One-Touch Fitting（Application：Standard, Mini Page3）

One-Touch Fitting KQ2 Series Double Universal Male Elbow KQ2VD (Sealant, No Sealant)

SMC

A one-touch fitting by SMC. [Features]· Improved tube insertion/removal.· Compact and light weight. [Applications]· Use to branch from female threads at right angles. The 2 branch directions can be set independently. [See here for catalog]· Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 15) circle (pp. 114)· Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 39) circle (pp. 144)

CAD ：

2D / 3D

Flame-Retardancy FR Quick-Connect Fitting KR-W2 Series Elbow Union KRL-W2

SMC

SMC quick-connect fitting.[Features]・ It can be used for FR soft nylon.・ Large holding force.・ It can be used from a low vacuum up to 1 MPa.・ Light removal force.・ Effective for piping in tight spaces.[Applications]· Used for piping in directions perpendicular to the female thread section.

CAD ：

2D / 3D

One-Touch Couplings - Stepped Diameter Union-Y

MISUMI

[Features]·A quick-connect fitting. reducing union Y.

• Volume Discount

CAD ：

2D / 3D

One-Touch Couplings - Male Elbows【5-10 Pieces Per Package】

MISUMI

Economy Type suitable for being used in standard environments where strictness is not required for flow rate calculation.

• Volume Discount

Extended Male Elbow KQB2W Metal One-Touch Fitting KQB Series

SMC

SMC One-Touch fitting. [Features]· Compact and lightweight.· Grease-free.· Fluid temperature: -5 to 150°C.· Brass parts: Electroless nickel plated. [Applications]· Basically same applications as the Male Elbow.· Use to avoid the disruption of an extra fitting where there is a difference in piping positions.

CAD ：

2D / 3D

Quick-Connect Fitting Stainless Steel KQ2-G Series Elbow Union KQ2L-G

SMC

SMC quick-connect fitting.[Features]・ Single-action attachment/release・ Vacuum -100 kPa can be used・ Metal parts material: SUS303・ Improved tube insertion and removal: Insertion force Max. 30% reduction, detachment force Max. 20% reduction・ Compact and weight reduction: Space ratio 24% down in height direction, 23% down in horizontal direction, 57% down in mass ratio[Applications]・ Used for piping at right angles from the female thread section

CAD ：

2D / 3D

One-Touch Couplings - Stepped Unions Tees

MISUMI

[Features]·A quick-connect fitting, reducing union tee.

• Volume Discount

CAD ：

2D / 3D

For General Piping, Tube Fitting, Reducer Union Wye

PISCO

A quick connect fitting for general pneumatic piping.[Features]· The seal part uses an elastic sleeve with a unique shape that shuts out air leaks.· The lock claws evenly grip the circumference of the tube.· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.· After installation, you can change the take-off angle of the resin main body. (applicable to some products)· Allows centralized piping.· Light gray specifications and cleanroom packaging specifications are also available as options.· The cleanroom packaging specification uses fluorine-based grease.· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).

CAD ：

2D / 3D

One-touch Fitting PCF【1-100 Pieces Per Package】

CDC

[Features] · Can be easily attached and detached in one operation by pushing the tube in. · The screw part has an O-ring or fluoropolymer coating. [Applications] · A single-action type pipe connection port used with pneumatic piping. · Can be used in various ways to suit the user's environment.

CAD ：

2D / 3D

Auxiliary Equipment, Quick-Connect Fitting, PH Series

AIRTAC

Diverse array of models and specification allow for use with various pneumatic systems.Excellent flow performance allows an amount of gas equal to the internal diameter of the tube to pass.Installation and removal of piping is simple and the tube-connecting element is safe and durable, which makes the product highly reliable.Since a joining agent is applied to the screw part and packing is used on the M5 screw, leakage is prevented.Nickel plating prevents corrosion and contamination, supporting a wide range of applications.

CAD ：

2D / 3D

One-Touch Fitting KQ2 Series Triple Universal Male Elbow KQ2VT (Sealant, No Sealant)

SMC

A one-touch fitting from SMC. Available in a wide variety of model variations. [Features]· Compact and lightweight.· Can be used with a vacuum pressure of -100 kPa or more.· Improved tube insertion/removal. [Applications]· Use for triple branching at right angles from female threads. The 3 branch directions can be set independently. [See here for catalog]· Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 15) circle (pp. 114)· Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 40) circle (pp. 145)

CAD ：

2D / 3D

Female Connector KQB2F Metal One-Touch Fitting KQB Series

SMC

SMC One-Touch fitting. [Features]· Compact, lightweight· Grease-free[Applications]· Use to pipe from male threads, such as on pressure gauges.

CAD ：

2D / 3D

Quick Coupling, Mini-Type TSH Hexagonal Socket Head Straight【1-10 Pieces Per Package】

KOGANEI

Hex socket head straight type that can be connected quickly in a single-action.[Features]·Sharing of nylon tube and urethane tube.·Focusing on ease of use such as sealing thread section.·You can connect quickly in a single-action.·Compact quick fitting that enables small pitch and space saving. (compared to conventional products, downsizing by 40% in volume, by 20% in outer diameter).·A wide variety of series such as 45° elbow and cross type is available, which is very useful for installation in a narrow space.[Applications]·Ideal for production lines using pneumatic equipment in all industries.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Union Elbow

PISCO

Quick connect fitting whose lock claw evenly grips the circumference of the tube.[Features]· Quick-connect fitting for general pneumatic piping.· After installation, you can change the take-off angle of the resin main body. (applicable to some products)· A wide lineup of products.· Allows centralized piping.· Collet features good action to prevent sore fingertips even with frequent attachment and detachment. You can distinctly feel the pushing action in your fingers.· The seal part uses an elastic sleeve with a unique shape that shuts out air leaks.· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.[Applications]· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.

CAD ：

2D / 3D

Touch Connector, Long Elbow

CHIYODA

A vacuum-compatible one-touch long elbow fitting with good drawing strength and durability. Select from a metal or plastic body.

CAD ：

2D

Push One E Series Connector

NITTA

[Features]・ The tube is a push-one connection・ No jigs or tools are required to connect the tubes・ Electroless nickel plating treatment is applied・ There is little deterioration of the surface and elution of copper ions into the fluid is prevented・ Uses flame-retardant resin (equivalent to UL94 standard V-0)・ Uses flame-retardant PBT resin as material・ Equivalent to UL94 V-0 and has excellent self-extinguishing property・ It can be used even in an environment where spatter is scattered・ Sealing on tapered male thread・ No need to wrap sealing tape

CAD ：

2D

Bulkhead Union KQ2E (Interchangeable With KJ), One-Touch Fitting KQ2 Series

SMC

One-touch fitting used to connect tubing through a panel, etc. [Features]· Compact, lightweight type with improved tube insertion and removal.· Suitable for use with nylon and urethane. The chuck provides secure retention and the collet increases the holding force on the tube.· Can be used for a wide range of pressures from a low vacuum up to a pressure of 1 MPa.· The use of a special profile ensures sealing and reduces resistance when the tube is inserted.· Piping workability can be improved by changing to a face seal structure.· When the fitting is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. [Applications]Use to connect two pieces of tubing through a panel, etc.

CAD ：

2D / 3D

Hex Socket Head Male Connector KQB2S Metal One-Touch Fitting KQB Series KQB Series

SMC

SMC One-Touch fitting. [Features]· Compact and lightweight.· Grease-free.· Fluid temperature: -5 to 150°C.· Brass parts: Electroless nickel plated. [Applications]· The internal hex allows thread connection by using an Allen wrench for confined spaces.

CAD ：

2D / 3D

Stainless Steel One-Touch Pipe Fitting KQ2 Series , Elbow Union Fitting KQ2L-G (Gasket Seal)

SMC

SMC One-Touch fitting. [Features]· One-touch IN/OUT connection.· Can be used at a vacuum of -100 kPa.· Metal parts material: SUS303.· Improved tube detachability: Max. 30% reduction in insertion force, max. 20% reduction in removal force.· Compact with reduced weight: space comparison; height reduced 24%, width reduced 23%, weight reduced 57%.· Body shape: Total of 27 models. [Applications]· Used for perpendicular piping from a female thread.

CAD ：

2D / 3D

One-Touch Couplings - 2-Port Swivel Elbows

MISUMI

[Features]·A quick-connect fitting, screw mount branch. [Material]·PBT (polybutylene terephthalate).

• Volume Discount

CAD ：

2D / 3D

One-Touch Couplings - Stepped Diameter Union Straight【5-10 Pieces Per Package】

MISUMI

Economy Type suitable for being used in standard environments where strictness is not required for flow rate calculation.

• Volume Discount

CAD ：

2D / 3D

For General Piping, Tube Fitting, Female Bulkhead Straight

PISCO

[Features]• Single-touch fitting for general pneumatic pipes.· Wide lineup of products.• Allows you to change the removal angle of the resin body after mounting.• Allows for centralized piping.• Light gray types and clean room packaged types are optional.• Clean room packaging specifications define the use of fluorinated grease.• Item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Hex Socket Head Universal Elbow

PISCO

A quick connect fitting whose seal part uses a unique elastic sleeve that shuts out air leaks.[Features]· Quick-connect fitting for general pneumatic piping.· After installation, you can change the take-off angle of the resin main body. (applicable to some products)· A wide lineup of products.· Allows centralized piping.· Collet features good action to prevent sore fingertips even with frequent attachment and detachment. You can distinctly feel the pushing action in your fingers.· The lock claws evenly grip the circumference of the tube.· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.· After installation, you can change the take-off angle of the resin body.[Applications]· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.

CAD ：

2D / 3D

For General Piping, Mini-Type Tube Fitting, Reducing Triple

PISCO

A complete line of quick connect fittings.[Features]· Quick-connect fitting for general pneumatic piping.· After installation, you can change the take-off angle of the resin body. (applicable to some products)· A wide lineup of products.· Allows centralized piping.· Collet features good action to prevent sore fingertips even with frequent attachment and detachment.· The seal part uses an elastic sleeve with a unique shape that shuts out air leaks.· The lock claws evenly grip the circumference of the tube.· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Bulkhead Union

PISCO

A quick connect fitting whose seal part uses a unique elastic sleeve that shuts out air leaks.[Features]· Quick-connect fitting for general pneumatic piping.· After installation, you can change the take-off angle of the resin main body. (applicable to some products)· A wide lineup of products.· Allows centralized piping.· Collet features good action to prevent sore fingertips even with frequent attachment and detachment. You can distinctly feel the pushing action in your fingers.· The lock claws evenly grip the circumference of the tube.· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.· After installation, you can change the take-off angle of the resin body.[Applications]· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.

CAD ：

2D / 3D

Push One A-Series Connector

NITTA

No jigs or tools are required for connecting tubes to this connector. Degradation of the surface is minimal and elution of copper ions into the liquid is also prevented.

CAD ：

2D

Bulkhead Male Elbow KQ2LE One-Touch Fitting KQ2 Series

SMC

A one-touch fitting by SMC. [Features]· Improved tube insertion/removal.· Compact and lightweight.· Can be used with a vacuum pressure of -100 kPa or more.· Body shape: Total of 51 models.· Thread part material / surface treatment (with/without): 2 types.· Available surface treatment: brass (no plating), brass + electroless nickel plating. [Applications]· Use to connect tubing through panels, etc., and to change the tube direction by 90 degrees. [See here for the catalog]Dimensional outline drawing: pp. 24, 46, 129, 154Product details: pp. 5, 29, 101, 133Standards information: pp. 6, 30, 102, 134

CAD ：

2D / 3D

Branch KQ2U (Sealant), One-Touch Fitting KQ2 Series

SMC

SMC quick-connect fitting.[Features]・ Improved tube insertion and removal・ Compact and weight reduction[Applications]・ Used for branch piping in the same direction from the female thread section[Please click here for the catalog]・ Applicable metric tube outer diameter, connection thread "R" P.124・ Applicable tube outer diameter inch Connection thread "NPT" P.151 Connection thread "R" P.162* Made-to-order / clean series P.131, 156, 163

CAD ：

2D / 3D

Plug-In Y KQ2U, One-Touch Fitting KQ2 Series

SMC

One-touch fitting for which repiping is possible. [Features]· Improved tube insertion and removal.· Compact, lightweight.· Can be used in vacuum to -100 kPa. [Applications]· Use to branch into two in the same direction in line with the one-touch fitting.

CAD ：

2D / 3D

Stainless Steel One-Touch Pipe Fitting KQ2-G Series, Half Union Fitting With Hex Socket KQ2S-G (Sealant / No Sealant)

SMC

One-touch pipe fitting made by SMC. [Features]· One-touch IN/OUT connection.· Can be used with -100‑kPa vacuum. [Applications]· For tight spaces.

CAD ：

2D / 3D

Straight KQG2H, SUS316 One-Touch Pipe Fitting KQG Series

SMC

SMC One-Touch fitting. [Features]· Compact and lightweight.· Grease-free.· Can be used with steam.· Metal part: SUS316, Seal part: special FKM.· Working fluid temperature: -5 to +150°C· Conforms to the Food Sanitation Act of Japan. (Part materials conform to the tool and packaging container standards test.)[Applications]· Used for connecting tubes in one direction.

CAD ：

2D / 3D

Miniature One-Touch Coupling Connectors - Connectors

MISUMI

[Features]·A miniature type quick-connect fitting. ·A connector type.

• Volume Discount

CAD ：

2D / 3D

For General Piping, Tube Fitting, Socket Elbow

PISCO

[Features]· One-touch fitting for general pneumatic pipes.· Rich lineup.· The take-off angle of the resin body can be changed after mounting.· Centralized piping is supported.· Light gray and clean room packaged types are available as options.· Clean room packaging specification uses fluorinated grease.· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Triple Universal Elbow

PISCO

A complete line of quick connect fittings.[Features]· Quick-connect fitting for general pneumatic piping.· After installation, you can change the take-off angle of the resin main body. (applicable to some products)· Allows centralized piping.· Light gray specifications and cleanroom packaging specifications are also available as options.· The cleanroom packaging specification uses fluorine-based grease.· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).[Applications]· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.· After installation, you can change the take-off angle of the resin body.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Reducer Double Wye

PISCO

A complete line of quick connect fittings.[Features]· Quick-connect fitting for general pneumatic piping.· After installation, you can change the take-off angle of the resin main body. (applicable to some products)· Allows centralized piping.· Light gray specifications and cleanroom packaging specifications are also available as options.· The cleanroom packaging specification uses fluorine-based grease.· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).[Applications]· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.· After installation, you can change the take-off angle of the resin body.

CAD ：

2D / 3D

For General Piping, Mini-Type Tube Fitting, Long Elbow

PISCO

[Features]· Ultra-small one-touch fitting for general pneumatic pipes.· Reduced size with a volume ratio of 40% over the standard type.· Elliptical release ring allows easy tube release.· The φ1.8 mm type is an industry-first minimum one-touch type.· Optimum for piping of small actuators and such.· Light gray types, and clean room packaged types available as options.· Clean room packaging specifications define the use of fluorinated grease.· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.

CAD ：

2D / 3D

Touch Connector Five Union

CHIYODA

A low-weight quick-connect fitting that allows you to easily attach and detach the air tube.[Features]· Cost-effectiveness by thorough material reduction. Achieves thorough cost-effectiveness by eliminating unnecessary parts and forming with the smallest parts· Weight reduction by thorough material reduction. Partial body made of resin to further reduce weight· New-type lock ring employed. Realizes a joint function for smooth and reliable piping work· New-type ring seal employed. Reducing connection operation force while maintaining high airtightness・ All items are laser marked. The model number of all items is described on the product・ Flame-retardant body. Flame-retardant resin standard adoption· Thread section sealing (tapered male thread). Due to the thread section sealing, piping is possible as it is.· Flexibility of the threaded top portion. The body of the elbow, branch tee, etc., and the thread section can be rotated (Not a rotary type. The all resin type does not rotate)・ Two colors of white and black can be selected for the body resin part[Applications]・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

CAD ：

2D

Multi-Connector With Single-Action Fittings, DMK Series

SMC

Multi-connectors with single-action fittings are used to attach panels to machine equipment. Multiple tubes (nylon, soft nylon, polyurethane) can be securely mounted and unmounted with a single action.The unique positioning mechanism means that this product can be installed and removed with ease, even in places that are hidden from view, without any risk of misalignment caused in the course of detachment and reattachment.[Features]· The simple mounting procedure helps reduce labor hours dramatically compared to using a number of bulkhead union fittings for panels.· Tubes can be attached to the multi-connector with a single action (with single-action fittings)· Available in 6-tube or 12-tube models

CAD ：

2D / 3D

Air One-touch Fitting (PY)

SANGA PNEUMATIC

CAD ：

2D

Air One-touch Fitting (PCF)

SANGA PNEUMATIC

CAD ：

2D

Quick-Connect Fitting Male Connector EPCH Series

EASUN

Single touch fitting with male connector. The connection piping screws are R1/8, R2/8, R3/8, R1/2, and the tube diameter applied from M5 can be selected from ⌀4, 6, 8, 10, 12, or 16. We keep items in stock to enable same-day shipping. Please note that some products are only sold in lots. (Example: Minimum order quantity of 50 pieces.) Chinese pneumatic device related product manufacturer, founded in 1986. The company obtained ISO 9001 certification in 1998, and their products are highly regarded around the world for their stable quality.

CAD ：

2D / 3D

One-Touch Fitting KQ2 Series Reducer Elbow KQ2L

SMC

A one-touch fitting by SMC. [Features]· Improved tube insertion/removal.· Compact and lightweight.· Can be used with a vacuum pressure of -100 kPa or more.· Body shape: Total of 51 models.· Thread part material / surface treatment (with/without): 2 types.· Available surface treatment: brass (no plating), brass + electroless nickel plating. [Applications]· Use to change the tube direction from one-touch fittings by 90 degrees while reducing the size (diameter) of the tube. [See here for catalog]· Applicable tube outer diameter (metric), Release button: oval (pp. 12) circle (pp. 109)· Applicable tube outer diameter (inches), Release button: oval (pp. 36) circle (pp. 141)

CAD ：

2D / 3D

Quick-Connect Fitting, KQ2 Series, 45° Elbow Union KQ2K (Sealant / No Sealant)

SMC

SMC quick-connect fitting.[Features]・ Improved tube insertion and removal・ Compact and weight reduced[Applications]・ Used for piping in the 45 degree direction from the female thread section. Intermediate model between half union and elbow union[Please click here for the catalog]・ Applicable metric tube outer diameter, connection thread "R" release bushing, oval (P.13) perfect circle (P.111)・ Applicable tube imperial outer diameter, connection thread "NPT" release bushing, oval (P.37) perfect circle (P.142)

CAD ：

2D / 3D

Male Run Tee KQ2Y (Gasket Seal) One-Touch Fitting KQ2 Series

SMC

A one-touch fitting by SMC. [Features]· Improved tube insertion/removal.· Compact and lightweight.· Can be used with a vacuum pressure of -100 kPa or more.· Body shape: Total of 51 models.· Thread part material / surface treatment (with/without): 2 types.· Available surface treatment: brass (no plating), brass + electroless nickel plating. [Applications]· Use to branch in the same direction or at a 90 degree angle from female threads.

CAD ：

2D / 3D

One-Touch Fitting Manifold KM13

SMC

SMC quick-connect fitting.[Features]・ Piping can be made compact・ Allows centralized piping・ Single-action mount

CAD ：

2D / 3D