HIF3B Series MIL Standard-Compliant Ribbon Cable Connector

HIROSE ELECTRIC

MIL standard-compliant rectangular ribbon cable connector.[Features]· HIF3B series products are developed to comply with the MIL standard and can be used in a wide range of applications.· Compatible with HIF3 series.· HIF3B series products are UL-listed connectors.· Features a mechanism to prevent mis-insertion.· A form in which inserting the guide key (polarity key) on the pin header side creates a convex section that fits into the concave section (polarity keyway) of the socket. (MIL standard)· A form in which the mis-insertion prevention guide (polarity guide) on the socket side fits into the slot (polarity slot) on the pin header side.· A system that embeds the polarizing key in the socket hole and guides it.· A guide system in which the convex section on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.· The compatible wire (UL2651) is an AWG#28 ribbon cable (7-core/0.127 mm, jacket diameter of 0.9 ± 0.2 mm).[Applications]· A wide variety of models are available, enabling use with a wide range of equipment.

Solder/Press Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

• Volume Discount

CAD ：

2D

Centronics Solder Spring-lock Connector (Male)

MISUMI

[Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

• Volume Discount

CAD ：

2D

IEEE1284, Half-Pitch Connector, EMI-Countermeasure Solder Male Connector

MISUMI

High-speed Transfer Supporting Solder Model Half-pitch I/O Connector

• Volume Discount

CAD ：

2D

57 Series Soldering/DIP-Type Connector

DDK

A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.[Features]■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.· 57-10 type (unit connection plug).· 57-20 type (unit connection receptacle).· 57-30 type (plug with straight hood for cables).· 57-40 type (panel receptacle with locking spring).· 57-60 type (cable relay receptacle).

17JE Series Soldering Type Connector

DDK

17 Series (Dsub type) soldering connection type square connector for cable equipment. [Features]· Square connector for solder wire connections, with solder cup type contact.· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.· The hood is metalized plastic, which provides weight reduction and a high shielding effect.· Either the pin connector or the socket connector can be selected.· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure. [Applications]· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

CAD ：

2D

Han Waterproof E-Model Connector (Screw Connection)

MISUMI

E Model Connector

• Volume Discount

CAD ：

2D

Han E / EE Series Connector (Screw Type / Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).

3M^TM Miniature Delta Ribbon (MDR) System Plug

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.· Efficient wiring connection by bulk pressure wiring.· Assorted wiring harness tools are available.· Compatible with assorted shell kits.

D-Sub Connectors - XM2/XM3

OMRON

These D-sub connectors are ideal for use with OA equipment interfaces. [Features]· Shielded connector for use in EMI countermeasures.· The metalized plastic hood (Model XM2S) provides excellent noise protection.· Multi-hole ferrite core equipped types (Model XM3B-F) are also available.· Offers a space-saving design and superior noise protection at high frequencies.· A wide variety of mounting brackets and grounding fixtures are available.· Conforms to UL standards (File No. E103202) as standard (excluding the Model XM2S and some other products.) [Applications]· Small and tough-wearing structure with a metal shell

2.00-mm Pitch Serial I/O Connector

MOLEX

A Molex 2.0 mm pitch connector for external relay connection.

EMI Countermeasure Solder/Press Contact D-sub Connector

MISUMI

Entire shell has been nickel-plated as an EMI countermeasure, and dimple processed to ensure a firm contact with the partner

• Volume Discount

CAD ：

2D

DF11 Series 2‑mm Grid Double-Row Connector (UL/CSA Standard Certified Product)【1-500 Pieces Per Package】

HIROSE ELECTRIC

[Features]· The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.· Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.· Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.· Choose from gold or tin plating to match application. SMT-compatible products are also available.· Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.· Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).[Applications]· For all types of OA equipment, including copy machines and printers.

• Volume Discount

D-Sub, D02, D02-M15 Series

JAPANAVIATION

A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.[Features]・The D-sub connector is becoming the standard with its combination of pin and socket connector types.・Interchangeable with different connector types and commonly used accessories.・The shell joint shape has polarity, fully preventing accidental reverse insertion.・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.[Features]·Robust and ideal for interfaces due to the metal shell and metal case.·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.·For FCC and other EMI countermeasures.·Live line connection (3 steps) is also available.·Ideal for horizontal, parallel and vertical connections.·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.[Applications]·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】

HIROSE ELECTRIC

A rectangular multi-contact connector manufactured using a unique HIROSE design.[Features]· Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.· Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.· The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.· These connectors are specified in the NTT specifications, “Spec. No. 1931.”

Solder/Press-fit (High-density) D-Sub Connector

MISUMI

High-density D-sub Connector. Allows for high-density wiring without increasing wiring space

• Volume Discount

CAD ：

2D

SMW250-NN【100 Pieces Per Package】

YEONHO ELECTRONICS

Solder and Press Contact PLC D-Sub Connector

MISUMI

Used with Mitsubishi Electric Q series which is highly trusted in Japan

• Volume Discount

CAD ：

2D

MR Male Connector

MISUMI

High-density MR Male Connector

• Volume Discount

CAD ：

2D

Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-10,000 Pieces Per Package】

HIROSE ELECTRIC

[Features]· A new type of connector in which IDC terminals are inserted into the case.· By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.· Terminals can be replaced after connection, providing excellent maintainability.· IDC part is protected by the case to provide a high level of reliability.· No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.· High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.· Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.[Applications]· Convenient for various types of wiring.· For all types of OA equipment, including copy machines and printers.

D-Sub Connector (Solder Termination Type), HD Series

HIROSE ELECTRIC

A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.[Features]· Small and lightweight connector due to metal shell.· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

Solder/Machine Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

• Volume Discount

CAD ：

2D

D-sub Connector, Crimped Housing

MISUMI

Crimp connection model that makes consistent workmanship quality possible

CAD ：

2D

MIL Connector PCB Straight Male Connector (Lever Model)

MISUMI

[Features]Hirose Electric's lever-type, circuit board mount, MIL straight male connector. A wire-to-wire connector for OMRON KEYENCE PLC. It is a highly versatile circuit board connector that can be mounted on commercially available universal circuit boards, etc., as the circuit board mounting hole pitch is 2.54 mm. The pin direction is vertical to the circuit board surface. Since it has a lock mechanism at the time of connection, the connector can be securely connected and fixed.

• Volume Discount

CAD ：

2D

Centronics Press-fit Spring-lock Connector (Male)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

• Volume Discount

CAD ：

2D

EMI Countermeasure Solder/Machine Contact D-Sub Connector

MISUMI

Has a machine contact for plug-in and removal durability, and bead processing ensures a firm contact with the partner

• Volume Discount

CAD ：

2D

MIL Press-fit Male Extension Connector

MISUMI

[Features]This is a male connector for IDC relay, manufactured by Hirose Electric. This is an IDC type connector that allows for batch IDC together with 1.27 mm pitch ribbon cable and wire-to-wire connection with MIL standard connectors (HIF3 B connectors). Since it has a locking mechanism after joining, it will not come off even if some pulling force is applied.

• Volume Discount

CAD ：

2D

DSUB Connector High Density Solder Type (Universal Type)

MISUMI

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

SMW200-NN【100 Pieces Per Package】

YEONHO ELECTRONICS

Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

MR Series

HONDA TSUSHIN KOGYO

Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.[Features]· Dual screw and a spring lock mechanism that can withstand any shock.· Dust-proof mechanism with excellent environmental resistance.· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.· A relay type case is also provided

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.[Features]・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.・Thin type: mount height when used at a right angle: 4.8 mm.・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.・Further, there are settings available to provide a light feel even if tin plating is used.

D-Sub Connector (Straight Board-Mounted Type), SD Series

HIROSE ELECTRIC

A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.[Features]· Has a metal shell and so has a small and lightweight connector.· The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.· Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.· With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.· The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.

Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. Due to cable connection by screws, it can be easily connected with just a slotted screwdriver without the need for dedicated tools. The screw connection is equipped with a contact. Please confirm the type and male or female before ordering.

• Volume Discount

CAD ：

2D

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

• Volume Discount

CAD ：

2D

Interface Connector / D-Sub D-Sub Connector

HARTING

HARTING, rectangular connector, interface connector; D-Sub D-Sub connection

Centronics EMI Countermeasures Pressure Welding Type Connector (Male)

MISUMI

Solder and Press-fit (PCB Mountable) D-Sub Connector

MISUMI

D-sub Connector for PCB Mounting Horizontal mounting model makes it ideal for taking wiring out from the circuit

• Volume Discount

CAD ：

2D

Solder and Machine Contact D-Sub Connector (High Current)

MISUMI

Made by ERNI in Germany. High-current capacity model supporting up to 20 A

• Volume Discount

CAD ：

2D

MIL Connector PCB Straight Male Connector (BOX Model)

MISUMI

[Features]OMRON BOX type MIL straight male connector for circuit board mounting. It can be used for circuit boards of various factory automation equipment. Compared to circuit board mounting male connectors with levers, this connector is much smaller as it has no lever, making it very convenient for circuit board wiring in small devices. The widely used 2.54 mm pitch arrangement makes it compatible with commercially available universal circuit boards, etc.

• Volume Discount

CAD ：

2D

Han Waterproof A-Model Connector (Screw Connection)

MISUMI

A Model Connector

• Volume Discount

CAD ：

2D

Han Waterproof DD-Model Connector (Crimped Connection)

MISUMI

Waterproof DD type connector manufactured by HARTING. This is a high-density connector that can be incorporated into the hood or pedestal of the Han-E series.

• Volume Discount

CAD ：

2D

2 mm Pitch, Direct-To-Circuit Board Connector, DF4 Series

HIROSE ELECTRIC

Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.[Features]・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.・Small type/multi-pin: a wide range of small types with a number of pins.・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.