(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Properties
- Standard
- Both Sides Cloth Lined
-
Belt Type
-
Belt Width(mm)
-
Number of Teeth
-
Belt Nominal Width
-
type
- C-LTBJA
- C-LTBRA
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 13 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Closed Belts S Type
You can add up to 6 items per a category to the compare list.
Brand :
MiSUMi Economy
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
thận trọng
- **RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Similar Products
Product DetailProduct Description
-Closed Belts S Type from MISUMI.
-This product series has 2 types available, C-LTBJA (Standard type) and C-LTBRA (Both Sides Cloth Lined).
-This is an economy item; The price is cheaper than the MISUMI standard product.
-The material of the timing belt is made of urethane with steel core wire.
-The allowable operating temperature range is -20 ~ 60°C. (Reference Value)
-Urethane belts may change color over time, but will not be affected to strength, etc.
This Conveyer provides a reference for the use of urethane belts and is not a functional guarantee for actual use.
Economy Urethane S-Type Closed Belt
Urethane MaterialSteel Core WireClosed-Loop Design
- Made from high-grade urethane, these belts offer superior resistance to abrasion, oil, and grease, making them ideal for demanding environments.
- The embedded steel core wire provides exceptional strength and tensile strength, preventing belt elongation and slippage for consistent power transmission.
- The welded joint creates a continuous loop, eliminating the need for separate fasteners and ensuring smooth, uninterrupted operation.
- Timing belt with various tooth pitches and widths
- The optional double-sided cloth lining reduces friction between the belt and conveying objects or pulleys, minimizing noise generation for quieter operation.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Conveyer Product Overview
The toothed Conveyer, timing belt is a component that transmits the rotational power generated by the motor. Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
The long toothed timing belt is a belt that freely specifies the number of teeth and is suitable for long-distance timing transmission.
There is also a both sides cloth-lined type suitable for cumulative transmission and noise reduction.
The long toothed timing belt is a belt that freely specifies the number of teeth and is suitable for long-distance timing transmission.
There is also a both sides cloth-lined type suitable for cumulative transmission and noise reduction.
Conveyer Product Feature
Feature 1: The Conveyer product has built-in steel core wire, which is more cost-effective and has a wider application range.
Feature 2: There is no exposed steel core wire on the side of the timing belt to avoid scratching the workpiece or hurting the operator.
Feature 3: STD toothed transmission accuracy is high, suitable for high torque transmission. S3M type is also available for small precision equipment.
Feature 4: Conveyer In addition to standard belts, there are also both sides cloth lined belts.
It can reduce the coefficient of friction between the conveying objects or between pulleys, and lower the noise.
Feature 5: Regular sampling of products is made to ensure a strength in the connection. (See the figure below)
Feature 2: There is no exposed steel core wire on the side of the timing belt to avoid scratching the workpiece or hurting the operator.
Feature 3: STD toothed transmission accuracy is high, suitable for high torque transmission. S3M type is also available for small precision equipment.
Feature 4: Conveyer In addition to standard belts, there are also both sides cloth lined belts.
It can reduce the coefficient of friction between the conveying objects or between pulleys, and lower the noise.
Feature 5: Regular sampling of products is made to ensure a strength in the connection. (See the figure below)
Dimensional Drawing Conveyer
Specifications Conveyer Overview
■Conveyer Material Table
■Conveyer Specification Table
Polyurethane Conveyer, belts may change color over time, but strength, etc. will not be affected.
Operating temperature -20℃ to 60℃ (reference value).
The Conveyer total length is the number of teeth x the tooth pitch. This is the calculated value. MISUMI takes the number of teeth as the basis for shipment.
| Conveyer Type | Conveyer Types |  Conveyer Material | ||
| ①Body | ②Core Wire | ③ Canvas | ||
| C-LTBJA | Standard | Polyrethane (white) | Steel wire | － |
| C-LTBRA | Both Sides Cloth Lined | Nylon canvas | ||
■Conveyer Specification Table
| Belt Type | Tooth pitch | Ra | Lr | H | h | i | Unit weight g/m (width: 10mm) |
| Standard | |||||||
| S3M | 3 | 1.95 | 1.95 | 1.94 | 1.14 | 0.8 | 25 |
| S5M | 5 | 3.25 | 3.25 | 3.41 | 1.91 | 1.5 | 39 |
| S8M | 8 | 5.2 | 5.2 | 5.3 | 3.05 | 2.25 | 51 |
Polyurethane Conveyer, belts may change color over time, but strength, etc. will not be affected.Operating temperature -20℃ to 60℃ (reference value).The Conveyer total length is the number of teeth x the tooth pitch. This is the calculated value. MISUMI takes the number of teeth as the basis for shipment.Example of Conveyer Use
This Conveyer provides a reference for the use of urethane belts and is not a functional guarantee for actual use.Equipment Name: Conveyer transfer device with different heights
Function Description:
Transfer the workpiece through the motor roller, and use the cylinder mechanism so that the workpiece drop to the lower conveyor for transmission. The purpose of transmission at different heights is achieved.
Function Description:
Transfer the workpiece through the motor roller, and use the cylinder mechanism so that the workpiece drop to the lower conveyor for transmission. The purpose of transmission at different heights is achieved.
Application Industries Conveyer
| Conveyer Food | Conveyer Semiconductor | Conveyer Smart phone | ||
 |  |  | ||
| Conveyer Medical | Conveyer Electronic & Electrical Appliances | Conveyer Lithium battery | ||
 |  |  |
Conveyer Precautions
■ Conveyer Chemical-Resistant
■ Precautions for Conveyer storage
① Avoid sunlight.
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
In particular, do not make oil adhere to the belt, otherwise it will cause the belt to swell, significantly shortening the life of the belt.
③ Operating temperature -20℃ to 60℃.
④ Do not accumulate in large quantities or forcibly bend.
⑤ Do not place it directly on the ground.
⑥ Do not make the belt contact with chemicals.
■ Precautions for Conveyer storage
① Avoid sunlight.
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
In particular, do not make oil adhere to the belt, otherwise it will cause the belt to swell, significantly shortening the life of the belt.
③ Operating temperature -20℃ to 60℃.
④ Do not accumulate in large quantities or forcibly bend.
⑤ Do not place it directly on the ground.
⑥ Do not make the belt contact with chemicals.
Related Conveyer Products
| (Economy series) slit Conveyer, timing belt | (Economy series) Conveyer, timing pulley S3M | (Economy series) Conveyer, timing belt connecting tooth plate | ||
 |  |  | ||
| Typical Conveyer model: C-TTBO-T5100-200 | Typical Conveyer model: C-HTPA16S3M100-A-P5 | Typical Conveyer model: C-TBCR-T5100 | ||
| Advantages: Number of teeth can be freely specified, suitable for reciprocating motion | Advantages: Less wear of timing belt and longer service life | Advantages: Can prevent the belt from being too tight |
Specification Conveyer Table
■Specification Conveyer Table
Please order after selecting part number and parameters according to the selection steps
to 
.
Total Conveyer length is (number of teeth × tooth pitch).
kgf = N × 0.101972
The allowable tension is only the permissible value associated with the tensile load.
■ Comparison Table of Coefficient of Friction (Reference Value)
The values in the table are examples of Conveyer measured values instead of standard values.
Please order after selecting part number and parameters according to the selection steps
to 
.| Part NumberConveyer TYPE | - |  Belt Number ·  Nominal Belt Width | - | Number of Teeth | ||||
| C-LTBJA | - | S5M100 | - | 200 | ||||
| Part Number | Conveyer, Belt Type | Belt Nominal Width | Number of Teeth Lower Limit to Upper Limit | Belt Width (mm) | Allowable tension (N) |
| Type | |||||
| C-LTBJA (Standard) C-LTBRA (Both Sides Cloth Lined) | S3M | 60 | 150~10000 | 6 | 70 |
| 100 | 10 | 80 | |||
| 150 | 15 | 110 | |||
| S5M | 100 | 100~10000 | 10 | 165 | |
| 150 | 15 | 230 | |||
| 250 | 25 | 400 | |||
| S8M | 150 | 88~6250 | 15 | 240 | |
| 250 | 25 | 450 | |||
| 300 | 30 | 530 | |||
| 400 | 40 | 650 |
Total Conveyer length is (number of teeth × tooth pitch).kgf = N × 0.101972The allowable tension is only the permissible value associated with the tensile load.■ Comparison Table of Coefficient of Friction (Reference Value)
| Conveyer, Belt type mating parts materials | Toothed Face, Back | |
| Cloth Lined | Standard | |
| Stainless Steel | 0.3 | 0.6 |
| Polyamide | 0.2 | 0.3 |
The values in the table are examples of Conveyer measured values instead of standard values. Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| C-LTBJA-S3M060-[150-10000/1] |
| C-LTBJA-S3M100-[150-10000/1] |
| C-LTBJA-S3M150-[150-10000/1] |
| C-LTBJA-S5M100-[100-10000/1] |
| C-LTBJA-S5M150-[100-10000/1] |
| C-LTBJA-S5M250-[100-10000/1] |
| C-LTBJA-S8M150-[88-6250/1] |
| C-LTBJA-S8M250-[88-6250/1] |
| C-LTBJA-S8M300-[88-6250/1] |
| C-LTBJA-S8M400-[88-6250/1] |
| C-LTBRA-S3M060-[150-10000/1] |
| C-LTBRA-S3M100-[150-10000/1] |
| C-LTBRA-S3M150-[150-10000/1] |
| C-LTBRA-S5M100-[100-10000/1] |
| C-LTBRA-S5M150-[100-10000/1] |
| C-LTBRA-S5M250-[100-10000/1] |
| C-LTBRA-S8M150-[88-6250/1] |
| C-LTBRA-S8M250-[88-6250/1] |
| C-LTBRA-S8M300-[88-6250/1] |
| C-LTBRA-S8M400-[88-6250/1] |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Properties | Belt Type | Belt Width (mm) | Number of Teeth | Belt Nominal Width |
|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 13 Day(s) | Standard | S3M | 6 | 150 ～ 10000 | 060 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S3M | 10 | 150 ～ 10000 | 100 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S3M | 15 | 150 ～ 10000 | 150 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S5M | 10 | 100 ～ 10000 | 100 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S5M | 15 | 100 ～ 10000 | 150 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S5M | 25 | 100 ～ 10000 | 250 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S8M | 15 | 88 ～ 6250 | 150 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S8M | 25 | 88 ～ 6250 | 250 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S8M | 30 | 88 ～ 6250 | 300 | ||
- | 1 Piece(s) | 13 Day(s) | Standard | S8M | 40 | 88 ～ 6250 | 400 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S3M | 6 | 150 ～ 10000 | 060 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S3M | 10 | 150 ～ 10000 | 100 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S3M | 15 | 150 ～ 10000 | 150 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S5M | 10 | 100 ～ 10000 | 100 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S5M | 15 | 100 ～ 10000 | 150 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S5M | 25 | 100 ～ 10000 | 250 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S8M | 15 | 88 ～ 6250 | 150 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S8M | 25 | 88 ～ 6250 | 250 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S8M | 30 | 88 ～ 6250 | 300 | ||
- | 1 Piece(s) | 13 Day(s) | Both Sides Cloth Lined | S8M | 40 | 88 ～ 6250 | 400 |
Loading...Tải…
Basic InformationThông tin cơ bản
| Belt Shape | Closed End (Weld Jointing) | Belt Material | Polyurethane | Core Wire Material | Steel Cord |
|---|---|---|---|---|---|
| Belt Shape Type | Round Tooth Profile Super Torque |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: Is the joint of the joint processed long type timing belt particularly easy to break?
- Answer:Answer: The joint of this belt is hot-melt connected, although the strength is lower than that of the body part, there will be no abnormalities such as breakage when used under normal tension. But it is not recommended to bend the joint, or breakage will be caused.
- Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
- Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
- Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
- Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
- Question:Question: What are the advantages of cloth lined timing belts compared to standard ones?
- Answer:Answer: Cloth lined toothed belt reduce the coefficient of friction and reduce noise generation.
- Question:Question: Urethane timing belt has changed color after being used for a period of time, will it affect the use?
- Answer:Answer: No, the urethane belt may change color over time, but there is no effect on strength, etc.
- Question:Question: What are the two main types of timing belts according to their functions? What is the role?
- Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy