Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.

Applicable load of cam follower

It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(58 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-CFUA3-10

Outer Dia. D Width B Stud Screw Nominal (M) Roller Guiding Method Cam Follower: Stud Screw (Fine Thread) Allowable Rotational Speed Seal Application type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. D(Ø)
10

12

13

16

19

22

26

30

32

35

40

52

62

72

80

85

90
ClearTrống
Width B(mm)
7

8

9

11

12

14

18

20

24

29

35
ClearTrống
Stud Screw Nominal (M)(mm)
M3×0.5

M4×0.7

M5×0.8

M6×1

M8×1.25
ClearTrống
Roller Guiding Method
- With Retainer
ClearTrống
Cam Follower: Stud Screw (Fine Thread)(mm)
M10×1

M12×1.5

M16×1.5

M18×1.5

M20×1.5
ClearTrống
Allowable Rotational Speed(rpm)
770

787

850

1100

1608

1678

1975

2400

2900

3600

5000

5500

8000

11000

14000

16240

20720

23200

26320

29600

37600
ClearTrống
Seal
- Not Provided
- Provided
ClearTrống
Application
- Heavy Load
- Regular
ClearTrống
type
- C-CFUA
- C-CFUAG
- C-CUA
- CFUAG
- CUAG
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

18 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Cam Followers Crown,Hex Socket (Part Number)

Name: Cam Followers Crown,Hex Socket
Brand: MISUMI
Availability: InStock

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Until 31/12/2024
Volume Discount

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-CFUA3-10 SALE

C-CFUA4-12 SALE

C-CFUA5-13 SALE

C-CFUA6-16 SALE

C-CFUA8-19 SALE

C-CFUA10-22 SALE

C-CFUA10-26 SALE

C-CFUA12-30 SALE

C-CFUA12-32 SALE

C-CFUA16-35 SALE

C-CFUA18-40 SALE

C-CFUA20-52 SALE

C-CFUA24-62 SALE

C-CFUA24-72 SALE

C-CFUA30-80 SALE

C-CFUA30-85 SALE

C-CFUA30-90 SALE

C-CFUAG3-10 SALE

C-CFUAG4-12 SALE

C-CFUAG5-13 SALE

C-CFUA3-10

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Products with d ≥ 10 are being gradually switched over to specifications with through holes in the L dimension. Please take this into account prior to purchasing.

Product Description

This is an economy item, The price is cheaper than the MISUMI standard product.

Economy Cam Followers Crown

High-Quality SUJ2 Various Stud Screw Sizes Easy Installation

- Manufactured from premium SUJ2 steel. Provides exceptional durability and wear resistance for long-lasting performance in demanding applications.

- Comes with multiple stud screw size options.

- Features a hex socket on the head for secure fastening. Simplifies installation and adjustment, reducing setup time and effort.

- Roller with various diameter and width options

- Crown shape design improves load distribution and reduces friction. Enhances the efficiency of the cam follower, leading to better overall performance and longevity.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Roller Followers Product Overview

Roller Followers Cam bearing is a kind of bearing with shaft, which has its needle roller mounted into the thick-wall outer ring and inner ring, most suitable for the transmission guide rail.
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside.
The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation.
In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.

Economic type Medium precision Cam follower - Hex socket on head - Product overview

Economic type Medium precision Cam follower - Hex socket on head - Product overview

Roller Followers Product Feature

1. Equipped with a shaft for easy installation!
2. Ideal for places subject to loads!
3. Also suitable for high speed rotation!

Standard Cam Follower Structure
Economic type Medium precision Cam follower - Hex socket on head - Product features

Economic type Medium precision Cam follower - Hex socket on head - Product features

Roller Guide Mode
The cam follower with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.
Economic type Medium precision Cam follower - Hex socket on head - Product features

Roller Followers Structure of Sealing Part
For the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.
Economic type Medium precision Cam follower - Hex socket on head - Product features

Outer Ring O.D. Shape
The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Economic type Medium precision Cam follower - Hex socket on head - Product features

Slide Rail Load Capacity Comparison
Economic type Medium precision Cam follower - Hex socket on head - Product features

Roller Followers Specification Table

Roller Followers Dimensional Drawing

Arc Type
Economic type Medium precision Cam follower - Hex socket on head - Dimensional drawing

Part Number			D	M×pitch	B	B₁	L	D₁	ℓ	r	Basic Rated Load				Maximum Allowable Load (kN)		Rail Load Capacity (kN)		Rotation Speed Limit (rpm)			Weight (g)
Type	d_h7Tolerance										Normal Low Dust		Heavy Load		Normal Low Dust	Heavy Load	Normal Low Dust	Heavy Load	Normal Low Dust		Heavy Load	Normal Low Dust
Type	d_h7Tolerance										C (Dynamic) kN	Cor(Static) kN	C (Dynamic) kN	Cor (Static) kN	Normal Low Dust	Heavy Load	Normal Low Dust	Heavy Load	With Packing	Without Packing	With Packing	Normal Low Dust
(With Packing) C－CFUA C－CFUAG (Without Packing) C－CUA C－CUAG	3	0 －0.01	10	3×0.5	7	8	17	7	5	0.3	1.18	0.94	2.5	2.61	0.29	0.5	0.3	0.56	26320	37600	25000	4.5
	4	0 －0.012	12	4×0.7	8	9	20	8.5	6	0.3	1.65	1.64	3.5	3.8	0.62	0.92	0.38	0.72	20720	29600	19000	7.5
	5		13	5×0.8	9	10	23	9.6	7.5	0.15	2.51	2.22	4.5	5.3	1.14	1.64	0.42	0.8	16240	23200	15000	10.5
	6		16	6×1.0	11	12.2	28	12.5	8		3.15	3.3	4.9	6.5	1.69	2.11	0.86	1.08	14000	14000	3800	18.5
	8	0 －0.015	19	8×1.25	11	12.2	32	15	10		3.5	3.9	5.4	7.9	3.78	4.73	1.1	1.37	11000	11000	3100	28.5
	10		22	10×1.0	12	13.2	36	17.5	12	0.3	4.5	5.2	6.2	9.1	4.65	5.81	1.34	1.67	8000	8000	2600	45
	10		26	10×1.0	12	13.2	36	17.5	12	0.3	5.1	6.2	7.3	11.3	4.65	5.81	1.83	2.06	8000	8000	2600	60
	12	0 －0.018	30	12×1.5	14	15.2	40	23	13	0.6	6.8	8.4	9.5	14.6	7.5	9.37	1.96	2.62	5500	5500	2100	95
	12		32	12×1.5	14	15.2	40	23	13		7.1	8.9	10	15.8	7.5	9.37	2.19	2.86	5500	5500	2100	105
	16		35	16×1.5	18	19.6	52	27.6	17		9.8	14.1	12.8	23	13.84	17.3	2.51	3.2	3600	3600	1600	170
	18		40	18×1.5	20	21.6	58	31.5	19	1	10.9	15.5	14.8	26.5	20.88	26.1	2.98	3.85	2900	2900	1400	250
	20	0 －0.021	52	20×1.5	24	25.6	66	36.5	21	1	16.7	29	22.6	48	25.68	32.1	6.58	7.65	2400	2400	2300	460
	24	－	62	24×1.5	29	30.6	80	44	25	1.1	26	48	34	75	61	98	－	－	1900	－	1100	770
	24	－	72	24×1.5	29	30.6	80	44	25		28	53	36.5	85	67	111	－	－	1900	－	1100	787
	30	－	80	30×1.5	35	37	100	53	32		39	77	49.5	117	9900	153	－	－	1300	－	850	1608
			85								39	77	51	123	10400	162	－	－		－		1678
			90								41	83	52	129	10600	169	－	－		－		1975

kgf＝N×0.101972

Roller Followers Specifications Overview

Product Accuracy (μm)

Allowable Tolerance
Economic type Medium precision Cam follower- Hex socket on head - Specification overview

Allowable Tolerance of Outer Ring and Allowable Value
Economic type Medium precision Cam follower- Hex socket on head - Specification overview

Roller Followers Example of Use



Moving Direction
Linear Motion The surface on the matching side must be flat and the cam follower moves in a straight line		Swing Direction The surface on the matching side is curved, and the cam follower moves in a curve

Attaching Method
Economic type Medium precision Cam follower - Hex socket on head - Example of use

Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Use a hex socket wrench or a slotted screwdriver.
Secure the hexagon socket or screwdriver slot for fixing, and then turn the nut with a wrench to tighten.

Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Economic type Medium precision Cam follower - Hex socket on head - Example of use

Roller Followers Precautions

· If the Roller Followers falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add proper amount of grease to the products that are not filled with grease before use.

Cam Follower Grease Performance and Service Temperature
Economic type Medium precision Cam follower - Hex socket on head - Precautions

Economic type Medium precision Cam follower - Hex socket on head - Precautions

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
C-CFUA3-10SALE
C-CFUA4-12SALE
C-CFUA5-13SALE
C-CFUA6-16SALE
C-CFUA8-19SALE
C-CFUA10-22SALE
C-CFUA10-26SALE
C-CFUA12-30SALE
C-CFUA12-32SALE
C-CFUA16-35SALE
C-CFUA18-40SALE
C-CFUA20-52SALE
C-CFUA24-62SALE
C-CFUA24-72SALE
C-CFUA30-80SALE
C-CFUA30-85SALE
C-CFUA30-90SALE
C-CFUAG3-10SALE
C-CFUAG4-12SALE
C-CFUAG5-13SALE
C-CFUAG6-16SALE
C-CFUAG8-19SALE
C-CFUAG10-22SALE
C-CFUAG10-26SALE
C-CFUAG12-30SALE
C-CFUAG12-32SALE
C-CFUAG16-35SALE
C-CFUAG18-40SALE
C-CFUAG20-52SALE
C-CFUAG24-62SALE
C-CFUAG24-72SALE
C-CFUAG30-80SALE
C-CFUAG30-85SALE
C-CFUAG30-90SALE
C-CUA3-10SALE
C-CUA4-12SALE
C-CUA5-13SALE
C-CUA6-16SALE
C-CUA8-19SALE
C-CUA10-22SALE
C-CUA10-26SALE
C-CUA12-30SALE
C-CUA12-32SALE
C-CUA16-35SALE
C-CUA18-40SALE
C-CUA20-52SALE
C-CUAG3-10SALE
C-CUAG4-12SALE
C-CUAG5-13SALE
C-CUAG6-16SALE
C-CUAG8-19SALE
C-CUAG10-22SALE
C-CUAG10-26SALE
C-CUAG12-30SALE
C-CUAG12-32SALE
C-CUAG16-35SALE
C-CUAG18-40SALE
C-CUAG20-52SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Outer Dia. D (Ø)	Width B (mm)	Stud Screw Nominal (M) (mm)	Roller Guiding Method	Cam Follower: Stud Screw (Fine Thread) (mm)	Basic Load Rating Cr (Dynamic) (kN)	Basic Load Rating Cor (Static) (kN)	Allowable Rotational Speed (rpm)	Seal	Application
107,596 VND 91,457 VND	1 Piece(s)	Available	Same day	10	7	M3×0.5	With Retainer	-	1.18	0.94	26320	Provided	Regular
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	12	8	M4×0.7	With Retainer	-	1.65	1.64	20720	Provided	Regular
97,068 VND 82,508 VND	1 Piece(s)	Available	Same day	13	9	M5×0.8	With Retainer	-	2.51	2.22	16240	Provided	Regular
93,606 VND 79,565 VND	1 Piece(s)	Available	Same day	16	11	M6×1	With Retainer	-	3.15	3.3	14000	Provided	Regular
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	19	11	M8×1.25	With Retainer	-	3.5	3.9	11000	Provided	Regular
104,041 VND 88,435 VND	1 Piece(s)	Available	Same day	22	12	-	With Retainer	M10×1	4.5	5.2	8000	Provided	Regular
118,278 VND 100,536 VND	1 Piece(s)	Available	Same day	26	12	-	With Retainer	M10×1	4.5	5.2	8000	Provided	Regular
122,496 VND 104,122 VND	1 Piece(s)	Available	Same day	30	14	-	With Retainer	M12×1.5	6.8	8.4	5500	Provided	Regular
133,844 VND 113,767 VND	1 Piece(s)	Available	Same day	32	14	-	With Retainer	M12×1.5	6.8	8.4	5500	Provided	Regular
165,407 VND 140,596 VND	1 Piece(s)	Available	Same day	35	18	-	With Retainer	M16×1.5	9.8	14.1	3600	Provided	Regular
204,252 VND 173,614 VND	1 Piece(s)	Available	Same day	40	20	-	With Retainer	M18×1.5	10.9	15.5	2900	Provided	Regular
295,421 VND 251,108 VND	1 Piece(s)	Available	Same day	52	24	-	With Retainer	M20×1.5	16.7	29	2400	Provided	Regular
425,118 VND 361,350 VND	1 Piece(s)	Available	18 Day(s)	62	29	-	With Retainer	-	26	48	1100	Provided	Regular
511,750 VND 434,988 VND	1 Piece(s)	Available	18 Day(s)	72	29	-	With Retainer	-	28	53	1100	Provided	Regular
593,415 VND 504,403 VND	1 Piece(s)	Available	18 Day(s)	80	35	-	With Retainer	-	39	77	850	Provided	Regular
637,970 VND 542,275 VND	1 Piece(s)	Available	18 Day(s)	85	35	-	With Retainer	-	39	77	850	Provided	Regular
734,387 VND 624,229 VND	1 Piece(s)	Available	18 Day(s)	90	35	-	With Retainer	-	41	83	850	Provided	Regular
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	10	7	M3×0.5	-	-	2.5	2.61	26320	Provided	Heavy Load
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	12	8	M4×0.7	-	-	3.5	3.8	20720	Provided	Heavy Load
97,056 VND 82,498 VND	1 Piece(s)	Available	Same day	13	9	M5×0.8	With Retainer	-	4.5	5.3	16240	Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	16	11	M6×1	-	-	3.15	3.3	14000	Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	19	11	M8×1.25	-	-	5.4	7.9	11000	Provided	Heavy Load
104,041 VND 88,435 VND	1 Piece(s)	Available	Same day	22	12	-	With Retainer	M10×1	6.2	9.1	8000	Provided	Heavy Load
107,611 VND 91,469 VND	1 Piece(s)	Available	Same day	26	12	-	-	M10×1	7.3	11.3	8000	Provided	Heavy Load
111,101 VND 94,436 VND	1 Piece(s)	Available	Same day	30	14	-	-	M12×1.5	9.5	14.6	5000	Provided	Heavy Load
121,577 VND 103,340 VND	1 Piece(s)	Available	Same day	32	14	-	-	M12×1.5	6.8	8.4	5500	Provided	Heavy Load
149,664 VND 127,214 VND	1 Piece(s)	Available	Same day	35	18	-	-	M16×1.5	9.8	14.1	3600	Provided	Heavy Load
184,664 VND 156,964 VND	1 Piece(s)	Available	Same day	40	20	-	-	M18×1.5	10.9	15.5	2900	Provided	Heavy Load
268,776 VND 228,460 VND	1 Piece(s)	Available	Same day	52	24	-	-	M20×1.5	22.6	48	2400	Provided	Heavy Load
429,808 VND 365,337 VND	1 Piece(s)	Available	18 Day(s)	62	29	-	-	-	34	75	770	Provided	Heavy Load
516,440 VND 438,974 VND	1 Piece(s)	Available	Same day	72	29	-	-	-	36.5	85	787	Provided	Heavy Load
598,105 VND 508,389 VND	1 Piece(s)	Available	18 Day(s)	80	35	-	-	-	49.5	117	1608	Provided	Heavy Load
644,536 VND 547,856 VND	1 Piece(s)	Available	18 Day(s)	85	35	-	With Retainer	-	51	120	1678	Provided	Heavy Load
740,952 VND 629,809 VND	1 Piece(s)	Available	18 Day(s)	90	35	-	With Retainer	-	52	129	1975	Provided	Heavy Load
118,075 VND 100,364 VND	1 Piece(s)	Available	Same day	10	7	M3×0.5	With Retainer	-	1.18	0.94	37600	Not Provided	Regular
110,172 VND 93,646 VND	1 Piece(s)	Available	Same day	12	8	M4×0.7	With Retainer	-	1.65	1.64	29600	Not Provided	Regular
106,632 VND 90,637 VND	1 Piece(s)	Available	Same day	13	9	M5×0.8	With Retainer	-	2.51	2.22	23200	Not Provided	Regular
102,719 VND 87,311 VND	1 Piece(s)	Available	Same day	16	11	M6×1	With Retainer	-	3.15	3.3	14000	Not Provided	Regular
102,761 VND 87,347 VND	1 Piece(s)	Available	Same day	19	11	M8×1.25	With Retainer	-	3.5	3.9	11000	Not Provided	Regular
106,777 VND 90,760 VND	1 Piece(s)	Available	Same day	22	12	-	With Retainer	M10×1	4.5	5.2	8000	Not Provided	Regular
297,097 VND 252,532 VND	1 Piece(s)	Available	Same day	26	12	-	With Retainer	-	4.5	5.2	8000	Not Provided	Regular
118,410 VND 100,649 VND	1 Piece(s)	Available	Same day	30	14	-	With Retainer	M12×1.5	6.8	8.4	5500	Not Provided	Regular
129,981 VND 110,484 VND	1 Piece(s)	Available	Same day	32	14	M3×0.5	With Retainer	M12×1.5	6.8	8.4	5500	Not Provided	Regular
157,229 VND 133,645 VND	1 Piece(s)	Available	Same day	35	18	-	With Retainer	M16×1.5	9.8	14.1	3600	Not Provided	Regular
196,069 VND 166,659 VND	1 Piece(s)	Available	Same day	40	20	-	With Retainer	M18×1.5	10.9	15.5	2900	Not Provided	Regular
289,370 VND 245,965 VND	1 Piece(s)	Available	Same day	52	24	-	With Retainer	M20×1.5	16.7	29	2400	Not Provided	Regular
107,611 VND 91,469 VND	1 Piece(s)	Available	18 Day(s)	10	7	M3×0.5	-	-	2.5	2.61	37600	Not Provided	Heavy Load
107,611 VND 91,469 VND	1 Piece(s)	Available	18 Day(s)	12	8	M4×0.7	-	-	3.5	3.8	29600	Not Provided	Heavy Load
97,056 VND 82,498 VND	1 Piece(s)	Available	18 Day(s)	13	9	M5×0.8	-	-	4.5	5.3	23200	Not Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	16	11	M6×1	-	-	3.15	3.3	14000	Not Provided	Heavy Load
93,567 VND 79,532 VND	1 Piece(s)	Available	Same day	19	11	M8×1.25	-	-	5.4	7.9	11000	Not Provided	Heavy Load
97,056 VND 82,498 VND	1 Piece(s)	Available	Same day	22	12	-	-	M10×1	6.2	9.1	8000	Not Provided	Heavy Load
104,041 VND 88,435 VND	1 Piece(s)	Available	Same day	26	12	-	With Retainer	M10×1	7.3	11.3	8000	Not Provided	Heavy Load
107,611 VND 91,469 VND	1 Piece(s)	Available	18 Day(s)	30	14	-	-	M12×1.5	9.5	14.6	5000	Not Provided	Heavy Load
118,084 VND 100,371 VND	1 Piece(s)	Available	Same day	32	14	-	-	M12×1.5	6.8	8.4	5500	Not Provided	Heavy Load
142,605 VND 121,214 VND	1 Piece(s)	Available	18 Day(s)	35	18	-	-	M16×1.5	9.8	14.1	3600	Not Provided	Heavy Load
177,679 VND 151,027 VND	1 Piece(s)	Available	Same day	40	20	-	-	M18×1.5	10.9	15.5	2900	Not Provided	Heavy Load
261,716 VND 222,459 VND	1 Piece(s)	Available	18 Day(s)	52	24	-	-	M20×1.5	22.6	48	2400	Not Provided	Heavy Load

Loading...Tải…

Product TOP

Basic InformationThông tin cơ bản

Product Category	Cam Followers	Roller Type	Spherical Outer Ring	Tightening Method	Hex Socket on Head
Cam Follower Type	Standard Type	Size Standards	Metric System	Roller Lining	Not Provided
Shaft	Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Mounting Method: Answer:Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Question:Question: Applicable load of cam follower: Answer:Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
Question:Question: Usage difference of different O.D. shapes of outer ring: Answer:Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. D(Ø)

Width B(mm)

Stud Screw Nominal (M)(mm)

Roller Guiding Method

Cam Follower: Stud Screw (Fine Thread)(mm)

Allowable Rotational Speed(rpm)

Seal

Application

type

CADCAD