• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Self Tapping Screws - Truss Head

  MISUMI

  Sizes are M3 to M5. Shipment from 1 pc. is available as needed.

  • Volume Discount

  CAD ：

  2D / 3D

  From: 3,030 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross-Head Truss-Head Tapping Screw, Class 1, Shape A【1-10,000 Pieces Per Package】

  SUNCO

  This product has the coarsest pitch among type 1 to 3. [Materials]stainless steel (SUS316L)

  • Volume Discount

  CAD ：

  2D / 3D

  From: 350 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Evatite Phillips Truss Head Screw【1-1,000 Pieces Per Package】

  YAMASHINA

  Can be screwed in using low torque, so it is optimal for continuous work. Highly vibration resistant and not easily loosened. This product resists chipping when tightened, and so there is no need to be concerned about electrical problems. Some variation in pilot hole diameters is allowable.

  From: 85,686 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Truss Tapping Screws, 2 Models B-0 Shape【1-8,000 Pieces Per Package】

  SUNCO

  Tapered down to the top 2.5 to 3 threads, providing a finer pitch than type 1.

  • Volume Discount

  CAD ：

  2D / 3D

  From: 1,080 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Truss Head Tapping Screw【10-270 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]　● This screw for use with thin steel plates features a head with a large outer diameter, and can be fastened just with a pilot hole—no tap or nut required.　(B43 Type)　　· Product is made of stainless steel, which is corrosion resistant.　(B742 Type)　　· Trivalent chromate product with less impact on the environment.

  From: 146,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Truss Tapping Screw, Type 4 AB Shape【700-1,000 Pieces Per Package】

  SUNCO

  Has screws that tighten while tapping in locations where there are open pilot holes, eliminating the need for tapping work, and prevents rattling.

  CAD ：

  2D / 3D

  From: 621,400 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LR Truss Tapping Screw Type 1 A【1,000-2,000 Pieces Per Package】

  OSP

  · Thread ridge type: Self-tapping screws · Detailed shape: Truss · Mounting hole dimensions: LR (line recess) · Basic shape: Standard (round) · Material: Steel · Tip shape: Cone point · Additional shapes: Standard · Sales unit: Box/package · Thread: M3, M4 · Length (mm): 10, 12 · Surface treatment: Trivalent chromate, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, chrome plating · Application: Standard tamper-proof

  From: 999,840 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Truss Tapping Screws, 2 Models Grooved B-1 Shape【1-8,000 Pieces Per Package】

  SUNCO

  The tip is cut by 1/4, the cut portion acting like a blade to trim the target material.

  • Volume Discount

  CAD ：

  2D / 3D

  From: 38,102 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Small Head Truss Tapping Screw, Type 3 C-0 Shape【1-1,000 Pieces Per Package】

  SUNCO

  Tapered down to the top 2.5 to 3 threads, at the same pitch as machine screws.

  • Volume Discount

  CAD ：

  2D / 3D

  From: 38,485 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SUNLOCK【1-1,000 Pieces Per Package】

  MARUEMU WORKS

  The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two formation features enable smooth screwing with little torque. The female thread is formed with plastic processing, so there are no shavings when cut. In addition, there is a loosening prevention function thanks to the elimination of the gap between the male and female threads due to the post-molding spring-back effect. Plastic processing during molding creates stronger female threads and high retention.

  From: 38,193 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type 1A TRX Tamper-Proof Truss Tapping Screw【1-1,000 Pieces Per Package】

  SUNCO

  [Thread ridge type] Self Tapping Screws [Nominal Thread (M)] 4 [Detailed shape] Truss [Mounting hole dimensions] Hexalobular socket [Basic shape] Standard (Round) [Materials] Stainless steel [Tip shape] Cone Point [Additional shapes] Standard [Application] Standard [Length L (mm)] 8 10 12 16 20 25 30 [Surface treatment] None, Black paint [Sales unit] Low Quantity (Available for Purchase from 1pc) Box and Pkg.

  • Volume Discount

  From: 40,538 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phillips Truss Head Diamond Screw【1,000-2,000 Pieces Per Package】

  SUNCO

  [Thread ridge type] Self Tapping Screws [Detailed shape] Truss [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Materials] Steel [Tip shape] Flat End [Sales unit] Box/package [Nominal Thread (M)] 4 5 [Length L (mm)] 8 10 12 [Surface treatment] Trivalent white, Chromate plating

  From: 1,360,032 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Brazier Tapping Screw, Type 2 B-0 Shape【1,400-2,200 Pieces Per Package】

  SUNCO

  Tapered down to the top 2.5 to 3 threads, providing a finer pitch than type 1.

  CAD ：

  2D / 3D

  From: 597,404 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phillips Head Truss Tapping Screw Class 2 with Guide BRP Model G=5【1-1,200 Pieces Per Package】

  SUNCO

  [Thread ridge type] Self-tapping Screws [Nominal Thread (M)] 4 [Detailed shape] Truss [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Materials] Equivalent to SUS304 [Tip shape] Other Specials[Shape] [Additional shapes] Standard [Application] Standard [Length L (mm)] 15 20 25 30 35 40 45 50 60 [Surface treatment] None, German-brown plating, Black paint, Temper color, Temper color, Temper color (thick) [Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.

  • Volume Discount

  CAD ：

  2D / 3D

  From: 38,967 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Small Head Truss Tapping Screw, Type 1 A Shape【1-1,200 Pieces Per Package】

  SUNCO

  The longest pitch among the three.

  • Volume Discount

  CAD ：

  2D / 3D

  From: 38,570 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Truss Tapping Screws, 3 Models Grooved C-1 Shape【1-2,500 Pieces Per Package】

  SUNCO

  · Materials: Equivalent to SWCH/Equivalent to SUS304 · Surface treatment: None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, green chromate, black chromate, nickel plating, chromate plating, dacrotized, stainless steel coating, trivalent stainless steel coating, stainless steel plating, German, brown plating, tin cobalt, black paint with matte black head paint, black paint with black head paint, black paint with white head paint, temper color

  • Volume Discount

  CAD ：

  2D / 3D

  From: 38,201 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Truss Tapping Screws, 3 Models C-0 Shape【1-1,600 Pieces Per Package】

  SUNCO

  [Materials] Equivalent to SWCH, Equivalent to SUS304 [Surface treatment] None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate, non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, black chromate, nickel plating, black nickel, chrome plating, stainless steel plating, German brown plating, tin cobalt, black paint with white head paint, temper color

  • Volume Discount

  CAD ：

  2D / 3D

  From: 37,945 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Rib Screw (Truss)【1,200 Pieces Per Package】

  CROWN SCREW

  Having "asymmetrical" thread angles, prevention of damage to a female screw and improvement in strength at the time of tightening are achieved all at once in such a form that the thin plate is surrounded, which improves the workability and yield.

  From: 947,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Usca Truss【1,200-3,000 Pieces Per Package】

  YAMASHINA

  Tapping screw for thin plates. Offers easy screwing in pilot hole probing and low torque, for excellent workability.

  From: 1,600,493 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Evatite Cross Recessed Truss Small Head, D=8

  YAMASHINA

  Can be screwed in using low torque, so it is optimal for continuous work. Highly vibration resistant and not easily loosened. This product resists chipping when tightened, and so there is no need to be concerned about electrical problems. Some variation in pilot hole diameters is allowable.

  From: 85,875 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SUNLOCK 550【1,000 Pieces Per Package】

  MARUEMU WORKS

  Non-circular low torque stainless steel tapping screw that offers high strength, strong corrosion resistance, and is strong against fractures.

  From: 2,000,000 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Recessed Small Head Truss Tapping Screw, Type 2 B-0 Shape【1-1,000 Pieces Per Package】

  SUNCO

  Tapered down to the top 2.5 to 3 threads, providing a finer pitch than type 1.

  • Volume Discount

  From: 38,797 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type 2-BRP Phillips Small Truss Head Tapping Screw with Guide, G = 5【1-500 Pieces Per Package】

  SUNCO

  [Thread ridge type] Self-tapping Screws [Nominal Thread (M)] 4 [Detailed shape] Truss [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Materials] Stainless steel [Surface treatment] None [Tip shape] Flanged Solid [Length L (mm)] 20 25 30 40 45 50 55 60 [Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.

  • Volume Discount

  From: 39,047 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap-Tight S Type Truss【1-16,000 Pieces Per Package】

  SUNCO

  [Materials] Steel Stainless steel SUS410 ASL516 Stainless steel [Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating, Stainless steel coating, Stainless steel coating, Trivalent stainless steel coating, CU plating, Black paint

  • Volume Discount

  From: 38,517 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap-Tight B Type Truss【1-16,000 Pieces Per Package】

  SUNCO

  [Materials] Steel Stainless steel [Surface treatment] None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, nickel plating, black nickel, chrome plating, stainless steel coating, stainless steel coating, trivalent stainless steel coating, black paint

  • Volume Discount

  From: 39,022 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap-Tight B Type Brazier【600-5,000 Pieces Per Package】

  SUNCO

  [Thread ridge type] Tap-Tight [Detailed shape] Truss [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Materials] Steel [Tip shape] Other Specials[Shape] [Additional shapes] Standard [Sales unit] Box/package [Application] Standard [Nominal Thread (M)] 3 4 [Length L (mm)] 6 8 10 12 14 16 18 20 25 [Surface treatment] Non-chrome non-chrome (zinc plating) chromate[Color]Non-chrome (zinc plating) black[Color]Non-chrome black[Color] Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating

  From: 703,887 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap-Tight P Type Truss【1-16,000 Pieces Per Package】

  SUNCO

  [Materials] Steel Stainless steel SUS410 Stainless steel [Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Nickel plating, Black nickel, Chrome plating, Stainless steel coating, Stainless steel coating, Trivalent stainless steel coating, Black paint, Trivalent + Head coating (white)

  • Volume Discount

  From: 2,850 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap-Tight C Type Truss【1,500-2,000 Pieces Per Package】

  SUNCO

  [Thread ridge type] Tap-Tight [Nominal Thread (M)] 4 [Detailed shape] Truss [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Materials] Steel [Tip shape] Flat End [Sales unit] Box/package [Length L (mm)] 8 10 [Surface treatment] Non-chrome non-chrome (zinc plating) chromate[Color]Non-chrome (zinc plating) black[Color]Non-chrome black[Color] Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating

  From: 917,853 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SUNLOCK Truss【1-1,000 Pieces Per Package】

  MARUEMU WORKS

  SUNLOCK is an ideal screw that offers strong "tapping" with "small torque." The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two features in its shape make it possible to be screwed in smoothly with small torque. The female thread is formed with plastic processing, so there are no shavings from cutting. In addition, there is a loosening effect because the gap between the male screw and the internal screw is eliminated by the spring-back effect after molding. Plastic processing during formation creates strong female threads and high retention.

  From: 4,203 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SUNLOCK Truss Small Head (D=8)【1-1,000 Pieces Per Package】

  MARUEMU WORKS

  SUNLOCK is an ideal screw that offers strong "tapping" with "small torque." The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two features in its shape make it possible to be screwed in smoothly with small torque. The female thread is formed with plastic processing, so there are no shavings from cutting. In addition, there is a loosening effect because the gap between the male screw and the internal screw is eliminated by the spring-back effect after molding. Plastic processing during formation creates strong female threads and high retention.

  From: 4,951 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  FT Truss Screw【3,000-7,000 Pieces Per Package】

  SUNCO

  [Thread ridge type] Tap-Tight [Detailed shape] Truss [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Materials] Steel [Surface treatment] Trivalent white [Tip shape] Flat End [Sales unit] Box/package [Nominal Thread (M)] 4 5 [Length L (mm)] 6 8 10 12 16

  From: 4,999,200 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super-Point Truss Screw

  SUNCO

  [Thread ridge type] Tap-Tight [Nominal Thread (M)] 4 [Detailed shape] Truss [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Materials] SUS410 [Surface treatment] None [Tip shape] Flat End [Sales unit] Low Quantity (Available for Purchase from 1pc) [Length L (mm)] 6 8 10 12 16

  • Volume Discount

  From: 38,421 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SUNCO tight S type truss【600-800 Pieces Per Package】

  SUNCO

  [Nominal M] 3, 4[Material] Steel · Stainless Steel[Surface Processing] Non-chrome (Zinc Plating) Chromate Color, Non-chrome (Zinc Plating) Black, Chrome Plating White, Non-chrome Black, Trivalent Black, Trivalent White, Bright Chromate Plating, Chromate Plating, Black Chromate, Nickel Plating, Chrome Plated, Stainless Steel Coating, Trivalent Stainless Coating, German Brown Plating, Black Paint

  From: 903,855 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sun lock truss【1,000 Pieces Per Package】

  SUNCO

  [Nominal M] 3, 4, 5[Material] SUS410[Surface Processing] German Brown Plating, Black Paint

  From: 2,793,552 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel SUS410 Ever Tight Truss【1,000 Pieces Per Package】

  SUNCO

  [Nominal M] 4[Material] SUS410[Surface Processing] German Brown Plating, Black Paint

  From: 1,969,184 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Detailed Shape
Nominal of Thread (M)
Thread Type
Length L (mm)
Mounting Hole Shape
Surface Treatment
Tip Shape
Basic Shape
Material
Additional Shape
Sales Unit
Application

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	SUNCO	YAMASHINA	SUNCO	TRUSCO NAKAYAMA	SUNCO	OSP	SUNCO	SUNCO	MARUEMU WORKS	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	CROWN SCREW	YAMASHINA	YAMASHINA	MARUEMU WORKS	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	MARUEMU WORKS	MARUEMU WORKS	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO
Product SeriesDòng sản phẩm	Self Tapping Screws - Truss Head	Cross-Head Truss-Head Tapping Screw, Class 1, Shape A【1-10,000 Pieces Per Package】	Evatite Phillips Truss Head Screw【1-1,000 Pieces Per Package】	Cross Recessed Truss Tapping Screws, 2 Models B-0 Shape【1-8,000 Pieces Per Package】	Truss Head Tapping Screw【10-270 Pieces Per Package】	Cross Recessed Truss Tapping Screw, Type 4 AB Shape【700-1,000 Pieces Per Package】	LR Truss Tapping Screw Type 1 A【1,000-2,000 Pieces Per Package】	Cross Recessed Truss Tapping Screws, 2 Models Grooved B-1 Shape【1-8,000 Pieces Per Package】	Cross Recessed Small Head Truss Tapping Screw, Type 3 C-0 Shape【1-1,000 Pieces Per Package】	SUNLOCK【1-1,000 Pieces Per Package】	Type 1A TRX Tamper-Proof Truss Tapping Screw【1-1,000 Pieces Per Package】	Phillips Truss Head Diamond Screw【1,000-2,000 Pieces Per Package】	Cross Recessed Brazier Tapping Screw, Type 2 B-0 Shape【1,400-2,200 Pieces Per Package】	Phillips Head Truss Tapping Screw Class 2 with Guide BRP Model G=5【1-1,200 Pieces Per Package】	Cross Recessed Small Head Truss Tapping Screw, Type 1 A Shape【1-1,200 Pieces Per Package】	Cross Recessed Truss Tapping Screws, 3 Models Grooved C-1 Shape【1-2,500 Pieces Per Package】	Cross Recessed Truss Tapping Screws, 3 Models C-0 Shape【1-1,600 Pieces Per Package】	Rib Screw (Truss)【1,200 Pieces Per Package】	Usca Truss【1,200-3,000 Pieces Per Package】	Evatite Cross Recessed Truss Small Head, D=8	SUNLOCK 550【1,000 Pieces Per Package】	Cross Recessed Small Head Truss Tapping Screw, Type 2 B-0 Shape【1-1,000 Pieces Per Package】	Type 2-BRP Phillips Small Truss Head Tapping Screw with Guide, G = 5【1-500 Pieces Per Package】	Tap-Tight S Type Truss【1-16,000 Pieces Per Package】	Tap-Tight B Type Truss【1-16,000 Pieces Per Package】	Tap-Tight B Type Brazier【600-5,000 Pieces Per Package】	Tap-Tight P Type Truss【1-16,000 Pieces Per Package】	Tap-Tight C Type Truss【1,500-2,000 Pieces Per Package】	SUNLOCK Truss【1-1,000 Pieces Per Package】	SUNLOCK Truss Small Head (D=8)【1-1,000 Pieces Per Package】	FT Truss Screw【3,000-7,000 Pieces Per Package】	Super-Point Truss Screw	SUNCO tight S type truss【600-800 Pieces Per Package】	Sun lock truss【1,000 Pieces Per Package】	Stainless Steel SUS410 Ever Tight Truss【1,000 Pieces Per Package】
CADCAD	2D / 3D	2D / 3D		2D / 3D		2D / 3D		2D / 3D	2D / 3D				2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	3,030 VND	350 VND	85,686 VND	1,080 VND	146,000 VND	621,400 VND	999,840 VND	38,102 VND	38,485 VND	38,193 VND	40,538 VND	1,360,032 VND	597,404 VND	38,967 VND	38,570 VND	38,201 VND	37,945 VND	947,848 VND	1,600,493 VND	85,875 VND	2,000,000 VND	38,797 VND	39,047 VND	38,517 VND	39,022 VND	703,887 VND	2,850 VND	917,853 VND	4,203 VND	4,951 VND	4,999,200 VND	38,421 VND	903,855 VND	2,793,552 VND	1,969,184 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	6 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Detailed Shape	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss	Truss
Nominal of Thread (M)	3 ～ 5	2 ～ 8	4	2 ～ 6	3 ～ 6	4	3 ～ 4	2 ～ 6	4	3 ～ 5	4	4 ～ 5	3 ～ 4	4	4	3 ～ 8	3 ～ 6	4	3 ～ 4	4	4	4	4	2 ～ 5	2 ～ 5	3 ～ 4	2 ～ 5	4	3 ～ 5	4	4 ～ 5	4	4	4	4
Thread Type	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Self Tapping	Taptite	Taptite	Taptite	Taptite	Taptite	Taptite	Taptite	Taptite	Taptite	Taptite	Taptite	Taptite
Length L (mm)	6 ～ 20	4 ～ 100	6 ～ 25	3 ～ 45	6 ～ 50	8 ～ 20	10 ～ 12	4 ～ 60	5 ～ 35	8 ～ 50	8 ～ 30	8 ～ 12	6 ～ 20	15 ～ 60	6 ～ 60	5 ～ 60	6 ～ 40	8	8 ～ 12	12 ～ 16	8 ～ 16	8 ～ 16	20 ～ 60	4 ～ 20	4 ～ 25	6 ～ 25	4 ～ 25	8 ～ 10	6 ～ 40	6 ～ 25	6 ～ 16	6 ～ 16	25 ～ 30	16 ～ 20	12
Mounting Hole Shape	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Hexalobular Socket	Phillips	Phillips	Phillips	-	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips	Phillips
Surface Treatment	Not Provided / Trivalent Chromate	Stainless Steel Plating / Copper Plating / Tin Plating / Black Paint / White Paint / Temper Color / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating / Dacrotizing / Stainless Steel Coating	Black Paint / Not Provided	Stainless Steel Plating / Copper Plating / Tin Plating / Black Paint / Temper Color / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating / Dacrotizing / Stainless Steel Coating	Not Provided / Trivalent Chromate / Bright Chrome Plating	Not Provided / Trivalent Chromate / Chromate Plating	Trivalent Chromate	Stainless Steel Plating / Copper Plating / Tin Plating / Black Paint / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating / Dacrotizing / Stainless Steel Coating	Copper Plating / Black Paint / White Paint / Temper Color / Not Provided	Barrel, Passivated	Black Paint / Not Provided	Trivalent Chromate / Chromate Plating	Not Provided / Trivalent Chromate / Chromate Plating / Nickel Plating / Chrome Plating	Copper Plating / Black Paint / Temper Color / Not Provided	Copper Plating / Black Paint / Temper Color / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating	Copper Plating / Black Paint / White Paint / Not Provided / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating / Dacrotizing / Stainless Steel Coating	Stainless Steel Plating / Copper Plating / Tin Plating / Black Paint / White Paint / Temper Color / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating	Trivalent Chromate	-	Not Provided	Not Provided	Copper Plating / Black Paint / Not Provided	Not Provided	Black Paint / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating / Stainless Steel Coating	Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating	Trivalent Chromate / Chromate Plating / Nickel Plating / Chrome Plating	Black Paint / White Paint / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating	Trivalent Chromate	Copper Plating / Black Paint / Not Provided	Not Provided	Trivalent Chromate	Not Provided	Trivalent Chromate	Black Paint	Copper Plating
Tip Shape	Cone Point	Cone Point	Other Special Shapes	Other Special Shapes	Cone Point	Other Special Shapes	Cone Point	Other Special Shapes	Other Special Shapes	Rounded End	Cone Point	Flat End	Other Special Shapes	Other Special Shapes	Other Special Shapes	Other Special Shapes	Other Special Shapes	Cone Point	Other Special Shapes	Other Special Shapes	Rounded End	Flat End	Dog Point	Other Special Shapes	Other Special Shapes	Other Special Shapes	Flat End	Flat End	Flat End	Flat End	Flat End	Flat End	Flat End	Flat End	Flat End
Basic Shape	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Other Screws	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)	Standard (Round)
Material	Stainless Steel ～ Steel	Stainless Steel ～ Titanium	Stainless Steel	Stainless Steel ～ Steel	Stainless Steel ～ Steel	Stainless Steel ～ Steel	Steel	Stainless Steel ～ Steel	Stainless Steel	Stainless Steel	Stainless Steel	Steel	Steel	Stainless Steel	Stainless Steel ～ Steel	Stainless Steel ～ Steel	Stainless Steel ～ Steel	Steel	Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel ～ Steel	Stainless Steel ～ Steel	Steel	Stainless Steel ～ Steel	Steel	Stainless Steel	Stainless Steel	Steel	Stainless Steel	Steel	Stainless Steel	Stainless Steel
Additional Shape	Standard	Standard	Standard	Standard	-	Standard	Standard	Standard	Standard	Standard	Standard	-	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	-	-	Standard	Standard	Standard	-	-	-	-	-	-	Standard	Standard	Standard
Sales Unit	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	-	-	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	Box, Pkg.	Box, Pkg.
Application	Standard	Standard	Standard	Standard	Standard	Standard	Standard / Tamper Proof	Standard	Standard	Standard	Standard	-	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	High Strength	-	-	Standard	Standard	Standard	-	-	-	-	-	-	-	-	-

Loading...Tải…