(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(649 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TTBN1000T10-150
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Belt Type

    • T10

    ClearTrống

  • Belt Width (mm)(mm)

    • 15
    • 20
    • 25
    • 30
    • 40
    • 50

    ClearTrống

  • Circumference Length(mm)

    • 320
    • 400
    • 440
    • 450
    • 480
    • 500
    • 510
    • 530
    • 560
    • 570
    • 600
    • 610
    • 630
    • 640
    • 650
    • 660
    • 680
    • 690
    • 700
    • 720
    • 750
    • 780
    • 810
    • 840
    • 850
    • 880
    • 910
    • 920
    • 960
    • 970
    • 980
    • 990
    • 1010
    • 1050
    • 1080
    • 1110
    • 1120
    • 1140
    • 1150
    • 1170
    • 1200
    • 1210
    • 1240
    • 1250
    • 1260
    • 1280
    • 1300
    • 1310
    • 1320
    • 1350
    • 1390
    • 1400
    • 1420
    • 1500
    • 1600
    • 1610
    • 1750
    • 1800
    • 1880
    • 1960
    • 2020
    • 3300
    • 3500

    ClearTrống

  • Number of Teeth

    • 32
    • 40
    • 44
    • 45
    • 48
    • 50
    • 51
    • 53
    • 56
    • 57
    • 60
    • 61
    • 63
    • 64
    • 65
    • 66
    • 68
    • 69
    • 70
    • 72
    • 75
    • 78
    • 81
    • 84
    • 85
    • 88
    • 91
    • 92
    • 96
    • 97
    • 98
    • 99
    • 101
    • 105
    • 108
    • 111
    • 112
    • 114
    • 115
    • 117
    • 120
    • 121
    • 124
    • 125
    • 126
    • 128
    • 130
    • 131
    • 132
    • 135
    • 139
    • 140
    • 142
    • 150
    • 160
    • 161
    • 175
    • 180
    • 188
    • 196
    • 202
    • 330
    • 350

    ClearTrống

  • type

    • C-TTBN□□T10

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 8 Day(s) or Less
    • 10 Day(s) or Less
    • 12 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts T10

Timing Belts T10
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :
649 Part Numbers Available

C-TTBN1000T10-150

C-TTBN1000T10-200

C-TTBN1000T10-250

C-TTBN1000T10-300

C-TTBN1000T10-400

C-TTBN1000T10-500

C-TTBN1010T10-150

C-TTBN1010T10-200

C-TTBN1010T10-250

C-TTBN1010T10-300

C-TTBN1010T10-400

C-TTBN1010T10-500

C-TTBN1040T10-150

C-TTBN1040T10-200

C-TTBN1040T10-250

C-TTBN1040T10-300

C-TTBN1040T10-400

C-TTBN1040T10-500

C-TTBN1050T10-150

C-TTBN1050T10-200

C-TTBN1000T10-150
C-TTBN1000T10-150

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      20,026VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

Timing Belts T10
It is a trapezoidal tooth profile timing belt. This belt always uses for regular torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: T10 (trapezoidal tooth profile)
• Tooth Pitch: 10 mm.
• Belt Width: 15, 25, 30, 40 and 50 mm.
• Circumference Length Shortest/Longest: 320 mm. and 3500 mm.
• Belt Operating Temperature Range: 0 to 80℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine
See more ...



Economy T10 Timing Belt

Enhanced LoadDurable ChloropreneTooth Height

- With increased belt width options and a wider range of lengths, our T10 belts are built to handle the heaviest loads and most challenging conditions.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in harsh environments.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from 0°C to 80°C, these belts offer versatility across various operating conditions.

- Featuring a taller tooth profile compared to standard timing belts, the T10 provides superior grip and power transmission, reducing the risk of slippage.

Economy T10 Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
 

Dimensional Drawing

Dimensional Drawing of MISUMI Economic Type Toothed Timing Belt

■Material/Specification Table
  Material
①BodyChloroprene
②Core WireGlass Fiber

Specifications Overview

TypesTooth pitchHhLUnit weight g/m
(Width: 10mm)
T10104.52.53.542
Operating Temperature 0 to 80℃
Belt circumference length is core wire length
MISUMI makes no commitment to this product brand
The model number on the back of the product is the supplier model.
For the transmission capacity and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Ordering Example of MISUMI (Economic Type) Toothed Timing Belt
 
TypesTooth pitchHhLUnit weight g/m
(Width: 10mm)
T10104.52.53.542

■ Type T10 (Tooth pitch: 10mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TTBN260T10150
(15mm)

200
(20mm)

250
(25mm)

300
(30mm)

400
(40mm)

500
(50mm)		26260
320T1032320
330T1033330
340T1034340
370T1037370
380T1038380
400T1040400
410T1041410
420T1042420
440T1044440
450T1045450
460T1046460
480T1048480
500T1050500
510T1051510
520T1052520
530T1053530
540T1054540
550T1055550
560T1056560
570T1057570
580T1058580
600T1060600
610T1061610
630T1063630
640T1064640
650T1065650
660T1066660
680T1068680
690T1069690
700T1070700
710T1071710
720T1072720
730T1073730
750T1075750
770T1077770
780T1078780
800T1080800
810T1081810
840T1084840
850T1085850
870T1087870
880T1088880
890T1089890
900T1090900
910T1091910
920T1092920
950T1095950
960T1096960
970T1097970
980T1098980
990T1099990
1000T101001000
1010T101011010
1040T101041040
1050T101051050
1080T101081080
1100T101101100
1110T101111110
1120T101121120
1140T101141140
1150T101151150
1170T101171170
1200T101201200
1210T101211210
1240T101241240
1250T101251250
1260T101261260
1280T101281280
1300T101301300
1310T101311310
1320T101321320
1350T101351350
1390T101391390
1400T101401400
1420T101421420
1440T101441440
1450T101451450
1460T101461460
1480T101481480
1500T101501500
1560T101561560
1580T101581580
1600T101601600
1610T101611610
1630T101631630
1640T101641640
1700T101701700
1750T101751750
1780T101781780
1800T101801800
1860T101861860
1880T101881880
1960T101961960
1980T101981980
2020T102022020
2100T102102100
2120T102122120
2200T102202200
2250T102252250
2300T102302300
2480T102482480
2500T102502500
2600T102602600
2800T102802800
2850T102852850
3000T103003000
3300T103303300
3460T103463460
3500T103503500
3700T103703700

Product Features

S type circular tooth profile economic type timing belt is made of rubber, featuring deviation prevention and wear resistance ■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt ■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -25 to 80℃.
Trapezoidal tooth profile timing belt is suitable for light load transmission and driving ■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right belt to replace.
④To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
110302717070 Water110302717070 Acid110302717070 Alkali110302717070 Oil110302717070 UV
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smartphone
110302717070 Lithium battery 110302717070 Semiconductor 110302717070 Smart phone
Automotive Electronic & Electrical Appliances Medical
110302717070 Automotive 110302717070 Electronic & electrical appliances 110302717070 Medical

Related Products

High Torque Timing Pulleys T5 Type Flat Belts For General Use (Economy Series) Toothed Timing Belt S2M S3M S5M S8M S14M Type
Economic type Toothed timing belt T5 T10 type Related products Economic type Toothed timing belt T5 T10 type Related products Economic type Toothed timing belt T5 T10 type Related products
Reference model: TTPA18T5100-A-NK10 Reference model: HBLT350-4.23 Reference model: C-HTBN400S2M-40
Reason for recommendation: short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance


Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. NextKế tiếp >>
Part Number
C-TTBN1000T10-150
C-TTBN1000T10-200
C-TTBN1000T10-250
C-TTBN1000T10-300
C-TTBN1000T10-400
C-TTBN1000T10-500
C-TTBN1010T10-150
C-TTBN1010T10-200
C-TTBN1010T10-250
C-TTBN1010T10-300
C-TTBN1010T10-400
C-TTBN1010T10-500
C-TTBN1040T10-150
C-TTBN1040T10-200
C-TTBN1040T10-250
C-TTBN1040T10-300
C-TTBN1040T10-400
C-TTBN1040T10-500
C-TTBN1050T10-150
C-TTBN1050T10-200
C-TTBN1050T10-250
C-TTBN1050T10-300
C-TTBN1050T10-400
C-TTBN1050T10-500
C-TTBN1080T10-150
C-TTBN1080T10-200
C-TTBN1080T10-250
C-TTBN1080T10-300
C-TTBN1080T10-400
C-TTBN1080T10-500
C-TTBN1100T10-150
C-TTBN1100T10-200
C-TTBN1100T10-250
C-TTBN1100T10-300
C-TTBN1100T10-400
C-TTBN1100T10-500
C-TTBN1110T10-150
C-TTBN1110T10-200
C-TTBN1110T10-250
C-TTBN1110T10-300
C-TTBN1110T10-400
C-TTBN1110T10-500
C-TTBN1120T10-150
C-TTBN1120T10-200
C-TTBN1120T10-250
C-TTBN1120T10-300
C-TTBN1120T10-400
C-TTBN1120T10-500
C-TTBN1140T10-150
C-TTBN1140T10-200
C-TTBN1140T10-250
C-TTBN1140T10-300
C-TTBN1140T10-400
C-TTBN1140T10-500
C-TTBN1150T10-150
C-TTBN1150T10-200
C-TTBN1150T10-250
C-TTBN1150T10-300
C-TTBN1150T10-400
C-TTBN1150T10-500
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngBelt Type Belt Width (mm)
(mm) 		Circumference Length
(mm) 		Number of Teeth

