Product Overview
Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.
Dimensional Drawing
Specifications Overview
■Material/Specification Table
|
C-PTBN | Body | Chloroprene |
Toothed Face | Nylon canvas |
Core Wire | Glass Fiber |
|
P5M | 5 | 3.25 | 3.6 | 1.81 | 0.571 | 0.5 | 41 |
Operating Temperature -25 to 80℃
Belt circumference length is core wire length
MISUMI makes no commitment to this product brand
The model number on the back of the product is the supplier model.
Specification Table
■Specification Table
|
P5M | 5 | 3.25 | 3.6 | 1.81 | 0.571 | 0.5 | 41 |
■ Type P5M (Tooth pitch: 5mm)
|
|
C-PTBN | 400 P5M | 100 (10mm)
150 (15mm) | 80 | 400 |
425 P5M | 85 | 425 |
450 P5M | 90 | 450 |
475 P5M | 95 | 475 |
500 P5M | 100 | 500 |
520 P5M | 104 | 520 |
525 P5M | 105 | 525 |
550 P5M | 110 | 550 |
625 P5M | 125 | 625 |
635 P5M | 127 | 635 |
640 P5M | 128 | 640 |
645 P5M | 129 | 645 |
800 P5M | 160 | 800 |
830 P5M | 166 | 830 |
850 P5M | 170 | 850 |
860 P5M | 172 | 860 |
880 P5M | 176 | 880 |
950 P5M | 190 | 950 |
1000 P5M | 200 | 1000 |
2845 P5M | 569 | 2845 |
Product Features
| | ■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Reduce the noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃. |
| | ■ P type circular tooth profile rubber timing belt (P5M/P8M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -25 to 80℃. |
| | ■ Trapezoidal tooth profile rubber timing belt (MXL/XL/L/H/T5/T10) Feature 1: Suitable for light load transmission, standard torque driving. Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10) |
Example of Use
Usage Method Example Drawing | Instructions for use of timing wheel and timing belt |
| ①Driving (The driven wheel is driven by the driving wheel for transmission) |
| ②Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy) |
Usage Method Example Drawing | Instructions for use of timing wheel and timing belt |
| ③Conveyance (Plates are conveyed by two timing toothed belts) |
| ④Traction transmission (Workpieces are clamped and transmitted by the belt) |
Usage Method
■ Installation method for timing belt transmission |
① | Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down. |
② | Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device. |
③ | Choose the right belt to replace. |
④ | To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use. |
⑤ | Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced. |
⑥ | Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device. Asymmetry of the pulley is shown as follows: |
| |
⑦ | Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions. |
⑧ | Install a new belt on the pulley. Never pry or use too much force. |
⑨ | Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension. |
⑩ | Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened. |
⑪ | Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect. |
Precautions
①Do not bend the belt by force.
②Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.
Application Industries
Food | | Semiconductor | | Smart Phones |
| | | | |
Automotive | | Electronic & Electrical | | Medical |
| | | | |
Related Products
Part Number |
---|
C-PTBN520P5M-150
SALE |
Part Number | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Belt Width (mm) (mm) |
---|
|
63,451 VND
53,933 VND
|
4 Piece(s)
| Available |
8 Day(s)
| 15 |
Loading...Tải…
Basic InformationThông tin cơ bản
Please check the type/dimensions/specifications of the part C-PTBN520P5M-150 in the Toothed Timing Belts P5M series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần C-PTBN520P5M-150 trong chuỗi Toothed Timing Belts P5M.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy