(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Nominal
-
Number of Teeth(T)
-
Shaft Bore Dia. d(mm)
-
type
- C-DRCBW35
- C-DRCBW40
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 6 Day(s) or Less
- 12 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Idler Sprocket With Hub Japanese Standard
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
- Volume Discount
You can add up to 6 items per a category to the compare list.
Brand :
MiSUMi Economy
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 82,339VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
thận trọng
- **RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Similar Products
Product DetailProduct Description
This is an economy item, The price is cheaper than the MISUMI standard product.
Product Overview of Idlers
■Sprocket Idlers is a sprocket with a built-in bearing. Its main function is to change the rotating direction of the driven wheel, tension the chain, adjust the pressure angle and so on.
The Idlers is a part of the gear train that plays a transitional role. It does not change the transmission relationship. It is to make the force of the gear train more reasonable or to adapt to the layout of the entire transmission system.
■Only Idlers sprockets and chains with the same specifications can be used in combination.
This series is ISO standard 06C/ 08A/ (ANSI specifications 35B/40B) sprocket Idlers.
Do not use them with 06B/ 08B series sprockets and chains, which may cause the chain sprocket mechanism to fail to operate normally!
The Idlers is a part of the gear train that plays a transitional role. It does not change the transmission relationship. It is to make the force of the gear train more reasonable or to adapt to the layout of the entire transmission system.
■Only Idlers sprockets and chains with the same specifications can be used in combination.
This series is ISO standard 06C/ 08A/ (ANSI specifications 35B/40B) sprocket Idlers.
Do not use them with 06B/ 08B series sprockets and chains, which may cause the chain sprocket mechanism to fail to operate normally!
Dimensional Drawing of Idlers
Ordinary ISO standard 06C/08A/ (ANSI specifications 35B/40B) sprocket Idlers
Material Steel
Material SteelSpecifications Overview of Idlers
Features: tension is applied to the chain, preventing the chain vibration, noise and poor engagement of the Idlers sprocket.
This series is ISO standard 06C/ 08A/ (ANSI specifications 35B/ 40B) sprocket idlers, which can be used with our 35/40 chains
■Do not use them with 08B/ 06B/ 12B/ 16B series chains, which may cause the chain Idlers sprocket mechanism to fail to operate normally!
This series is ISO standard 06C/ 08A/ (ANSI specifications 35B/ 40B) sprocket idlers, which can be used with our 35/40 chains
■Do not use them with 08B/ 06B/ 12B/ 16B series chains, which may cause the chain Idlers sprocket mechanism to fail to operate normally!
| Part Number of Idlers |  Number of Teeth | d | Dp | Do | Dh | Cover hub | T | Bearing | |||||
 Type of Idlers |  No. | H | L | Part No. | Cr (dynamic rated load) kN | D1 | b | ||||||
| Steel | |||||||||||||
| C-DRCBW (S45C Induction Hardened Teeth Tip) | 35 | 10 | 10 | 30.82 | 34 | 13 | ＊24.5 | 20 | 4.3 | 6700ZZ | 0.85 | 15 | 4 |
| 12 | 12 | 36.8 | 41 | 18 | ＊30.5 | 6801ZZ | 1.92 | 21 | 5 | ||||
| 40 | 11 | 12 | 45.08 | 51 | 21 | ＊36 | 22 | 7.2 | 6901ZZ | 2.89 | 24 | 6 | |
| 14 | 12 | 57.07 | 63 | 24 | 42 | 6001ZZ | 5.1 | 28 | 8 | ||||
| 15 | 15 | 61.08 | 67 | 28 | 46 | 6002ZZ | 5.6 | 32 | 9 | ||||
| 20 | 25 | 81.18 | 88 | 36 | 67 | 25 | 6905ZZ | 7.05 | 42 | 9 | |||
Product Feature of Idlers
■Idlers Sprocket chain drive has the following features compared with gear drive and belt drive:
1. Idlers Multi-tooth load bearing, safe and reliable;
2. Flexible transmission, absorbing shock and vibration;
3. Large center distance range, low manufacturing and mounting accuracy requirements;
4. Compared with belt drive, the transmission ratio is accurate and the transmission efficiency is higher, suitable for high temperature.
■Two main purposes of the chain:
1. Connect the motor for transmission 2. Place the workpiece directly or indirectly on the chain for transfer
1. Idlers Multi-tooth load bearing, safe and reliable;
2. Flexible transmission, absorbing shock and vibration;
3. Large center distance range, low manufacturing and mounting accuracy requirements;
4. Compared with belt drive, the transmission ratio is accurate and the transmission efficiency is higher, suitable for high temperature.
■Two main purposes of the chain:
1. Connect the motor for transmission 2. Place the workpiece directly or indirectly on the chain for transfer
Example Use of Idlers
Used for driving power of Idlers
A mechanism that can convert motor power into roller rotation by combining multiple Idlers sprockets and chains
A mechanism that can convert motor power into roller rotation by combining multiple Idlers sprockets and chains
Used for transporting workpieces of Idlers
A chain conveyor frame with high versatility using flat profiles and chain guides
A chain conveyor frame with high versatility using flat profiles and chain guides
Used for transporting workpieces of Idlers
A mechanism used to mount accessories on the chain, and extract and transport workpieces
A mechanism used to mount accessories on the chain, and extract and transport workpieces
Precautions of Idlers
Usage Method of Idlers
How to mount the roller chain
(A) Axis configuration
■Horizontal Idlers
Even when the two axes are arranged horizontally, the rotation direction of the axis must be considered.
The examples (2) and (3) in the figure show that when the chain is stretched, the disengagement between the Idlers sprocket teeth and the chain is not smooth and may bite.
In particular, the upper and lower chains in (3) will contact each other, so an idler is required.
■Horizontal Idlers
Even when the two axes are arranged horizontally, the rotation direction of the axis must be considered.
The examples (2) and (3) in the figure show that when the chain is stretched, the disengagement between the Idlers sprocket teeth and the chain is not smooth and may bite.
In particular, the upper and lower chains in (3) will contact each other, so an idler is required.
■Vertical Idlers
If the chain is stretched, slack as shown in (5) will occur, and
when a small Idlers sprocket is used on the lower side, the chain may fall off. Therefore, please use it at an angle of 60 or less as shown in (4).
When it is necessary to use it vertically due to the mechanism or space, it is recommended to put the large sprocket on the lower side, and
use the Idlers on the outside or inside as shown in (6).
If the chain is stretched, slack as shown in (5) will occur, and
when a small Idlers sprocket is used on the lower side, the chain may fall off. Therefore, please use it at an angle of 60 or less as shown in (4).
When it is necessary to use it vertically due to the mechanism or space, it is recommended to put the large sprocket on the lower side, and
use the Idlers on the outside or inside as shown in (6).
(B) Deflection Idlers
Deflection is generally about 4% of the shaft spacing, and about 2% in the following cases.
a. Vertical transmission or close to vertical transmission
b. Shaft spacing is more than 1m
c. When frequent heavy load starting and stopping are required
d. When reverse rotation is required
Deflection is generally about 4% of the shaft spacing, and about 2% in the following cases.
a. Vertical transmission or close to vertical transmission
b. Shaft spacing is more than 1m
c. When frequent heavy load starting and stopping are required
d. When reverse rotation is required
(C)When the load changes Idlers
If a tension adjuster is mounted on the tension side or slack side of the chain to provide initial tension in advance, it will eliminate vibration and reduce noise during operation.
If a tension adjuster is mounted on the tension side or slack side of the chain to provide initial tension in advance, it will eliminate vibration and reduce noise during operation.
Related Products of Idlers
 |
| Idlers Sprocket 60B |
Specification Table of Idlers
Features: tension is applied to the chain, preventing the chain vibration, noise and poor engagement of the Idlers sprocket.
This series is ISO standard 06C/ 08A/ (ANSI specifications 35B/ 40B) sprocket idlers, which can be used with our 35/40 chains
■Do not use them with 08B/ 06B/ 12B/ 16B series chains, which may cause the chain Idlers sprocket mechanism to fail to operate normally!
This series is ISO standard 06C/ 08A/ (ANSI specifications 35B/ 40B) sprocket idlers, which can be used with our 35/40 chains
■Do not use them with 08B/ 06B/ 12B/ 16B series chains, which may cause the chain Idlers sprocket mechanism to fail to operate normally!
| Part Number of Idlers | Number of Teeth | d | Dp | Do | Dh | Cover hub | T | Bearing | |||||
| Type of Idlers | No. | H | L | Part No. | Cr (dynamic rated load) kN | D1 | b | ||||||
| Steel | |||||||||||||
| C-DRCBW (S45C Induction Hardened Teeth Tip) | 35 | 10 | 10 | 30.82 | 34 | 13 | ＊24.5 | 20 | 4.3 | 6700ZZ | 0.85 | 15 | 4 |
| 12 | 12 | 36.8 | 41 | 18 | ＊30.5 | 6801ZZ | 1.92 | 21 | 5 | ||||
| 40 | 11 | 12 | 45.08 | 51 | 21 | ＊36 | 22 | 7.2 | 6901ZZ | 2.89 | 24 | 6 | |
| 14 | 12 | 57.07 | 63 | 24 | 42 | 6001ZZ | 5.1 | 28 | 8 | ||||
| 15 | 15 | 61.08 | 67 | 28 | 46 | 6002ZZ | 5.6 | 32 | 9 | ||||
| 20 | 25 | 81.18 | 88 | 36 | 67 | 25 | 6905ZZ | 7.05 | 42 | 9 | |||
Specification Table
Features: tension is applied to the chain, preventing the chain vibration, noise and poor engagement of the sprocket.
This series is ISO standard 06C/ 08A/ (ANSI specifications 35B/ 40B) sprocket idlers, which can be used with our 35/40 chains
■Do not use them with 08B/ 06B/ 12B/ 16B series chains, which may cause the chain sprocket mechanism to fail to operate normally!
This series is ISO standard 06C/ 08A/ (ANSI specifications 35B/ 40B) sprocket idlers, which can be used with our 35/40 chains
■Do not use them with 08B/ 06B/ 12B/ 16B series chains, which may cause the chain sprocket mechanism to fail to operate normally!
| Part Number |  Number of Teeth | d | Dp | Do | Dh | Cover hub | T | Bearing | |||||
 Type |  No. | H | L | Part No. | Cr (dynamic rated load) kN | D1 | b | ||||||
| Steel | |||||||||||||
| C-DRCBW (S45C Induction Hardened Teeth Tip) | 35 | 10 | 10 | 30.82 | 34 | 13 | ＊24.5 | 20 | 4.3 | 6700ZZ | 0.85 | 15 | 4 |
| 12 | 12 | 36.8 | 41 | 18 | ＊30.5 | 6801ZZ | 1.92 | 21 | 5 | ||||
| 40 | 11 | 12 | 45.08 | 51 | 21 | ＊36 | 22 | 7.2 | 6901ZZ | 2.89 | 24 | 6 | |
| 14 | 12 | 57.07 | 63 | 24 | 42 | 6001ZZ | 5.1 | 28 | 8 | ||||
| 15 | 15 | 61.08 | 67 | 28 | 46 | 6002ZZ | 5.6 | 32 | 9 | ||||
| 20 | 25 | 81.18 | 88 | 36 | 67 | 25 | 6905ZZ | 7.05 | 42 | 9 | |||
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| C-DRCBW35-10 |
| C-DRCBW40-12 |
| C-DRCBW40-14 |
| C-DRCBW40-20 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Nominal | Number of Teeth (T) | Shaft Bore Dia. d (mm) |
|---|---|---|---|---|---|---|---|
82,339 VND | 4 Piece(s) | Available | 6 Day(s) | 35 | 10 | 10 | |
302,476 VND | 4 Piece(s) | Available | 6 Day(s) | 40 | 12 | 12 | |
333,743 VND | 4 Piece(s) | Available | 6 Day(s) | 40 | 14 | 12 | |
535,302 VND | 4 Piece(s) | Available | 12 Day(s) | 40 | 20 | 25 |
Loading...Tải…
Basic InformationThông tin cơ bản
| Sprocket Shape | Shape B | Type | Idlers | Number of Strands | 1 |
|---|---|---|---|---|---|
| Material | Steel | Chain Type | RS | Shaft Type | Bearing Built-in, Double |
| Surface Treatment | Black Oxide |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: I bought MISUMI chains, but why can't I use them on my original sprocket?
- Answer:Answer: Please confirm the specifications of the original sprocket and chain. Specification series number may not match. In addition, there are two specifications: A series and B series in China. The two specifications of sprocket chain are not universal.
- Question:Question: Does the chain need routine maintenance after installation and use?
- Answer:Answer: The chain needs regular maintenance after installation and use. These include daily lubricant application, confirmation of chain slack. The quality of lubrication will affect the life of the chain. Especially in recent years, high-speed use has been increasing, so it is necessary to take efficient lubrication methods.
- Question:Question: In chain drive, where is the tensioning wheel usually installed?
-
Answer:Answer:
Install the tensioning wheel on the inside of the loose edge of the belt close to the large pulley. It is often used when the center distance is not adjustable.
The tensioning wheel is automatically pressed on the outside of the loose side of the belt close to the small wheel by using the suspending weight. It is used for applications where the transmission ratio is large and the center distance is small. - Question:Question: How to use the carrier chain?
- Answer:Answer: The carrier chain can only be used for transmission, not for scenarios with large load and high positioning accuracy, please be careful!
- Question:Question: Can the chain be cut off when it is extended?
- Answer:Answer: It can be cut off. Our company has simple chain cutter available for selection.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy