(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
This is a single-stage core pin with a lapped tip and specified shaft diameter (P).
Part Number |
---|
L-CPHB-1DT2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-99/0.01]-A[1-2.48/0.01]-V[1-2.48/0.01]-C[0.1-0.7/0.1]-K[10-45/1]-S[0.1-30/0.1] |
L-CPHB-1DT2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-99/0.01]-A[1-2.48/0.01]-V[1-2.48/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-30/0.1] |
L-CPHB-1DT3-[12-100/0.01]-P[2.5-2.99/0.01]-F[10-99/0.01]-A[1-2.98/0.01]-V[1-2.98/0.01]-C[0.1-0.9/0.1]-K[10-45/1]-S[0.1-35/0.1] |
L-CPHB-1DT3-[12-100/0.01]-P[2.5-2.99/0.01]-F[10-99/0.01]-A[1-2.98/0.01]-V[1-2.98/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-35/0.1] |
L-CPHB-1DT3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-V[1-3.49/0.01]-C[0.1-1.3/0.1]-K[10-45/1]-S[0.1-40/0.1] |
L-CPHB-1DT3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-V[1-3.49/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-40/0.1] |
L-CPHB-1DT3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-VC[0.7-0.99/0.01]-C[0.1-1.3/0.1]-K[10-45/1]-S[0.1-40/0.1] |
L-CPHB-1DT3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-VC[0.7-0.99/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-40/0.1] |
L-CPHB-1DT4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119/0.01]-A[0.7-3.98/0.01]-V[1-3.98/0.01]-C[0.1-1.6/0.1]-K[10-45/1]-S[0.1-40/0.1] |
L-CPHB-1DT4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119/0.01]-A[0.7-3.98/0.01]-V[1-3.98/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-40/0.1] |
L-CPHB-1DT4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119/0.01]-A[0.7-3.98/0.01]-VC[0.7-0.99/0.01]-C[0.1-1.6/0.1]-K[10-45/1]-S[0.1-40/0.1] |
L-CPHB-1DT4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119/0.01]-A[0.7-3.98/0.01]-VC[0.7-0.99/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-40/0.1] |
L-CPHB-1DT4.5-[12-120/0.01]-P[4-4.49/0.01]-F[10-119/0.01]-A[1-4.48/0.01]-V[1-4.48/0.01]-C[0.1-1.7/0.1]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT4.5-[12-120/0.01]-P[4-4.49/0.01]-F[10-119/0.01]-A[1-4.48/0.01]-V[1-4.48/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT5-[12-120/0.01]-P[4.5-4.99/0.01]-F[10-119/0.01]-A[1-4.98/0.01]-V[1-4.98/0.01]-C[0.1-1.9/0.1]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT5-[12-120/0.01]-P[4.5-4.99/0.01]-F[10-119/0.01]-A[1-4.98/0.01]-V[1-4.98/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-V[1.5-5.48/0.01]-C[0.1-2.2/0.1]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-V[1.5-5.48/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-C[0.1-2.2/0.1]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-V[2-5.99/0.01]-C[0.1-2.2/0.1]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-V[2-5.99/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-VC[1.5-1.99/0.01]-C[0.1-2.2/0.1]-K[10-45/1]-S[0.1-50/0.1] |
L-CPHB-1DT6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-VC[1.5-1.99/0.01]-CVC[0.05-1/0.01]-K[10-45/1]-S[0.1-50/0.1] |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | No. (Nominal diameter) (mm) | RE (R shape alteration・enlargement) (mm) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | Q (Tip R chamfering) (mm) | R (Step type R) (mm) | S (Tip tapered width) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration, smaller than V min) (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 2 ~ 2.49 | 1D | T | 2.5 | - | 1 ~ 2.48 | 0.1 ~ 0.7 | - | 10 ~ 99 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 30 | 1 ~ 2.48 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 2 ~ 2.49 | 1D | T | 2.5 | - | 1 ~ 2.48 | - | 0.05 ~ 1 | 10 ~ 99 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 30 | 1 ~ 2.48 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 2.5 ~ 2.99 | 1D | T | 3 | - | 1 ~ 2.98 | 0.1 ~ 0.9 | - | 10 ~ 99 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 35 | 1 ~ 2.98 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 2.5 ~ 2.99 | 1D | T | 3 | - | 1 ~ 2.98 | - | 0.05 ~ 1 | 10 ~ 99 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 35 | 1 ~ 2.98 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3 ~ 3.49 | 1D | T | 3.5 | - | 0.7 ~ 3.49 | 0.1 ~ 1.3 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 40 | 1 ~ 3.49 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3 ~ 3.49 | 1D | T | 3.5 | - | 0.7 ~ 3.49 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 40 | 1 ~ 3.49 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3 ~ 3.49 | 1D | T | 3.5 | - | 0.7 ~ 3.49 | 0.1 ~ 1.3 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 40 | - | 0.7 ~ 0.99 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3 ~ 3.49 | 1D | T | 3.5 | - | 0.7 ~ 3.49 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 40 | - | 0.7 ~ 0.99 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 ~ 3.99 | 1D | T | 4 | - | 0.7 ~ 3.98 | 0.1 ~ 1.6 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 40 | 1 ~ 3.98 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 ~ 3.99 | 1D | T | 4 | - | 0.7 ~ 3.98 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 40 | 1 ~ 3.98 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 ~ 3.99 | 1D | T | 4 | - | 0.7 ~ 3.98 | 0.1 ~ 1.6 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 40 | - | 0.7 ~ 0.99 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 ~ 3.99 | 1D | T | 4 | - | 0.7 ~ 3.98 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 40 | - | 0.7 ~ 0.99 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4 ~ 4.49 | 1D | T | 4.5 | - | 1 ~ 4.48 | 0.1 ~ 1.7 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | 1 ~ 4.48 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4 ~ 4.49 | 1D | T | 4.5 | - | 1 ~ 4.48 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | 1 ~ 4.48 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4.5 ~ 4.99 | 1D | T | 5 | - | 1 ~ 4.98 | 0.1 ~ 1.9 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | 1 ~ 4.98 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4.5 ~ 4.99 | 1D | T | 5 | - | 1 ~ 4.98 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | 1 ~ 4.98 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5 ~ 5.49 | 1D | T | 5.5 | - | 1 ~ 5.48 | 0.1 ~ 2.2 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | 1.5 ~ 5.48 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5 ~ 5.49 | 1D | T | 5.5 | - | 1 ~ 5.48 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | 1.5 ~ 5.48 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5 ~ 5.49 | 1D | T | 5.5 | - | 1 ~ 5.48 | 0.1 ~ 2.2 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | - | 1 ~ 1.49 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5 ~ 5.49 | 1D | T | 5.5 | - | 1 ~ 5.48 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | - | 1 ~ 1.49 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 ~ 5.99 | 1D | T | 6 | - | 1.5 ~ 5.99 | 0.1 ~ 2.2 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | 2 ~ 5.99 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 ~ 5.99 | 1D | T | 6 | - | 1.5 ~ 5.99 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | 2 ~ 5.99 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 ~ 5.99 | 1D | T | 6 | - | 1.5 ~ 5.99 | 0.1 ~ 2.2 | - | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | - | 1.5 ~ 1.99 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 ~ 5.99 | 1D | T | 6 | - | 1.5 ~ 5.99 | - | 0.05 ~ 1 | 10 ~ 119 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 50 | - | 1.5 ~ 1.99 |
Loading...Tải…
Shape type | One-step | Surface treatment | Tip lapped | Head thickness | 4mm(T4) |
---|---|---|---|---|---|
Step (Step shape of the second step) | No second step |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy