SS30WS UL-Supported, Dual-Layer Shield (SS30WS-5P-100)

Specifications

Model Number	Number of Pairs *4 1P = 2 Cores	Total Length *3 or Specified Length
SS30WS	5P	1 ~ 100 (Specify 1 m Increments) · 500 · 1000
	8P
	10P
	13P
	17P
	20P
	25P
	30P
	32P
	34P
	50P

Be sure to read the following precautions when you place an order.
* Length in "m" is included in our model numbers. Always specify quantity as number of units, not as meters.
*1 Stock products are indicated with T or A in the price column at right.
*2 All unit prices above are per meter.
Unit Price Calculation Method [Formula: Last digits of model number (m) x unit price per meter above]
*3 Please note that when ordering 1000 m and 500 m, the order will be delivered as 100 m windings
(we cannot accept orders for single cables).
*4 Check the indications for number of cores, pair number, core / pair number, and pair number / core when
ordering.

More Information

Specifications

Model Number	Pair No. *1 1P = 2-core	AWG Size	Estimated Section Area (mm2) *2	Twisted Structure (See Figure)	Number of Wire Cores	Finished Outer Diameter (mm)	Approximate Mass kg / km	Electrical Properties				Conductor			Insulation		Wire Core Outer Diameter Approx. (mm)	Sheath		Specification	Sample Provided
								Allowable Current A (30 °C) *3	Conductor Resistance Ω / km (20°C)	Insulation Properties MΩ km (20 °C)	Withstand Voltage V / min	Structure Pc / mm	Outer Diameter Approx. (mm)	Plating *4	Thickness (mm)	Material *4		Thickness (mm)	Material *4
SS30WS	5P	28	0.08	Twisted Pair	10	5	41	1	240 or less	10 or more	300	7/0.127	0.38	Tin	0.1	PVC	0.58 ± 0.02	0.81	PVC	ULAWM 20276	◎
	8P				16	5.5	52	1	246 or less												◎
	10P				20	6.1	59	1													◎
	13P				26	6.5	71	1													◎
	17P				34	7.2	85	1													◎
	20P				40	7.6	101	1.23													◎
	25P				50	8.1	113	1.14													◎
	30P				60	9	139	1.04													◎
	32P				64	9	148	1.04													◎
	34P				68	9	160	0.93													◎
	50P				100	10.5	180	0.93													◎

*1 Please note that when the indicated Core / Pair is 1P (1PS), the number of wire cores will be "x 2-core".
*2 The size conversion is for reference only. Refer to the comparison table on >>Click here for details.
*3 The value of allowable current is to be used only as a reference value and is not guaranteed.
*4 How to View Materials
[Plating] Tin... Tin Plated Annealed Copper Wire
[Materials] PVC... Polyvinyl Chloride; PE... Polyethylene-based Material;
P... Polyester-based Material; Fluorine... Various Fluorine Resins; *... Other
 

Current Reduction Factor

Ambient Temperature (°C)	30	40	50	60	70
Current Reduction Factor	1.00	0.89	0.77	0.63	0.45

Allowable current value indicates the calculated value of 1 cable laid aboveground in ambient temperature of 30°C, and is not a guaranteed value. If the ambient temperature is 30 °C or above, the above current reduction factor is multiplied by the allowable current.
(Example) AWG26: Allowable current value when the ambient temperature is 40 °C at 1P
2.2 x 0.89 = 1.958 (A)