80,513 VND

1 Piece(s) Available 13 Day(s) T1015--

105,744 VND

1 Piece(s) Available 13 Day(s) T1020--

130,894 VND

1 Piece(s) Available 13 Day(s) T1025--

156,047 VND

1 Piece(s) Available 13 Day(s) T1030--

206,348 VND

1 Piece(s) Available 13 Day(s) T1040--

264,316 VND

1 Piece(s) Available 13 Day(s) T1050--

94,763 VND

4 Piece(s) Available 10 Day(s) T10151010101

125,545 VND

1 Piece(s) Available Same day T10201010101

156,322 VND

4 Piece(s) Available 10 Day(s) T10251010101

187,102 VND

4 Piece(s) Available 10 Day(s) T10301010101

248,662 VND

4 Piece(s) Available 10 Day(s) T10401010101

310,217 VND

4 Piece(s) Available 10 Day(s) T10501010101

83,595 VND

1 Piece(s) Available 13 Day(s) T1015--

109,776 VND

1 Piece(s) Available 13 Day(s) T1020--

135,878 VND

1 Piece(s) Available 13 Day(s) T1025--

162,057 VND

1 Piece(s) Available 13 Day(s) T1030--

214,416 VND

1 Piece(s) Available 13 Day(s) T1040--

274,362 VND

1 Piece(s) Available 13 Day(s) T1050--

98,419 VND

4 Piece(s) Available 10 Day(s) T10151050105

130,420 VND

4 Piece(s) Available 10 Day(s) T10201050105

162,419 VND

4 Piece(s) Available 10 Day(s) T10251050105

194,417 VND

4 Piece(s) Available 10 Day(s) T10301050105

258,410 VND

4 Piece(s) Available 10 Day(s) T10401050105

322,405 VND

1 Piece(s) Available Same day T10501050105

87,119 VND

1 Piece(s) Available Same day T10151080108

115,781 VND

4 Piece(s) Available 10 Day(s) T10201080108

143,154 VND

4 Piece(s) Available 10 Day(s) T10251080108

171,815 VND

4 Piece(s) Available 10 Day(s) T10301080108

227,237 VND

4 Piece(s) Available 10 Day(s) T10401080108

283,268 VND

4 Piece(s) Available 10 Day(s) T10501080108

88,104 VND

1 Piece(s) Available 13 Day(s) T1015--

115,786 VND

1 Piece(s) Available 13 Day(s) T1020--

143,468 VND

1 Piece(s) Available 13 Day(s) T1025--

171,153 VND

1 Piece(s) Available 13 Day(s) T1030--

226,516 VND

1 Piece(s) Available 13 Day(s) T1040--

289,469 VND

1 Piece(s) Available 13 Day(s) T1050--

108,403 VND

4 Piece(s) Available 8 Day(s) T10151110111

142,850 VND

4 Piece(s) Available 8 Day(s) T10201110111

177,375 VND

4 Piece(s) Available 8 Day(s) T10251110111

211,822 VND

4 Piece(s) Available 8 Day(s) T10301110111

288,197 VND

4 Piece(s) Available 8 Day(s) T10401110111

357,188 VND

4 Piece(s) Available 8 Day(s) T10501110111

109,344 VND

4 Piece(s) Available 8 Day(s) T10151120112

144,080 VND

4 Piece(s) Available 8 Day(s) T10201120112

178,928 VND

4 Piece(s) Available 8 Day(s) T10251120112

213,665 VND

4 Piece(s) Available 8 Day(s) T10301120112

290,673 VND

4 Piece(s) Available 8 Day(s) T10401120112

360,275 VND

4 Piece(s) Available 8 Day(s) T10501120112

111,204 VND

4 Piece(s) Available 8 Day(s) T10151140114

146,536 VND

4 Piece(s) Available 8 Day(s) T10201140114

182,018 VND

4 Piece(s) Available 8 Day(s) T10251140114

217,347 VND

4 Piece(s) Available 8 Day(s) T10301140114

295,604 VND

4 Piece(s) Available 8 Day(s) T10401140114

366,433 VND

4 Piece(s) Available 8 Day(s) T10501140114

107,563 VND

1 Piece(s) Available Same day T10151150115

142,610 VND

4 Piece(s) Available 10 Day(s) T10201150115

177,656 VND

4 Piece(s) Available 10 Day(s) T10251150115

212,698 VND

4 Piece(s) Available 10 Day(s) T10301150115

282,790 VND

4 Piece(s) Available 10 Day(s) T10401150115

352,881 VND

1 Piece(s) Available Same day T10501150115

Loading...Tải…

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Shape Closed End Belt Tooth Surface Standard (Single Sided) Belt Material Rubber Belt
Core Wire Material Glass Fiber Belt Shape Type Trapezoidal Tooth Profile Metric Type Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.