(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Caution
thận trọng
[10-Series Clean Series]
・ This product can be used in a clean environment.
・ Prevents dust generation in the cleanroom.
Valve specifications | Valve structure | Rubber seal | |
---|---|---|---|
Operating fluid | Air | ||
Maximum Operating Pressure | 0.7 MPa | ||
Minimum operating pressure | Single | 0.15 MPa | |
Double (double solenoid) | 0.1 MPa | ||
3 position | 0.2 MPa | ||
Ambient and operating fluid temperatures | -10 to +50°C^*1) | ||
Lubrication | Not required | ||
Pilot Valve – Manual Operation | Push type / locking type (tool required) | ||
Vibration / impact resistant^*2) | 30/150 m/s^2 | ||
Protective structure | Dust-proof | ||
Solenoid specifications | Coil rated voltage | 12 V DC, 24 V | |
Allowable voltage fluctuation | ±10% of rated voltage | ||
Coil insulation type | Type B or equivalent | ||
Power consumption (current) | 24 V DC | DC 0.4 W (17 mA), DC 0.95 W (40 mA)^*3) | |
12 V DC | DC 0.4 W (34 mA), DC 0.95 W (80 mA)^*3) |
*1) If the temperature is low, use dry air to prevent condensation.
*2) Vibration resistance: No malfunction when tested under 45 to 2,000 Hz 1 sweep, axial and perpendicular directions of the main valve / armature, energized and non-energized conditions. (Initial value)
Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state).
*3) Fast response type value.
Switching method | Sealing method | Part number | Flow rate characteristics^*1) | Response time [ms]^*2) | Weight (g) | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1→4/2 (P→A/B) | 4→5 (A→R1) | Standard (0.4W) | High speed response (0.95W) | |||||||||
C [dm^3/(s*bar)] | b | Cv | C [dm^3/(s*bar)] | b | Cv | |||||||
2-position | Single | Rubber seal | SQ1131 | 0.79 | 0.20 | 0.19 | 0.80 | 0.20 | 0.19 | 24 or less | 15 or less | 80 |
Double | Rubber seal | SQ1231D | 0.79 | 0.20 | 0.19 | 0.80 | 0.20 | 0.19 | 20 or less | 15 or less | 95 | |
3 positions | Closed Center | Rubber seal | SQ1331 | 0.64 | 0.20 | 0.15 | 0.58 | 0.26 | 0.16 | 39 or less | 25 or less | 100 |
Exhaust Center | Rubber seal | SQ1431 | 0.64 | 0.20 | 0.15 | 0.80 | 0.20 | 0.19 | 39 or less | 25 or less | 100 | |
Pressure Center | Rubber seal | SQ1531 | 0.79 | 0.21 | 0.19 | 0.59 | 0.20 | 0.14 | 39 or less | 25 or less | 100 |
*1) The value of the cylinder port pipe connection diameter C6, CYL. to EXH. 2 to 3 (B to R2) is approx. 30% lower than 4 to 5 (A to R1).
*2) Based on JIS B 8375-1981. (Values with a supply pressure of 0.5 MPa, and light/surge voltage suppressor. Values fluctuate depending on the pressure and air quality.)
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Switching Type | Number of Solenoids | Status at Power Off | Connecting Tube Diameter | Pressure Rating (MPa) | CV Value | Manual Switch | CE compliant | Piping specifications | Functions | Common specifications | Port plug mounting port | Type of manual operation | With/Without Manifold Block |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Lock | Non-compliant | Side ported | Standard type (0.4 W) | Positive common | None | Locking type (tool required type) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Lock | CE compliant product | Side ported | Standard type (0.4 W) | Positive common | 2(B) Port | Locking type (tool required type) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø4 | 0.15 to 0.7 | 0.19 | Non-Locking | Non-compliant | Side ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø4 | 0.15 to 0.7 | 0.19 | Non-Locking | Non-compliant | Side ported | Standard type (0.4 W) | Positive common | 2(B) Port | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø4 | 0.15 to 0.7 | 0.19 | Non-Locking | Non-compliant | Side ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | With manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø4 | 0.15 to 0.7 | 0.19 | Non-Locking | CE compliant product | Side ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Non-Locking | Non-compliant | Side ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Non-Locking | CE compliant product | Side ported | - | Positive common | None | - | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø4 | 0.15 to 0.7 | 0.19 | Non-Locking | Non-compliant | Top ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø4 | 0.15 to 0.7 | 0.19 | Non-Locking | CE compliant product | Top ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Non-Locking | Non-compliant | Top ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø4 | 0.15 to 0.7 | 0.19 | Lock | CE compliant product | Side ported | Standard type (0.4 W) | Negative common | None | Locking type (tool required type) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Non-Locking | Non-compliant | Side ported | Standard type (0.4 W) | Negative common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Non-Locking | Non-compliant | Side ported | Standard type (0.4 W) | Negative common | 2(B) Port | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Non-Locking | CE compliant product | Side ported | Standard type (0.4 W) | Negative common | 2(B) Port | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 2-Position Exhaust | [Single] Single | Self-Recovery (Spring Return) | Ø6 | 0.15 to 0.7 | 0.19 | Non-Locking | CE compliant product | Side ported | - | Negative common | None | - | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 3-Position Closed Center | Double | Self-Recovery (Spring Return) | Ø6 | 0.2 to 0.7 | 0.15 | Non-Locking | Non-compliant | Side ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 3-Position Closed Center | Double | Self-Recovery (Spring Return) | Ø6 | 0.2 to 0.7 | 0.15 | Non-Locking | CE compliant product | Side ported | Standard type (0.4 W) | Positive common | None | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 3-Position Closed Center | Double | Self-Recovery (Spring Return) | Ø6 | 0.2 to 0.7 | 0.15 | Non-Locking | Non-compliant | Top ported | Standard type (0.4 W) | Positive common | 2(B) Port | Non-locking push type (tool required) | Without manifold block | ||
- | 1 Piece(s) | Quote | 10 | 3-Position Closed Center | Double | Self-Recovery (Spring Return) | Ø6 | 0.2 to 0.7 | 0.15 | Non-Locking | Non-compliant | Side ported | Standard type (0.4 W) | Negative common | None | Non-locking push type (tool required) | Without manifold block |
Loading...Tải…
Number of Ports | 5-Port Valve | Application | Unit for Manifold Mounting | Voltage | DC24V |
---|---|---|---|---|---|
Mounting Orientation | Manifold Base | Pipe Port Type | One-Touch Plumbing | Specifications | Lubrication Free / Low Current |
Plumbing | Direct Plumbing | Applicable Cylinder Dia.(Ø) | 40 or less | Type | Solenoid Valves |
Driving Type | Pilot Type Spool | Seal Type | Soft Seal | Pilot Air Supply | Internal |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy