(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(816 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

L-CPD-1A1.5-[12-100/0.01]-F[10-99/0.01]-V[1-1.49/0.01]

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material
- SKH51
- SKD61
ClearTrống
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
ClearTrống
Tip gradient tolerance
- ±0.01
- ±0.015
ClearTrống
D/P (Shaft diameter)(mm)
1.5

2

2.5

3

3.5

4

4.5

5

5.5

6
ClearTrống
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
- 1E
ClearTrống
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
ClearTrống
RE (R shape alteration・enlargement)(mm)
[0.5-2/0.5mm Unit(s)]
ClearTrống
A (Step shape diameter)(mm)
[0.4-5.99/0.01mm Unit(s)]
ClearTrống
C (Step type taper width)(mm)
[0.1-2.2/0.1mm Unit(s)]
ClearTrống
CVC (Designation of C dimension in increments of 0.01mm)(mm)
[0.5-1/0.01mm Unit(s)]
ClearTrống
F (Bearing bore length)(mm)
[10-119/0.01mm Unit(s)]
ClearTrống
G (Tip C chamfering width)(mm)
[0.5-2.9/0.1mm Unit(s)]
ClearTrống
K (Tip angle)(°)
[10-45/1° Unit(s)]
ClearTrống
L (L dimension)(mm)
[12-120/0.01mm Unit(s)]
ClearTrống
Q (Tip R chamfering)(mm)
[0.2-2.9/0.1mm Unit(s)]
ClearTrống
R (Step type R)(mm)
0.2
[0.2-2.2/0.1mm Unit(s)]
ClearTrống
S (Tip tapered width)(mm)
[0.1-50/0.1mm Unit(s)]
ClearTrống
V (Tip diameter)(mm)
[0.5-5.99/0.01mm Unit(s)]
ClearTrống
VC (V dimension alteration, smaller than V min)(mm)
[0.6-1.99/0.01mm Unit(s)]
ClearTrống
type
- L-CPD-1A
- L-CPD-1AB
- L-CPD-1AC
- L-CPD-1AG
- L-CPD-1AR
- L-CPD-1AT
- L-CPD-1B
- L-CPD-1BB
- L-CPD-1BC
- L-CPD-1BG
- L-CPD-1BR
- L-CPD-1BT
- L-CPD-1C
- L-CPD-1CB
- L-CPD-1CC
- L-CPD-1CG
- L-CPD-1CR
- L-CPD-1CT
- L-CPD-1D
- L-CPD-1DB
- L-CPD-1DC
- L-CPD-1DG
- L-CPD-1DR
- L-CPD-1DT
- L-CPD-1E
- L-CPD-1EB
- L-CPD-1EC
- L-CPD-1EG
- L-CPD-1ER
- L-CPD-1ET
- L-CPH-1A
- L-CPH-1AB
- L-CPH-1AC
- L-CPH-1AG
- L-CPH-1AR
- L-CPH-1AT
- L-CPH-1B
- L-CPH-1BB
- L-CPH-1BC
- L-CPH-1BG
- L-CPH-1BR
- L-CPH-1BT
- L-CPH-1C
- L-CPH-1CB
- L-CPH-1CC
- L-CPH-1CG
- L-CPH-1CR
- L-CPH-1CT
- L-CPH-1D
- L-CPH-1DB
- L-CPH-1DC
- L-CPH-1DG
- L-CPH-1DR
- L-CPH-1DT
- L-CPH-1E
- L-CPH-1EB
- L-CPH-1EC
- L-CPH-1EG
- L-CPH-1ER
- L-CPH-1ET
ClearTrống
L dimension tolerance
- +0.02/0
- 0/-0.1
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

6 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

One-Step Core Pins -Tip Lapped・Shaft Diameter (D) Selection Type-

Name: One-Step Core Pins -Tip Lapped・Shaft Diameter (D) Selection Type-
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

L-CPD-1A1.5-[12-100/0.01]-F[10-99/0.01]-V[1-1.49/0.01]

L-CPD-1A1.5-[12-100/0.01]-F[10-99/0.01]-VC[0.6-0.99/0.01]

L-CPD-1A2-[12-100/0.01]-F[10-99/0.01]-V[1-1.99/0.01]

L-CPD-1A2.5-[12-100/0.01]-F[10-99/0.01]-V[0.5-2.49/0.01]

L-CPD-1A3-[12-100/0.01]-F[10-99/0.01]-V[1-2.99/0.01]

L-CPD-1A3.5-[12-120/0.01]-F[10-119/0.01]-V[1-3.49/0.01]

L-CPD-1A3.5-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]

L-CPD-1A4-[12-120/0.01]-F[10-119/0.01]-V[1-3.99/0.01]

L-CPD-1A4-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]

L-CPD-1A4.5-[12-120/0.01]-F[10-119/0.01]-V[1-4.49/0.01]

L-CPD-1A5-[12-120/0.01]-F[10-119/0.01]-V[1-4.99/0.01]

L-CPD-1A5.5-[12-120/0.01]-F[10-119/0.01]-V[1.5-5.49/0.01]

L-CPD-1A5.5-[12-120/0.01]-F[10-119/0.01]-VC[1-1.49/0.01]

L-CPD-1A6-[12-120/0.01]-F[10-119/0.01]-V[2-5.99/0.01]

L-CPD-1A6-[12-120/0.01]-F[10-119/0.01]-VC[1.5-1.99/0.01]

L-CPD-1AC1.5-[12-100/0.01]-F[10-99/0.01]-V[1-1.49/0.01]-G[0.5-0.7/0.1]

L-CPD-1AC1.5-[12-100/0.01]-F[10-99/0.01]-VC[0.6-0.99/0.01]-G[0.5-0.7/0.1]

L-CPD-1AC2-[12-100/0.01]-F[10-99/0.01]-V[1-1.99/0.01]-G[0.5-0.9/0.1]

L-CPD-1AC2.5-[12-100/0.01]-F[10-99/0.01]-V[0.5-2.49/0.01]-G[0.5-1.2/0.1]

L-CPD-1AC3-[12-100/0.01]-F[10-99/0.01]-V[1-2.99/0.01]-G[0.5-1.4/0.1]

L-CPD-1A1.5-[12-100/0.01]-F[10-99/0.01]-V[1-1.49/0.01]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

This is a single-stage core pin with a lapped tip and fixed shaft diameter (D).

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
L-CPD-1A1.5-[12-100/0.01]-F[10-99/0.01]-V[1-1.49/0.01]
L-CPD-1A1.5-[12-100/0.01]-F[10-99/0.01]-VC[0.6-0.99/0.01]
L-CPD-1A2-[12-100/0.01]-F[10-99/0.01]-V[1-1.99/0.01]
L-CPD-1A2.5-[12-100/0.01]-F[10-99/0.01]-V[0.5-2.49/0.01]
L-CPD-1A3-[12-100/0.01]-F[10-99/0.01]-V[1-2.99/0.01]
L-CPD-1A3.5-[12-120/0.01]-F[10-119/0.01]-V[1-3.49/0.01]
L-CPD-1A3.5-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]
L-CPD-1A4-[12-120/0.01]-F[10-119/0.01]-V[1-3.99/0.01]
L-CPD-1A4-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]
L-CPD-1A4.5-[12-120/0.01]-F[10-119/0.01]-V[1-4.49/0.01]
L-CPD-1A5-[12-120/0.01]-F[10-119/0.01]-V[1-4.99/0.01]
L-CPD-1A5.5-[12-120/0.01]-F[10-119/0.01]-V[1.5-5.49/0.01]
L-CPD-1A5.5-[12-120/0.01]-F[10-119/0.01]-VC[1-1.49/0.01]
L-CPD-1A6-[12-120/0.01]-F[10-119/0.01]-V[2-5.99/0.01]
L-CPD-1A6-[12-120/0.01]-F[10-119/0.01]-VC[1.5-1.99/0.01]
L-CPD-1AC1.5-[12-100/0.01]-F[10-99/0.01]-V[1-1.49/0.01]-G[0.5-0.7/0.1]
L-CPD-1AC1.5-[12-100/0.01]-F[10-99/0.01]-VC[0.6-0.99/0.01]-G[0.5-0.7/0.1]
L-CPD-1AC2-[12-100/0.01]-F[10-99/0.01]-V[1-1.99/0.01]-G[0.5-0.9/0.1]
L-CPD-1AC2.5-[12-100/0.01]-F[10-99/0.01]-V[0.5-2.49/0.01]-G[0.5-1.2/0.1]
L-CPD-1AC3-[12-100/0.01]-F[10-99/0.01]-V[1-2.99/0.01]-G[0.5-1.4/0.1]
L-CPD-1AC3.5-[12-120/0.01]-F[10-119/0.01]-V[1-3.49/0.01]-G[0.5-1.7/0.1]
L-CPD-1AC3.5-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]-G[0.5-1.7/0.1]
L-CPD-1AC4-[12-120/0.01]-F[10-119/0.01]-V[1-3.99/0.01]-G[0.5-1.9/0.1]
L-CPD-1AC4-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]-G[0.5-1.9/0.1]
L-CPD-1AC4.5-[12-120/0.01]-F[10-119/0.01]-V[1-4.49/0.01]-G[0.5-2.2/0.1]
L-CPD-1AC5-[12-120/0.01]-F[10-119/0.01]-V[1-4.99/0.01]-G[0.5-2.4/0.1]
L-CPD-1AC5.5-[12-120/0.01]-F[10-119/0.01]-V[1.5-5.49/0.01]-G[0.5-2.7/0.1]
L-CPD-1AC5.5-[12-120/0.01]-F[10-119/0.01]-VC[1-1.49/0.01]-G[0.5-2.7/0.1]
L-CPD-1AC6-[12-120/0.01]-F[10-119/0.01]-V[2-5.99/0.01]-G[0.5-2.9/0.1]
L-CPD-1AC6-[12-120/0.01]-F[10-119/0.01]-VC[1.5-1.99/0.01]-G[0.5-2.9/0.1]
L-CPD-1AR1.5-[12-100/0.01]-F[10-99/0.01]-V[1-1.49/0.01]-Q[0.2-0.7/0.1]
L-CPD-1AR1.5-[12-100/0.01]-F[10-99/0.01]-VC[0.6-0.99/0.01]-Q[0.2-0.7/0.1]
L-CPD-1AR2-[12-100/0.01]-F[10-99/0.01]-V[1-1.99/0.01]-Q[0.2-0.9/0.1]
L-CPD-1AR2.5-[12-100/0.01]-F[10-99/0.01]-V[0.5-2.49/0.01]-Q[0.2-1.2/0.1]
L-CPD-1AR3-[12-100/0.01]-F[10-99/0.01]-V[1-2.99/0.01]-Q[0.2-1.4/0.1]
L-CPD-1AR3.5-[12-120/0.01]-F[10-119/0.01]-V[1-3.49/0.01]-Q[0.2-1.7/0.1]
L-CPD-1AR3.5-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]-Q[0.2-1.7/0.1]
L-CPD-1AR4-[12-120/0.01]-F[10-119/0.01]-V[1-3.99/0.01]-Q[0.2-1.9/0.1]
L-CPD-1AR4-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]-Q[0.2-1.9/0.1]
L-CPD-1AR4.5-[12-120/0.01]-F[10-119/0.01]-V[1-4.49/0.01]-Q[0.2-2.2/0.1]
L-CPD-1AR5-[12-120/0.01]-F[10-119/0.01]-V[1-4.99/0.01]-Q[0.2-2.4/0.1]
L-CPD-1AR5.5-[12-120/0.01]-F[10-119/0.01]-V[1.5-5.49/0.01]-Q[0.2-2.7/0.1]
L-CPD-1AR5.5-[12-120/0.01]-F[10-119/0.01]-VC[1-1.49/0.01]-Q[0.2-2.7/0.1]
L-CPD-1AR6-[12-120/0.01]-F[10-119/0.01]-V[2-5.99/0.01]-Q[0.2-2.9/0.1]
L-CPD-1AR6-[12-120/0.01]-F[10-119/0.01]-VC[1.5-1.99/0.01]-Q[0.2-2.9/0.1]
L-CPD-1AT1.5-[12-100/0.01]-F[10-99/0.01]-V[1-1.49/0.01]-K[10-45/1]-S[0.1-20/0.1]
L-CPD-1AT1.5-[12-100/0.01]-F[10-99/0.01]-VC[0.6-0.99/0.01]-K[10-45/1]-S[0.1-20/0.1]
L-CPD-1AT2-[12-100/0.01]-F[10-99/0.01]-V[1-1.99/0.01]-K[10-45/1]-S[0.1-25/0.1]
L-CPD-1AT2.5-[12-100/0.01]-F[10-99/0.01]-V[0.5-2.49/0.01]-K[10-45/1]-S[0.1-30/0.1]
L-CPD-1AT3-[12-100/0.01]-F[10-99/0.01]-V[1-2.99/0.01]-K[10-45/1]-S[0.1-35/0.1]
L-CPD-1AT3.5-[12-120/0.01]-F[10-119/0.01]-V[1-3.49/0.01]-K[10-45/1]-S[0.1-40/0.1]
L-CPD-1AT3.5-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]-K[10-45/1]-S[0.1-40/0.1]
L-CPD-1AT4-[12-120/0.01]-F[10-119/0.01]-V[1-3.99/0.01]-K[10-45/1]-S[0.1-45/0.1]
L-CPD-1AT4-[12-120/0.01]-F[10-119/0.01]-VC[0.7-0.99/0.01]-K[10-45/1]-S[0.1-45/0.1]
L-CPD-1AT4.5-[12-120/0.01]-F[10-119/0.01]-V[1-4.49/0.01]-K[10-45/1]-S[0.1-50/0.1]
L-CPD-1AT5-[12-120/0.01]-F[10-119/0.01]-V[1-4.99/0.01]-K[10-45/1]-S[0.1-50/0.1]
L-CPD-1AT5.5-[12-120/0.01]-F[10-119/0.01]-V[1.5-5.49/0.01]-K[10-45/1]-S[0.1-50/0.1]
L-CPD-1AT5.5-[12-120/0.01]-F[10-119/0.01]-VC[1-1.49/0.01]-K[10-45/1]-S[0.1-50/0.1]
L-CPD-1AT6-[12-120/0.01]-F[10-119/0.01]-V[2-5.99/0.01]-K[10-45/1]-S[0.1-50/0.1]
L-CPD-1AT6-[12-120/0.01]-F[10-119/0.01]-VC[1.5-1.99/0.01]-K[10-45/1]-S[0.1-50/0.1]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Material	Shaft diameter tolerance	L dimension tolerance	Tip gradient tolerance	D/P (Shaft diameter) (mm)	Step (Step shape of the first step)	Shape (Tip shape)	RE (R shape alteration・enlargement) (mm)	A (Step shape diameter) (mm)	C (Step type taper width) (mm)	CVC (Designation of C dimension in increments of 0.01mm) (mm)	F (Bearing bore length) (mm)	G (Tip C chamfering width) (mm)	K (Tip angle) (°)	L (L dimension) (mm)	Q (Tip R chamfering) (mm)	R (Step type R) (mm)	S (Tip tapered width) (mm)	V (Tip diameter) (mm)	VC (V dimension alteration, smaller than V min) (mm)
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5	1A	No processing	-	-	-	-	10 ～ 99	-	-	12 ～ 100	-	-	-	1 ～ 1.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5	1A	No processing	-	-	-	-	10 ～ 99	-	-	12 ～ 100	-	-	-	-	0.6 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2	1A	No processing	-	-	-	-	10 ～ 99	-	-	12 ～ 100	-	-	-	1 ～ 1.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2.5	1A	No processing	-	-	-	-	10 ～ 99	-	-	12 ～ 100	-	-	-	0.5 ～ 2.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3	1A	No processing	-	-	-	-	10 ～ 99	-	-	12 ～ 100	-	-	-	1 ～ 2.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	1 ～ 3.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	1 ～ 3.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4.5	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	1 ～ 4.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	1 ～ 4.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	1.5 ～ 5.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	-	1 ～ 1.49
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	2 ～ 5.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6	1A	No processing	-	-	-	-	10 ～ 119	-	-	12 ～ 120	-	-	-	-	1.5 ～ 1.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5	1A	C	-	-	-	-	10 ～ 99	0.5 ～ 0.7	-	12 ～ 100	-	-	-	1 ～ 1.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5	1A	C	-	-	-	-	10 ～ 99	0.5 ～ 0.7	-	12 ～ 100	-	-	-	-	0.6 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2	1A	C	-	-	-	-	10 ～ 99	0.5 ～ 0.9	-	12 ～ 100	-	-	-	1 ～ 1.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2.5	1A	C	-	-	-	-	10 ～ 99	0.5 ～ 1.2	-	12 ～ 100	-	-	-	0.5 ～ 2.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3	1A	C	-	-	-	-	10 ～ 99	0.5 ～ 1.4	-	12 ～ 100	-	-	-	1 ～ 2.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 1.7	-	12 ～ 120	-	-	-	1 ～ 3.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 1.7	-	12 ～ 120	-	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 1.9	-	12 ～ 120	-	-	-	1 ～ 3.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 1.9	-	12 ～ 120	-	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4.5	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 2.2	-	12 ～ 120	-	-	-	1 ～ 4.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 2.4	-	12 ～ 120	-	-	-	1 ～ 4.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 2.7	-	12 ～ 120	-	-	-	1.5 ～ 5.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 2.7	-	12 ～ 120	-	-	-	-	1 ～ 1.49
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 2.9	-	12 ～ 120	-	-	-	2 ～ 5.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6	1A	C	-	-	-	-	10 ～ 119	0.5 ～ 2.9	-	12 ～ 120	-	-	-	-	1.5 ～ 1.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5	1A	R	-	-	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 0.7	-	-	1 ～ 1.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5	1A	R	-	-	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 0.7	-	-	-	0.6 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2	1A	R	-	-	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 0.9	-	-	1 ～ 1.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2.5	1A	R	-	-	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.2	-	-	0.5 ～ 2.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3	1A	R	-	-	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	-	-	1 ～ 2.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.7	-	-	1 ～ 3.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.7	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.9	-	-	1 ～ 3.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.9	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4.5	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.2	-	-	1 ～ 4.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.4	-	-	1 ～ 4.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.7	-	-	1.5 ～ 5.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.7	-	-	-	1 ～ 1.49
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	-	-	2 ～ 5.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6	1A	R	-	-	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	-	-	-	1.5 ～ 1.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5	1A	T	-	-	-	-	10 ～ 99	-	10 ～ 45	12 ～ 100	-	-	0.1 ～ 20	1 ～ 1.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	1.5	1A	T	-	-	-	-	10 ～ 99	-	10 ～ 45	12 ～ 100	-	-	0.1 ～ 20	-	0.6 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2	1A	T	-	-	-	-	10 ～ 99	-	10 ～ 45	12 ～ 100	-	-	0.1 ～ 25	1 ～ 1.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	2.5	1A	T	-	-	-	-	10 ～ 99	-	10 ～ 45	12 ～ 100	-	-	0.1 ～ 30	0.5 ～ 2.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3	1A	T	-	-	-	-	10 ～ 99	-	10 ～ 45	12 ～ 100	-	-	0.1 ～ 35	1 ～ 2.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 40	1 ～ 3.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	3.5	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 40	-	0.7 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 45	1 ～ 3.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 45	-	0.7 ～ 0.99
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	4.5	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 50	1 ～ 4.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 50	1 ～ 4.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 50	1.5 ～ 5.49	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	5.5	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 50	-	1 ～ 1.49
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 50	2 ～ 5.99	-
-	1 Piece(s)	6 Day(s) or more	10	SKD61	-0.01/-0.02	+0.02/0	±0.015	6	1A	T	-	-	-	-	10 ～ 119	-	10 ～ 45	12 ～ 120	-	-	0.1 ～ 50	-	1.5 ～ 1.99

Loading...Tải…

Product TOP

Basic InformationThông tin cơ bản

Shape type	One-step	Surface treatment	Tip lapped	Head thickness	4mm(T4)
Step (Step shape of the second step)	No second step

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material

Shaft diameter tolerance

Tip gradient tolerance

D/P (Shaft diameter)(mm)

Step (Step shape of the first step)

Shape (Tip shape)

RE (R shape alteration・enlargement)(mm)

A (Step shape diameter)(mm)

C (Step type taper width)(mm)

CVC (Designation of C dimension in increments of 0.01mm)(mm)

F (Bearing bore length)(mm)

G (Tip C chamfering width)(mm)

K (Tip angle)(°)

L (L dimension)(mm)

Q (Tip R chamfering)(mm)

R (Step type R)(mm)

S (Tip tapered width)(mm)

V (Tip diameter)(mm)

VC (V dimension alteration, smaller than V min)(mm)

type

L dimension tolerance

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

One-Step Core Pins -Tip Lapped・Shaft Diameter (D) Selection Type-

Copy Part Number URL to Clipboard

Product Description

Part Number

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều