(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Toolless clamp with rotating hook by lever operation. Lever type.
Black electroless nickel plating specification available. Both right and left rotational specifications available.
[Features]
· Clamp with rotating hook and lever operation.
Black oxide coating type
Electroless nickel plating type
Type | Body, Lever, Adjusting Bolt | Hook | Cam Shaft | Grip |
---|---|---|---|---|
QLSWC | S45C Hardening Black oxide coating | SCM440 Hardening Black oxide coating | SCM415 Carburization Black oxide coating | Phenol resin Black |
QLSWC-NP | S45C Hardening Electroless nickel plating | SCM440 Hardening Electroless nickel plating | SCM415 Carburization Electroless nickel plating |
Left-rotating type
Right-rotating type
Dimensional drawing of point clamp (for black surfaces)
Dimensional drawing of flat clamp (for finished surfaces)
Part Number | Swivel Direction | Clamp Height - Note 1) | Clamp Stroke | Fast Feed Stroke | L2 | L3 | L1 | L4 | W | L | H5 | B | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flat Clamp (For Finished Surfaces) | Point Clamp (For Black Surfaces) | ||||||||||||||
At Min. | At Max. | At Min. | At Max. | ||||||||||||
QLSWC100R | Right | 22.8 (22.3 to 23.3) | 24.8 (24.3 to 25.3) | 22.4 (21.9 to 22.9) | 24.4 (23.9 to 24.9) | 1 | 0.8 | 22 | 6 | 26 | 11.5 | 36 | 18 | 6 | 4.3 |
QLSWC100L | Left | ||||||||||||||
QLSWC150R | Right | 31.3 (30.6 to 32) | 33.3 (32.6 to 34) | 32.2 (31.5 to 32.9) | 34.2 (33.5 to 34.9) | 1.4 | 1.1 | 30 | 8 | 35 | 15.3 | 45 | 23 | 8 | 5.3 |
QLSWC150L | Left | ||||||||||||||
QLSWC200R | Right | 32.5 (31.7 to 33.2) | 39 (38.2 to 39.7) | 33.5 (32.7 to 34.2) | 40 (39.2 to 40.7) | 1.5 | 1.4 | 37 | 45 | 20.7 | 65 | 30 | 12 | 8.4 | |
QLSWC200L | Left | ||||||||||||||
QLSWC300R | Right | 36.5 (35.5 to 37.4) | 46 (45 to 46.9) | 39 (38 to 39.9) | 48.5 (47.5 to 49.4) | 1.9 | 1.7 | 45 | 55 | 25.4 | 85 | 40 | 15 | 10.5 | |
QLSWC300L | Left |
Part Number | Dp | H | D | W1 | W2 | H3 | H2 | M | H4 | R | A | H1 | Lever Load (N) - Note 2) | Clamping Force (kN) | Clamp Mechanism |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
QLSWC100R | 27 | 49 | 18 | 8 | 4.3 | 10 | 30 | M4 × 0.7 | 22.8 | 50 | 15 | 45.8 | 100 | 1.1 | Spiral cam Cam angle 5° |
QLSWC100L | |||||||||||||||
QLSWC150R | 34 | 66 | 23 | 10 | 5.3 | 14 | 40 | M5 × 0.8 | 28.5 | 63 | 20 | 61.3 | 150 | 1.8 | |
QLSWC150L | |||||||||||||||
QLSWC200R | 48 | 82 | 30 | 16 | 8.4 | 18 | 50 | M 8 × 1.25 | 45.5 | 80 | 26 | 76.5 | 200 | 2.2 | Spiral cam Cam angle 4° |
QLSWC200L | |||||||||||||||
QLSWC300R | 64 | 100 | 40 | 20 | 10.4 | 22 | 60 | M10 × 1.5 | 57 | 100 | 33 | 93 | 300 | 3.5 | |
QLSWC300L |
Part Number | Weight (g) |
---|---|
QLSWC100R | 112 |
QLSWC100L | |
QLSWC150R | 250 |
QLSWC150L | |
QLSWC200R | 570 |
QLSWC200L | |
QLSWC300R | 1,200 |
QLSWC300L |
QLSWC (black oxide coating)
Part Number | Weight (g) |
---|---|
QLSWC100R-NP | 112 |
QLSWC100L-NP | |
QLSWC150R-NP | 250 |
QLSWC150L-NP | |
QLSWC200R-NP | 570 |
QLSWC200L-NP | |
QLSWC300R-NP | 1,200 |
QLSWC300L-NP |
QLSWC-NP (electroless nickel plating)
1. Unclamping position
The workpiece is attached and removed when the clamp is in the unclamped position.
2. Hook rotation
Turning the lever causes the hook to swing.
3. Fast feed
Turning the lever further causes the hook to fast-forward towards the workpiece.
4. Clamp
Turn the lever to clamp.
Changing the lever position
Since the lever is a 12-point wrench, its position can be changed every 30°.
The allowable load from the back per swing clamp is shown in the table on the right.
Do not exceed this load when machining the workpiece from the back side.
Size | Allowable Load From Back (Per Clamp) |
---|---|
QLSWC100 | Max. 2.3 kN |
QLSWC150 | Max. 3.6 kN |
QLSWC200 | Max. 3.7 kN |
QLSWC300 | Max. 5.6 kN |
Allowable load when machining the back surface
Part Number |
---|
QLSWC300L |
QLSWC300L-NP |
QLSWC300R |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Tightening Force (Range Selectable) (N) | Surface Treatment | Swivel direction | Clamping Force (N) | Outer Diameter D (φ) | Thread Diameter M | Trusco Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|
5,555,555 VND | 1 Piece(s) | 12 Day(s) | 10 | 3000~ | Black Oxide Coating | Left | 3500 | 40 | 10X1.5 | - | ||
6,456,055 VND | 1 Piece(s) | 85 Day(s) or more | 10 | 3000~ | Electroless Nickel Plating | Left | 3500 | 40 | 10X1.5 | - | ||
5,555,555 VND | 1 Piece(s) | 12 Day(s) | 10 | 3000~ | Black Oxide Coating | Right | 3500 | 40 | 10X1.5 | - |
Loading...Tải…
Type | Main Body |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy