(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
70 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *Please see the specification table or model number list for applicable products. [Handling Standards] Coarse M diameter: 2, 2.2, 2.5, 2.6, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 18, Fine M diameter: 6, 8, 10, 12, 14, 16, 18You can purchase from 1 piece! Application: Strengthens the female thread of the base. Features: Durable screw connection. You can create a concise design. Material: SUS304.
From: 27,524 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
GCOIL
From: 79,536 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
Stainless Steel Insert Nut, Screw-in (Slotted)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing
From: 21,018 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FILTEC
[Features] ・Spring type coil for female thread used for durability materials such as non-ferrous, mild steel, wood. It is made of stainless steel. [Material] ・ SUS304 [Features] ・Strong screw fastening to base material with low hardness such as light metal (aluminum, magnesium, copper) castings, plastic wood, etc. · It is made of stainless steel and has corrosion resistance, heat resistance, abrasion resistance, especially excellent effect of prevention of relaxation due to vibration or impact •Related keywords: Filtech, Screw Insert, Insert
From: 2,072 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
ACCURATE
An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.
From: 7,898 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
From: 1,237,791 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
There is no need to break the tongue after insertion, making the insertion process easy[Specification expansion] In response to many requests, a new standard product has been released! *Please see the specification list or catalog PDF for applicable products.
From: 50,254 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】
TOKAI METAL INDUSTRY
A general-purpose well-balanced screw insert with low cost.[Features]・ At the time of press-fit, the product has direction.・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.
From: 4,210 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Sprue【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
From: 13,541 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
[Features]·The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.·Dedicated tools enable the insertion and extraction without tangs.·Extraction will not damage the male threads nor the product.·You don't have to tear off the tang, look for the broken tang, or check the gauge.
From: 17,301 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Sprue (Unified) (UNC)【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
From: 19,988 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
From: 31,881 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tangless insert metric coarsetaping packaging
ACCURATE
We prevent incorrect quantities by shipping using tape and packaging. Aims to improve efficiency through using electric tools in combination.
From: 14,676 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dodge Bit Insert Standard SD (Brass Cadmium-Less)
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
From: 10,461 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Brass Insert Nut (Screw-In Type) IRB/IRB-C
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing
From: 10,658 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
IMAO CORPORATION
Able to reinforce screw parts which have a high frequency of bolt attachment/removal, and any base metal screw parts. Can even be utilized for restoring damaged screws.[Features]· Simply insert the key to prevent loosening.· Can quickly repair damaged screws.· Suitable for use in places with a high frequency of bolt attachment/removal.· Can reinforce all types of base metal screw except for iron, non-ferrous metal, and non-metallic types.
From: 136,620 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
From: 56,426 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
From: 20,415 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing
From: 12,651 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
From: 9,530 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-3,000 Pieces Per Package】
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
From: 5,298 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
From: 31,881 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
Stainless Steel Recoil【1-100 Pieces Per Package】
SUNCO
[Nominal M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24[Material] Stainless Steel[Surface Processing] Bare
From: 51,020 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aluminum Insert Nut (Screw-In Type) IRL-B/IRL-K
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less[Treatment] Black anodized (BAL)/Kanigen plating
From: 23,806 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Screw Reinforcement Tangless Insert【10-20 Pieces Per Package】
KS SANGYO
Tangless insert screw.[Features]· This tangless insert drastically cuts down on work procedures and time, which increases work efficiency, making it possible to reduce costs.· Insert work, which took 56 seconds in the past, was drastically shortened to 7 seconds by using a dedicated power tool.· Tangless design means no tangs to break off and no concerns for missing pitches or damaging the base material.[Applications]· For reinforcement of materials such as aluminum and plastic where female threads have low strength.· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.· Repairs and reforms broken, worn out, and crushed female threads.
From: 419,000 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel/Insert Nut Threaded Type / IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing
From: 15,838 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Brass Bit Insert (Standard Model / Single-Sided Type) HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing
From: 6,676 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.
From: 23,088 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
From: 33,716 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
JAPAN DRIVEIT
[Type] Press Fit [Materials] Brass [Screw type] Metric (coarse) screw, without notch [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8
From: 8,211 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42[Material] Stainless Steel[Surface Processing] Bare
From: 424,432 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel E-Sert Fine (Hemlock-Made)【1-100 Pieces Per Package】
SUNCO
[Nominal M] 6, 8, 14, 18, 20, 22, 24, 27, 30, 33, 36, 39[Material] Stainless Steel[Surface Processing] Bare
From: 49,282 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel E-Sert (Unify) (UNF)【1-100 Pieces Per Package】
SUNCO
[Nominal] #6-40, #8-36, #10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 5/8-18, 3/4-16, 7/8-14, 1-12[Material] Stainless Steel[Surface Processing] Bare
From: 55,837 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Brass Insert Nut (Screw-In Type) IRB-W/-CW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm[Treatment] Nickel plating (Ni)/degreasing
From: 98,308 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing
From: 21,018 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Brass Bit Insert (Flange Type) / HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm[Processing] Degreasing
From: 7,870 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
From: 1,672,769 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
From: 25,763 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
From: 25,748 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
RECOIL
The color of the main body will become silver when the method of heat treatment changes.Not plated. (Inconel Black Recoil)An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.[Features]· Nickel alloy.· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.
From: 413,803 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Recoil Packet (METRIC)【10 Pieces Per Package】
RECOIL
[Features]· The recoil is created by coiling a high quality stainless steel wire with rhomboid cross section into a spring-like shape.· The insert is slightly larger than the tap hole of the other base metal, and can be attached by lightly narrowing down.· Once equipped, its spring effect makes it almost permanently non-extractable.
From: 603,060 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
JAPAN DRIVEIT
[Type] Press Fit Use[Application] Resin: General [Materials] Brass [Screw type] Metric (coarse) screw, without notch [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)[L](D = screw diameter M) 1D 1.5D 2D [Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2
From: 7,890 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tangless insert metric coarselocking
ACCURATE
A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.
From: 13,613 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel Sprue (Other, Fine)
SUNCO
[Nominal M] 8, 24, 33[Material] Stainless Steel[Surface Processing] Bare
From: 177,523 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8[Material] Free-Cutting Stainless Steel (SUS303)[Processing] Degreasing
From: 26,595 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
CADCAD |
From |
Days to ShipSố ngày giao hàng |
Screw Dia. M (after insertion)(mm) |
Type |
Material |
Screw Type |
Length L (after insertion) (D = Thread Dia. M) |
Application |
Notch |
Thread Dia. (After inserted), Unified(inch) |
Shape |
Sales Unit |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | MISUMI | GCOIL | HIROSUGI-KEIKI | FILTEC | ACCURATE | MISUMI | MISUMI | TOKAI METAL INDUSTRY | NIPPON SPREW | RECOIL | NIPPON SPREW | RECOIL | ACCURATE | TOKAI METAL INDUSTRY | HIROSUGI-KEIKI | IMAO CORPORATION | RECOIL | RECOIL | HIROSUGI-KEIKI | TSUGAMI | TOKAI METAL INDUSTRY | RECOIL | SUNCO | HIROSUGI-KEIKI | KS SANGYO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | TSUGAMI | RECOIL | JAPAN DRIVEIT | SUNCO | SUNCO | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | MISUMI | RECOIL | RECOIL | RECOIL | RECOIL | JAPAN DRIVEIT | ACCURATE | SUNCO | HIROSUGI-KEIKI |
Product SeriesDòng sản phẩm | Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】 | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-3,000 Pieces Per Package】 | Screw Reinforcement Tangless Insert【10-20 Pieces Per Package】 | Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】 | Stainless Steel E-Sert Fine (Hemlock-Made)【1-100 Pieces Per Package】 | Stainless Steel E-Sert (Unify) (UNF)【1-100 Pieces Per Package】 | Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W | Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW | |||||||||||||||||||||||||||||||||||||
CADCAD |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
From | 27,524 VND | 79,536 VND | 21,018 VND | 2,072 VND | 7,898 VND | 1,237,791 VND | 50,254 VND | 4,210 VND | 13,541 VND | 17,301 VND | 19,988 VND | 31,881 VND | 14,676 VND | 10,461 VND | 10,658 VND | 136,620 VND | 56,426 VND | 20,415 VND | 12,651 VND | 9,530 VND | 5,298 VND | 31,881 VND | 51,020 VND | 23,806 VND | 419,000 VND | 15,838 VND | 6,676 VND | 23,088 VND | 33,716 VND | 8,211 VND | 424,432 VND | 49,282 VND | 55,837 VND | 98,308 VND | 21,018 VND | 7,870 VND | 1,672,769 VND | 25,763 VND | 25,748 VND | 413,803 VND | 603,060 VND | 7,890 VND | 13,613 VND | 177,523 VND | 26,595 VND |
Days to ShipSố ngày giao hàng | Same day or more | 4 Day(s) | 11 Day(s) or more | 4 Day(s) | Same day or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | Same day or more | 6 Day(s) or more | 4 Day(s) | 6 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more |
Screw Dia. M (after insertion)(mm) | 3 ~ 16 | 16 | 2.6 ~ 8 | 3 ~ 8 | 2 ~ 24 | 3 ~ 8 | 2.5 ~ 10 | 2 ~ 6 | 2 ~ 30 | 2.5 ~ 12 | - | 2 ~ 12 | 2.5 ~ 5 | 5 | 2 ~ 8 | 4 ~ 24 | 3 ~ 12 | 3 ~ 16 | 2.6 ~ 8 | 2 ~ 24 | 3 ~ 8 | 3 ~ 8 | 2 ~ 16 | 2 ~ 8 | 2 ~ 12 | 2 ~ 8 | 2 ~ 5 | 10 ~ 16 | 3 ~ 24 | 3 ~ 10 | 7 ~ 30 | 6 ~ 30 | - | 2.6 ~ 8 | 2.6 ~ 8 | 3 ~ 4 | 2.5 ~ 8 | 2.5 | 3 ~ 20 | 3 ~ 12 | 2 | 4 | 2.5 ~ 12 | 24 | 2.6 ~ 8 |
Type | Standard | Standard | Self-Tapping | Standard | Tangless | Standard | Tangless | Standard | Standard | Tangless | Standard | Standard | Tangless | Standard | Self-Tapping | Key Lock | Standard | Standard | Self-Tapping | Standard | Standard | Standard | Standard | Self-Tapping | Tangless | Self-Tapping | Press Fit | Standard | Standard | Press Fit | Standard | Standard | Standard | Self-Tapping | Self-Tapping | Press Fit | Tangless | Standard | Standard | Standard | Standard | Press Fit | Tangless | Standard | Self-Tapping |
Material | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) / Phosphor Bronze | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | - | Stainless Steel (SUS303/304) | Brass | Brass | Steel / Stainless Steel (SUS303/304) | Nitrox 60 | Stainless Steel (SUS316) | Brass | Stainless Steel (SUS303/304) | Brass | - | Stainless Steel (SUS303/304) | Aluminum | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Phosphor Bronze | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Inconel X-750 | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) |
Screw Type | Metric (Coarse) Thread / Metric (Fine) Thread | - | Metric (Coarse) Thread | - | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread / Metric (Fine) Thread / Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread |
Length L (after insertion) (D = Thread Dia. M) | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D | 1D |
Application | Light Metal | Light Metal | Cast Iron | - | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | Resin General | Light Metal | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General / Wood | Light Metal / Cast Iron / Resin General | Resin General | Light Metal | Light Metal / Cast Iron / Resin General / Wood | Light Metal | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General | Resin General | Light Metal / Cast Iron / Resin General / Wood | - | Light Metal | Light Metal / Cast Iron / Resin General | Cast Iron | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal | - | - | - | - | Light Metal | Cast Iron | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal / Cast Iron | - | Resin General | Light Metal / Cast Iron / Resin General | - | Cast Iron |
Notch | Provided | - | Not Provided | - | Not Provided | Provided | Not Provided | Not Provided | Provided | Not Provided | Provided | Provided | - | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Provided | Not Provided | Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | - | Not Provided | - | Provided | Not Provided |
Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | 1/2-13 ~ #10-24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2-20 ~ #8-36 | - | - | - | - | - | - | - | - | - | - | - | - |
Shape | - | - | Slotted | Standard | - | - | - | Standard | - | - | - | Standard | - | Standard | Standard | - | - | - | Slotted | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | - | - | - | Standard | - | Standard | Slotted |
Sales Unit | Low Quantity (Available beginning with 1 pc.) | - | Box, Pkg. | - | - | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy