Why is the order model of the timing belt inconsistent with the actual belt label and engraving?

Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.

The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?

The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to 【Main causes of premature breakage and corresponding countermeasures】 to troubleshoot the equipment in use.

Can alteration be made to the timing belt?

Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.

What kind of belt is better to use under conditions that require high cleanliness?

The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.

What are the two main types of timing belts according to their functions? What is the role?

Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

Which tooth type of the timing belt has the smallest clearance? What will it affect?

The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (ICT) 16/12/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

My Components Thêm v
Similar ProductsSản phẩm tương tự
Product Detail
CAD Data unavailable Dữ liệu CAD không khả dụng

ConfigureTạo

Part number has not been determine

(24 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-PTBN1000P5M-150

type Belt Width (mm) Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

type
- C-PTBN□□P5M
ClearTrống
Belt Width (mm)(mm)
10

15
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

8 Day(s) or Less

13 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Toothed Timing Belts P5M (Part Number)

Until 31/12/2024
Volume Discount

Check FAQ of this product (6 items)

Brand :

MiSUMi Economy

Part Number :

C-PTBN1000P5M-150 SALE

C-PTBN2845P5M-150 SALE

C-PTBN340P5M-150 SALE

C-PTBN375P5M-150 SALE

C-PTBN400P5M-150 SALE

C-PTBN425P5M-150 SALE

C-PTBN450P5M-150 SALE

C-PTBN475P5M-150 SALE

C-PTBN490P5M-150 SALE

C-PTBN500P5M-150 SALE

C-PTBN520P5M-150 SALE

C-PTBN525P5M-150 SALE

C-PTBN550P5M-150 SALE

C-PTBN565P5M-150 SALE

C-PTBN625P5M-150 SALE

C-PTBN635P5M-150 SALE

C-PTBN640P5M-150 SALE

C-PTBN645P5M-150 SALE

C-PTBN800P5M-150 SALE

C-PTBN830P5M-150 SALE

C-PTBN1000P5M-150

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Data unavailable

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

RoHS Compliant Product

Product Overview

Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

Specifications Overview

■Material/Specification Table

Type	Material
C－PTBN	Body	Chloroprene
	Toothed Face	Nylon canvas
	Core Wire	Glass Fiber

Type	Tooth Pitch	L	H	h	PLD	r	Unit weight g/m (Width: 10mm)
P5M	5	3.25	3.6	1.81	0.571	0.5	41

Operating Temperature -25 to 80℃

Belt circumference length is core wire length

MISUMI makes no commitment to this product brand

The model number on the back of the product is the supplier model.

Specification Table

■Specification Table
Ordering Example of MISUMI Economy Series Toothed Timing Belt P5M P8M

Type	Tooth Pitch	L	H	h	PLD	r	Unit weight g/m (Width: 10mm)
P5M	5	3.25	3.6	1.81	0.571	0.5	41

■ Type P5M (Tooth pitch: 5mm)

Part Number			Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Nominal Width	Number of Teeth	Belt Circumference Length (mm)
C－PTBN	400 P5M	100 (10mm) 150 (15mm)	80	400
	425 P5M		85	425
	450 P5M		90	450
	475 P5M		95	475
	500 P5M		100	500
	520 P5M		104	520
	525 P5M		105	525
	550 P5M		110	550
	625 P5M		125	625
	635 P5M		127	635
	640 P5M		128	640
	645 P5M		129	645
	800 P5M		160	800
	830 P5M		166	830
	850 P5M		170	850
	860 P5M		172	860
	880 P5M		176	880
	950 P5M		190	950
	1000 P5M		200	1000
	2845 P5M		569	2845

Product Features

		■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Reduce the noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃.
		■ P type circular tooth profile rubber timing belt (P5M/P8M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -25 to 80℃.
		■ Trapezoidal tooth profile rubber timing belt (MXL/XL/L/H/T5/T10) Feature 1: Suitable for light load transmission, standard torque driving. Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	①Driving (The driven wheel is driven by the driving wheel for transmission)
	②Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	③Conveyance (Plates are conveyed by two timing toothed belts)
	④Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①	Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②	Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③	Choose the right belt to replace.
④	To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤	Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥	Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device. Asymmetry of the pulley is shown as follows:

⑦	Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧	Install a new belt on the pulley. Never pry or use too much force.
⑨	Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩	Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪	Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

①Do not bend the belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

②Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.

③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food	Semiconductor	Smart Phones

Automotive	Electronic & Electrical	Medical

Part Number
C-PTBN1000P5M-150SALE
C-PTBN2845P5M-150SALE
C-PTBN340P5M-150SALE
C-PTBN375P5M-150SALE
C-PTBN400P5M-150SALE
C-PTBN425P5M-150SALE
C-PTBN450P5M-150SALE
C-PTBN475P5M-150SALE
C-PTBN490P5M-150SALE
C-PTBN500P5M-150SALE
C-PTBN520P5M-150SALE
C-PTBN525P5M-150SALE
C-PTBN550P5M-150SALE
C-PTBN565P5M-150SALE
C-PTBN625P5M-150SALE
C-PTBN635P5M-150SALE
C-PTBN640P5M-150SALE
C-PTBN645P5M-150SALE
C-PTBN800P5M-150SALE
C-PTBN830P5M-150SALE
C-PTBN850P5M-150SALE
C-PTBN860P5M-150SALE
C-PTBN880P5M-150SALE
C-PTBN950P5M-150SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Belt Width (mm) (mm)
119,726 VND 101,767 VND	4 Piece(s)	Available	8 Day(s)	15
279,180 VND 237,303 VND	4 Piece(s)	Available	8 Day(s)	15
38,109 VND 32,393 VND	1 Piece(s)	Available	13 Day(s)	15
38,111 VND 32,394 VND	1 Piece(s)	Available	13 Day(s)	15
41,371 VND 35,165 VND	4 Piece(s)	Available	8 Day(s)	15
43,846 VND 37,269 VND	4 Piece(s)	Available	8 Day(s)	15
46,261 VND 39,322 VND	4 Piece(s)	Available	8 Day(s)	15
48,660 VND 41,361 VND	4 Piece(s)	Available	8 Day(s)	15
47,678 VND 40,526 VND	1 Piece(s)	Available	13 Day(s)	15
51,153 VND 43,480 VND	4 Piece(s)	Available	8 Day(s)	15
63,451 VND 53,933 VND	4 Piece(s)	Available	8 Day(s)	15
64,065 VND 54,455 VND	4 Piece(s)	Available	8 Day(s)	15
67,018 VND 56,965 VND	4 Piece(s)	Available	8 Day(s)	15
57,168 VND 48,593 VND	1 Piece(s)	Available	13 Day(s)	15
75,763 VND 64,399 VND	4 Piece(s)	Available	8 Day(s)	15
76,934 VND 65,394 VND	4 Piece(s)	Available	8 Day(s)	15
64,751 VND 55,038 VND	4 Piece(s)	Available	8 Day(s)	15
78,102 VND 66,387 VND	4 Piece(s)	Available	8 Day(s)	15
96,307 VND 81,861 VND	4 Piece(s)	Available	8 Day(s)	15
99,797 VND 84,827 VND	4 Piece(s)	Available	8 Day(s)	15
102,119 VND 86,801 VND	4 Piece(s)	Available	8 Day(s)	15
103,345 VND 87,843 VND	4 Piece(s)	Available	8 Day(s)	15
105,648 VND 89,801 VND	4 Piece(s)	Available	8 Day(s)	15
113,896 VND 96,812 VND	4 Piece(s)	Available	8 Day(s)	15

Basic InformationThông tin cơ bản

Belt Type	P5M	Belt Shape	Closed End	Belt Material	Rubber Belt
Belt Tooth Surface	Standard (Single Sided)	Core Wire Material	Glass Core Wire	Belt Shape Type	Circular Tooth Profile PX Belt
Transmission Torque	High Torque Transmission

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?: Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?: Answer:Answer:
The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to 【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?: Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?: Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?: Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?: Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (3 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

High Torque Timing Pulleys S2M Type	Flat Belt	Timing Belts MXL

Representative model: HTPA48S2M040-B-N10	Representative model: HBLT350-4.23	Representative model: C-TBN236MXL025