(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
[Features]
·A two-fluid fan-shaped nozzle that produces a "fine mist" with an average particle size of 100 microns or less.
·It is a liquid pressurized type that applies a pressure of about 0.1 to 0.3 MPa to the sprayed liquid and has a wide range of flow rate adjustment.
·Three spray angles: 110°, 80°, and 45°.
·A single nozzle can be used for either an even distribution over the entire fan-shaped area, or a distribution that is strong in the center and gradually weakens toward the ends.
[Applications]
·Spraying: Mold release agent, deodorizer, oil, surface treatment agent, corrosion inhibitor, lubricant, honey, insect repellent, urea water, etc.
·Cooling: Molds, gases, steel plates, steel pieces, castings, car bodies, painted materials, sheet glass, plastics, etc.
·Humidity control: Paper, waste gas, ceramics, concrete, etc.
·Washing: Precision circuit boards, glass tubes, etc.
N type
T Type
NDB type
UNDB type
SNB type
*1 Hole for air venting.
USNB type
*1 Hole for air venting.
SPB type
*1 Hole for air venting.
USPB type
*1 Hole for air venting.
·Four parts: nozzle tip, core, cap, and adapter
·Materials: S303
Classification of air consumption | Dimensions (mm) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
L1 | L2 | L3 | L4 | L5 | L6 | a | H1 | H2 | ⌀D | |
02 | 25.3 | 16.3 | 40.8 | 24.8 | 87.3 | 66.8 | 32 | 17 | 21 | 23.5 |
04*1 | 26.8 | 17.8 | 42.3 | 26.3 | 88.8 | 68.3 | 32 | 17 | 21 | 23.5 |
BIMJ2004 | 27.0 | 18.0 | 42.5 | 26.5 | 89.0 | 68.5 | 32 | 17 | 21 | 23.5 |
075 | 28.1 | 19.1 | 43.6 | 27.6 | 90.1 | 69.6 | 32 | 17 | 21 | 23.5 |
15 | 39.1 | 26.6 | 60.1 | 38.1 | 97.6 | 77.1 | 43 | 23 | 29 | 32.5 |
22 | 41.3 | 28.8 | 62.3 | 40.3 | 99.8 | 79.3 | 43 | 23 | 29 | 32.5 |
* 1 Nozzles other than BIMJ2004.
Classification of jet angle^*2 | Classification of air consumption | Air pressure (MPa) | Injection volume (L/hr)/ air consumption (NL/minute) | Spray width (mm)^*3 | Average particle size (µm) | Contaminant passage diameter (mm) | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Liquid pressure (MPa) | Liquid pressure (MPa) | Laser Doppler method | Chip Nozzle | Adapter | ||||||||||
0.1 | 0.15 | 0.2 | 0.25 | 0.3 | 0.1 | 0.15 | 0.25 | Liquid | Air | |||||
110 | 02 | 0.2 0.3 0.4 | 2.2/14 1.0/20 — | 5.3/11 2.5/19 1.4/25 | — 4.6/17 2.3/24 | — 8.3/12 4.0/23 | — 14.3/7 6.3/20 | 280 220 — | 340 250 230 | — 420 340 | 20 to 100 | 0.2 | 0.9 | 0.7 |
04 | 0.2 0.3 0.4 | 4.5/25 2.0/36 — | 9.5/20 4.7/35 2.8/45 | 17.0/13 8.5/31 4.8/44 | — 13.1/27 7.7/41 | — 19.6/20 11.4/37 | 300 230 — | 360 270 250 | — 430 350 | 20 to 100 | 0.3 | 0.9 | 0.9 | |
075 | 0.2 0.3 0.4 | 8.7/51 4.0/74 — | 18.4/42 8.8/71 5.6/91 | 33.3/29 15.5/64 9.1/89 | — 24.3/54 14.8/82 | — 38.5/40 21.8/74 | 320 240 — | 380 300 270 | — 450 370 | 20 to 100 | 0.5 | 1.2 | 1.4 | |
15 | 0.2 0.3 0.4 | 16.8/107 8.0/150 — | 34.8/90 17.7/144 11.2/190 | 64.4/60 30.8/130 18.3/183 | — 50.0/108 29.1/172 | — 74.5/87 42.9/154 | 340 270 — | 400 320 280 | — 470 380 | 20 to 100 | 0.8 | 1.8 | 1.9 | |
22 | 0.2 0.3 0.4 | 22.3/140 11.5/200 — | 45.6/116 23.9/189 15.3/245 | 92.1/77 41.3/169 24.5/238 | — 68.5/138 39.1/220 | — 107/103 57.7/198 | 350 280 — | 420 330 300 | — 490 400 | 20 to 100 | 0.9 | 2.1 | 2.2 | |
80 | 02 | 0.2 0.3 0.4 | 2.2/14 1.0/20 — | 5.3/11 2.5/19 1.4/25 | — 4.6/17 2.3/24 | — 8.3/12 4.0/23 | — 14.3/7 6.3/20 | 200 170 — | 260 210 200 | — 300 250 | 20 to 100 | 0.3 | 0.9 | 0.7 |
04 | 0.2 0.3 0.4 | 4.5/25 2.0/36 — | 9.5/20 4.7/35 2.8/45 | 17.0/13 8.5/31 4.8/44 | — 13.1/27 7.7/41 | — 19.6/20 11.4/37 | 200 170 — | 260 210 200 | — 310 260 | 20 to 100 | 0.4 | 0.9 | 0.9 | |
075 | 0.2 0.3 0.4 | 8.7/51 4.0/74 — | 18.4/42 8.8/71 5.6/91 | 33.3/29 15.5/64 9.1/89 | — 24.3/54 14.8/82 | — 38.5/40 21.8/74 | 200 170 — | 270 210 200 | — 310 260 | 20 to 100 | 0.6 | 1.2 | 1.4 | |
15 | 0.2 0.3 0.4 | 16.8/107 8.0/150 — | 34.8/90 17.7/144 11.2/190 | 64.4/60 30.8/130 18.3/183 | — 50.0/108 29.1/172 | — 74.5/87 42.9/154 | 210 180 — | 280 220 200 | — 320 270 | 20 to 100 | 0.9 | 1.8 | 1.9 | |
22 | 0.2 0.3 0.4 | 22.3/140 11.5/200 — | 45.6/116 23.9/189 15.3/245 | 92.1/77 41.3/169 24.5/238 | — 68.5/138 39.1/220 | — 107/103 57.7/198 | 210 180 — | 280 220 210 | — 330 280 | 20 to 100 | 1.1 | 2.1 | 2.2 | |
45 | 02 | 0.2 0.3 0.4 | 2.2/14 1.0/20 — | 5.3/11 2.5/19 1.4/25 | — 4.6/17 2.3/24 | — 8.3/12 4.0/23 | — 14.3/7 6.3/20 | 100 80 — | 130 110 100 | — 150 130 | 20 to 100 | 0.4 | 0.9 | 0.7 |
04 | 0.2 0.3 0.4 | 4.5/25 2.0/36 — | 9.5/20 4.7/35 2.8/45 | 17.0/13 8.5/31 4.8/44 | — 13.1/27 7.7/41 | — 19.6/20 11.4/37 | 100 80 — | 130 110 100 | — 150 130 | 20 to 100 | 0.5 | 0.9 | 0.9 | |
075 | 0.2 0.3 0.4 | 8.7/51 4.0/74 — | 18.4/42 8.8/71 5.6/91 | 33.3/29 15.5/64 9.1/89 | — 24.3/54 14.8/82 | — 38.5/40 21.8/74 | 100 80 — | 140 110 100 | — 160 140 | 20 to 100 | 0.9 | 1.2 | 1.4 | |
15 | 0.2 0.3 0.4 | 16.8/107 8.0/150 — | 34.8/90 17.7/144 11.2/190 | 64.4/60 30.8/130 18.3/183 | — 50.0/108 29.1/172 | — 74.5/87 42.9/154 | 110 90 — | 150 120 110 | — 170 150 | 20 to 100 | 1.2 | 1.8 | 1.9 | |
22 | 0.2 0.3 0.4 | 22.3/140 11.5/200 — | 45.6/116 23.9/189 15.3/245 | 92.1/77 41.3/169 24.5/238 | — 68.5/138 39.1/220 | — 107/103 57.7/198 | 110 90 — | 160 120 110 | — 180 150 | 20 to 100 | 1.6 | 2.1 | 2.2 |
* 2 The spray angle is based on a pressurized air pressure of 0.3 MPa and a liquid pressure of 0.1 MPa.
* 3 The spray width is based on a spray distance of 100 mm.
Part Number |
---|
BIMV11022S303+TS303 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Classification by Spray Angle (the spray angle under the standard atmosphere pressure) (deg) | Air consumption category | Adapter Type | Foreign Objects Pass Diameter (Chip Injection Ports) (mm) |
---|---|---|---|---|---|---|---|---|---|
3,927,430 VND | 1 Piece(s) | 9 Day(s) or more | 10 | 110 | 22 | T Shaped | 0.9 |
Loading...Tải…
Spray Pattern | Standard Fan-Shaped | Fluid | two-fluid mixing | Material | SUS303 |
---|---|---|---|---|---|
Type | Two Fluid | Features | Fine Mist Generating | Applicable Fluid | Air, compressed air / Oil / Chemical Solution / Water / Urea Aqueous / Lubricant |
Please check the type/dimensions/specifications of the part BIMV11022S303+TS303 in the Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Flat Fan Shape, BIMV Series (Pressurized Liquid Type) series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần BIMV11022S303+TS303 trong chuỗi Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Flat Fan Shape, BIMV Series (Pressurized Liquid Type).
Part Number |
---|
BIMV11004S303+NS303 |
BIMV11004S303+TS303 |
BIMV110075S303+NS303 |
BIMV4502S303+NS303 |
BIMV4502S303+TS303 |
BIMV4504S303+NS303 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Classification by Spray Angle (the spray angle under the standard atmosphere pressure) (deg) | Air consumption category | Adapter Type | Foreign Objects Pass Diameter (Chip Injection Ports) (mm) |
---|---|---|---|---|---|---|---|---|---|
4,341,780 VND | 1 Piece(s) | 16 Day(s) or more | 10 | 110 | 04 | N Shape | 0.3 | ||
3,608,701 VND | 1 Piece(s) | 9 Day(s) or more | 10 | 110 | 04 | T Shaped | 0.3 | ||
4,341,780 VND | 1 Piece(s) | 16 Day(s) or more | 10 | 110 | 075 | N Shape | 0.5 | ||
4,341,780 VND | 1 Piece(s) | 16 Day(s) or more | 10 | 45 | 02 | N Shape | 0.4 | ||
3,608,701 VND | 1 Piece(s) | 9 Day(s) or more | 10 | 45 | 02 | T Shaped | 0.4 | ||
4,341,780 VND | 1 Piece(s) | 16 Day(s) or more | 10 | 45 | 04 | N Shape | 0.5 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy