(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- MISUMI Việt Nam đồng hành cùng Kỹ sư tương lai trong cuộc thi SMAE Award 2024. Xem chi tiết.
MISUMI Vietnam accompanies Future Engineers in the SMAE Award 2024 competition. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Applicable Tube O.D.1(φ)
-
Connection Screw Type 1
- M
- R
-
Nominal of Thread 1
- 1/2
- 1/4
- 1/8
- 3/8
- M5×0.8
- M6×1
-
type
- PC-SUS
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 4 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Corrosion-Resistant SUS304 Fitting, Straight
- Until 31/05/2024
- All
- Sale Items
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 621,670VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
If strength is required, optimal for chemical atmospheres.
Corrosion-Resistant Tube Fitting Stainless SUS304 - Straight Specifications
Corrosion-resistant Tube Fitting Stainless SUS304 - Straight appearance
Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing
Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing
(metric thread type)
Usable fluids: air, water (see conditions*), other (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: 0 to 60°C (no freezing)
Warning
- *When the fluid used is water or other liquids, the following conditions must be observed.
- When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- Be sure to use an insert ring when using water or other liquids.
- For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.
Size Chart
| Format | Tube Outer Diameter øD | R | A | B | L | Tube End C | Hex H | Orifice Diameter (ømm) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|
| PC4-M5SUS | 4 | M5 × 0.8 | 3 | 20.1 | 17.1 | 15 | 10 | 1.8 | 5.9 |
| PC4-M6SUS | M6 × 1 | 4 | 21.1 | 3 | 6.2 | ||||
| PC4-01SUS | R1/8 | 8 | 7.8 | ||||||
| PC4-02SUS | R1/4 | 11 | 15.1 | 14 | 15 | ||||
| PC6-M5SUS | 6 | M5 × 0.8 | 3 | 22.2 | 19.2 | 17.1 | 12 | 1.8 | 8.5 |
| PC6-M6SUS | M6 × 1 | 4 | 23.2 | 3 | 8.8 | ||||
| PC6-01SUS | R1/8 | 8 | 22.7 | 18.7 | 4.6 | 8.7 | |||
| PC6-02SUS | R1/4 | 11 | 24.7 | 14 | 17 | ||||
| PC6-03SUS | R3/8 | 12 | 23.7 | 17.4 | 17 | 26 | |||
| PC8-01SUS | 8 | R1/8 | 8 | 27.9 | 23.9 | 18.2 | 14 | 6 | 15 |
| PC8-02SUS | R1/4 | 11 | 26.6 | 20.6 | 7 | ||||
| PC8-03SUS | R3/8 | 12 | 23.9 | 17.6 | 17 | 22 | |||
| PC10-01SUS | 10 | R1/8 | 8 | 30.5 | 26.5 | 20.9 | 17 | 6 | 22 |
| PC10-02SUS | R1/4 | 11 | 30 | 24 | 8.5 | 20 | |||
| PC10-03SUS | R3/8 | 12 | 29.5 | 23.2 | 25 | ||||
| PC10-04SUS | R1/2 | 15 | 30.5 | 22.3 | 21 | 47 | |||
| PC12-02SUS | 12 | R1/4 | 11 | 36.1 | 30.1 | 23.5 | 21 | 8.5 | 41 |
| PC12-03SUS | R3/8 | 12 | 32.1 | 25.8 | 11 | 34 | |||
| PC12-04SUS | R1/2 | 15 | 34.1 | 25.9 | 47 | ||||
| PC16-03SUS | 16 | R3/8 | 12 | 39.5 | 33.2 | 25 | 24 | 11 | 56 |
| PC16-04SUS | R1/2 | 15 | 41.5 | 33.3 | 13 | 63 |
Units: mm
- *Taper thread type L dimensions are reference dimensions after tightening with screws.
Applicable Tube Size
Millimeter size: ø4 (diameter 4 mm), ø6 (diameter 6 mm), ø8 (diameter 8 mm), ø10 (diameter 10 mm), ø12 (diameter 12 mm), ø16 (diameter 16 mm)
Applicable Tube Size
| Metric Thread | M5 × 0.8, M6 × 1 |
|---|---|
| Taper Pipe Thread | R1/8, R1/4, R3/8, R1/2 |
- *See the manufacturer's catalog for other precautions and important notes.
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 |
|---|---|---|---|---|---|---|---|
728,121 VND | 1 Piece(s) | 4 Day(s) or more | 4 | R | 1/8 | ||
801,508 VND | 1 Piece(s) | 4 Day(s) or more | 4 | R | 1/4 | ||
621,670 VND 381,084 VND | 1 Piece(s) | Same day | 4 | M | M5×0.8 | ||
835,366 VND | 1 Piece(s) | 10 Day(s) or more | 4 | M | M6×1 | ||
864,861 VND 441,944 VND | 1 Piece(s) | Same day | 6 | R | 1/8 | ||
792,456 VND | 1 Piece(s) | 4 Day(s) or more | 6 | R | 1/4 | ||
866,458 VND 453,158 VND | 1 Piece(s) | Same day | 6 | R | 3/8 | ||
791,578 VND | 1 Piece(s) | 4 Day(s) or more | 6 | M | M5×0.8 | ||
791,688 VND 414,845 VND | 1 Piece(s) | Same day | 6 | M | M6×1 | ||
921,258 VND | 1 Piece(s) | 11 Day(s) or more | 8 | R | 1/8 | ||
851,598 VND 446,237 VND | 1 Piece(s) | Same day | 8 | R | 1/4 | ||
888,731 VND | 1 Piece(s) | 4 Day(s) or more | 8 | R | 3/8 | ||
1,259,846 VND | 1 Piece(s) | 4 Day(s) or more | 10 | R | 1/8 | ||
1,230,576 VND | 1 Piece(s) | 11 Day(s) or more | 10 | R | 1/4 | ||
1,231,125 VND | 1 Piece(s) | 4 Day(s) or more | 10 | R | 3/8 | ||
1,233,535 VND | 1 Piece(s) | 4 Day(s) or more | 10 | R | 1/2 | ||
1,343,601 VND | 1 Piece(s) | 4 Day(s) or more | 12 | R | 1/4 | ||
1,313,893 VND | 1 Piece(s) | 11 Day(s) or more | 12 | R | 3/8 | ||
1,344,258 VND | 1 Piece(s) | 4 Day(s) or more | 12 | R | 1/2 | ||
1,470,888 VND | 1 Piece(s) | 11 Day(s) or more | 16 | R | 3/8 | ||
1,500,815 VND | 1 Piece(s) | 9 Day(s) or more | 16 | R | 1/2 |
Loading...Tải…
Basic InformationThông tin cơ bản
| Types | One-Touch Couplings | Fitting Type | Screw Mount Direction | Applicable Fluid | Water / Air / Chemicals、Solvent / Mixed Gas |
|---|---|---|---|---|---|
| Body Material | SUS304 | Application | Standard/Mini / Foods・Drug-Related | Screw Mounting, Direction | Straight |
| Operating Temperature(°C) | 0::60 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy