(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Full Stroke (Range)(mm)
- 1~2.6
- 3~4.5
-
Plunger O.D.(Ø)
-
Plunger Length L1 (Range)(mm)
-
Plunger Length(mm)
-
Plunger Tip Shape
- C40 Type
- J40 Type
- A Type
- AK Type
- B Type
- C Type
- D Type
- E Type
- G Type
- H Type
- N Type
- RH Type
-
type
- C-NP20
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
Specify AlterationsChỉ định thay đổi
NP20 Series Contact Probes Min Pitch 0.9mm, Stroke 2.0mm【50 Pieces Per Package】
- Volume Discount
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 551,552VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
thận trọng
- **RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
-
- Order Qty.Số lượng đặt hàng :
-
-
- PriceĐơn giá :
- ---
-
- Total PriceTổng合計합계 :
- ---
-
- Days to shipThời gian xuất hàng出荷日출하일 :
- ---
-
- Order Qty.Số lượng đặt hàng :
-
-
- PriceĐơn giá :
- ---
-
- Total PriceTổng合計합계 :
- ---
-
- Days to shipThời gian xuất hàng出荷日출하일 :
- ---
-
- Order Qty.Số lượng đặt hàng :
-
-
- PriceĐơn giá :
- ---
-
- Total PriceTổng合計합계 :
- ---
-
- Days to shipThời gian xuất hàng出荷日출하일 :
- ---
Similar Products
-
- Order Qty.Số lượng đặt hàng :
-
-
- PriceĐơn giá :
- ---
-
- Total PriceTổng合計합계 :
- ---
-
- Days to shipThời gian xuất hàng出荷日출하일 :
- ---
Product Detail
Product Description
This is an economy item, The price is cheaper than the MISUMI standard product.
Economy NP20 Series Contact Probes
- Minimum Pitch Ensures Versatile Fit.
- Reliable performance with a precise stroke range.
- Efficiently handle electrical loads with safe and reliable performance.
- Withstands up to 30,000 operations without compromise.
- Low resistance for reliable connectivity.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview of Contact Probes
Contact Probes is a contact medium for electrical testing, and a high-end precision electronic hardware component.
It can be used to check the conductivity of all electronic circuits.
Product Feature of Contact Probes
Dimensional Drawing of Contact Probes
Example Use of Contact Probes
Precautions of Contact Probes
■General environmental conditions
· Operating ambient temperature is 10 to 40 ℃, humidity is 30% below
· Surrounding environment: An environment where there is no dust, corrosive gas, oil, etc. so that the Contact Probes is not polluted.
■Stroke condition
· Please apply axial load only, not transverse load.
· Exceeding the specified stroke (2/3 of the full stroke) will significantly reduce the life of the probe.
· The Contact Probes life may be shortened if moving at a speed of more than 60 times /min (constant speed).
■Current application condition
· Please apply current in a static state and in contact with the target contact within the specified stroke.
· The probe life may be significantly reduced if current is applied during operation within the specified stroke, outside the specified stroke, or without contact with the target contact (open circuit).
· The probe may not meet the maximum allowable current listed in the catalog due to aging and other reasons. Please design to ensure there is enough margin in actual use.
■Voltage application condition
· Please apply voltage in a static state and in contact with the target contact within the specified stroke.
· Do not apply voltage without contact with the target contact (open circuit). Otherwise, it will cause electric discharge when it is about to be touched, causing damage to the probe.
· When applying high voltage to the Contact Probes, please strictly observe the application conditions of current and voltage, and pay attention to avoid discharge phenomenon and instantaneous huge current generated during discharge.
■Maximum allowable current
· The maximum allowable current listed in the product catalog is the maximum value of continuous current flowing within 1 minute under the above-mentioned conditions (general environment, stroke, application of current and voltage).
■Contact resistance
· The resistance value listed in the product catalog refers to the representative value measured by applying a current of 10 mA to the probe and making it contact with the pure silver terminal under the above-mentioned conditions (general environment, stroke, application of current and voltage).
· If the flowing current is too large, the resistance may increase due to the internal aging of the contact or probe.
· After repeated operations within the specified stroke, the resistance may increase due to the aging of the contact or probe.
■Reference number of replacements
· The reference number of replacements listed in the product catalog refers to the reference number for probes that can be used normally when the current is 10mA under the above conditions (general environment, stroke, application of current and voltage).
· When the resistance increases or the spring pressure decreases due to the difference in the operating environment and conditions, the probe may need to be replaced before the reference number is reached. Please replace it in time according to actual usage.
■Spring pressure
· If the Contact Probes temperature exceeds 80 ℃, the spring pressure will drop.
· If the current value is increased, the spring pressure may drop due to the heating of the probe.
■Mounting hole size for press-fit (reference)
· Reference value only, depending on the material and thickness of the resin plate. Please design referring to the size of the probe holder press-fit part.
Usage Method of Contact Probes
Please select the product according to the mounting pitch (spacing) of the workpiece to be inspected.
Also, select the probe holder corresponding to the probe.
＊ The probe is different from the probe holder mounted directly on the resin plate, can be easily disassembled, saving time to replace the probe.
●About the use of the Contact Probes (probe holder)
① Insert the probe holder after opening holes on the resin plate (bakelite board, etc.). (See Diagram 1)
* For the opening size, please refer to the mounting hole size for press-fit as documented on each page. (See Diagram 2)
* If there is clearance between the resin plate and the probe holder, please fix it with adhesive before using it.
② After installation, wire to the probe holder.
＊ When soldering wires, please be careful not to let the flux flow into the probe holder. Otherwise, the probe may not work.
＊ Depending on the environment, if there is no space for soldering or wiring, please perform wiring before press-fit.
③ Insert the Contact Probes into the probe holder. (Refer to Diagram 1)
* At this time, if the tip (plunger) part is pressed down forcefully, it may cause damage or deterioration in function. Please be careful.
＊ Please use within the prescribed stroke (2/3 of the full stroke).
Related Products of Contact Probes
| MISUMI Contact Probes C-NP84 series matching probe holder product NR84 |
 |
Specification Table of Contact Probes
| Part Number | - | Tip Shape | - | Lead Wire Color | - | Lead Wire Length |
| C‐NP84 | - | G |
■ Contact Probes
| Part Number | Mounting Pitch (min) | Full stroke | Spring pressure | Maximum Allowable Current | Resistance | Reference number of replacements | |
| Initial stage | 2/3 stroke | ||||||
| C‐NP20 | 0.9mm | 2.0mm | 20gf | 50gf | 1.5A | 80mΩ | 30,000 times |
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
| Part Number |
|---|
| C-NP20-A |
| C-NP20-AK |
| C-NP20-B |
| C-NP20-C |
| C-NP20-C40 |
| C-NP20-D |
| C-NP20-E |
| C-NP20-G |
| C-NP20-H |
| C-NP20-J40 |
| C-NP20-N |
| C-NP20-RH |
| Part Number | Price | Minimum Order Qty. | Number of pc(s). included in pkg.Number of pc(s). included in pkg. | Volume Discount | Days to ShipSố ngày giao hàng | Full Stroke (Range) (mm) | Plunger O.D. (Ø) | Plunger Length L1 (Range) (mm) | Plunger Length (mm) | Plunger Tip Shape |
|---|---|---|---|---|---|---|---|---|---|---|
551,552 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 1~2.6 | 0.5 | 3.1~5 | 4 | A Type | |
624,119 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 3~4.5 | 0.35 | 5.1~8 | 3 | AK Type | |
581,377 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 1~2.6 | 0.5 | 3.1~5 | 4 | B Type | |
581,377 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 3~4.5 | 0.35 | 0.1~3 | 3 | C Type | |
581,377 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 1~2.6 | 0.35 | 3.1~5 | 4 | C40 Type | |
581,377 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 1~2.6 | 0.5 | 3.1~5 | 4 | D Type | |
581,377 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 1~2.6 | 0.5 | 3.1~5 | 4 | E Type | |
581,377 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 1~2.6 | 0.5 | 3.1~5 | 4 | G Type | |
592,991 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 1~2.6 | 0.35 | 3.1~5 | 4 | H Type | |
581,377 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 1~2.6 | 0.35 | 3.1~5 | 4 | J40 Type | |
581,377 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 3~4.5 | 0.35 | 0.1~3 | 3 | N Type | |
624,119 VND | 1 Pack(s) | 50 Pieces Per Package 50 Pieces Per Package | Available | Same day | 3~4.5 | 0.5 | 5.1~8 | 4 | RH Type |
| Part Number |
|---|
Loading...Tải…
Basic InformationThông tin cơ bản
| Type | Contact Probe | Min. Mounting Pitch(mm) | 0.9 | Full Stroke(mm) | 2 |
|---|---|---|---|---|---|
| 2/3 Stroke Spring Pressure (Range)(gf) | 30.1~50 | Plunger Material | SK4 | Plunger Surface Treatment | Gold Plating on Nickel Undercoat |
| Barrel, Receptacle Material | Phosphor Bronze | Barrel, Receptacle O.D.(Ø) | 0.48 | Barrel, Receptacle Length L2 (Range)(mm) | 10.1~15 |
| Properties | Standard | Initial Spring Pressure (Range)(gf) | 10.1~20 | Allowable Current(A) | 1.5 |
| Resistance(mΩ) | 80 | Barrel, Receptacle Length(mm) | 15.0 | Initial Spring Pressure(gf) | 20 |
| 2/3 Stroke Spring Pressure(gf) | 50 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: What are the operating environment conditions for probes?
- Answer:Answer: Ambient temperature is 10 to 40℃, humidity is below 30%, and there is no dust, corrosive gas, oil, etc., so that the probe is not polluted.
- Question:Question: Does the center distance chosen for the probe refer to the center distance between two adjacent probes?
- Answer:Answer: Yes. If it is less than the minimum mounting pitch, the installation of two adjacent probes interferes with each other.
- Question:Question: If I choose a non-lead type product, how to use it?
- Answer:Answer: The customer shall weld the wire by himself.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy