Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.

Applicable load of cam follower

It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(58 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-CFA3-10

Outer Dia. D Width B Stud Screw Nominal (M) Roller Guiding Method Cam Follower: Stud Screw (Fine Thread) Allowable Rotational Speed Seal Application type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. D(Ø)
10

12

13

16

19

22

26

30

32

35

40

52

62

72

80

85

90
ClearTrống
Width B(mm)
7

8

9

11

12

14

18

20

24

29

35
ClearTrống
Stud Screw Nominal (M)(mm)
M3×0.5

M4×0.7

M5×0.8

M6×1

M8×1.25
ClearTrống
Roller Guiding Method
- With Retainer
ClearTrống
Cam Follower: Stud Screw (Fine Thread)(mm)
M10×1

M12×1.5

M16×1.5

M18×1.5

M20×1.5
ClearTrống
Allowable Rotational Speed(rpm)
770

787

850

1100

1400

1600

1608

1678

1975

2100

2300

2400

2600

2900

3100

3600

3800

5500

8000

11000

14000

16240

19000

20720

23200

25000

26320

29600

37600
ClearTrống
Seal
- Not Provided
- Provided
ClearTrống
Application
- Heavy Load
- Regular
ClearTrống
type
- C-CFA
- C-CFAG
- C-CFFA
- C-CFFAG
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

18 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Cam Followers Flat, Hex Socket

Name: Cam Followers Flat, Hex Socket
Brand: MISUMI
Availability: InStock

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Until 31/12/2024
Volume Discount

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-CFA3-10 SALE

C-CFA4-12 SALE

C-CFA5-13 SALE

C-CFA6-16 SALE

C-CFA8-19 SALE

C-CFA10-22 SALE

C-CFA10-26 SALE

C-CFA12-30 SALE

C-CFA12-32 SALE

C-CFA16-35 SALE

C-CFA18-40 SALE

C-CFA20-52 SALE

C-CFAG3-10 SALE

C-CFAG4-12 SALE

C-CFAG5-13 SALE

C-CFAG6-16 SALE

C-CFAG8-19 SALE

C-CFAG10-22 SALE

C-CFAG10-26 SALE

C-CFAG12-30 SALE

C-CFA3-10

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

- Cam Followers Flat, Hex Socket from MISUMI.
- This is an economy item; The price is cheaper than the MISUMI standard product.
- This series have 4 types available: C-CFFA (Normal load with seal), C-CFA (Normal load without seal), C-CFFAG (Heavy load with seal), C-CFAG (Heavy load without seal)
- The material of cam follower is made of SUJ2.
- Operating environment temperature is lower than 80℃.

Economy Cam Followers Flat

Robust Material Composition Temperature Resilience Heavy Load

- Made from high-quality SUJ2 steel, ensuring durability and long-lasting performance even in demanding industrial environments.

- Operates efficiently in environments below specified temperature.

- The heavy load series is designed to withstand significant weight, ensuring reliability in high-stress applications such as automation and heavy machinery.

- Available in multiple sizes and configurations, including cylindrical and spherical outer ring shapes, to fit various mechanical systems with precision.

- Global Availability: MISUMI's extensive distribution network ensures timely delivery and support, making it a reliable choice for engineers and purchasers worldwide.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Roller Followers Product Overview

Roller Followers Cam bearing is a kind of bearing with shaft, which has its needle roller mounted into the thick-wall outer ring and inner ring, most suitable for the transmission guide rail.
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside.
The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation.
In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.

Economic type Medium precision Cam follower - Hex socket on head - Product overview

Economic type Medium precision Cam follower - Hex socket on head - Product overview

Roller Followers Product Feature

1. Equipped with a shaft for easy installation!
2. Ideal for places subject to loads!
3. Also suitable for high speed rotation!

Standard Cam Follower Structure
Economic type Medium precision Cam follower - Hex socket on head - Product features

Economic type Medium precision Cam follower - Hex socket on head - Product features

Roller Guide Mode
The Roller Followers cam with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.
Economic type Medium precision Cam follower - Hex socket on head - Product features

Structure of Sealing Part
For the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.
Economic type Medium precision Cam follower - Hex socket on head - Product features

Outer Ring O.D. Shape
The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Economic type Medium precision Cam follower - Hex socket on head - Product features

Slide Rail Load Capacity Comparison
Economic type Medium precision Cam follower - Hex socket on head - Product features

Roller Followers Specification Table

Roller Followers Dimensional Drawing

Cylindrical Type
Economic type Medium precision Cam follower - Hex socket on head - Dimensional drawing

Part Number			D	M×pitch	B	B₁	L	ℓ	r	f	H	Basic Rated Load				Maximum Allowable Load (kN)		Rail Load Capacity (kN)		Rotation Speed Limit (rpm)			Wright (g)
Type	d_h7 Tolerance											Normal Low Dust		Heavy Load		Normal Low Dust	Heavy Load	Normal Low Dust	Heavy Load	Normal Low Dust		Heavy Load	Normal Low Dust
												C (Dynamic)	Cor (Static)	C (Dynamic)	Cor (Static)					With Packing	Without Packing	With Packing
												kN	kN	kN	kN
(With Packing) C-CFFA C-CFFAG (Without Packing) C-CFA C-CFAG	3	0	10	3×0.5	7	8	17	5	0.3	6.8	2	1.18	0.94	2.5	2.61	0.29	0.5	0.3	1.36	26320	37600	25000	4.5
		-0.01
	4	0 -0.012	12	4×0.7	8	9	20	6		8.6	2.5	1.65	1.64	3.5	3.8	0.62	0.92	0.38	1.79	20720	29600	19000	7.5
	5		13	5×0.8	9	10	23	7.5	0.15	9.7	3	2.51	2.22	4.5	5.3	1.14	1.64	0.42	2.22	16240	23200	15000	10.5
	6		16	6×1.0	11	12.2	28	8		12.5	4	3.15	3.3	4.9	6.5	1.69	2.11	0.86	3.4	14000	14000	3800	18.5
	8	0 -0.015	19	8×1.25			32	10		15		3.5	3.9	5.4	7.9	3.78	4.73	1.1	4.05	11000	11000	3100	28.5
	10		22	10×1.0	12	13.2	36	12	0.3	17.5	5	4.5	5.2	6.2	9.1	4.65	5.81	1.34	5.15	8000	8000	2600	45
			26									5.1	6.2	7.3	11.3			1.83	6.1			2600	60
	12		30	12×1.5	14	15.2	40	13	0.6	23	6	6.8	8.4	9.5	14.6	7.5	9.37	1.96	7.7	5500	5500	2100	95
		0	32									7.1	8.9	10	15.8		9.37	2.19	8.2			2100	105
	16	-0.018	35	16×1.5	18	19.6	52	17		27.6	8	9.8	14.1	12.8	23	13.84	17.3	2.51	11.9	3600	3600	1600	170
	18		40	18×1.5	20	21.6	58	19	1	31.5		10.9	15.5	14.8	26.5	20.88	26.1	2.98	14.5	2900	2900	1400	250
	20	0	52	20×1.5	24	25.6	66	21		36.5	10	16.7	29	22.6	48	25.68	32.1	6.58	23.3	2400	2400	2300	460
		-0.021
	24	－	62	24×1.5	29	30.6	80	25	1.1	44	14	26	48	34	75	61	98	－	－	1900	－	1100	770
			72									28	53	36.5	85	67	111	－	－		－		787
	30	－	80	30×1.5	35	37	100	32		53		39	77	49.5	117	9900	153	－	－	1300	－	850	1608
			85											51	123	10400	162	－	－		－		1678
			90									41	83	52	129	10600	169	－	－		－		1975

[ ! ]kgf＝N×0.101972

Roller Followers Specifications Overview

Roller Followers Product Accuracy (μm)

Allowable Tolerance
Economic type Medium precision Cam follower- Hex socket on head - Specification overview

Allowable Tolerance of Outer Ring and Allowable Value
Economic type Medium precision Cam follower- Hex socket on head - Specification overview

Roller Followers Example of Use



Moving Direction
Linear Motion The surface on the matching side must be flat and the cam follower moves in a straight line		Swing Direction The surface on the matching side is curved, and the cam follower moves in a curve

Roller Followers Attaching Method
Economic type Medium precision Cam follower - Hex socket on head - Example of use

Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Use a hex socket wrench or a slotted screwdriver.
Secure the hexagon socket or screwdriver slot for fixing, and then turn the nut with a wrench to tighten.

Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Economic type Medium precision Cam follower - Hex socket on head - Example of use

Roller Followers Precautions

· If the cam follower falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add the proper amount of grease to the products that are not filled with grease before use.

Cam Follower Grease Performance and Service Temperature
Economic type Medium precision Cam follower - Hex socket on head - Precautions

Economic type Medium precision Cam follower - Hex socket on head - Precautions

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-CFA3-10SALE
C-CFA4-12SALE
C-CFA5-13SALE
C-CFA6-16SALE
C-CFA8-19SALE
C-CFA10-22SALE
C-CFA10-26SALE
C-CFA12-30SALE
C-CFA12-32SALE
C-CFA16-35SALE
C-CFA18-40SALE
C-CFA20-52SALE
C-CFAG3-10SALE
C-CFAG4-12SALE
C-CFAG5-13SALE
C-CFAG6-16SALE
C-CFAG8-19SALE
C-CFAG10-22SALE
C-CFAG10-26SALE
C-CFAG12-30SALE
C-CFAG12-32SALE
C-CFAG16-35SALE
C-CFAG18-40SALE
C-CFAG20-52SALE
C-CFFA3-10SALE
C-CFFA4-12SALE
C-CFFA5-13SALE
C-CFFA6-16SALE
C-CFFA8-19SALE
C-CFFA10-22SALE
C-CFFA10-26SALE
C-CFFA12-30SALE
C-CFFA12-32SALE
C-CFFA16-35SALE
C-CFFA18-40SALE
C-CFFA20-52SALE
C-CFFA24-62SALE
C-CFFA24-72SALE
C-CFFA30-80SALE
C-CFFA30-85SALE
C-CFFA30-90SALE
C-CFFAG3-10SALE
C-CFFAG4-12SALE
C-CFFAG5-13SALE
C-CFFAG6-16SALE
C-CFFAG8-19SALE
C-CFFAG10-22SALE
C-CFFAG10-26SALE
C-CFFAG12-30SALE
C-CFFAG12-32SALE
C-CFFAG16-35SALE
C-CFFAG18-40SALE
C-CFFAG20-52SALE
C-CFFAG24-62SALE
C-CFFAG24-72SALE
C-CFFAG30-80SALE
C-CFFAG30-85SALE
C-CFFAG30-90SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	RoHS	Outer Dia. D (Ø)	Width B (mm)	Stud Screw Nominal (M) (mm)	Roller Guiding Method	Cam Follower: Stud Screw (Fine Thread) (mm)	Basic Load Rating Cr (Dynamic) (kN)	Basic Load Rating Cor (Static) (kN)	Allowable Rotational Speed (rpm)	Seal	Application
107,599 VND 91,459 VND	1 Piece(s)	Available	Same day	-	10	7	M3×0.5	With Retainer	-	1.18	0.94	37600	Not Provided	Regular
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	-	12	8	M4×0.7	With Retainer	-	1.65	1.64	29600	Not Provided	Regular
94,942 VND 80,701 VND	1 Piece(s)	Available	Same day	-	13	9	M5×0.8	With Retainer	-	2.51	2.22	23200	Not Provided	Regular
93,609 VND 79,568 VND	1 Piece(s)	Available	Same day	-	16	11	M6×1	With Retainer	-	3.15	3.3	14000	Not Provided	Regular
93,654 VND 79,606 VND	1 Piece(s)	Available	Same day	-	19	11	M8×1.25	With Retainer	-	3.5	3.9	11000	Not Provided	Regular
93,720 VND 79,662 VND	1 Piece(s)	Available	Same day	-	22	12	-	With Retainer	M10×1	4.5	5.2	8000	Not Provided	Regular
110,619 VND 94,026 VND	1 Piece(s)	Available	Same day	-	26	12	-	With Retainer	M10×1	4.5	5.2	8000	Not Provided	Regular
118,410 VND 100,649 VND	1 Piece(s)	Available	Same day	-	30	14	-	With Retainer	M12×1.5	6.8	8.4	5500	Not Provided	Regular
126,186 VND 107,258 VND	1 Piece(s)	Available	Same day	-	32	14	-	With Retainer	M12×1.5	6.8	8.4	5500	Not Provided	Regular
152,853 VND 129,925 VND	1 Piece(s)	Available	Same day	-	35	18	-	With Retainer	M16×1.5	9.8	14.1	3600	Not Provided	Regular
188,333 VND 160,083 VND	1 Piece(s)	Available	Same day	-	40	20	-	With Retainer	M18×1.5	10.9	15.5	2900	Not Provided	Regular
281,636 VND 239,391 VND	1 Piece(s)	Available	Same day	-	52	24	-	With Retainer	M20×1.5	16.7	29	2400	Not Provided	Regular
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	-	10	7	M3×0.5	-	-	2.5	2.61	25000	Not Provided	Heavy Load
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	-	12	8	M4×0.7	-	-	3.5	3.8	19000	Not Provided	Heavy Load
94,932 VND 80,692 VND	1 Piece(s)	Available	Same day	-	13	9	M5×0.8	-	-	4.5	5.3	23200	Not Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	-	16	11	M6×1	-	-	4.9	6.5	3800	Not Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	-	19	11	M8×1.25	-	-	5.4	7.9	3100	Not Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	-	22	12	-	-	M10×1	6.2	9.1	2600	Not Provided	Heavy Load
100,626 VND 85,532 VND	1 Piece(s)	Available	Same day	-	26	12	-	-	M10×1	7.3	11.3	2600	Not Provided	Heavy Load
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	-	30	14	-	-	M12×1.5	9.5	14.6	2100	Not Provided	Heavy Load
114,594 VND 97,405 VND	1 Piece(s)	Available	18 Day(s)	-	32	14	-	-	M12×1.5	10	15.8	2100	Not Provided	Heavy Load
139,115 VND 118,248 VND	1 Piece(s)	Available	Same day	10	35	18	-	-	M16×1.5	12.8	23	1600	Not Provided	Heavy Load
170,618 VND 145,025 VND	1 Piece(s)	Available	Same day	-	40	20	-	-	M18×1.5	14.8	26.5	1400	Not Provided	Heavy Load
254,731 VND 216,521 VND	1 Piece(s)	Available	Same day	-	52	24	-	-	M20×1.5	22.6	48	2300	Not Provided	Heavy Load
107,596 VND 91,457 VND	1 Piece(s)	Available	Same day	-	10	7	M3×0.5	With Retainer	-	1.18	0.94	26320	Provided	Regular
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	-	12	8	M4×0.7	With Retainer	-	1.65	1.64	20720	Provided	Regular
97,068 VND 82,508 VND	1 Piece(s)	Available	Same day	-	13	9	M5×0.8	With Retainer	-	2.51	2.22	16240	Provided	Regular
93,606 VND 79,565 VND	1 Piece(s)	Available	Same day	-	16	11	M6×1	With Retainer	-	3.15	3.3	14000	Provided	Regular
93,650 VND 79,603 VND	1 Piece(s)	Available	Same day	-	19	11	M8×1.25	With Retainer	-	3.5	3.9	11000	Provided	Regular
97,204 VND 82,623 VND	1 Piece(s)	Available	Same day	-	22	12	-	With Retainer	M10×1	4.5	5.2	8000	Provided	Regular
114,407 VND 97,246 VND	1 Piece(s)	Available	Same day	-	26	12	-	With Retainer	M10×1	4.5	5.2	8000	Provided	Regular
107,922 VND 91,734 VND	1 Piece(s)	Available	Same day	-	30	14	-	With Retainer	M12×1.5	6.8	8.4	5500	Provided	Regular
129,624 VND 110,180 VND	1 Piece(s)	Available	Same day	-	32	14	-	With Retainer	M12×1.5	6.8	8.4	5500	Provided	Regular
156,573 VND 133,087 VND	1 Piece(s)	Available	Same day	-	35	18	-	With Retainer	M16×1.5	9.8	14.1	3600	Provided	Regular
188,322 VND 160,074 VND	1 Piece(s)	Available	Same day	-	40	20	-	With Retainer	M18×1.5	10.9	15.5	2900	Provided	Regular
287,602 VND 244,462 VND	1 Piece(s)	Available	Same day	-	52	24	-	With Retainer	M20×1.5	16.7	29	2400	Provided	Regular
410,292 VND 348,748 VND	1 Piece(s)	Available	Same day	-	62	29	-	With Retainer	-	26	48	1100	Provided	Regular
477,128 VND 405,559 VND	1 Piece(s)	Available	18 Day(s)	-	72	29	-	With Retainer	-	28	53	1100	Provided	Regular
578,586 VND 491,798 VND	1 Piece(s)	Available	18 Day(s)	-	80	35	-	With Retainer	-	39	77	850	Provided	Regular
623,067 VND 529,607 VND	1 Piece(s)	Available	18 Day(s)	-	85	35	-	With Retainer	-	39	77	850	Provided	Regular
712,106 VND 605,290 VND	1 Piece(s)	Available	18 Day(s)	-	90	35	-	With Retainer	-	41	83	850	Provided	Regular
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	-	10	7	M3×0.5	-	-	2.5	2.61	25000	Provided	Heavy Load
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	-	12	8	M4×0.7	-	-	3.5	3.8	19000	Provided	Heavy Load
97,056 VND 82,498 VND	1 Piece(s)	Available	Same day	-	13	9	M5×0.8	-	-	4.5	5.3	16240	Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	-	16	11	M6×1	-	-	4.9	6.5	3800	Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	-	19	11	M8×1.25	-	-	5.4	7.9	3100	Provided	Heavy Load
97,056 VND 82,498 VND	1 Piece(s)	Available	Same day	-	22	12	-	-	M10×1	6.2	9.1	2600	Provided	Heavy Load
104,041 VND 88,435 VND	1 Piece(s)	Available	Same day	-	26	12	-	-	M10×1	7.3	11.3	2600	Provided	Heavy Load
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	-	30	14	-	-	M12×1.5	9.5	14.6	2100	Provided	Heavy Load
118,084 VND 100,371 VND	1 Piece(s)	Available	Same day	-	32	14	-	-	M12×1.5	10	15.8	2100	Provided	Heavy Load
142,605 VND 121,214 VND	1 Piece(s)	Available	Same day	-	35	18	-	-	M16×1.5	12.8	23	1600	Provided	Heavy Load
177,679 VND 151,027 VND	1 Piece(s)	Available	Same day	-	40	20	-	-	M18×1.5	14.8	26.5	1400	Provided	Heavy Load
261,716 VND 222,459 VND	1 Piece(s)	Available	Same day	-	52	24	-	-	M20×1.5	22.6	48	2300	Provided	Heavy Load
546,394 VND 464,435 VND	1 Piece(s)	Available	Same day	-	62	29	-	-	-	34	75	770	Provided	Heavy Load
479,940 VND 407,949 VND	1 Piece(s)	Available	Same day	-	72	29	-	-	-	36.5	85	787	Provided	Heavy Load
581,400 VND 494,190 VND	1 Piece(s)	Available	Same day	-	80	35	-	-	-	49.5	117	1608	Provided	Heavy Load
625,882 VND 532,000 VND	1 Piece(s)	Available	18 Day(s)	-	85	35	-	-	-	51	120	1678	Provided	Heavy Load
714,920 VND 607,682 VND	1 Piece(s)	Available	Same day	-	90	35	-	-	-	52	129	1975	Provided	Heavy Load

Loading...Tải…

Product TOP

Basic InformationThông tin cơ bản

Product Category	Cam Followers	Roller Type	Cylindrical Outer Ring	Tightening Method	Hex Socket on Head
Cam Follower Type	Standard Type	Size Standards	Metric System	Roller Lining	Not Provided
Shaft	Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Mounting Method: Answer:Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Question:Question: Applicable load of cam follower: Answer:Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
Question:Question: Usage difference of different O.D. shapes of outer ring: Answer:Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. D(Ø)

Width B(mm)

Stud Screw Nominal (M)(mm)

Roller Guiding Method

Cam Follower: Stud Screw (Fine Thread)(mm)

Allowable Rotational Speed(rpm)

Seal

Application

type

CADCAD