(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Caution
thận trọng
A ball spline with a stepped surface on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
One End Stepped | Spline Shafts[ M ]SUJ2 Equivalent Nut [ M ]SCM415 Equivalent[ H ]Hardness: 58HRC ~ | Spline Shaft, Nut[ M ]Material: SUS440C Equivalent[ H ]Hardness: 55HRC ~ | |
Nut 1 pc. | Nut 2 pcs. | Nut 1 pc. | |
With Round Flange Nut | BSDM | BSD2M | BSDMS |
With Compact Flange Nut | BSDN | BSD2N | - |
With Straight Nut | BSDS | BSD2S | BSDSS |
Part Number | - | L | - | F | - | P |
BSDN10 BSDN10G BSDN10L | - - - | 300 300 300 | - - - | F20 F20 F20 | - - - | P6 P6 P6 |
Part Number | 1mm Increment | P Selection | D | (Y) | Mass (kg/m) | |||||||||||||||
Type | No. | L | F | 1-Nut Type | 2-Nut Type | |||||||||||||||
1-Nut Type | 2-Nut Type | min~max | min~max | |||||||||||||||||
BSDM BSDN BSDS BSD2M BSD2N BSD2S BSDMS BSDSS | *6 | 60~400(190) | 60~400 | When P=3 2≤F≤9 When P=4 2≤F≤16 When P≥5 2≤F≤Px5 | 3 | 4 | 5 | 6 | 58~398(188) | 58~398 | 0.23 | |||||||||
*8 | 60~400(190) | 60~400 | 4 | 5 | 6 | 8 | 58~398(188) | 58~398 | 0.39 | |||||||||||
*10 | 60~600(390) | 90~600 | 4 | 5 | 6 | 8 | 10.4 | 58~598(388) | 88~598 | 0.65 | ||||||||||
*13 | 60~600(390) | 100~600 | 5 | 6 | 8 | 10 | 13.4 | 58~598(388) | 98~598 | 1.11 | ||||||||||
*16 | 70~600(390) | 110~600 | 5 | 6 | 8 | 10 | 12 | 13 | 16.6 | 68~598(388) | 108~598 | 1.65 | ||||||||
20 | 80~ 700 | 130~700 | 8 | 10 | 12 | 13 | 15 | 16 | 20.6 | 78~898 | 128~698 | 2.57 | ||||||||
25 | 90~ 900 | 150~900 | 8 | 10 | 12 | 13 | 15 | 16 | 20 | 25.8 | 88~898 | 148~898 | 4.04 | |||||||
30 | 100~1150 | 170~1150 | 10 | 12 | 13 | 15 | 16 | 20 | 25 | 30.8 | 98~1148 | 168~1148 | 5.85 |
No. | D (h6) | L | Df | H | P.C.D. | d1 | d2 | h | W | d | B | Basic Rated Torque | Basic Load Rating | Allowable Static Moment | Mass (kg) | |||
Dynamic Ct (N • m) | Static C0t (N • m) | Dynamic C (kN) | Static C0 (kN) | M01 (N • m) | M02 (N • m) | |||||||||||||
6 | 14 | 25 | 30 | 6 | 22 | 3.5 | 6 | 3.1 | 6.5 | 1.5 | 18 | 3.8 | 7 | 1.2 | 2.1 | 5 | 36 | 0.03 |
8 | 16 | 32 | 24 | 21 | 4.8 | 8.7 | 1.2 | 2.1 | 5 | 36 | 0.04 | |||||||
10 | 21 | 40(33) | 42(41) | 6(8) | 32(30) | 4.5 | 8 | 4.4(5.3) | 14(8.5) | 25 | 19(11) | 34(21) | 3.8(2.4) | 6.9(4.3) | 26(15) | 181(102) | 0.09 | |
13 | 24 | 44(36) | 44(45) | 7(8) | 33(34) | 15(10) | - | 28(20) | 52(37) | 4.6(3.3) | 8.3(5.9) | 36(22) | 251(148) | 0.11 | ||||
16 | 31 | 50 | 51 | 7 | 40 | 4.4 | 18 | 51 | 93 | 6.2 | 11.1 | 56 | 386 | 0.2 | ||||
20 | 35 | 63 | 58 | 9 | 45 | 5.5 | 9.5 | 5.4 | 22.5 | 2 | 85 | 154 | 8.5 | 15.3 | 83 | 611 | 0.3 | |
25 | 42 | 71 | 65 | 52 | 26.5 | 193 | 348 | 15.4 | 27.7 | 173 | 1248 | 0.4 | ||||||
30 | 47 | 80 | 75 | 10 | 60 | 6.6 | 11 | 6.5 | 30 | 2.5 | 272 | 490 | 18.5 | 33.3 | 212 | 1581 | 0.57 |
No. | D (h6) | L | b | t (+0.05( 0 | d | α | Basic Rated Torque | Basic Load Rating | Allowable Static Moment | Mass (kg) | Dimensions of Key (Included) | |||||||||
Tolerance | Dynamic Ct (N • m) | Static C0t (N • m) | Dynamic C (kN) | Static C0 (kN) | M01 (N • m) | M02 (N • m) | B | h | L1 | R | ||||||||||
Tolerance | Tolerance | |||||||||||||||||||
6 | 14 | 25 | 2.5 | +0.014 0 | 1.2 | 1.5 | 15° | 3.8 | 7 | 1.2 | 2.1 | 5 | 36 | 0.012 | 2.5 | +0.016 +0.006 | 2.5 | 0 -0.025 | 10.5 | 1.25 |
8 | 16 | 25° | 4.8 | 8.7 | 1.2 | 2.1 | 5 | 36 | 0.013 | 10.5 | ||||||||||
10 | 21 | 40(33) | 3 | 1.5 | - | 19(11) | 34(21) | 3.8(2.4) | 6.9(4.3) | 26(15) | 181(102) | 0.06 | 3 | 3 | 17(14) | 1.5 | ||||
13 | 24 | 44(36) | 28(20) | 52(37) | 4.6(3.3) | 8.3(5.9) | 36(22) | 251(148) | 0.07 | 17(14) | ||||||||||
16 | 31 | 50 | 3.5 | +0.018 0 | 2 | 51 | 93 | 6.2 | 11.1 | 56 | 386 | 0.15 | 3.5 | +0.024 +0.012 | 3.5 | 0 -0.030 | 18 | 1.75 | ||
20 | 35 | 63 | 4 | 2.5 | 2 | 85 | 154 | 8.5 | 15.3 | 83 | 611 | 0.2 | 4 | 4 | 29 | 2 | ||||
25 | 42 | 71 | 193 | 348 | 15.4 | 27.7 | 173 | 1248 | 0.29 | 33 | ||||||||||
30 | 47 | 80 | 2.5 | 272 | 490 | 18.5 | 33.3 | 212 | 1581 | 0.37 | 42 |
Part Number |
---|
BSD2M6-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2M6G-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2M6L-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2M8-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2M8G-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2M8L-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2M10-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2M10G-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2M10L-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2M13-[100-600/1]-F[2-50/1]-P[5,6,8,10] |
BSD2M13G-[100-600/1]-F[2-50/1]-P[5,6,8,10] |
BSD2M13L-[100-600/1]-F[2-50/1]-P[5,6,8,10] |
BSD2M16-[110-600/1]-F[2-65/1]-P[5,6,8,10,12,13] |
BSD2M16G-[110-600/1]-F[2-65/1]-P[5,6,8,10,12,13] |
BSD2M16L-[110-600/1]-F[2-65/1]-P[5,6,8,10,12,13] |
BSD2M20-[130-700/1]-F[2-80/1]-P[8,10,12,13,15,16] |
BSD2M20G-[130-700/1]-F[2-80/1]-P[8,10,12,13,15,16] |
BSD2M20L-[130-700/1]-F[2-80/1]-P[8,10,12,13,15,16] |
BSD2M25-[150-900/1]-F[2-100/1]-P[8,10,12,13,15,16,20] |
BSD2M25G-[150-900/1]-F[2-100/1]-P[8,10,12,13,15,16,20] |
BSD2M25L-[150-900/1]-F[2-100/1]-P[8,10,12,13,15,16,20] |
BSD2M30-[170-1150/1]-F[2-125/1]-P[10,12,13,15,16,20,25] |
BSD2M30G-[170-1150/1]-F[2-125/1]-P[10,12,13,15,16,20,25] |
BSD2M30L-[170-1150/1]-F[2-125/1]-P[10,12,13,15,16,20,25] |
BSD2N6-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2N6G-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2N6L-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2N8-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2N8G-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2N8L-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2N10-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2N10G-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2N10L-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2S6-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2S6G-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2S6L-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSD2S8-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2S8G-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2S8L-[60-400/1]-F[2-30/1]-P[4,5,6] |
BSD2S10-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2S10G-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2S10L-[90-600/1]-F[2-40/1]-P[4,5,6,8] |
BSD2S13-[100-600/1]-F[2-50/1]-P[5,6,8,10] |
BSD2S13G-[100-600/1]-F[2-50/1]-P[5,6,8,10] |
BSD2S13L-[100-600/1]-F[2-50/1]-P[5,6,8,10] |
BSD2S16-[110-600/1]-F[2-65/1]-P[5,6,8,10,12,13] |
BSD2S16G-[110-600/1]-F[2-65/1]-P[5,6,8,10,12,13] |
BSD2S16L-[110-600/1]-F[2-65/1]-P[5,6,8,10,12,13] |
BSD2S20-[130-700/1]-F[2-80/1]-P[8,10,12,13,15,16] |
BSD2S20G-[130-700/1]-F[2-80/1]-P[8,10,12,13,15,16] |
BSD2S20L-[130-700/1]-F[2-80/1]-P[8,10,12,13,15,16] |
BSD2S25-[150-900/1]-F[2-100/1]-P[8,10,12,13,15,16,20] |
BSD2S25G-[150-900/1]-F[2-100/1]-P[8,10,12,13,15,16,20] |
BSD2S25L-[150-900/1]-F[2-100/1]-P[8,10,12,13,15,16,20] |
BSD2S30-[170-1150/1]-F[2-125/1]-P[10,12,13,15,16,20,25] |
BSD2S30G-[170-1150/1]-F[2-125/1]-P[10,12,13,15,16,20,25] |
BSD2S30L-[170-1150/1]-F[2-125/1]-P[10,12,13,15,16,20,25] |
BSDM6-[60-400/1]-F[2-25/1]-P[3,4,5] |
BSDM6G-[60-400/1]-F[2-9/1]-P[3,4,5] |
BSDM6L-[60-400/1]-F[2-9/1]-P[3,4,5] |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Nut Type | Shaft Outer Dia. D (Ø) | Nut Overall Length (mm) | Nut O.D. (Ø) | Shaft material | Shaft Overall Length L (mm) | Basic Load Rating: Dynamic Load (N) | Allowable Torque (N•m) | Nut Material | Grease | F (mm) | P (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | Standard (S2) | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | LG2 | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | ET-100K | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | Standard (S2) | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | LG2 | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | ET-100K | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 90 ~ 600 | 3800 | 19 | SCM415 Equivalent | Standard (S2) | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 90 ~ 600 | 3800 | 19 | SCM415 Equivalent | LG2 | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 10.4 | 33 | 21 | SUJ2 Equivalent | 90 ~ 600 | 2400 | 11 | SCM415 Equivalent | ET-100K | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 44 | 24 | SUJ2 Equivalent | 100 ~ 600 | 4600 | 28 | SCM415 Equivalent | Standard (S2) | 2 ~ 50 | 5 ~ 10 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 44 | 24 | SUJ2 Equivalent | 100 ~ 600 | 4600 | 28 | SCM415 Equivalent | LG2 | 2 ~ 50 | 5 ~ 10 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 13.4 | 36 | 24 | SUJ2 Equivalent | 100 ~ 600 | 3300 | 20 | SCM415 Equivalent | ET-100K | 2 ~ 50 | 5 ~ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUJ2 Equivalent | 110 ~ 600 | 6200 | 51 | SCM415 Equivalent | Standard (S2) | 2 ~ 65 | 5 ~ 13 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUJ2 Equivalent | 110 ~ 600 | 6200 | 51 | SCM415 Equivalent | LG2 | 2 ~ 65 | 5 ~ 13 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 16.6 | 50 | 31 | SUJ2 Equivalent | 110 ~ 600 | 6200 | 51 | SCM415 Equivalent | ET-100K | 2 ~ 65 | 5 ~ 13 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 20.6 | 63 | 35 | SUJ2 Equivalent | 130 ~ 700 | 8500 | 85 | SCM415 Equivalent | Standard (S2) | 2 ~ 80 | 8 ~ 16 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 20.6 | 63 | 35 | SUJ2 Equivalent | 130 ~ 700 | 8500 | 85 | SCM415 Equivalent | LG2 | 2 ~ 80 | 8 ~ 16 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 20.6 | 63 | 35 | SUJ2 Equivalent | 130 ~ 700 | 8500 | 85 | SCM415 Equivalent | ET-100K | 2 ~ 80 | 8 ~ 16 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 25.8 | 71 | 42 | SUJ2 Equivalent | 150 ~ 900 | 15400 | 193 | SCM415 Equivalent | Standard (S2) | 2 ~ 100 | 8 ~ 20 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 25.8 | 71 | 42 | SUJ2 Equivalent | 150 ~ 900 | 15400 | 193 | SCM415 Equivalent | LG2 | 2 ~ 100 | 8 ~ 20 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 25.8 | 71 | 42 | SUJ2 Equivalent | 150 ~ 900 | 15400 | 193 | SCM415 Equivalent | ET-100K | 2 ~ 100 | 8 ~ 20 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 30.8 | 80 | 47 | SUJ2 Equivalent | 170 ~ 1150 | 18500 | 272 | SCM415 Equivalent | Standard (S2) | 2 ~ 125 | 10 ~ 25 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 30.8 | 80 | 47 | SUJ2 Equivalent | 170 ~ 1150 | 18500 | 272 | SCM415 Equivalent | LG2 | 2 ~ 125 | 10 ~ 25 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 30.8 | 80 | 47 | SUJ2 Equivalent | 170 ~ 1150 | 18500 | 272 | SCM415 Equivalent | ET-100K | 2 ~ 125 | 10 ~ 25 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Compact Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | Standard (S2) | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | LG2 | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | ET-100K | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Compact Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | Standard (S2) | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | LG2 | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | ET-100K | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Compact Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 90 ~ 600 | 3800 | 19 | SCM415 Equivalent | Standard (S2) | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 90 ~ 600 | 3800 | 19 | SCM415 Equivalent | LG2 | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Compact Flange | 10.4 | 40 | 21 | SUJ2 Equivalent | 90 ~ 600 | 2400 | 11 | SCM415 Equivalent | ET-100K | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | Standard (S2) | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | LG2 | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | ET-100K | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | Standard (S2) | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | LG2 | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 4.8 | SCM415 Equivalent | ET-100K | 2 ~ 30 | 4 ~ 6 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 90 ~ 600 | 3800 | 19 | SCM415 Equivalent | Standard (S2) | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 90 ~ 600 | 3800 | 19 | SCM415 Equivalent | LG2 | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 90 ~ 600 | 2400 | 19 | SCM415 Equivalent | ET-100K | 2 ~ 40 | 4 ~ 8 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 13.4 | 44 | 24 | SUJ2 Equivalent | 100 ~ 600 | 4600 | 28 | SCM415 Equivalent | Standard (S2) | 2 ~ 50 | 5 ~ 10 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 13.4 | 44 | 24 | SUJ2 Equivalent | 100 ~ 600 | 4600 | 28 | SCM415 Equivalent | LG2 | 2 ~ 50 | 5 ~ 10 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 13.4 | 36 | 24 | SUJ2 Equivalent | 100 ~ 600 | 3300 | 20 | SCM415 Equivalent | ET-100K | 2 ~ 50 | 5 ~ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 110 ~ 600 | 6200 | 51 | SCM415 Equivalent | Standard (S2) | 2 ~ 65 | 5 ~ 13 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 110 ~ 600 | 6200 | 51 | SCM415 Equivalent | LG2 | 2 ~ 65 | 5 ~ 13 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 110 ~ 600 | 6200 | 51 | SCM415 Equivalent | ET-100K | 2 ~ 65 | 5 ~ 13 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 130 ~ 700 | 8500 | 85 | SCM415 Equivalent | Standard (S2) | 2 ~ 80 | 8 ~ 16 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 130 ~ 700 | 8500 | 85 | SCM415 Equivalent | LG2 | 2 ~ 80 | 8 ~ 16 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 130 ~ 700 | 8500 | 85 | SCM415 Equivalent | ET-100K | 2 ~ 80 | 8 ~ 16 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 150 ~ 900 | 15400 | 193 | SCM415 Equivalent | Standard (S2) | 2 ~ 100 | 8 ~ 20 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 150 ~ 900 | 15400 | 193 | SCM415 Equivalent | LG2 | 2 ~ 100 | 8 ~ 20 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 150 ~ 900 | 15400 | 193 | SCM415 Equivalent | ET-100K | 2 ~ 100 | 8 ~ 20 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 170 ~ 1150 | 18500 | 272 | SCM415 Equivalent | Standard (S2) | 2 ~ 125 | 10 ~ 25 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 170 ~ 1150 | 18500 | 272 | SCM415 Equivalent | LG2 | 2 ~ 125 | 10 ~ 25 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 170 ~ 1150 | 18500 | 272 | SCM415 Equivalent | ET-100K | 2 ~ 125 | 10 ~ 25 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | [Flanged Type] Round Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | Standard (S2) | 2 ~ 25 | 3 ~ 5 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | LG2 | 2 ~ 9 | 3 ~ 5 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | [Flanged Type] Round Flange | 6 | 25 | 14 | SUJ2 Equivalent | 60 ~ 400 | 1200 | 3.8 | SCM415 Equivalent | ET-100K | 2 ~ 9 | 3 ~ 5 |
Loading...Tải…
Type | Solid Shaft | Nut Length | Standard | Preload | Standard |
---|---|---|---|---|---|
Accuracy Grade | Standard Grade | End Shape (Left) | Stepped | End Shape (Right) | Standard |
Torque | Middle Torque | Ball Recirculating Type | Single |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy