What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What standard does the vibration class of this bearing meet?

The vibration class of the bearing is above Z1

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-E6009ZZ

type Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

type
- C-E6□□□ZZ
ClearTrống
Inner Dia. d(Ø)
10

12

15

17

20

25

30

35

40

45

50
ClearTrống
Outer Dia. D(Ø)
15

18

19

21

22

23

24

26

27

28

30

32

35

37

40

42

47

52

55

58

62

65

68

72

75

80

85

90

100

110
ClearTrống
Width B (or T)(mm)
4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

23

25

27
ClearTrống
Basic Load Rating Cr (Dynamic)(N)
600

640

660

700

730

1280

1340

1460

1560

1890

2020

2560

2800

3010

3190

3260

3290

3430

3570

3920

4270

4330

4480

4620

4760

4940

5080

5430

5740

6580

6690

6720

6790

7070

7980

8540

8960

9240

9450

9800

9870

10150

11130

11200

11760

13650

14630

14840

15260

17990

18690

20370

22050

23450

24500

28350

37100

43400
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day
ClearTrống

Specify AlterationsChỉ định thay đổi

Ball Bearings (C-E6009ZZ)

Name: Ball Bearings
Brand: MISUMI
Price: 78846 VND
Availability: InStock

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Until 31/12/2024
Volume Discount

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
The requirements of vibration class Z1 of the industry are met at ultra-low price

Product Description

Ball Bearings
Ball bearings are used in a variety of industrial machinery, including pumps, motors, and machine tools. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter Minimum / Maximum (mm.) : 10 and 50
● Outer Diameter Minimum / Maximum (mm.) : 15 and 110
● Width Minimum / Maximum (mm.) : 4 and 27
● Precision (JIS) : Class 0
● Bearing Type : Closed (Double Shielded (ZZ))
● Load Direction : Radial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Precision Ball Bearing

SUJ2 steelHigher precisionRotation Speed

- Size Range: Wider range of sizes compared to miniature bearings (10-50mm bore).

- Accuracy: Higher precision (Class 0) compared to standard bearings.

- High Load Capacity: Handles heavier loads compared to miniature bearings.

- Rotation Speed: Suitable for various speed applications.

- Low Friction: Efficient operation with minimal energy loss.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Ball Bearings Product Overview

・ Ball Bearings Light load, medium · low speed, special for medium precision rotation, realizing ultra-low price.
・ It is made of industry standard bearing steel with high surface hardness and wear resistance.
・ The vibration class of the product is above Z1

Ball Bearings Product Feature

・ Ball Bearings The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ Ball Bearings with dust cover or seal packing are sealed with proper amount of high-quality grease. Deep groove ball bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

Ball Bearings Dimensional Drawing

Ball Bearings Product Dimensional Drawing
Deep groove ball bearing Dimensional drawing

Ball Bearings Example of Use

Motor

Gear unit

Machine tool
3 Machine tool

Ball Bearings Precautions

Ball Bearings When the precision of the shaft and bearing housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Ball Bearings heater
Bearing heater

Proper installation of the bearing heater can guarantee a long life of the bearing.
Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Ball Bearings puller
Bearing puller

When the installation state of the bearing is in the following situations, the special puller can be used for disassembly.
(a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
(b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
(c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Ball Bearings Specification Table

Key points of ecconomy series products confirmation ①

Inner Diameter d (mm)		Clearance of MISUMI quality products (μm)		Clearance of economy series products (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Only 10		2	13	4	18
10	18	3	18	6	23
18	24	5	20	8	25
24	30	5	20	8	25

Part Number	d	D	B	r (min.)	Key points of economy series products confirmation ② Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions				Weight (g) (Reference)
								Ds		dh (max.)	R (max.)
					Cr (Dynamic) kN	Cor (Static) kN		(min.)	(max.)	dh (max.)	R (max.)
C－E6700ZZ	10	15	4	0.2	0.6	0.3	8000	10.4	11.21	14.2	0.2	2
C－E6800ZZ		19	5	0.3	1.28	0.65		12	12.5	17	0.3	5
C－E6900ZZ		22	6		1.89	0.89		12	13	20		9
C－E6000ZZ		26	8		3.19	1.37		12	13.5	24		19
C－E6200ZZ		30	9	0.6	3.57	1.67		14	16	26	0.6	32
C－E6300ZZ		35	11	0.6	5.74	2.45		14	16.5	31	0.6	52
C－E6701ZZ	12	18	4	0.2	0.64	0.37		12.4	13.86	16.7	0.2	3
C－E6801ZZ		21	5	0.3	1.34	0.73		14	14.5	19	0.3	6
C－E6901ZZ		24	6		2.02	1.02			15	22		11
C－E6001ZZ		28	8		3.57	1.67			16	26		21
C－E6201ZZ		32	10	0.6	4.27	1.93		16	17	28	0.6	37
C－E6301ZZ		37	12	1	6.79	2.94		17	18	32	1	60
C－E6702ZZ	15	21	4	0.2	0.66	0.41		15.4	16.86	19.7	0.2	4
C－E6802ZZ		24	5	0.3	1.46	0.88		17	17.5	22	0.3	7
C－E6902ZZ		28	7		2.56	1.4			17.5	26		16
C－E6002ZZ		32	9		3.92	1.98			19	30		30
C－E6202ZZ		35	11	0.6	5.43	2.52		19	20	31	0.6	45
C－E6302ZZ		42	13	1	7.98	3.82		20	22.5	37	1	83
C－E6703ZZ	17	23	4	0.2	0.7	0.46		17.4	18.86	21.1	0.2	4
C－E6803ZZ		26	5	0.3	1.56	1.02		19	19.5	24	0.3	8
C－E6903ZZ		30	7		3.26	1.81			20	28		18
C－E6003ZZ		35	10		4.76	2.35			21	33		39
C－E6203ZZ		40	12	0.6	6.72	3.22		21	23	36	0.6	66
C－E6303ZZ		47	14	1	9.45	4.59		22	25.5	42	1	113
C－E6704ZZ	20	27	4	0.2	0.73	0.51		20.4	22.36	25.5	0.2	6
C－E6804ZZ		32	7	0.3	2.8	1.73		22	22.5	30	0.3	19
C－E6904ZZ		37	9	0.3	4.48	2.59		22	24	35	0.3	36
C－E6004ZZ		42	12	0.6	6.58	3.54		24	26	38	0.6	69
C－E6204ZZ		47	14	1	8.96	4.66		25	28	42	1	106
C－E6304ZZ		52	15	1.1	11.13	5.53		26.5		45.5	1	145
C－E6805ZZ	25	37	7	0.3	3.01	2.07		27		35	0.3	22
C－E6905ZZ		42	9	0.3	4.94	3.19		27	29	40	0.3	42
C－E6005ZZ		47	12	0.6	7.07	4.1		29	30.5	43	0.6	80
C－E6205ZZ		52	15	1	9.8	5.5		30	32	47	1	128
C－E6305ZZ		62	17	1.1	14.84	7.63		31.5	36	55.5	1	235
C－E6806ZZ	30	42	7	0.3	4538	3402		32	33	40	0.3	27
C－E6906ZZ		47	9	0.3	7242	5003		32	34	45	0.3	53
C－E6006ZZ		55	13	1	9240	5810		35	37	50	1	116
C－E6206ZZ		62	16	1	13650	7910		35	39	57		199
C－E6306ZZ		72	19	1.1	26700	15000		36.5	42.5	65.5		345
C－E6807ZZ	35	47	7	0.3	4729	3821		37	38	45	0.3	32
C－E6907ZZ		55	10	0.6	10900	7818		39	40	51	0.6	88
C－E6007ZZ		62	14	1	16000	10300		40	42	57	1	151
C－E6207ZZ		72	17	1.1	25700	15300		41.5	45	65.5	1	284
C－E6307ZZ		80	21	1.5	33500	19200		43	47	72	1.5	464
C－E6808ZZ	40	52	7	0.3	3570	3080		42	43	50	0.3	33
C－E6908ZZ		62	12	0.6	13678	9968		44	45	58	0.6	132
C－E6008ZZ		68	15	1	16800	11500		45	47	63	1	190
C－E6208ZZ		80	18	1.1	29100	17900		46.5	51	73.5	1	366
C－E6308ZZ		90	23	1.5	40500	24000		48	53	82	1.5	636
C－E6809ZZ	45	58	7	0.3	6187	5381		47	47.5	56	0.3	42
C－E6909ZZ		68	12	0.6	14100	10830		49	50	64	0.6	148
C－E6009ZZ		75	16	1	20900	15200		50	53.5	70	1	241
C－E6209ZZ		85	19	1.1	31500	20400		51.5	55.5	78.5	1	420
C－E6309ZZ		100	25	1.5	53000	32000		53	61.5	92	1.5	829
C－E6810ZZ	50	65	7	0.3	6610	6090		52	52.5	63	0.3	65
C－E6910ZZ		72	12	0.6	14540	11710		54	55	68	0.6	145
C－E6010ZZ		80	16	1	21800	16600		55	57.5	75	1	261
C－E6210ZZ		90	20	1	35000	23200		56.5	60	83.5	1	459
C－E6310ZZ		110	27	2	62000	38500		59	68	101	2	1060

kgf＝N×0.101972

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-E6009ZZ SALE

Part Number Price Minimum Order Qty. Volume Discount Days to ShipSố ngày giao hàng Inner Dia. d
(Ø) Outer Dia. D
(Ø) Width B (or T)
(mm) Basic Load Rating Cr (Dynamic)
(N) Basic Load Rating Cor (Static)
(N) Weight
(g)

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
	78,846 VND 67,019 VND	1 Piece(s)	Available	Same day	45	75	16	14630	10640	241

78,846 VND

67,019 VND

1 Piece(s)

Available

Same day

14630

10640

241

Loading...Tải…

Basic InformationThông tin cơ bản

Raceway Ring Shape	Ball	Bearing Type	Double Shielded	Outer Ring Type	Flat
Inner/Outer Ring Material	SUJ2 Equiv.	Specifications, Environment	Standard / Dust Resistant	Precision (JIS)	Class 0
Load Direction	Radial	Rolling Element Material	SUJ2	Size Standards	Metric System
Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

Please check the type/dimensions/specifications of the part C-E6009ZZ in the Ball Bearings series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần C-E6009ZZ trong chuỗi Ball Bearings.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What is the difference between ball bearing and roller bearing?: Answer:Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question:Question: What is the classification of bearings according to the shape of rolling elements?: Answer:Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question:Question: What is the classification of bearings according to load direction?: Answer:Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question:Question: What standard does the vibration class of this bearing meet?: Answer:Answer: The vibration class of the bearing is above Z1

Check other FAQ (1 items) HideĐóng.

Products like this...

Part Number
C-E6003ZZ
C-E6004ZZ
C-E6005ZZ
C-E6010ZZ
C-E6200ZZ
C-E6201ZZ

Standard Unit Price	Minimum order quantity	Volume Discount	Days to ShipSố ngày giao hàng	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
17,591 VND	1 Piece(s)	Available	Same day	17	35	10	4760	2350	39
20,195 VND	1 Piece(s)	Available	Same day	20	42	12	6580	3540	69
22,739 VND	1 Piece(s)	Available	Same day	25	47	12	7070	4100	80
82,629 VND	1 Piece(s)	Available	Same day	50	80	16	15260	11620	261
14,607 VND	1 Piece(s)	Available	Same day	10	30	9	3570	1670	32
14,623 VND	1 Piece(s)	Available	Same day	12	32	10	4270	1930	37

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh