(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Table Length(mm)
-
Cable Length(m)
- 2
- 4
-
Cover Position
- L
- R
-
type
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 14 Day(s) or Less
Specify AlterationsChỉ định thay đổi
XY-Axis Motorized Positioning Stages
- Volume Discount
You can add up to 6 items per a category to the compare list.
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 18,042,553VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
thận trọng
- **RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Similar Products
Product Detail
The above figure shows the situation when cover L is selected. Please check the detailed dimensions by CAD data when selecting the cover R.
When the 820 cover in the above figure is L-shaped, the upper shaft is L-shaped and the lower shaft is R-shaped. When the 820 cover is R-shaped, the upper shaft isR-shaped and the lower shaft is L-shaped.
Motor side connector cable lengths vary by model and are subject to the actual products.
The purchased model already includes the XY-Axis stage body, the corresponding driver and cable, so no need to purchase separately.
Accessory: Locating pin Quantity: 4 pcs
■ Movement
It refers to the distance that the XY-Axis stage surface can move. (On each product page, illustration is made in the stroke center.)
■ Load capacity
It refers to the value of capacity that can be driven at the maximum speed with the maximum load that can be applied in the center of the XY-Axis stage surface.
■ One-way positioning accuracy
It refers to the maximum difference between the measured distance (from the reference point to the position actually moved to) and the theoretical distance (from the reference point to the position that should be moved to as instructed)of each positioning point, which is measured and calculated within the full stroke after positioning is carried out in one direction at a certain interval from the reference point (the end of the stroke).
■ Repetitive positioning accuracy
Repeat positioning at the same point from the same direction 7 times, measure the offset of the stop position, and then calculate 1/2 of the maximum difference of this offset. Repeat this operation at 3 points between the center and bothends of the stroke, and define the maximum calculation value as the repetitive positioning accuracy.
Product Overview of XY-Axis stage
MISUMI C-XYMBS series motorized XY-Axis stage is an economy series XY-Axis stage equipped with a two-phase stepper motor. It can be used as a XY-Axis stage to adjust the position of automation equipment. Its main body is madeof quenched stainless steel (equivalent to SUS440C), which is treated with chemical nickel plating, thereby achieving high rigidity and strong anti-rust performance. An integrated linear ball guide is adopted as the guiding mechanism toprovide the required accuracy. The price has been substantially reduced by streamlining the structure and improving the process.
Product Feature of XY-Axis stage
Feature 1. Low price is achieved by streamlining the structure and improving the process.
Feature 2. Strokes from 18 mm to 43 mm are made available by rearranging steel balls, extending lower seats, etc.
Feature 3. The 80 series motorized XY-Axis stage has its sensor built-in to save space.
Feature 4: Quick disassembling is achieved by adding positioning holes to the upper and lower seats of the stage.
Feature 5. The positioning holes for 40/60/80 series have common diameters and positions, enabling a diversified combination of XY-Axis stages with different dimensions.
Feature 6. The voltage of the limit sensor/driver has been expanded to 32 V, reducing burnout and other failures due to unstable voltage.
Feature 2. Strokes from 18 mm to 43 mm are made available by rearranging steel balls, extending lower seats, etc.
Feature 3. The 80 series motorized XY-Axis stage has its sensor built-in to save space.
Feature 4: Quick disassembling is achieved by adding positioning holes to the upper and lower seats of the stage.
Feature 5. The positioning holes for 40/60/80 series have common diameters and positions, enabling a diversified combination of XY-Axis stages with different dimensions.
Feature 6. The voltage of the limit sensor/driver has been expanded to 32 V, reducing burnout and other failures due to unstable voltage.
Dimensional Drawing of XY-Axis stage
The above figure shows the situation when cover L is selected. Please check the detailed dimensions by CAD data when selecting the cover R.When the 820 cover in the above figure is L-shaped, the upper shaft is L-shaped and the lower shaft is R-shaped. When the 820 cover is R-shaped, the upper shaft isR-shaped and the lower shaft is L-shaped.Motor side connector cable lengths vary by model and are subject to the actual products.The purchased model already includes the XY-Axis stage body, the corresponding driver and cable, so no need to purchase separately.Specifications Overview of XY-Axis stage
 Material |  Surface Treatment | Movement (mm) | Load Capacity (N) | Single-Axis Accuracy Specification (μm) | |
| One-Way Positioning Accuracy | Repetitive Positioning Accuracy | ||||
| Equivalent to SUS440C | Electroless Nickel Plating | 18~43 | 94~109 | Within 20 | ±Within 5.0 |
Accessory: Locating pin Quantity: 4 pcs■ Movement
It refers to the distance that the XY-Axis stage surface can move. (On each product page, illustration is made in the stroke center.)
■ Load capacity
It refers to the value of capacity that can be driven at the maximum speed with the maximum load that can be applied in the center of the XY-Axis stage surface.
■ One-way positioning accuracy
It refers to the maximum difference between the measured distance (from the reference point to the position actually moved to) and the theoretical distance (from the reference point to the position that should be moved to as instructed)of each positioning point, which is measured and calculated within the full stroke after positioning is carried out in one direction at a certain interval from the reference point (the end of the stroke).
■ Repetitive positioning accuracy
Repeat positioning at the same point from the same direction 7 times, measure the offset of the stop position, and then calculate 1/2 of the maximum difference of this offset. Repeat this operation at 3 points between the center and bothends of the stroke, and define the maximum calculation value as the repetitive positioning accuracy.
Usage Method of XY-Axis stage
The C-XYMBS series XY-Axis stage has been equipped with the two-phase stepper motor, MISUMI two-phase stepper motor driver (C-DR42A) and 2 m cable. Customers only need to prepare the 24 V power supply and host computer (PLC or motioncontrol card) to use it. The example of connection among various products is shown in the figure below.
* 1 The cable in the dotted box is 2m cable
* 1 The cable in the dotted box is 2m cable
Related Documents of XY-Axis stage
■ For information on Driver C-DR42A, please click on 
Two-phase Stepper Motor Driver C-DR42A.
■ Drawing of the locating pin
Two-phase Stepper Motor Driver C-DR42A.■ Drawing of the locating pin
Precautions of XY-Axis stage
■ XY-Axis stage operating environment
Operating environment: 10~50℃, 20~70% RH (without condensation)
Recommended operating environment: 22±5℃, 20~70%RH (without condensation)
Please avoid using this XY-Axis stage in the following environments
① Dusty environment (especially metal powder)
② Environment with direct sunlight and thermal radiation
③ Environment near fire sources
④ Environment containing corrosive gases and flammable gases
⑤ Environment with splashing water and oil
⑥ Environment with strong vibration and impact
⑦ Environment containing organic solutions and salt
■XY-Axis stage maintenance
A uniform maintenance standard is not available, and the maintenance method is subject to the type of grease and operating environment. Based on the driving conditions and guide types, make sure to check the grease once a month.
■ About wiring
The motors and sensors of this product are wired externally with cables and connectors. If the cable on the XY-Axis stage side is frequently bent, it may cause the cable tie to break, and thus cause loosening of the motor terminal andsensor terminal, resulting in poor contact or core wire breakage. It is recommended to fix the connector on the XY-Axis stage side during wiring.
Drawings are for reference only
Operating environment: 10~50℃, 20~70% RH (without condensation)
Recommended operating environment: 22±5℃, 20~70%RH (without condensation)
Please avoid using this XY-Axis stage in the following environments
① Dusty environment (especially metal powder)
② Environment with direct sunlight and thermal radiation
③ Environment near fire sources
④ Environment containing corrosive gases and flammable gases
⑤ Environment with splashing water and oil
⑥ Environment with strong vibration and impact
⑦ Environment containing organic solutions and salt
■XY-Axis stage maintenance
A uniform maintenance standard is not available, and the maintenance method is subject to the type of grease and operating environment. Based on the driving conditions and guide types, make sure to check the grease once a month.
■ About wiring
The motors and sensors of this product are wired externally with cables and connectors. If the cable on the XY-Axis stage side is frequently bent, it may cause the cable tie to break, and thus cause loosening of the motor terminal andsensor terminal, resulting in poor contact or core wire breakage. It is recommended to fix the connector on the XY-Axis stage side during wiring.
Drawings are for reference onlyApplication Industries of XY-Axis stage
| Electronics/home appliance | Automotive | Medical | ||
 |  |  | ||
| Smart phone | Semiconductor | Lithium battery | ||
 |  |  |
Related Products of XY-Axis stage
| Stepper Driver | High-precision X-Axis Automatic XY-Axis stage | Medium-precision X-Axis Automatic XY-Axis stage | ||
 |  |  | ||
| Typical model: C-DR42A | Typical model: XMSG413-LA24-C-N | Typical model: XMBS415-L-N |
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Table Length (mm) | Cable Length (m) | Cover Position |
|---|---|---|---|---|---|---|---|
18,042,553 VND | 1 Piece(s) | Available | 14 Day(s) | 40 | 2 | L | |
18,387,329 VND | 1 Piece(s) | Available | 14 Day(s) | 40 | 4 | L | |
18,042,553 VND | 1 Piece(s) | Available | 14 Day(s) | 40 | 2 | R | |
18,387,329 VND | 1 Piece(s) | Available | 14 Day(s) | 40 | 4 | R | |
18,042,553 VND | 1 Piece(s) | Available | 14 Day(s) | 60 | 2 | L | |
18,387,779 VND | 1 Piece(s) | Available | 14 Day(s) | 60 | 4 | L | |
18,042,553 VND | 1 Piece(s) | Available | 14 Day(s) | 60 | 2 | R | |
18,387,779 VND | 1 Piece(s) | Available | 14 Day(s) | 60 | 4 | R | |
24,430,163 VND | 1 Piece(s) | Available | 14 Day(s) | 100 | 2 | L | |
24,719,168 VND | 1 Piece(s) | Available | 14 Day(s) | 100 | 4 | L | |
24,430,163 VND | 1 Piece(s) | Available | 14 Day(s) | 100 | 2 | R | |
24,719,168 VND | 1 Piece(s) | Available | 14 Day(s) | 100 | 4 | R | |
28,999,079 VND | 1 Piece(s) | Available | 14 Day(s) | 80 | 2 | L | |
29,248,410 VND | 1 Piece(s) | Available | 14 Day(s) | 80 | 4 | L | |
28,999,079 VND | 1 Piece(s) | Available | 14 Day(s) | 80 | 2 | R | |
29,248,410 VND | 1 Piece(s) | Available | 14 Day(s) | 80 | 4 | R |
Loading...Tải…
The above figure shows the situation when cover L is selected. Please check the detailed dimensions by CAD data when selecting the cover R.
When the 820 cover in the above figure is L-shaped, the upper shaft is L-shaped and the lower shaft is R-shaped. When the 820 cover is R-shaped, the upper shaft is R-shaped and the lower shaft is L-shaped.
Motor side connector cable lengths vary by model and are subject to the actual products.
The purchased model already includes the positioning stage body, the corresponding driver and cable, so no need to purchase separately.
Dimensional Drawing
The above figure shows the situation when cover L is selected. Please check the detailed dimensions by CAD data when selecting the cover R.When the 820 cover in the above figure is L-shaped, the upper shaft is L-shaped and the lower shaft is R-shaped. When the 820 cover is R-shaped, the upper shaft is R-shaped and the lower shaft is L-shaped.Motor side connector cable lengths vary by model and are subject to the actual products.The purchased model already includes the positioning stage body, the corresponding driver and cable, so no need to purchase separately.Specification Table
■Specification Table
*1 The accuracy specification is the guaranteed value when the single-axis is set horizontally.
■ Universal Specifications
■Timing Diagram
t1＜0.1 us t2≥0.9 us t3≥10 us
t4: ENA (Enable Signal) t4 should be at least 10 μs ahead of DIR, and it is determined as high. Generally, ENA+ and ENA- are recommended to be suspended.
| Shape | Mechanical Specification | Accuracy Specification *1 | Sensor | ||||||||||||
| Positioning stage surface (mm) | Movement (mm) | Load Capacity (N) | Weight (kg) | Resolution (Pulse) | Maximum Speed | One-Way Positioning Accuracy | Repetitive Positioning Accuracy | Invalid Motion | Parallelism | Motion Straightness | Motion Parallelism | Limit Sensor | Origin Sensor (ORG1) | ||
| XY-Axis | 420 type | 40×40 | 18 | 94 | 0.8 | 5μm | 10 mm/sec | Within 20μm | Within ±5.0μm | 10μm | 30μm | 10μm | 20μm | Provided | Provided |
| 630 type | 60×60 | 28 | 92 | 1.2 | |||||||||||
| 650 type | 60×100 | 43 | 90 | 1.6 | |||||||||||
| 820 type | 80×80 | 20 | 109.0 | 1.6 | |||||||||||
■ Universal Specifications
| Feed Screw | Ball Screw Φ6, Lead 1mm | |
| Motor | Shape | 2-Phase Stepper Motor |
| Step Angle | 1.8° | |
| Driver | Power Voltage | DC15~32V |
| Output current | 0.1~2.2A | |
| Pulse Signal Voltage | 5~24V | |
| Subdivision | 200~20000 | |
| Connector | Part Number | HR10A-10J-12P (HIROSE) |
| Receiving Side Part Number | HR10A-10P-12S (HIROSE) | |
| Sensor Substrate | Power Voltage | DC15~32V |
| Sensor Type | Micro Optical Sensor EE-SX4320 (OMRON) | |
| Control Output | NPN Open Collector Output | |
| Output Logic | When detecting (shading): output transistor OFF (non-conductive) | |
■ Connector Pin Arrangement
■ Wiring Diagram
t1＜0.1 us t2≥0.9 us t3≥10 us
t4: ENA (Enable Signal) t4 should be at least 10 μs ahead of DIR, and it is determined as high. Generally, ENA+ and ENA- are recommended to be suspended.
Basic InformationThông tin cơ bản
| Resolution(µm) | 5 | Table Feeding Method | Ball Screw | Maximum Velocity(mm/sec) | 10 |
|---|---|---|---|---|---|
| Lead | 1 | Driver | A | Parallelism(μｍ) | 30 |
| Motion Parallelism(μｍ) | 20 | Motion Straightness(μｍ) | 10 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: Can MISUMI motorized positioning stage be used directly after the purchase? What other accessories are needed for the actual drive?
- Answer:Answer: In addition to purchasing MISUMI automatic positioning stage (including the motor driver and 2m cable), the customer also needs to prepare 24V power supply and control unit by himself.
- Question:Question: Why does my positioning stage only run in one direction?
-
Answer:Answer:
1. Maybe the directional signal is too weak, or the wiring is reversed, or the signal voltage is too high causing burnout of the internal current limiting resistor.
2. The pulse mode does not match. The signal mode must be consistent with the driver settings, otherwise the positioning stage will not rotate or will only run in one direction. - Question:Question: What is the accuracy of the stepper motor? Is it cumulative?
- Answer:Answer: Generally, the accuracy of the stepper motor is 3 to 5% of the step angle. The single step deviation of the stepper motor will not affect the accuracy of the next step, so the accuracy of the stepper motor is not accumulated.
- Question:Question: What is the allowable exterior temperature of the stepper motor?
- Answer:Answer: Too high temperature of the stepper motor will first demagnetize the magnetic material of the motor, resulting in torque decrease or even loss. Therefore, the maximum allowable temperature of the motor exterior should depend on the demagnetization point of different motor magnetic materials. Generally speaking, the demagnetization point of magnetic materials is above 130℃, so it is completely normal for the exterior temperature of the stepper motor to be around 80℃.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy