Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.

Applicable load of cam follower

It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(8 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-CFU12-30

Outer Dia. D Width B Stud Screw Nominal (M) Allowable Rotational Speed Seal type Cam Follower: Stud Screw (Fine Thread) CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Outer Dia. D(Ø)
13

16

19

22

26

30

32

35

40

52
ClearTrống
Width B(mm)
9

11

12

14

18

20

24
ClearTrống
Stud Screw Nominal (M)(mm)
M5×0.8

M6×1

M8×1.25
ClearTrống
Allowable Rotational Speed(rpm)
2400

2900

3600

5500

8000

11000

14000

16240

23200
ClearTrống
Seal
- Not Provided
- Provided
ClearTrống
type
- C-CFU
- C-CFUG
- C-CFUR
- C-CFURG
ClearTrống
Cam Follower: Stud Screw (Fine Thread)(mm)
M10×1

M12×1.5

M16×1.5

M18×1.5

M20×1.5
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

24 Day(s) or Less

54 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Cam Followers Straight Slot, Crown

Name: Cam Followers Straight Slot, Crown
Brand: MISUMI
Availability: InStock

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Until 31/12/2024
Volume Discount

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Products with d ≥ 10 are being gradually switched over to specifications with through holes in the L dimension. Please take this into account prior to purchasing.

Product Description

This is an economy item, The price is cheaper than the MISUMI standard product.

Economy Cam Followers Straight Slot

High Durability Wide Range of Sizes Enhanced Load Capacity

- Made from high-quality SUJ2 material. Ensures long-lasting performance and resistance to wear, making it ideal for heavy-duty applications.

- Available in various outer roller diameters and widths within specified ranges.

- Comes in multiple stud screw sizes.

- Designed to handle high-speed rotation and heavy loads.

- Available in both sealed and non-sealed types. Choose the best option for your environment to prevent intrusion of foreign matter and ensure smooth operation.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Roller Followers Product Overview

Roller Followers Cam bearing is a kind of bearing with shaft, which has its needle roller mounted into the thick-wall outer ring and inner ring, most suitable for the transmission guide rail.
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside. The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation. In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.
Range of Products

Roller Followers Product Feature

1. Equipped with a shaft for easy installation!
2. Ideal for places subject to loads!
3. Also suitable for high speed rotation!

Standard Cam Follower Structure
Standard Cam Structure

Roller Guide Mode
The Roller Followers with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.

With Cage (Standard)	Full Complement Roller Heavy Load Type

Roller Followers Structure of Sealing Part
For the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.

Non-sealed Type	Sealed Type

Outer Ring O.D. Shape
The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Arc Outer Ring	Cylindrical Outer Ring

Slide Rail Load Capacity Comparison

Roller Followers Dimensional Drawing

Specification Table

Roller Followers Related Documents

Product Accuracy (μm)
Allowable Tolerance

Allowable Tolerance of Outer Ring and Allowable Value

Roller Followers Example of Use

Moving Direction
Linear Motion
The surface on the matching side must be flat
and the cam follower moves in a straight line

Swing Direction
The surface on the matching side is curved, and
the cam follower moves in a curve

Attaching Method
Mounting Method

Do not use a hammer to directly hit the flange of the Roller Followers cam bearing during installation, otherwise it will cause poor rotation or fracture. Use a hex socket wrench or a slotted screwdriver.
Secure the hexagon socket or screwdriver slot for fixing, and then turn the nut with a wrench to tighten.

Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Fixing Torque

Roller Followers Precautions

· If the Roller Followers cam follower falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add proper amount of grease to the products that are not filled with grease before use.

Cam Follower Grease Performance and Service Temperature
Grease and Service Temperature

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-CFU12-30SALE
C-CFU12-32SALE
C-CFUG12-30SALE
C-CFUG12-32SALE
C-CFUR12-30SALE
C-CFUR12-32SALE
C-CFURG12-30SALE
C-CFURG12-32SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Outer Dia. D (Ø)	Width B (mm)	Stud Screw Nominal (M) (mm)	Cam Follower: Stud Screw (Fine Thread) (mm)	Basic Load Rating Cr (Dynamic) (kN)	Basic Load Rating Cor (Static) (kN)	Allowable Rotational Speed (rpm)	Seal
118,403 VND 100,643 VND	1 Piece(s)	Available	Same day	30	14	-	M12×1.5	6.8	8.4	5500	Not Provided
129,975 VND 110,479 VND	1 Piece(s)	Available	Same day	32	14	-	M12×1.5	6.8	8.4	5500	Not Provided
107,611 VND 91,469 VND	1 Piece(s)	Available	54 Day(s)	30	14	-	M12×1.5	9.5	14.6	5500	Not Provided
118,084 VND 100,371 VND	1 Piece(s)	Available	54 Day(s)	32	14	-	M12×1.5	10	15.8	5500	Not Provided
122,338 VND 103,987 VND	1 Piece(s)	Available	Same day	30	14	-	M12×1.5	6.8	8.4	5500	Provided
133,841 VND 113,765 VND	1 Piece(s)	Available	Same day	32	14	-	M12×1.5	6.8	8.4	5500	Provided
111,101 VND 94,436 VND	1 Piece(s)	Available	54 Day(s)	30	14	-	M12×1.5	9.5	14.6	5500	Provided
121,577 VND 103,340 VND	1 Piece(s)	Available	24 Day(s)	32	14	-	M12×1.5	10	15.8	5500	Provided

Loading...Tải…

Product TOP

Basic InformationThông tin cơ bản

Product Category	Cam Followers	Roller Type	Spherical Outer Ring	Tightening Method	Standard Type
Cam Follower Type	Standard Type	Size Standards	Metric System	Roller Lining	Not Provided
Shaft	Provided	Roller Guiding Method	With Retainer	Application	Regular

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Mounting Method: Answer:Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Question:Question: Applicable load of cam follower: Answer:Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
Question:Question: Usage difference of different O.D. shapes of outer ring: Answer:Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh