Interface Terminal Blocks (Round/Y Terminal Types)（Supported equipment manufacturer：Omron）

• You can add up to 6 items per a category to the compare list. Compare

  

  MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminal

  MISUMI

  A 34-position MIL connector terminal block equipped with a KV-Nano series name plate that reduces work labor-hours thanks to its spring-loaded structure, allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20 ～ 50	DIN rail/Direct attachment	Omron	7	PLC / Servo Motor	76 ～ 181	M3	-	42	51

  From: 497,118 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.[Features]· An ultra small size with a pitch between terminals of just 7 mm.· Ideal for size reducing PLC or SBC interfaces.· A compact type for helping reduce the size of control panels.· The connector and terminal block are easy-to-handle 1:1 wire connection types.· Uses SS terminal screws for easy wiring.· Structured to prevent screws from dropping out and becoming lost.· The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.· Compatible with both DNI rail mounting and direct mounting methods.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	20 ～ 40	DIN rail/Direct attachment	Omron	7	PLC	80 ～ 149	M3	UL / CUL / TUV	40	36 ～ 36.8

  From: 699,138 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: Spade

  MISUMI

  This is a terminal block equipped with a MIL socket connector, allowing lower stage wiring without upper stage terminal wiring getting in the way. You can choose a machine name plate. Every 6th bulkhead shape and a triangle mark support number recognition.

  • Volume Discount

  • c-UL
  • Space-saving
  • Sensor
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20 ～ 40	DIN rail/Direct attachment	Omron	7	PLC	80 ～ 150	M3	CUL	41.5	42.5

  From: 578,932 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]·The width of the main body is 40 mm compared to the width of the DIN rail of 35 mm.· Boasts an even slimmer finish.· The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.· The terminal number and connector number are wired 1-to-1.· Circuits can be freely designed.·Workability is further improved by adopting a new screw method.·If you use a fork type terminal, the PCN series is definitely advantageous.· A lever type which enables neat and tidy removal from rails.· No tools required for removal, and so no need for wasted space on the backside of the main body.· Compatible with both rail mounting and direct mounting.·Equipped with support screw (dedicated Y-shaped crimp terminal).·The terminal screw has a fall-prevention structure and the washer is floating, which saves labor-hours for connection work.·It can be easily attachment/removal from the IEC 35 mm rail by the lever method, and no tools are required.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	20 ～ 40	DIN rail/Direct attachment	Omron	7.62	Other	86 ～ 162	M3	UL / CUL / TUV	40	36 ～ 36.8

  From: 817,369 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)

  OMRON

  Connector terminal block conversion units designed specifically to connect PLCs.[Features]・ The wiring pattern specialized for PLC connection has reduced the trouble of checking the signal layout・ The name paper of the terminal block will be the PLC address・ Connection method is cross-head screw type, straight-slot screw type, push-in type・ Available with and without power supply terminal・ The operability of the push-in terminal has been improved, making it even easier to use・ Connection work has become smoother with a terminal arrangement that takes workability into consideration・ It can be mounted with DIN rail and screws・ With a common design, it can be customized・ The ribs for screw mounting are designed to dive into the DIN rail so that they do not interfere with DIN rail mounting parts or end plates・ Of course, even if XW2Rs are connected to each other, they will be placed without any interference[Applications]・ Convert various input devices such as sensors into connectors and use them for PLC input

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	34	Other	Omron	5 ～ 7	-	98.5 ～ 130.7	Other	-	43.3 ～ 48.35	50

  From: 1,173,103 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block for Control Panels, PM-32 Series

  WAGO

  [Features]● Proven results. A best selling connector terminal block.● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.● For using fewer parts. No stopper required for aluminum DIN rails

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	32	With DIN rail	Omron	3.5	PLC	42	-	-	48.5	85

  From: 1,277,890 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct Mount

  MISUMI

  A terminal block equipped with an FCN 40-core connector that reduces work labor-hours thanks to its spring-loaded structure, allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Omron	7	PLC	146	M3	-	42	51

  From: 642,895 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series

  PATLITE (KASUGA)

  Use a screwdriver to insert crimp terminals (round/Y types) or to remove wiring and wires. Release the wires by pressing the release button (labor-saving design). A compact type terminal with a pitch of just 5 mm (space saving design).[Features]· A clutch lock (screw-less) type with 1-to-1 wiring (screw-less type). Dedicated connection for crimp terminals.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20 ～ 40	DIN rail/Direct attachment	Omron	5	Other	64 ～ 105	-	CE / UL	59	42

  From: 996,165 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PLC Connector Terminal Block (for OMRON PLC, Input), Mounting Method: DIN Rail / Direct Mount

  MISUMI

  This is a PLC connector terminal block for input compatible with OMRON PLC circuits, greatly reducing wiring labor-hours and allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Omron	7	PLC	129	M3	-	42	42.4

  From: 830,976 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block, PCI Series, Crimp Terminal Type

  TOYOGIKEN

  [Features]· The PCI series is compatible with the main Mitsubishi and OMRON sequencers (forDC5V to 24V).· A slim design with a main body width of just 40 mm. For use with 35 mm wide DIN rails.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20	With DIN rail	Omron	7.62	PLC	162	M3	UL / CUL / TUV	40	36.8

  From: 1,173,956 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  PLC Connector Terminal Block (for OMRON PLC, Output), Mounting Method: DIN Rail / Direct Mount

  MISUMI

  This is a PLC connector terminal block for output compatible with OMRON PLC circuits, greatly reducing wiring labor-hours and allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	40	DIN rail/Direct attachment	Omron	7	PLC	129	M3	-	42	42.4

  From: 789,170 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PLC Connector Terminal Block (for OMRON PLC, Input)

  MISUMI

  A spring-loaded terminal block that can be directly connected to the circuit of an OMRON PLC. It is a PLC connector terminal block for input allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	40	DIN rail/Direct attachment	Omron	7	PLC	125	M3	-	42	51

  From: 756,520 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWI series (7mm pitch between terminals), terminal block screw type: Self-up

  MISUMI

  MDR connector-equipped terminal block with 7 mm pitch between terminals

  • Volume Discount

  • AC Servo
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MDR connector	50	DIN rail/Direct attachment	Omron	7	Servo Motor	185	M3	-	49	45

  From: 1,601,925 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch

  PATLITE (KASUGA)

  A 7-mm pitch interface terminal block that uses a full-cover structure that does not expose the circuit board, and is designed with safety in mind.[Features]・ The cover is openable and can be fixed at any position・ Compared to the conventional TIFA7 Series, it is a series that reduces the installation space by approx. 12% pursuing further space saving・ Standard-product connector is Hirose Electric MIL connector (Ribbon cable connector)・ OMRON MIL connector and Fujitsu F360 series connector (input/output connector for circuit board) can also be mounted[Applications]・ Ideal for PLC (programmable controller) and computer interface

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	40	DIN rail/Direct attachment	Omron	7	Other	150	M3	CE / UL / CUL / CSA	40	42.3

  From: 1,009,901 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)

  YOSHIDADENKI

  A space saving 7.62 mm pitch FCN connector type terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Omron	7.62	PLC	101.21	M3	UL / CSA	64	48

  From: 1,356,685 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PLC Connector Terminal Block (for OMRON PLC, Output)

  MISUMI

  A spring-loaded terminal block that can be directly connected to the circuit of an OMRON PLC. It is a PLC connector terminal block for output allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	40	DIN rail/Direct attachment	Omron	7	PLC	125	M3	-	42	51

  From: 529,915 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  +comPLC connector terminal block (for Omron input, for output) MIL

  MISUMI

  [New Product] OMRON PLC terminal block that combines common 8 pole terminal block and 32 point terminal block

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	40	DIN rail/Direct attachment	Omron	7	PLC	125	M3	-	42	51

  From: 695,747 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWI Series (Ultra Small)

  MISUMI

  [Specifications]·A 45 mm × 55 mm space saving connector terminal block

  • Volume Discount

  • c-UL
  • For Signal
  • Space-saving
  • Sensor
  • PLC

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	20	With DIN rail	Omron	7.62	PLC	55	M3	CUL	47	50

  From: 925,755 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interface Terminal Block , Standard Type, 8.5mm Pitch

  PATLITE (KASUGA)

  It is possible to wire 2 mm2 cable which is 1 size larger in consideration of voltage drop, etc.[Features]・ Standard one-to-one connection interface terminal block・ The terminal pitch 8.5-mm type, which emphasizes workability, allows sufficient clearance between the upper and lower terminal screws, allowing the lower terminal screws to be retightened even after wiring・ It is possible to change the bottom wiring without removing the top wiring[Applications]・ Ideal for connecting to PLC

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	40	DIN rail/Direct attachment	Omron	8.5	Other	180	M3.5	CE / TUV	55	51

  From: 1,202,505 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type

  WAGO

  [Features]● Proven results. A best selling connector terminal block.● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.● For using fewer parts. No stopper required for aluminum DIN rails

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	32	With DIN rail	Omron	3.5	PLC	77	-	-	41.3	55

  From: 1,198,415 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PM-601 Series (Sensor / Actuator Station)

  WAGO

  [Features]● Direct coupling to PLC via straight connection cables.● Even if the PLC changes, the signal and common terminal block placement remain the same.● An ultra small connector terminal block with a horizontal width of 95/77 mm.● A 739 cage clamp terminal block with a pitch of 3.5 mm.● Boasts a wire connection range of 0.08 to 1.5 mm2. Even ultra thin sensor wire can be connected directly.● The signal and common terminal blocks are colored to make them easier to differentiate.● With common power supply terminal blocks, power can be passed horizontally with adjacent connector terminal blocks.● The circuit aligns with the PLC pin layout for products from various manufacturers.● The terminal block features an IP20 finger protection structure.● No stopper required for aluminum DIN rails.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	16	With DIN rail	Omron	3.5	PLC	95	-	-	41.3	55

  From: 1,398,676 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	TOYOGIKEN	MISUMI	TOYOGIKEN	OMRON	WAGO	MISUMI	PATLITE (KASUGA)	MISUMI	TOYOGIKEN	MISUMI	MISUMI	MISUMI	PATLITE (KASUGA)	YOSHIDADENKI	MISUMI	MISUMI	MISUMI	PATLITE (KASUGA)	WAGO	WAGO
Product SeriesDòng sản phẩm	MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminal	Terminal Block, PCN7 Series	MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: Spade	Terminal Block, PCN Series	Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)	Connector Terminal Block for Control Panels, PM-32 Series	MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct Mount	Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series	PLC Connector Terminal Block (for OMRON PLC, Input), Mounting Method: DIN Rail / Direct Mount	Connector Terminal Block, PCI Series, Crimp Terminal Type	PLC Connector Terminal Block (for OMRON PLC, Output), Mounting Method: DIN Rail / Direct Mount	PLC Connector Terminal Block (for OMRON PLC, Input)	MWI series (7mm pitch between terminals), terminal block screw type: Self-up	Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch	PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)	PLC Connector Terminal Block (for OMRON PLC, Output)	+comPLC connector terminal block (for Omron input, for output) MIL	MWI Series (Ultra Small)	Interface Terminal Block , Standard Type, 8.5mm Pitch	Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type	PM-601 Series (Sensor / Actuator Station)
CADCAD	2D	2D	2D	2D				2D	2D		2D	2D	2D	2D		2D	2D		2D
From	497,118 VND	699,138 VND	578,932 VND Special Price On Sale Till 31/03/2025	817,369 VND	1,173,103 VND	1,277,890 VND	642,895 VND	996,165 VND	830,976 VND	1,173,956 VND	789,170 VND	756,520 VND	1,601,925 VND	1,009,901 VND	1,356,685 VND	529,915 VND	695,747 VND	925,755 VND	1,202,505 VND	1,198,415 VND	1,398,676 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	Same day or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	Connection in Boards Space-saving PLC 125 V		c-UL Space-saving Sensor PLC 125 V				Connection in Boards Space-saving PLC 125 V		Connection in Boards Space-saving PLC 125 V		Connection in Boards Space-saving PLC 125 V	Connection in Boards Space-saving PLC 125 V	AC Servo 125 V			Connection in Boards Space-saving PLC 125 V	Connection in Boards Space-saving PLC 125 V	c-UL For Signal Space-saving Sensor PLC
Connector	MIL Connector	MIL Connector / FCN Connector	MIL Connector	MIL Connector / FCN Connector	MIL Connector	MIL Connector	FCN Connector	MIL Connector	FCN Connector	MIL Connector	MIL Connector / FCN Connector	MIL Connector	MDR connector	MIL Connector	FCN Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector	MIL Connector
Number of Poles(Pole)	20 ～ 50	20 ～ 40	20 ～ 40	20 ～ 40	34	32	40	20 ～ 40	40	20	40	40	50	40	40	40	40	20	40	32	16
Mounting Method	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	Other	With DIN rail	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail	DIN rail/Direct attachment	With DIN rail	With DIN rail
Supported equipment manufacturer	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron	Omron
Pitch Between Terminals(mm)	7	7	7	7.62	5 ～ 7	3.5	7	5	7	7.62	7	7	7	7	7.62	7	7	7.62	8.5	3.5	3.5
Supported equipment	PLC / Servo Motor	PLC	PLC	Other	-	PLC	PLC	Other	PLC	PLC	PLC	PLC	Servo Motor	Other	PLC	PLC	PLC	PLC	Other	PLC	PLC
Dimension width(mm)	76 ～ 181	80 ～ 149	80 ～ 150	86 ～ 162	98.5 ～ 130.7	42	146	64 ～ 105	129	162	129	125	185	150	101.21	125	125	55	180	77	95
Terminal Block Screw	M3	M3	M3	M3	Other	-	M3	-	M3	M3	M3	M3	M3	M3	M3	M3	M3	M3	M3.5	-	-
Representative Standard	-	UL / CUL / TUV	CUL	UL / CUL / TUV	-	-	-	CE / UL	-	UL / CUL / TUV	-	-	-	CE / UL / CUL / CSA	UL / CSA	-	-	CUL	CE / TUV	-	-
Dimension vertical(mm)	42	40	41.5	40	43.3 ～ 48.35	48.5	42	59	42	40	42	42	49	40	64	42	42	47	55	41.3	41.3
Dimension depth(mm)	51	36 ～ 36.8	42.5	36 ～ 36.8	50	85	51	42	42.4	36.8	42.4	51	45	42.3	48	51	51	50	51	55	55

Loading...Tải…