(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(665 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN300H150
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Belt Width (mm)(mm)

    • 19.1
    • 25.4
    • 38.1
    • 50.8

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.75
    • 1
    • 1.5
    • 2

    ClearTrống

  • Circumference Length(mm)

    • 304.8
    • 368.3
    • 431.8
    • 469.9
    • 508
    • 533.4
    • 558.8
    • 571.5
    • 584.2
    • 596.9
    • 609.6
    • 622.3
    • 635
    • 647.7
    • 660.4
    • 685.8
    • 698.5
    • 711.2
    • 723.9
    • 736.6
    • 762
    • 787.4
    • 800.1
    • 812.8
    • 825.5
    • 838.2
    • 850.9
    • 863.6
    • 876.3
    • 889
    • 901.7
    • 914.4
    • 927.1
    • 939.8
    • 952.5
    • 965.2
    • 977.9
    • 990.6
    • 1003.30
    • 1016
    • 1028.7
    • 1041.4
    • 1054.1
    • 1066.8
    • 1079.5
    • 1092.2
    • 1104.9
    • 1117.6
    • 1130.3
    • 1143
    • 1168.4
    • 1181.1
    • 1193.8
    • 1206.5
    • 1219.2
    • 1231.9
    • 1244.6
    • 1257.30
    • 1270
    • 1295.4
    • 1308.1
    • 1320.80
    • 1333.5
    • 1346.2
    • 1371.6
    • 1384.3
    • 1397.00
    • 1422.4
    • 1435.10
    • 1447.8
    • 1473.2
    • 1485.9
    • 1498.6
    • 1524
    • 1536.7
    • 1549.40
    • 1562.1
    • 1574.8
    • 1587.5
    • 1600.2
    • 1625.6
    • 1638.3
    • 1651
    • 1663.7
    • 1676.4
    • 1701.8
    • 1727.2
    • 1752.6
    • 1778
    • 1803.40
    • 1828.8
    • 1841.5
    • 1854.2
    • 1879.6
    • 1905
    • 1930.4
    • 1955.8
    • 1981.2
    • 2006.6
    • 2032
    • 2057.4
    • 2082.8
    • 2108.2
    • 2133.6
    • 2159
    • 2184.4
    • 2209.8
    • 2235.2
    • 2260.6
    • 2286
    • 2311.4
    • 2336.8
    • 2362.2
    • 2387.6
    • 2413
    • 2438.4
    • 2489.20
    • 2501.9
    • 2540
    • 2590.8
    • 2603.5
    • 2667.00
    • 2743.2
    • 2794
    • 2844.8
    • 2870.2
    • 2882.9
    • 2895.60
    • 2921.00
    • 2946.4
    • 2997.2
    • 3048
    • 3149.6
    • 3175
    • 3200.40
    • 3225.8
    • 3302
    • 3365.5
    • 3429
    • 3556
    • 3657.60
    • 3683
    • 3810
    • 3835.40
    • 3860.8
    • 3937
    • 3962.4
    • 4064
    • 4191
    • 4267.2
    • 4318
    • 4445
    • 4572
    • 4699.00
    • 4826
    • 5334.0

    ClearTrống

  • Number of Teeth

    • 24
    • 29
    • 34
    • 37
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 54
    • 55
    • 56
    • 57
    • 58
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 102
    • 103
    • 104
    • 105
    • 106
    • 108
    • 109
    • 110
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 120
    • 121
    • 122
    • 123
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 136
    • 138
    • 140
    • 142
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 154
    • 156
    • 158
    • 160
    • 162
    • 164
    • 166
    • 168
    • 170
    • 172
    • 174
    • 176
    • 178
    • 180
    • 182
    • 184
    • 186
    • 188
    • 190
    • 192
    • 196
    • 197
    • 200
    • 204
    • 205
    • 210
    • 216
    • 220
    • 224
    • 226
    • 227
    • 228
    • 230
    • 232
    • 236
    • 240
    • 248
    • 250
    • 252
    • 254
    • 260
    • 265
    • 270
    • 280
    • 288
    • 290
    • 300
    • 302
    • 304
    • 310
    • 312
    • 320
    • 330
    • 336
    • 340
    • 350
    • 360
    • 370
    • 380
    • 420

    ClearTrống

  • type

    • C-TBN□□□H

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts H (Part Number)

Timing Belts H
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
665 Part Numbers Available

C-TBN300H150 SALE

C-TBN300H200 SALE

C-TBN305H075 SALE

C-TBN305H100 SALE

C-TBN305H150 SALE

C-TBN305H200 SALE

C-TBN310H075 SALE

C-TBN310H100 SALE

C-TBN310H150 SALE

C-TBN310H200 SALE

C-TBN315H075 SALE

C-TBN315H100 SALE

C-TBN315H150 SALE

C-TBN315H200 SALE

C-TBN320H075 SALE

C-TBN320H100 SALE

C-TBN320H150 SALE

C-TBN320H200 SALE

C-TBN325H075 SALE

C-TBN325H100 SALE

C-TBN300H150
C-TBN300H150

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      20,021VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

RoHS Compliant Product



Economy H-Type Timing Belt

Quiet OperationCustomizableChloroprene Material

- With a wide range of belt lengths and widths, you can tailor the belt to perfectly match your specific equipment needs.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

Economy H-Type Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber
Specifications Overview
TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
H12.740°6.122.294.31140
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The belt circumference length of H (inch size) is the belt number.
timing beltTiming belt circumference length is core wire length.
timing beltC-TBN timing belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
 
Specification Table
■ Specification Table
Please order after selecting part number and parameters according to the selection steps to .
Ordering Example Part Number (TypeBelt Number Nominal Belt Width)
 C-TBN515H075

■ C-TBN
Tooth profile H (Pitch: 12.7mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TBN60H75
(19.1mm)

100
(25.4mm)

150
(38.1mm)

200
(50.8mm)		12152.40
120H24304.80
145H29368.30
170H34431.80
185H37469.90
200H40508.00
205H41520.70
210H42533.40
220H44558.80
225H45571.50
230H46584.20
235H47596.90
240H48609.60
245H49622.30
250H50635.00
255H51647.70
260H52660.40
270H54685.80
275H55698.50
280H56711.20
285H57723.90
290H58736.60
300H60762.00
305H61774.70
310H62787.40
315H63800.10
320H64812.80
325H65825.50
330H66838.20
335H67850.90
340H68863.60
345H69876.30
350H70889.00
355H71901.70
360H72914.40
365H73927.10
370H74939.80
375H75952.50
380H76965.20
385H77977.90
390H78990.60
395H791003.30
400H801016.00
405H811028.70
410H821041.40
415H831054.10
420H841066.80
425H851079.50
430H861092.20
435H871104.90
440H881117.60
445H891130.30
450H901143.00
460H921168.40
465H931181.10
470H941193.80
475H951206.50
480H961219.20
485H971231.90
490H981244.60
495H991257.30
500H1001270.00
510H1021295.40
515H1031308.10
520H1041320.80
525H1051333.50
530H1061346.20
540H1081371.60
545H1091384.30
550H1101397.00
555H1111409.70
560H1121422.40
565H1131435.10
570H1141447.80
580H1161473.20
585H1171485.90
590H1181498.60
600H1201524.00
605H1211536.70
610H1221549.40
615H1231562.10
620H1241574.80
625H1251587.50
630H1261600.20
640H1281625.60
645H1291638.30
650H1301651.00
660H1321676.40
670H1341701.80
680H1361727.20
690H1381752.60
700H1401778.00
710H1421803.40
720H1441828.80
725H1451841.50
730H1461854.20
740H1481879.60
750H1501905.00
760H1521930.40
770H1541955.80
780H1561981.20
785H1571993.90
790H1582006.60
800H1602032.00
810H1622057.40
820H1642082.80
830H1662108.20
840H1682133.60
850H1702159.00
860H1722184.40
870H1742209.80
880H1762235.20
900H1802286.00
910H1822311.40
920H1842336.80
930H1862362.20
940H1882387.60
950H1902413.00
960H1922438.40
980H1962489.20
985H1972501.90
1000H2002540.00
1020H2042590.80
1050H2102667.00
1070H2142717.80
1080H2162743.20
1100H2202794.00
1120H2242844.80
1130H2262870.20
1135H2272882.90
1140H2282895.60
1150H2302921.00
1160H2322946.40
1180H2362997.20
1200H2403048.00
1240H2483149.60
1250H2503175.00
1260H2523200.40
1270H2543225.80
1285H2573263.90
1300H2603302.00
1325H2653365.50
1350H2703429.00
1360H2723454.40
1400H2803556.00
1440H2883657.60
1450H2903683.00
1460H2923708.40
1500H3003810.00
1510H3023835.40
1550H3103937.00
1560H3123962.40
1600H3204064.00
1630H3264140.20
1650H3304191.00
1680H3364267.20
1700H3404318.00
1750H3504445.00
1780H3564521.20
1800H3604572.00
1850H3704699.00
1900H3804826.00
1950H3904953.00
2100H4205334.00

Product Features

S type circular tooth profile economy series timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: timing belt Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The timing belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right timing belt to replace.
④To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new timing belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the timing belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please timing belt avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Belt Pulleys S2M Type Flat Timing Belt For General Use Economy Series Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economy series Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
60
90
  1. << PrevTrước
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. NextKế tiếp >>
Part Number
C-TBN300H150SALE
C-TBN300H200SALE
C-TBN305H075SALE
C-TBN305H100SALE
C-TBN305H150SALE
C-TBN305H200SALE
C-TBN310H075SALE
C-TBN310H100SALE
C-TBN310H150SALE
C-TBN310H200SALE
C-TBN315H075SALE
C-TBN315H100SALE
C-TBN315H150SALE
C-TBN315H200SALE
C-TBN320H075SALE
C-TBN320H100SALE
C-TBN320H150SALE
C-TBN320H200SALE
C-TBN325H075SALE
C-TBN325H100SALE
C-TBN325H150SALE
C-TBN325H200SALE
C-TBN330H075SALE
C-TBN330H100SALE
C-TBN330H150SALE
C-TBN330H200SALE
C-TBN335H075SALE
C-TBN335H100SALE
C-TBN335H150SALE
C-TBN335H200SALE
C-TBN340H075SALE
C-TBN340H100SALE
C-TBN340H150SALE
C-TBN340H200SALE
C-TBN345H075SALE
C-TBN345H100SALE
C-TBN345H150SALE
C-TBN345H200SALE
C-TBN350H075SALE
C-TBN350H100SALE
C-TBN350H150SALE
C-TBN350H200SALE
C-TBN355H075SALE
C-TBN355H100SALE
C-TBN355H150SALE
C-TBN355H200SALE
C-TBN360H075SALE
C-TBN360H100SALE
C-TBN360H150SALE
C-TBN360H200SALE
C-TBN365H075SALE
C-TBN365H100SALE
C-TBN365H150SALE
C-TBN365H200SALE
C-TBN370H075SALE
C-TBN370H100SALE
C-TBN370H150SALE
C-TBN370H200SALE
C-TBN375H075SALE
C-TBN375H100SALE
C-TBN375H150SALE
C-TBN375H200SALE
C-TBN380H075SALE
C-TBN380H100SALE
C-TBN380H150SALE
C-TBN380H200SALE
C-TBN385H075SALE
C-TBN385H100SALE
C-TBN385H150SALE
C-TBN385H200SALE
C-TBN390H075SALE
C-TBN390H100SALE
C-TBN390H150SALE
C-TBN390H200SALE
C-TBN395H075SALE
C-TBN395H100SALE
C-TBN395H150SALE
C-TBN395H200SALE
C-TBN400H075SALE
C-TBN400H100SALE
C-TBN400H150SALE
C-TBN400H200SALE
C-TBN405H075SALE
C-TBN405H100SALE
C-TBN405H150SALE
C-TBN405H200SALE
C-TBN410H075SALE
C-TBN410H100SALE
C-TBN410H150SALE
C-TBN410H200SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngBelt Width (mm)
(mm) 		Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

155,100 VND

131,835 VND

4 Piece(s) Available 8 Day(s) 38.11.576260

204,507 VND

173,831 VND

4 Piece(s) Available 8 Day(s) 50.8276260

59,962 VND

50,968 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

78,077 VND

66,365 VND

1 Piece(s) Available 13 Day(s) 25.41--

114,628 VND

97,434 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

151,178 VND

128,501 VND

1 Piece(s) Available 13 Day(s) 50.82--

83,691 VND

71,137 VND

4 Piece(s) Available 8 Day(s) 19.10.75787.462

109,049 VND

92,692 VND

4 Piece(s) Available 8 Day(s) 25.41787.462

160,045 VND

136,038 VND

4 Piece(s) Available 8 Day(s) 38.11.5787.462

211,112 VND

179,445 VND

4 Piece(s) Available 8 Day(s) 50.82787.462

84,928 VND

72,189 VND

4 Piece(s) Available 8 Day(s) 19.10.75800.163

110,639 VND

94,043 VND

4 Piece(s) Available 8 Day(s) 25.41800.163

162,517 VND

138,139 VND

1 Piece(s) Available Same day 38.11.5800.163

214,398 VND

182,238 VND

4 Piece(s) Available 8 Day(s) 50.82800.163

86,163 VND

73,239 VND

4 Piece(s) Available 8 Day(s) 19.10.75812.864

112,335 VND

95,485 VND

4 Piece(s) Available 8 Day(s) 25.41812.864

164,989 VND

140,241 VND

4 Piece(s) Available 8 Day(s) 38.11.5812.864

217,718 VND

185,060 VND

4 Piece(s) Available 8 Day(s) 50.82812.864

65,383 VND

55,576 VND

4 Piece(s) Available 8 Day(s) 19.10.75825.565

84,636 VND

71,941 VND

4 Piece(s) Available 8 Day(s) 25.41825.565

123,498 VND

104,973 VND

4 Piece(s) Available 8 Day(s) 38.11.5825.565

162,357 VND

138,003 VND

4 Piece(s) Available 8 Day(s) 50.82825.565

88,638 VND

75,342 VND

4 Piece(s) Available 8 Day(s) 19.10.75838.266

115,582 VND

98,245 VND

1 Piece(s) Available Same day 25.41838.266

169,935 VND

144,445 VND

4 Piece(s) Available 8 Day(s) 38.11.5838.266

224,249 VND

190,612 VND

4 Piece(s) Available 8 Day(s) 50.82838.266

80,416 VND

68,354 VND

4 Piece(s) Available 8 Day(s) 19.10.75850.967

104,894 VND

89,160 VND

4 Piece(s) Available 8 Day(s) 25.41850.967

153,917 VND

130,829 VND

4 Piece(s) Available 8 Day(s) 38.11.5850.967

202,905 VND

172,469 VND

4 Piece(s) Available 8 Day(s) 50.82850.967

91,109 VND

77,443 VND

4 Piece(s) Available 8 Day(s) 19.10.75863.668

118,940 VND

101,099 VND

4 Piece(s) Available 8 Day(s) 25.41863.668

174,878 VND

148,646 VND

4 Piece(s) Available 8 Day(s) 38.11.5863.668

230,853 VND

196,225 VND

4 Piece(s) Available 8 Day(s) 50.82863.668

92,344 VND

78,492 VND

4 Piece(s) Available 8 Day(s) 19.10.75876.369

120,527 VND

102,448 VND

4 Piece(s) Available 8 Day(s) 25.41876.369

177,351 VND

150,748 VND

4 Piece(s) Available 8 Day(s) 38.11.5876.369

234,137 VND

199,016 VND

4 Piece(s) Available 8 Day(s) 50.82876.369

93,581 VND

79,544 VND

4 Piece(s) Available 8 Day(s) 19.10.7588970

122,187 VND

103,859 VND

4 Piece(s) Available 8 Day(s) 25.4188970

179,787 VND

152,819 VND

4 Piece(s) Available 8 Day(s) 38.11.588970

237,494 VND

201,870 VND

4 Piece(s) Available 8 Day(s) 50.8288970

72,941 VND

62,000 VND

4 Piece(s) Available 8 Day(s) 19.10.75901.771

94,667 VND

80,467 VND

4 Piece(s) Available 8 Day(s) 25.41901.771

138,506 VND

117,730 VND

4 Piece(s) Available 8 Day(s) 38.11.5901.771

182,452 VND

155,084 VND

4 Piece(s) Available 8 Day(s) 50.82901.771

96,054 VND

81,646 VND

4 Piece(s) Available 8 Day(s) 19.10.75914.472

125,472 VND

106,651 VND

4 Piece(s) Available 8 Day(s) 25.41914.472

184,729 VND

157,020 VND

4 Piece(s) Available 8 Day(s) 38.11.5914.472

244,027 VND

207,423 VND

4 Piece(s) Available 8 Day(s) 50.82914.472

72,589 VND

61,701 VND

4 Piece(s) Available 8 Day(s) 19.10.75927.173

94,174 VND

80,048 VND

4 Piece(s) Available 8 Day(s) 25.41927.173

137,804 VND

117,133 VND

4 Piece(s) Available 8 Day(s) 38.11.5927.173

181,434 VND

154,219 VND

4 Piece(s) Available 8 Day(s) 50.82927.173

98,526 VND

83,747 VND

4 Piece(s) Available 8 Day(s) 19.10.75939.874

128,790 VND

109,472 VND

4 Piece(s) Available 8 Day(s) 25.41939.874

189,676 VND

161,225 VND

4 Piece(s) Available 8 Day(s) 38.11.5939.874

250,631 VND

213,036 VND

4 Piece(s) Available 8 Day(s) 50.82939.874

99,761 VND

84,797 VND

4 Piece(s) Available 8 Day(s) 19.10.75952.575

130,416 VND

110,854 VND

4 Piece(s) Available 8 Day(s) 25.41952.575

192,149 VND

163,327 VND

4 Piece(s) Available 8 Day(s) 38.11.5952.575

253,987 VND

215,889 VND

4 Piece(s) Available 8 Day(s) 50.82952.575

75,241 VND

63,955 VND

4 Piece(s) Available 8 Day(s) 19.10.75965.276

97,778 VND

83,111 VND

4 Piece(s) Available 8 Day(s) 25.41965.276

143,245 VND

121,758 VND

4 Piece(s) Available 8 Day(s) 38.11.5965.276

188,641 VND

160,345 VND

4 Piece(s) Available 8 Day(s) 50.82965.276

76,194 VND

64,765 VND

4 Piece(s) Available 8 Day(s) 19.10.75977.977

98,945 VND

84,103 VND

4 Piece(s) Available 8 Day(s) 25.41977.977

145,011 VND

123,259 VND

4 Piece(s) Available 8 Day(s) 38.11.5977.977

191,008 VND

162,357 VND

4 Piece(s) Available 8 Day(s) 50.82977.977

103,468 VND

87,948 VND

4 Piece(s) Available 8 Day(s) 19.10.75990.678

135,359 VND

115,055 VND

4 Piece(s) Available 8 Day(s) 25.41990.678

199,564 VND

169,629 VND

1 Piece(s) Available Same day 38.11.5990.678

263,838 VND

224,262 VND

4 Piece(s) Available 8 Day(s) 50.82990.678

104,705 VND

88,999 VND

4 Piece(s) Available 8 Day(s) 19.10.751003.3079

137,019 VND

116,466 VND

4 Piece(s) Available 8 Day(s) 25.411003.3079

202,035 VND

171,730 VND

4 Piece(s) Available 8 Day(s) 38.11.51003.3079

267,124 VND

227,055 VND

4 Piece(s) Available 8 Day(s) 50.821003.3079

105,942 VND

90,051 VND

4 Piece(s) Available 8 Day(s) 19.10.75101680

138,680 VND

117,878 VND

4 Piece(s) Available 8 Day(s) 25.41101680

204,507 VND

173,831 VND

4 Piece(s) Available 8 Day(s) 38.11.5101680

270,372 VND

229,816 VND

4 Piece(s) Available 8 Day(s) 50.82101680

79,797 VND

67,827 VND

4 Piece(s) Available 8 Day(s) 19.10.751028.781

103,782 VND

88,215 VND

4 Piece(s) Available 8 Day(s) 25.411028.781

152,219 VND

129,386 VND

4 Piece(s) Available 8 Day(s) 38.11.51028.781

200,617 VND

170,524 VND

4 Piece(s) Available 8 Day(s) 50.821028.781

108,483 VND

92,211 VND

4 Piece(s) Available 8 Day(s) 19.10.751041.482

141,964 VND

120,669 VND

4 Piece(s) Available 8 Day(s) 25.411041.482

209,455 VND

178,037 VND

4 Piece(s) Available 8 Day(s) 38.11.51041.482

277,011 VND

235,459 VND

4 Piece(s) Available 8 Day(s) 50.821041.482

Loading...Tải…

  1. << PrevTrước
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Type H Belt Shape Closed End Belt Material Rubber Belt
Belt Tooth Surface Standard (Single Sided) Core Wire Material Glass Fiber Belt Shape Type Trapezoidal Tooth Profile Circular Type
Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.