(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(909 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN239MXL037
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Core Wire Material

    • Glass Fiber
      • Glass Core Wire
      • Glass Fiber

    ClearTrống

  • Belt Width (mm)(mm)

    • 4.8
    • 6.4
    • 9.5
    • 12.7

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.19
    • 0.25
    • 0.37
    • 0.5

    ClearTrống

  • Circumference Length(mm)

    • 81.28
    • 85.344
    • 87.376
    • 91.44
    • 93.472
    • 95.504
    • 97.54
    • 99.568
    • 101.6
    • 105.66
    • 107.7
    • 109.73
    • 111.76
    • 113.79
    • 115.82
    • 117.86
    • 119.89
    • 121.92
    • 123.95
    • 125.98
    • 128.02
    • 132.08
    • 134.11
    • 136.14
    • 138.18
    • 140.21
    • 142.24
    • 144.27
    • 146.30
    • 148.34
    • 152.4
    • 154.43
    • 156.46
    • 158.5
    • 160.53
    • 162.56
    • 164.592
    • 166.62
    • 168.66
    • 170.69
    • 172.72
    • 174.75
    • 176.78
    • 178.82
    • 180.85
    • 182.88
    • 184.91
    • 186.94
    • 188.98
    • 191.01
    • 193.04
    • 195.07
    • 197.1
    • 199.14
    • 201.17
    • 203.2
    • 205.23
    • 207.26
    • 209.3
    • 211.33
    • 213.36
    • 215.39
    • 217.42
    • 219.46
    • 221.49
    • 223.52
    • 225.55
    • 227.58
    • 229.62
    • 231.65
    • 233.68
    • 235.712
    • 239.78
    • 241.81
    • 243.84
    • 245.87
    • 247.90
    • 249.94
    • 251.968
    • 254
    • 256.03
    • 258.06
    • 260.1
    • 264.16
    • 266.19
    • 268.22
    • 270.26
    • 272.29
    • 274.32
    • 276.35
    • 280.42
    • 282.45
    • 284.48
    • 288.54
    • 292.61
    • 294.64
    • 296.67
    • 298.704
    • 300.74
    • 302.768
    • 304.8
    • 306.83
    • 308.864
    • 310.9
    • 312.928
    • 314.96
    • 316.992
    • 319.02
    • 321.06
    • 323.09
    • 325.12
    • 327.15
    • 329.18
    • 335.28
    • 343.41
    • 345.44
    • 347.472
    • 355.6
    • 365.76
    • 373.89
    • 375.92
    • 377.952
    • 379.984
    • 384.05
    • 386.08
    • 390.14
    • 394.21
    • 396.24
    • 406.4
    • 412.496
    • 426.72
    • 430.78
    • 436.88
    • 438.91
    • 442.98
    • 445.01
    • 449.07
    • 455.17
    • 457.2
    • 463.30
    • 465.33
    • 471.42
    • 475.488
    • 477.52
    • 479.55
    • 485.65
    • 487.68
    • 493.776
    • 497.84
    • 508
    • 520.19
    • 528.32
    • 532.38
    • 538.48
    • 558.8
    • 560.832
    • 568.96
    • 577.09
    • 579.12
    • 585.22
    • 589.28
    • 603.5
    • 605.536
    • 609.6
    • 629.92
    • 633.98
    • 646.18
    • 650.24
    • 654.3
    • 656.336
    • 662.432
    • 666.496
    • 674.62
    • 676.656
    • 688.848
    • 703.07
    • 705.10
    • 711.2
    • 731.52
    • 737.62
    • 753.872
    • 768.1
    • 772.16
    • 784.352
    • 792.48
    • 812.8
    • 829.056
    • 833.12
    • 837.184
    • 839.216
    • 873.76
    • 890.02
    • 894.08
    • 920.5
    • 950.976
    • 961.136
    • 979.424
    • 1016
    • 1024.128
    • 1046.48
    • 1060.7
    • 1081.024
    • 1091.184
    • 1099.312
    • 1158.24
    • 1296.416
    • 1316.736
    • 1432.56
    • 1524
    • 1544.32
    • 1940.56
    • 2056.38
    • 2058.42
    • 2153.92
    • 2210.816
    • 2310.38
    • 2312.42
    • 2540
    • 2897.632
    • 2972.82
    • 3080.512
    • 3088.64
    • 4153.408

    ClearTrống

  • Number of Teeth

    • 40
    • 42
    • 43
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 103
    • 104
    • 105
    • 106
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 116
    • 118
    • 119
    • 120
    • 121
    • 122
    • 123
    • 124
    • 125
    • 126
    • 127
    • 128
    • 130
    • 131
    • 132
    • 133
    • 134
    • 135
    • 136
    • 138
    • 139
    • 140
    • 142
    • 144
    • 145
    • 146
    • 147
    • 148
    • 149
    • 150
    • 151
    • 152
    • 153
    • 154
    • 155
    • 156
    • 157
    • 158
    • 159
    • 160
    • 161
    • 162
    • 165
    • 169
    • 170
    • 171
    • 175
    • 180
    • 184
    • 185
    • 186
    • 187
    • 189
    • 190
    • 192
    • 194
    • 195
    • 200
    • 203
    • 210
    • 212
    • 215
    • 216
    • 218
    • 219
    • 221
    • 224
    • 225
    • 228
    • 229
    • 232
    • 234
    • 235
    • 236
    • 239
    • 240
    • 243
    • 245
    • 250
    • 256
    • 260
    • 262
    • 265
    • 275
    • 276
    • 280
    • 284
    • 285
    • 288
    • 290
    • 297
    • 298
    • 300
    • 310
    • 312
    • 318
    • 320
    • 322
    • 323
    • 326
    • 328
    • 332
    • 333
    • 339
    • 346
    • 347
    • 350
    • 360
    • 363
    • 371
    • 378
    • 380
    • 386
    • 390
    • 400
    • 408
    • 410
    • 412
    • 413
    • 430
    • 438
    • 440
    • 453
    • 468
    • 473
    • 482
    • 500
    • 504
    • 515
    • 522
    • 532
    • 537
    • 541
    • 570
    • 638
    • 648
    • 705
    • 750
    • 760
    • 955
    • 1012
    • 1013
    • 1060
    • 1088
    • 1137
    • 1138
    • 1250
    • 1426
    • 1463
    • 1516
    • 1520
    • 2044

    ClearTrống

  • type

    • C-TBN□□□MXL

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 6 Day(s) or Less
    • 8 Day(s) or Less
    • 10 Day(s) or Less
    • 12 Day(s) or Less
    • 13 Day(s) or Less
    • 14 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts MXL (Part Number)

Timing Belts MXL
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
909 Part Numbers Available

C-TBN239MXL037 SALE

C-TBN239MXL050 SALE

C-TBN240MXL019 SALE

C-TBN240MXL025 SALE

C-TBN240MXL037 SALE

C-TBN240MXL050 SALE

C-TBN243MXL019 SALE

C-TBN243MXL025 SALE

C-TBN243MXL037 SALE

C-TBN243MXL050 SALE

C-TBN245MXL019 SALE

C-TBN245MXL025 SALE

C-TBN245MXL037 SALE

C-TBN245MXL050 SALE

C-TBN250MXL019 SALE

C-TBN250MXL025 SALE

C-TBN250MXL037 SALE

C-TBN250MXL050 SALE

C-TBN256MXL019 SALE

C-TBN256MXL025 SALE

C-TBN239MXL037
C-TBN239MXL037

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      3,241VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

Timing Belts MXL
It is a trapezoidal tooth profile timing belt. This belt always uses for regular torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: MXL (trapezoidal tooth profile)
• Tooth Pitch: 2.032 mm.
• Belt Width: 4.8, 6.4, 9.5 and 12.7 mm.
• Circumference Length Shortest/Longest: 91.44 mm. and 2972.82 mm.
• Belt Operating Temperature Range: -30 to 90℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
Tooth surface protection layer: Nylon canvas
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine
See more ...



Economy Timing Belt - Chloroprene

Chloroprene MaterialGlass FiberTemperature Range

- Customizable Length and Width: Choose from a wide range of belt lengths and widths to perfectly match your equipment requirements.

- Durable Chloroprene Material: Offers excellent resistance to abrasion, oil, and grease, ensuring long-lasting performance.

- Glass Fiber Reinforced Core: Provides exceptional strength and tensile strength, preventing belt elongation and slippage.

- Precise Trapezoidal Tooth Profile: Ensures smooth and efficient power transmission with minimal noise and vibration.

- Wide Operating Temperature Range: Functions reliably in temperatures from -30°C to 90°C, expanding application possibilities.

Economy Timing Belt - Chloroprene
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belt.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber

Specifications Overview

TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
MXL2.03240°1.140.511.220.130.1311
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The number of belt teeth for MXL is the belt number.
timing beltCircumference length is core wire length.
timing beltC-TBN belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the timing belt product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Please order after selecting part number and parameters according to the selection steps timing belt to timing belt.
Ordering Example Part Number (timing beltTypetiming beltBelt Number timing beltNominal Belt Width)
 C－TBN236MXL025

■ C-TBN
Tooth profile MXL (Tooth pitch: 2.032mm) 
Part Numbertiming beltBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
timing beltTypetiming beltBelt Number
C-TBN40MXL019
(4.8mm)

025
(6.4mm)

037
(9.5mm)

050
(12.7mm)		4081.28
42MXL4285.34
43MXL4387.38
45MXL4591.44
46MXL4693.47
47MXL4795.50
48MXL4897.54
49MXL4999.57
50MXL50101.60
52MXL52105.66
53MXL53107.70
54MXL54109.73
55MXL55111.76
56MXL56113.79
57MXL57115.82
58MXL58117.86
59MXL59119.89
60MXL60121.92
61MXL61123.95
62MXL62125.98
63MXL63128.02
65MXL65132.08
66MXL66134.11
67MXL67136.14
68MXL68138.18
69MXL69140.21
70MXL70142.24
71MXL71144.27
72MXL72146.30
73MXL73148.34
75MXL75152.40
76MXL76154.43
77MXL77156.46
78MXL78158.50
79MXL79160.53
80MXL80162.56
81MXL81164.59
82MXL82166.62
83MXL83168.66
84MXL84170.69
85MXL85172.72
86MXL86174.75
87MXL87176.78
88MXL88178.82
89MXL89180.85
90MXL90182.88
91MXL91184.91
92MXL92186.94
93MXL93188.98
94MXL94191.01
95MXL95193.04
96MXL96195.07
97MXL97197.10
98MXL98199.14
99MXL99201.17
100MXL100203.20
101MXL101205.23
102MXL102207.26
103MXL103209.30
104MXL104211.33
105MXL105213.36
106MXL106215.39
107MXL107217.42
108MXL108219.46
109MXL109221.49
110MXL110223.52
111MXL111225.55
112MXL112227.58
113MXL113229.62
114MXL114231.65
115MXL115233.68
116MXL116235.71
118MXL118239.78
119MXL119241.81
120MXL120243.84
121MXL121245.87
122MXL122247.90
123MXL123249.94
124MXL124251.97
125MXL125254.00
126MXL126256.03
127MXL127258.06
128MXL128260.10
130MXL130264.16
131MXL131266.19
132MXL132268.22
133MXL133270.26
134MXL134272.29
135MXL135274.32
136MXL136276.35
138MXL138280.42
139MXL139282.45
140MXL140284.48
142MXL142288.54
144MXL144292.61
145MXL145294.64
146MXL146296.67
147MXL147298.70
148MXL148300.74
149MXL149302.77
150MXL150304.80
151MXL151306.83
152MXL152308.86
153MXL153310.90
154MXL154312.93
155MXL155314.96
156MXL156316.99
157MXL157319.02
158MXL158321.06
159MXL159323.09
160MXL160325.12
161MXL161327.15
162MXL162329.18
165MXL165335.28
169MXL169343.41
170MXL170345.44
171MXL171347.47
175MXL175355.60
180MXL180365.76
184MXL184373.89
185MXL185375.92
186MXL186377.95
187MXL187379.98
189MXL189384.05
190MXL190386.08
192MXL192390.14
194MXL194394.21
195MXL195396.24
200MXL200406.40
203MXL203412.50
210MXL210426.72
212MXL212430.78
215MXL215436.88
216MXL216438.91
218MXL218442.98
219MXL219445.01
221MXL221449.07
224MXL224455.17
225MXL225457.20
228MXL228463.30
229MXL229465.33
232MXL232471.42
234MXL234475.49
235MXL235477.52
236MXL236479.55
239MXL239485.65
240MXL240487.68
243MXL243493.78
245MXL245497.84
250MXL250508.00
256MXL256520.19
260MXL260528.32
262MXL262532.38
265MXL265538.48
275MXL275558.80
276MXL276560.83
280MXL280568.96
284MXL284577.09
285MXL285579.12
288MXL288585.22
290MXL290589.28
297MXL297603.50
298MXL298605.54
300MXL300609.60
310MXL310629.92
312MXL312633.98
318MXL318646.18
320MXL320650.24
322MXL322654.30
323MXL323656.34
326MXL326662.43
328MXL328666.50
330MXL330670.56
332MXL332674.62
333MXL333676.66
339MXL339688.85
346MXL346703.07
347MXL347705.10
350MXL350711.20
360MXL360731.52
363MXL363737.62
371MXL371753.87
372MXL372755.90
378MXL378768.10
380MXL380772.16
386MXL386784.35
390MXL390792.48
400MXL400812.80
408MXL408829.06
410MXL410833.12
412MXL412837.18
413MXL413839.22
430MXL430873.76
435MXL435883.92
438MXL438890.02
440MXL440894.08
453MXL453920.50
468MXL468950.98
473MXL473961.14
482MXL482979.42
487MXL487989.58
500MXL5001016.00
504MXL5041024.13
515MXL5151046.48
516MXL5161048.51
522MXL5221060.70
532MXL5321081.02
537MXL5371091.18
541MXL5411099.31
570MXL5701158.24
638MXL6381296.42
648MXL6481316.74
705MXL7051432.56
750MXL7501524.00
760MXL7601544.32
955MXL9551940.56
1012MXL10122056.38
1060MXL10602153.92
1088MXL10882210.82
1137MXL11372310.38
1250MXL12502540.00
1426MXL14262897.63
1463MXL14632972.82
1516MXL15163080.51
1520MXL15203088.64
2044MXL20444153.41

Product Features

S type circular tooth profile economic type timing belt is made of rubber, featuring deviation prevention and wear resistance■S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the timing belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly timing belt, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②Remove the old timing belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right belt to replace.
④To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new timing belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Pulleys S2M Type Flat Belts For General Use (Economy Series) Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economic type Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance


Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
60
90
  1. << PrevTrước
  2. 6
  3. 7
  4. 8
  5. 9
  6. 10
  7. NextKế tiếp >>
Part Number
C-TBN239MXL037SALE
C-TBN239MXL050SALE
C-TBN240MXL019SALE
C-TBN240MXL025SALE
C-TBN240MXL037SALE
C-TBN240MXL050SALE
C-TBN243MXL019SALE
C-TBN243MXL025SALE
C-TBN243MXL037SALE
C-TBN243MXL050SALE
C-TBN245MXL019SALE
C-TBN245MXL025SALE
C-TBN245MXL037SALE
C-TBN245MXL050SALE
C-TBN250MXL019SALE
C-TBN250MXL025SALE
C-TBN250MXL037SALE
C-TBN250MXL050SALE
C-TBN256MXL019SALE
C-TBN256MXL025SALE
C-TBN256MXL037SALE
C-TBN256MXL050SALE
C-TBN260MXL019SALE
C-TBN260MXL025SALE
C-TBN260MXL037SALE
C-TBN260MXL050SALE
C-TBN262MXL019SALE
C-TBN262MXL025SALE
C-TBN262MXL037SALE
C-TBN262MXL050SALE
C-TBN265MXL019SALE
C-TBN265MXL025SALE
C-TBN265MXL037SALE
C-TBN265MXL050SALE
C-TBN275MXL019SALE
C-TBN275MXL025SALE
C-TBN275MXL037SALE
C-TBN275MXL050SALE
C-TBN276MXL019SALE
C-TBN276MXL025SALE
C-TBN276MXL037SALE
C-TBN276MXL050SALE
C-TBN280MXL019SALE
C-TBN280MXL025SALE
C-TBN280MXL037SALE
C-TBN280MXL050SALE
C-TBN284MXL019SALE
C-TBN284MXL025SALE
C-TBN284MXL037SALE
C-TBN284MXL050SALE
C-TBN285MXL019SALE
C-TBN285MXL025SALE
C-TBN285MXL037SALE
C-TBN285MXL050SALE
C-TBN288MXL019SALE
C-TBN288MXL025SALE
C-TBN288MXL037SALE
C-TBN288MXL050SALE
C-TBN290MXL019SALE
C-TBN290MXL025SALE
C-TBN290MXL037SALE
C-TBN290MXL050SALE
C-TBN297MXL019SALE
C-TBN297MXL025SALE
C-TBN297MXL037SALE
C-TBN297MXL050SALE
C-TBN298MXL019SALE
C-TBN298MXL025SALE
C-TBN298MXL037SALE
C-TBN298MXL050SALE
C-TBN300MXL019SALE
C-TBN300MXL025SALE
C-TBN300MXL037SALE
C-TBN300MXL050SALE
C-TBN310MXL019SALE
C-TBN310MXL025SALE
C-TBN310MXL037SALE
C-TBN310MXL050SALE
C-TBN312MXL019SALE
C-TBN312MXL025SALE
C-TBN312MXL037SALE
C-TBN312MXL050SALE
C-TBN318MXL019SALE
C-TBN318MXL025SALE
C-TBN318MXL037SALE
C-TBN318MXL050SALE
C-TBN320MXL019SALE
C-TBN320MXL025SALE
C-TBN320MXL037SALE
C-TBN320MXL050SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngCore Wire Material Belt Width (mm)
(mm) 		Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

40,928 VND

34,789 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber9.50.37485.65239

40,963 VND

34,819 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber12.70.5485.65239

25,208 VND

21,427 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber4.80.19487.68240

25,211 VND

21,429 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber6.40.25487.68240

25,219 VND

21,436 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber9.50.37487.68240

40,409 VND

34,348 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5487.68240

15,460 VND

13,141 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire4.80.19493.776243

18,577 VND

15,790 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire6.40.25493.776243

29,592 VND

25,153 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire9.50.37493.776243

39,103 VND

33,238 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire12.70.5493.776243

25,530 VND

21,701 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber4.80.19497.84245

25,549 VND

21,717 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber6.40.25497.84245

40,931 VND

34,791 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber9.50.37497.84245

40,968 VND

34,823 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber12.70.5497.84245

25,208 VND

21,427 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber4.80.19508250

25,211 VND

21,429 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber6.40.25508250

40,402 VND

34,342 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber9.50.37508250

40,409 VND

34,348 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5508250

15,667 VND

13,317 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber4.80.19520.19256

19,755 VND

16,792 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber6.40.25520.19256

31,373 VND

26,667 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber9.50.37520.19256

41,474 VND

35,253 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber12.70.5520.19256

19,514 VND

16,587 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber4.80.19528.32260

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25528.32260

36,236 VND

30,801 VND

4 Piece(s) Available 6 Day(s) [Glass Fiber] Glass Fiber9.50.37528.32260

47,550 VND

40,418 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5528.32260

15,669 VND

13,319 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber4.80.19532.38262

20,142 VND

17,121 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber6.40.25532.38262

31,912 VND

27,125 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber9.50.37532.38262

42,247 VND

35,910 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber12.70.5532.38262

17,874 VND

15,193 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber4.80.19538.48265

25,593 VND

21,754 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25538.48265

36,833 VND

31,308 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber9.50.37538.48265

48,458 VND

41,189 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5538.48265

25,540 VND

21,709 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber4.80.19558.8275

25,559 VND

21,725 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25558.8275

40,944 VND

34,802 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber9.50.37558.8275

40,985 VND

34,837 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber12.70.5558.8275

15,761 VND

13,397 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire4.80.19560.832276

20,630 VND

17,536 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire6.40.25560.832276

32,635 VND

27,740 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire9.50.37560.832276

43,286 VND

36,793 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire12.70.5560.832276

25,540 VND

21,709 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber4.80.19568.96280

25,561 VND

21,727 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber6.40.25568.96280

40,946 VND

34,804 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber9.50.37568.96280

40,988 VND

34,840 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber12.70.5568.96280

19,104 VND

16,238 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber4.80.19577.09284

25,552 VND

21,719 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber6.40.25577.09284

39,864 VND

33,884 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber9.50.37577.09284

44,814 VND

38,092 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber12.70.5577.09284

25,208 VND

21,427 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber4.80.19579.12285

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25579.12285

40,405 VND

34,344 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37579.12285

40,412 VND

34,350 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5579.12285

16,673 VND

14,172 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber4.80.19585.22288

21,839 VND

18,563 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber6.40.25585.22288

34,383 VND

29,226 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber9.50.37585.22288

45,567 VND

38,732 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber12.70.5585.22288

25,542 VND

21,711 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber4.80.19589.28290

25,563 VND

21,729 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber6.40.25589.28290

40,950 VND

34,808 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber9.50.37589.28290

40,995 VND

34,846 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber12.70.5589.28290

20,023 VND

17,020 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber4.80.19603.5297

25,552 VND

21,719 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber6.40.25603.5297

40,937 VND

34,796 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber9.50.37603.5297

46,732 VND

39,722 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber12.70.5603.5297

16,829 VND

14,305 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire4.80.19605.536298

22,077 VND

18,765 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire6.40.25605.536298

34,691 VND

29,487 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire9.50.37605.536298

46,025 VND

39,121 VND

4 Piece(s) Available 13 Day(s) [Glass Fiber] Glass Core Wire12.70.5605.536298

25,208 VND

21,427 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber4.80.19609.6300

25,211 VND

21,429 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber6.40.25609.6300

40,405 VND

34,344 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber9.50.37609.6300

40,417 VND

34,354 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5609.6300

25,547 VND

21,715 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber4.80.19629.92310

40,914 VND

34,777 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber6.40.25629.92310

40,958 VND

34,814 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber9.50.37629.92310

51,136 VND

43,466 VND

4 Piece(s) Available 8 Day(s) [Glass Fiber] Glass Fiber12.70.5629.92310

25,208 VND

21,427 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber4.80.19633.98312

25,214 VND

21,432 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber6.40.25633.98312

40,405 VND

34,344 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber9.50.37633.98312

41,631 VND

35,386 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5633.98312

23,311 VND

19,814 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber4.80.19646.18318

30,226 VND

25,692 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber6.40.25646.18318

43,745 VND

37,183 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37646.18318

57,649 VND

49,002 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5646.18318

18,214 VND

15,482 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber4.80.19650.24320

26,057 VND

22,148 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber6.40.25650.24320

37,392 VND

31,783 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber9.50.37650.24320

52,189 VND

44,361 VND

4 Piece(s) Available 14 Day(s) [Glass Fiber] Glass Fiber12.70.5650.24320

Loading...Tải…

  1. << PrevTrước
  2. 6
  3. 7
  4. 8
  5. 9
  6. 10
  7. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Shape Closed End Belt Tooth Surface Standard (Single Sided) Belt Material Rubber Belt
Belt Type MXL Belt Shape Type Trapezoidal Tooth Profile Circular Type Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.