(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
[Features]
· At a glance Drive and guide unit in a single housing
· Minimal space requirement
· Minimal mounting time
· Choice of compressed air supply ports
· Wide range of mounting options
Sturdy and precise
· Good protection against torsion
· High rigidity
· Maintenance-free
High resistance to torques and transverse loads
· With plain-bearing guide: high rigidity thanks to large-diameter guide rods and four plain-bearing bushes
With recirculating ball bearing guide:for applications involving torque loads
Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pneumatic connection | M3 | M3 | M5 | M5 | M5 | G1/8 | G1/8 | G1/8 | G1/4 | G1/4 | G3/8 | G3/8 | |
Design | Piston | ||||||||||||
Piston rod | |||||||||||||
Guide rods with yoke | |||||||||||||
Cushioning | Elastic cushioning rings/plates at both ends | ||||||||||||
Position sensing | Via proximity switch | ||||||||||||
Type of mounting | With through-hole | ||||||||||||
With female thread | |||||||||||||
Mounting position | Any | ||||||||||||
Protection against torsion/guide | Guide rod with yoke/with plain-bearing or ball bearing guide | ||||||||||||
- | - | - | - | - | - | - | - | - | - | - | - | - | - |
Operating and environmental conditions | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | - | - | - | - | - | - | - | - | - | - | - |
Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
Operating pressure [bar] | 2 to 8 | 1.5 to 8 | 2 to 10 | 1.5 to 10 | 1 to 10 | 0.5 to 10 | |||||||
Operating medium | Compressed air to ISO 85731:2010 [7:4:4] | ||||||||||||
Note on operating/ pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||||||||||||
Ambient temperature [℃] | DFM-...-GF | -10 to +60 | -20 to +80 | ||||||||||
DFM-...-KF | - | -5 to +60 | |||||||||||
Corrosion resistance CRC | 1 |
Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cushioning P | ||||||||||||
Maximum speed, advancing | 1.3 | 1.7 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.6 | 0.6 | 0.4 | 0.4 |
Maximum speed, retracting | 1.1 | 1.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.6 | 0.6 | 0.4 | 0.4 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Stroke (mm) | Pneumatic connection | Piston diameter (mm) | Guide | Max. speed (m/s) | Impact energy in the end positions (J) | Max. force Fy (N) | Max. force Fz (N) | Max. torque Mx (Nm) | Max. torque My (Nm) | Max. torque Mz (Nm) | Theoretical force at 6 bar, retracting (N) | Theoretical force at 6 bar, advancing (N) | Moving mass (g) | Housing material | Cover material | Min. Operating pressure (bar) | Max. Operating pressure (bar) | Min. Ambient temperature (°C) | Max. Ambient temperature (°C) | Distance of centre of gravity of payload to yoke plate xs (mm) | Max. static moment Mx (Nm) | Max. static moment My (Nm) | Max. permissible torque load Mx as a function of the stroke (Nm) | Max. force Fz static (N) | Max. force Fy static (N) | Center of gravity of the moving mass as a function of the stroke (mm) | Max. static moment Mz (Nm) | Max. payload as a function of the stroke at defined distance xs (N) | Corrosion resistance class (CRC) | Manufacturer part # | Weight (g) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
11,804,940 VND | 1 Piece(s) | 15 Day(s) | 10 | 50 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 1371 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -20 | 80 | 50 | - | - | 6.5 | - | - | - | - | 150 | 1 - Low corrosion stress | 170865 | 2655 | ||
13,962,942 VND | 1 Piece(s) | 15 Day(s) | 10 | 50 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 18.66 | 18.66 | 686 | 754 | 1175 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 20.79 | 8 | 1260 | 1260 | 37.3 | 20.79 | 126 | 0 - No corrosion stress | 170940 | 2439 | ||
12,803,994 VND | 1 Piece(s) | 15 Day(s) | 10 | 80 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 1629 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -20 | 80 | 50 | - | - | 7.2 | - | - | - | - | 166 | 1 - Low corrosion stress | 170866 | 3261 | ||
15,719,508 VND | 1 Piece(s) | 15 Day(s) | 10 | 80 | G1/8 | 40 | Recirculating ball bearing guide | 0.6 | 0.7 | 1130 | 1130 | 49.74 | 28.83 | 28.83 | 686 | 754 | 1352 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 32.13 | 8.7 | 1260 | 1260 | 53.9 | 32.13 | 151 | 0 - No corrosion stress | 170941 | 2964 | ||
13,470,029 VND | 1 Piece(s) | 15 Day(s) | 10 | 100 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 1743 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -20 | 80 | 50 | - | - | 6.5 | - | - | - | - | 150 | 1 - Low corrosion stress | 170867 | 3595 | ||
16,889,796 VND | 1 Piece(s) | 15 Day(s) | 10 | 100 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 28.83 | 28.83 | 686 | 754 | 1433 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 32.13 | 7.74 | 1260 | 1260 | 62.1 | 32.13 | 138 | 0 - No corrosion stress | 170942 | 3265 | ||
14,302,386 VND | 1 Piece(s) | 15 Day(s) | 10 | 125 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 1983 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -20 | 80 | 50 | - | - | 7.3 | - | - | - | - | 168 | 1 - Low corrosion stress | 170868 | 4123 | ||
18,354,168 VND | 1 Piece(s) | 15 Day(s) | 10 | 125 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 40.13 | 40.13 | 686 | 754 | 1597 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 44.73 | 8.64 | 1260 | 1260 | 79 | 44.73 | 161 | 0 - No corrosion stress | 170943 | 3717 | ||
15,468,516 VND | 1 Piece(s) | 15 Day(s) | 10 | 160 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 2183 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -20 | 80 | 50 | - | - | 6.4 | - | - | - | - | 146 | 1 - Low corrosion stress | 170869 | 4736 | ||
20,402,549 VND | 1 Piece(s) | 15 Day(s) | 10 | 160 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 40.13 | 40.13 | 686 | 754 | 1738 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 44.73 | 7.49 | 1260 | 1260 | 94.4 | 44.73 | 143 | 0 - No corrosion stress | 170944 | 4271 | ||
16,800,588 VND | 1 Piece(s) | 15 Day(s) | 10 | 200 | G1/8 | 40 | Sliding guide | 0.8 | 0.7 | - | - | - | - | - | 686 | 754 | 2411 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -20 | 80 | 50 | - | - | 5.5 | - | - | - | - | 127 | 1 - Low corrosion stress | 170870 | 5437 | ||
22,744,260 VND | 1 Piece(s) | 15 Day(s) | 10 | 200 | G1/8 | 40 | Recirculating ball bearing guide | 0.8 | 0.7 | 1130 | 1130 | 49.74 | 40.13 | 40.13 | 686 | 754 | 1899 | Wrought aluminum alloy | Wrought aluminum alloy | 1.5 | 10 | -5 | 60 | 50 | 55.44 | 44.73 | 6.5 | 1260 | 1260 | 112.3 | 44.73 | 127 | 0 - No corrosion stress | 170945 | 4905 | ||
12,054,420 VND | 1 Piece(s) | 15 Day(s) | 10 | 25 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 2026 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 14.1 | - | - | - | - | 257 | 1 - Low corrosion stress | 170871 | 3440 | ||
13,916,826 VND | 1 Piece(s) | 15 Day(s) | 10 | 25 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 31.98 | 31.98 | 1057 | 1178 | 1796 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 88 | 34.4 | 19.35 | 1600 | 1600 | 30.6 | 34.4 | 235 | 0 - No corrosion stress | 170946 | 3212 | ||
12,972,582 VND | 1 Piece(s) | 15 Day(s) | 10 | 50 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 2254 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 11.8 | - | - | - | - | 216 | 1 - Low corrosion stress | 170872 | 4085 | ||
15,552,054 VND | 1 Piece(s) | 15 Day(s) | 10 | 50 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 31.98 | 31.98 | 1057 | 1178 | 1969 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 88 | 34.4 | 15.51 | 1600 | 1600 | 39.5 | 34.4 | 202 | 0 - No corrosion stress | 170947 | 3801 | ||
14,073,696 VND | 1 Piece(s) | 15 Day(s) | 10 | 80 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 2687 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 12.8 | - | - | - | - | 234 | 1 - Low corrosion stress | 170873 | 5013 | ||
17,514,629 VND | 1 Piece(s) | 15 Day(s) | 10 | 80 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 47.58 | 47.58 | 1057 | 1178 | 2287 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 88 | 51.2 | 16.43 | 1600 | 1600 | 57.4 | 51.2 | 233 | 0 - No corrosion stress | 170948 | 4614 | ||
14,808,906 VND | 1 Piece(s) | 15 Day(s) | 10 | 100 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 2870 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 11.6 | - | - | - | - | 212 | 1 - Low corrosion stress | 170874 | 5511 | ||
18,822,888 VND | 1 Piece(s) | 15 Day(s) | 10 | 100 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 47.58 | 47.58 | 1057 | 1178 | 2425 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 88 | 51.2 | 14.76 | 1600 | 1600 | 65.6 | 51.2 | 214 | 0 - No corrosion stress | 170949 | 5068 | ||
15,726,689 VND | 1 Piece(s) | 15 Day(s) | 10 | 125 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 3249 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 12.5 | - | - | - | - | 229 | 1 - Low corrosion stress | 170875 | 6302 | ||
20,458,494 VND | 1 Piece(s) | 15 Day(s) | 10 | 125 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 62.46 | 62.46 | 1057 | 1178 | 2703 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 88 | 67.2 | 15.77 | 1600 | 1600 | 82.8 | 67.2 | 238 | 0 - No corrosion stress | 170950 | 5758 | ||
17,012,268 VND | 1 Piece(s) | 15 Day(s) | 10 | 160 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 3569 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 11 | - | - | - | - | 200 | 1 - Low corrosion stress | 170876 | 7205 | ||
22,748,040 VND | 1 Piece(s) | 15 Day(s) | 10 | 160 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 62.46 | 62.46 | 1057 | 1178 | 2945 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 88 | 67.2 | 13.78 | 1600 | 1600 | 98.1 | 67.2 | 212 | 0 - No corrosion stress | 170951 | 6583 | ||
18,480,798 VND | 1 Piece(s) | 15 Day(s) | 10 | 200 | G1/4 | 50 | Sliding guide | 0.6 | 1 | - | - | - | - | - | 1057 | 1178 | 3935 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 9.6 | - | - | - | - | 174 | 1 - Low corrosion stress | 170877 | 8238 | ||
25,365,312 VND | 1 Piece(s) | 15 Day(s) | 10 | 200 | G1/4 | 50 | Recirculating ball bearing guide | 0.6 | 1 | 1487 | 1487 | 81.79 | 62.46 | 62.46 | 1057 | 1178 | 3221 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 88 | 67.2 | 12.04 | 1600 | 1600 | 115.9 | 67.2 | 189 | 0 - No corrosion stress | 170952 | 7525 | ||
13,342,266 VND | 1 Piece(s) | 15 Day(s) | 10 | 25 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 2471 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 15.9 | - | - | - | - | 257 | 1 - Low corrosion stress | 170878 | 4470 | ||
15,158,556 VND | 1 Piece(s) | 15 Day(s) | 10 | 25 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 31.98 | 31.98 | 1750 | 1870 | 2241 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 100 | 34.4 | 21.98 | 1600 | 1600 | 27.8 | 34.4 | 235 | 0 - No corrosion stress | 170953 | 4242 | ||
14,292,180 VND | 1 Piece(s) | 15 Day(s) | 10 | 50 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 2699 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 13.3 | - | - | - | - | 216 | 1 - Low corrosion stress | 170879 | 5243 | ||
16,996,014 VND | 1 Piece(s) | 15 Day(s) | 10 | 50 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 31.98 | 31.98 | 1750 | 1870 | 2413 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 100 | 34.4 | 17.62 | 1600 | 1600 | 35.8 | 34.4 | 202 | 0 - No corrosion stress | 170954 | 4959 | ||
15,431,849 VND | 1 Piece(s) | 15 Day(s) | 10 | 80 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 3130 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 14.4 | - | - | - | - | 234 | 1 - Low corrosion stress | 170880 | 6287 | ||
19,200,509 VND | 1 Piece(s) | 15 Day(s) | 10 | 80 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 47.58 | 47.58 | 1750 | 1870 | 2731 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 100 | 51.2 | 18.67 | 1600 | 1600 | 51.9 | 51.2 | 233 | 0 - No corrosion stress | 170955 | 5888 | ||
16,191,629 VND | 1 Piece(s) | 15 Day(s) | 10 | 100 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 3313 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 13.1 | - | - | - | - | 212 | 1 - Low corrosion stress | 170881 | 6904 | ||
20,670,174 VND | 1 Piece(s) | 15 Day(s) | 10 | 100 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 47.58 | 47.58 | 1750 | 1870 | 2868 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 100 | 51.2 | 16.77 | 1600 | 1600 | 59.4 | 51.2 | 214 | 0 - No corrosion stress | 170956 | 6461 | ||
17,141,166 VND | 1 Piece(s) | 15 Day(s) | 10 | 125 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 3692 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 14.1 | - | - | - | - | 229 | 1 - Low corrosion stress | 170882 | 7824 | ||
22,507,254 VND | 1 Piece(s) | 15 Day(s) | 10 | 125 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 62.46 | 62.46 | 1750 | 1870 | 3146 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 100 | 67.2 | 17.92 | 1600 | 1600 | 75.2 | 67.2 | 238 | 0 - No corrosion stress | 170957 | 7279 | ||
18,470,592 VND | 1 Piece(s) | 15 Day(s) | 10 | 160 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 4010 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 12.3 | - | - | - | - | 200 | 1 - Low corrosion stress | 170883 | 8906 | ||
25,079,166 VND | 1 Piece(s) | 15 Day(s) | 10 | 160 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 62.46 | 62.46 | 1750 | 1870 | 3386 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 100 | 67.2 | 15.66 | 1600 | 1600 | 89.6 | 67.2 | 212 | 0 - No corrosion stress | 170958 | 8283 | ||
19,990,529 VND | 1 Piece(s) | 15 Day(s) | 10 | 200 | G1/4 | 63 | Sliding guide | 0.6 | 1.3 | - | - | - | - | - | 1750 | 1870 | 4375 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -20 | 80 | 50 | - | - | 10.7 | - | - | - | - | 174 | 1 - Low corrosion stress | 170884 | 10142 | ||
28,018,494 VND | 1 Piece(s) | 15 Day(s) | 10 | 200 | G1/4 | 63 | Recirculating ball bearing guide | 0.6 | 1.3 | 1487 | 1487 | 92.97 | 62.46 | 62.46 | 1750 | 1870 | 3660 | Wrought aluminum alloy | Wrought aluminum alloy | 1 | 10 | -5 | 60 | 50 | 100 | 67.2 | 13.68 | 1600 | 1600 | 106.5 | 67.2 | 189 | 0 - No corrosion stress | 170959 | 9429 | ||
17,635,212 VND | 1 Piece(s) | 41 Day(s) | 10 | 25 | G3/8 | 80 | Sliding guide | 0.4 | 0.75 | - | - | - | - | - | 2827 | 3016 | 4141 | Wrought aluminum alloy | Wrought aluminum alloy | 0.5 | 10 | - | - | 125 | - | - | 21.4 | - | - | - | - | 276 | 1 - Low corrosion stress | - | - |
Loading...Tải…
Seals material | NBR | Piston rod material | High-alloy stainless steel | Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy