-Plated

CAD ：

2D

PCR Half Pitch Solder Female Connector

MISUMI

Half-pitch Model PCR Solder Model Connector

• For Signal
• PLC
• EMI Countermeasure
• Solder
• Gold Plated

CAD ：

2D

HDC-CR (Frame)

WEIDMULLER

Frame for mounting CONCepT modules of standard, female and connector type 180°.

HKP Series

HONDA TSUSHIN KOGYO

2.54 mm pitch, straight, right angle through hole type connector.[Features]· Based on our original design, the contacts have provide highly reliable contact.· A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.· Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.· A UL-certified product is used as an insulator.· Reworking wiring mistakes is also simplified using the removal tool.▪ Mating with FFC, MFC, HSC, DIC series is supported

PCS Series

HONDA TSUSHIN KOGYO

Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors[Features]· Board to cable types available in 20 to 96 cores.• Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.· Soldered types also available.▪ For EMI measures other than FCC.• Built with a durable structure for use as an interface.· Quick lock using a metal lock spring.· Those for panel relays are also available.· Accessories for preventing incorrect insertion are also available.· A wide range of core numbers, from 34 to 150, are also available for board to board.• Specifically designed for smooth insertion and extraction, even when using multiple cores.• Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

MRP Series Housings

HONDA TSUSHIN KOGYO

Housing for the MRP series.[Features]· Dual screw and a spring lock mechanism that can withstand any shock.· Dust-proof mechanism with excellent environmental resistance.· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.· A relay type case is also provided

1.25‑mm Pitch Low-Profile Type Crimp Connector, DF14 Series【100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.[Features]· Thin type.· A dedicated right-angle connector to achieve a low-profile on top of circuit boards.· Circuit board mounting height: 2.5 mm.· This makes it possible to draw signals from places where there is no space between the circuit boards.· In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.· Supports automatic mounting.· The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.· Additionally, magazine packing is also available for the on-board type.· Four-walled type prevents socket from scraping the circuit board.· Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.· Additionally, a reinforcement bracket is included to prevent solder from peeling.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

• Volume Discount

1.78‑mm Pitch Rectangular Interface Connector QM Series

HIROSE ELECTRIC

Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.[Features]· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

1 mm Pitch, Circuit Board-to-Cable / FPC / Micro Coaxial Connector, DF19 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.In-stock custom products cannot be returned or canceled. Thank you.

Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【100 Pieces Per Package】

HIROSE ELECTRIC

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

3.3 mm Pitch, Compact Circuit Board-To-Cable Connector For Internal Power Supply, DF33 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

5 mm Pitch, Connector With Potting Capability For Compact Secondary Power Supply, DF5 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.[Features]· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm. · Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry. · Full lock mechanism: Equipped with an outer-lock type full-lock mechanism. · 8 A current rating: Can carry a maximum current of 8 Amperes.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

D Terminal Connector DX*LM Series

HIROSE ELECTRIC

The D terminal connector is for digital broadcast devices.[Features]・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.

DeviceNet Compliant Connector, HR31 Series

HIROSE ELECTRIC

These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.[Features]· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.· Snap-lock: The snap-lock feature creates a tactile click when mating.· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.· Designed to allow for removal by ⌀1 mm pin when improperly wired.· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.[Features]・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

Half Pitch Interface Connector, DXM Series, Rectangular

HIROSE ELECTRIC

This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

Rectangular Miniature Multi-Pin Rack / Panel Crimp Connector, QR/P1 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.[Features]· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.· The terminals are made compact by segregating according to those for power and those for signals.· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.· Guide pins are metallic to withstand coupling impact.· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force. In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Rack and Panel Connector, QR/P6 Series

HIROSE ELECTRIC

It is popular as a square multi-pin rack / panel connector with plug-in connection.Compact design with separate crimp terminals for power supply and signal, and guide pin with integrated insulator.[Features]・ The terminal, combined with the smooth insertion/removal feeling, provides stable contact pressure due to the point blade contact, and has a wide margin for the variation in connector coupling length that is peculiar to plug-in connection・ The terminal is made compact by dividing it for power supply and signal・ The signal terminal pitch inside the housing is 2.54 mm, and the opposing 2 poles on one side are arranged at a pitch of 6.9 mm to withstand high voltage, so it can be used for power supply・ Insulation material uses flame retardant (UL9V-0)・ Miniaturized by integrating the guide pin with the insulator・ Floating structure is possible by using stepped screws・ The female housing has a structure in which the contact part of the female terminal is deeper than the mating surface and it is compatible with the finger test (UL standard 1950 compliant)・ This product is UL, CSA, TÜV certified

Rack And Panel Connector, QR/P8 Series

HIROSE ELECTRIC

• Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.[Features]• Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.• By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.• In addition, terminals for signals are positioned with a 2-mm pitch.• The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.• Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.· The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.• The small design features guide pins and insulation joined in a single body shape.• Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.• This product has obtained UL, CSA, and TUV certifications.

Long-Life, Small, Rectangular Interface Connector, 3500 Series

HIROSE ELECTRIC

This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.[Features]• This connector has a long service life and can be inserted and removed up to 20,000 times.• The terminal structure has high reliability, and is a 2-point contact bellows type.• In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.• By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.• Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.• The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.• Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.• The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.• Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.• Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.

Small Rack and Panel Connector, QR/P15 Series

HIROSE ELECTRIC

Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.[Features]・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.・Power supply compatibility: The 24-pin type incorporates power source terminal type.・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.・Further, it is also possible to crimp using automated machines.・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

MX19 Series

JAPANAVIATION

[Features]· A connector for small waterproof wire relays applicable to JISD0203S.

MX31 Series

JAPANAVIATION

The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.[Features][High-density implementation achieved with a large number of pins]· These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.[Mechanical lock structure ensures secure fitting]· The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.[Double locking structure reliably prevents loss of contact]· Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.· The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.[Low insertion force structure with easy insertion and extraction]· A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.[Tin and gold plating are available for the contact finish]· The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.[Misconfiguration-prevention ...

MX34 Series

JAPANAVIATION

These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.[Features]・A small-type/high density connector with abundant variations.A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.・Single-row / two-row types are available supporting 3–40 pins.・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.・Reliable mating due to mechanical locking structure.・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.・Double-layered stop construction to prevent contact removal.・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.・The socket lock is protected by a unique housing structure.・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.・High-reliability socket contact・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stabl...

MX36 Series

JAPANAVIATION

This is a small waterproof relay connector that was developed for automotive airbags.[Features]・Small waterproof wire-to-wire (relay) connector· Contact tab size 025・For wire-to-wire (relay) connections ・Small, waterproof crimping type▪ For different types of air bags.

MX44 Series

JAPANAVIATION

[Features]· A small, waterproof connector for board-to-wire connections to support the increasing demand for compact automotive connectors.

QX Series

JAPANAVIATION

[Features]· A small, lightweight, highly reliable, square shape multipole connector.

3M^TM 2.0-mm Pitch I/O Connector, Wire-Mount Receptacle

3M

A rectangular connector with a unique contact shape that takes into consideration soldering workability.[Features]・ 2.0-mm pitch 6-pole connector for connecting cables in industrial equipment・ Both large diameter cable connection and space saving are achieved・ EMI/ESD countermeasure product・ Compatible with various servo encoder connections・ Compatible with a wide range of cable sizes from #16 to #28 AWG・ Achieves improved work efficiency and quality stability by product design that takes cable connection work into consideration

SCR Connector Wire Mount Receptacle

3M

[Features]· Bellows-type contact with superior prying and vibration resistance.· Provides support for large-diameter cables in a small package with a 2-mm contact pitch and special solder tail arrangement.· 0.75-mm2 wires can be connected to all contacts.· Unique contact shape designed for soldering workability.

3M^TM Delta Connector for 1.27-mm Pitch Flat Cable

3M

[Features]· Compatible with 1.27-mm pitch flat cables and round cables with processed flat tips.· Also supports connection by bulk pressure welding and daisy chains.· Low-profile design.

3M^TM Miniature Delta Ribbon (MDR) System V2 Type Surface Mounting Receptacle

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· A single-row surface mounting solder tail is utilized to easily achieve circuit board wiring with good transmission characteristics.· The contact lengths of the upper and lower columns are equal, and the skew of the contact portion is essentially zero.· Provides crosstalk prevention and impedance matching.· Adsorption surface and weight balance readily supports automated mounting.

3M^TM Miniature Delta Ribbon (MDR) System Receptacle (Condominium)

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.· The unique condominium (two-stage) structure saves space. This receptacle is optimally suited to daisy chain connections, including high-density SCSI mountings.· Supports panel mountings.

UB Connector

JST(JSTMFG)

A connector that is compatible with USB (Universal Serial Bus)— serial interface standard for connecting PCs and peripheral equipment.

57FE Series Pressure Welded Type Flat Cable

DDK

[Features]• The 57FE series is a flat cable pressure-welded connector that has fittings covered by a metal shell, which is a countermeasure for electromagnetic radiation that helps reduce noise.• Basic varieties include 10, 20, 30, and 40 types.

CAD ：

2D

57GE Series Straight DIP Ribbon Receptacle.

DDK

[Features]・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.・Type 40 (receptacle for I/F).

CAD ：

2D

57RE Series - Ribbon-Type, Lightweight, Right-Angle Receptacle Connectors

DDK

These connectors have fewer parts than 57LE series connectors and are lighter as well. (The shell and end disk latch are a single unit, as are the insert and locater.)[Features]• The 57RE series connectors have fewer parts than the 57LE series connectors, and are lighter as well. • Connectors on the other side fit plug connectors belonging to the 57, 57F, 57FE, and 57JE series.• UL application filed (File No. E72124).

Miniature Low-Profile Interface DN Connector

HIROSE ELECTRIC

This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular[Features]· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.· The single-action lock mechanism provides excellent operability.· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.· The dip connector includes a snap (circuit board temporary joint) bracket.· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.· Depending on the application, cable can be extracted in either the vertical or horizontal direction.

CRC™ (Compact Robot Connector) (54332)

MOLEX

Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 51233)