Lever（Shape：Knobbed Shape）

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Tension Levers

  MISUMI

  [Features]·It is a general-purpose flat type tension lever.

  • Volume Discount

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	8 ～ 16	Clamp Mechanism	Threaded / Tapped	100 ～ 150	Steel	-	30 ～ 63	Ball Knob	Horizontal	-	Black Oxide	Steel	Black Oxide	Phenol	-	-	-

  From: 719,194 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tension Lever (Stainless Steel) TL-Sus, TLF-Sus

  KONISHI

  Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.

  CAD ：

  2D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	8 ～ 12	Clamp Mechanism	Threaded / Tapped	65 ～ 97	Stainless Steel	No Set Screw Type	10 ～ 63	Ball Knob	Horizontal	-	None	Stainless Steel	None	Phenol	None	None	-

  From: 1,870,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Flat Tension Levers/With Hexagonal Socket Head/Threaded

  MISUMI

  A flat tension lever with a hex socket head. [Clamp Type]Clamp mechanism

  • Volume Discount

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	8 ～ 16	Clamp Mechanism	Threaded / Tapped	80 ～ 180	Stainless Steel / Steel	-	30 ～ 60	Ball Knob	Horizontal	-	None / Cathodic Paint, Electrostatic Paint	Stainless Steel / Steel	None	Phenol / Stainless Steel	-	-	-

  From: 659,140 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tension Lever (TLF-N/TL-N)

  IMAO CORPORATION

  In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Large clamping force can be obtained because the lever part is long.[Features]· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.· Besides the door knob, all parts are made from stainless steel, so it is robust and strong

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	M10 ～ M20	Clamp Mechanism	Threaded / Tapped	87 ～ 128	Stainless Steel / Steel	-	30 ～ 80	Ball Knob	Horizontal	-	None / Powder Coating	Stainless Steel / Steel	None / Black Oxide	Phenol	None	-	-

  From: 822,953 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tension Levers/Safety Tension Levers

  MISUMI

  A tension lever. [Applications]Clamp, "Clamp type" clamp mechanism, "Operating direction" horizontal

  • Volume Discount

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	10 ～ 16	Clamp Mechanism	Threaded	93	Steel	-	30 ～ 60	Ball Knob	Horizontal	-	None	Steel	Black Oxide	Phenol	-	-	-

  From: 1,012,088 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Tension Lever (FTF/FT)

  IMAO CORPORATION

  In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.[Features]· Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.· If interference of the lever occurs during operation, a short lever can be installed and used

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	M8 ～ M16	Clamp Mechanism	Threaded / Tapped	102 ～ 148	Stainless Steel / Steel	-	30 ～ 60	Ball Knob	Horizontal	-	None / Black Oxide	Stainless Steel / Steel	None / Black Oxide	Phenol	None	-	-

  From: 797,155 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Tension Lever_LFM/LFF

  NABEYA BI-TECH

  [Features]· For locations where there is no clear space up or down.· The handle position can be adjusted freely.· All stainless steel and steel types standard.· Large turning radius and clamping force can be obtained with lesser force.

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	8 ～ 16	Clamp Mechanism	Threaded / Tapped	100 ～ 150	Steel	-	18 ～ 60	Ball Knob	Horizontal	-	Black Oxide	Steel	Black Oxide	Phenol	None	-	-

  From: 858,510 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Latch Lever_LZY

  NABEYA BI-TECH

  Clamping lever using spiral latch. Tightening can be adjusted without any steps of moving up and down of lever.

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	10	-	Threaded	109	Stainless Steel / Steel	-	11	Ball Knob	Horizontal	Latching Mechanism	None / Black Oxide	Stainless Steel / Steel	None / Black Oxide	Phenol	None	-	-

  From: 4,022,400 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Safety Tension Lever (STF-N, ST-N)

  IMAO CORPORATION

  Normally, when the lever part is in the free state, pressing the lever pushes the serration into mesh and operation is possible. It is possible to prevent contact malfunction after tightening.[Features]· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.· Besides the door knob, all is made from stainless steel, so it is robust and strong.· In the push lock type, where the gear is used by pressing the lever, when the hand is released, the built-in spring allows the lever to return to its original position and rotate freely again, and it is safe from any incorrect handling

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	10 ～ 16	Clamp Mechanism	Threaded / Tapped	87 ～ 128	Steel	-	30 ～ 60	Ball Knob	Horizontal	-	Powder Coating	Steel	Black Oxide	Phenol	None	-	-

  From: 891,721 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Tension Lever FTR, FTF

  KONISHI

  Lever used for fixing the position. Since the lever becomes free, when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.

  CAD ：

  2D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	8 ～ 12	Clamp Mechanism	Threaded / Tapped	102 ～ 131	Steel	No Set Screw Type	16 ～ 60	Ball Knob	Horizontal	-	Black Oxide	Steel	Black Oxide	Phenol	None	None	-

  From: 738,333 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Split Hub Lever_LSH

  NABEYA BI-TECH

  You can easily fix it to the shaft simply by tightening the screw.

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	10 ～ 16	-	Round Bore	123.5 ～ 187.5	Steel	-	15.5 ～ 19.5	Ball Knob	Horizontal	Not Provided	Black Oxide	Steel	Black Oxide	Phenol	None	-	-

  From: 1,275,998 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Control Lever_LCC

  NABEYA BI-TECH

  In combination with a plunger and calculating/positioning lever.

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	10	-	Round Bore	84 ～ 106	Steel	-	15 ～ 19	Single Lever	Horizontal	Not Provided	Black Oxide	Steel	Black Oxide	Phenol	None	-	-

  From: 990,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ergonomic Control Lever (ECL)

  IMAO CORPORATION

  A gentle curve of the arm and polyamide lever handle give a gentle feel to the hands due to the hemispherical finish at the tip.[Features]· A gentle curve of the arm and a hemispherical finish of the tip gives a gentle hand grip, enabling a smooth and powerful operation.· The boss hole can be easily covered with the accessory cap after installation.· Pilot holes are processed.· ECL32 to 54 can be used in a snap system by installing the optional ball & spring.· A groove is provided in the boss for the stop pin that limits the lever operating angle to an angle of 125 ±1°

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	M6 ～ M14	-	Round Bore	67 ～ 140	Polyamide	-	-	Single Lever	Horizontal	Not Provided	None	Steel	Black Oxide	-	-	-	-

  From: 313,928 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locking Lever (LL)

  IMAO CORPORATION

  [Features]· Standard type lever handle that can be used widely.· For grip, PC type door knob is used

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	10 ～ M16	Clamp Mechanism	Tapped / Round Bore	50 ～ 100	Stainless Steel / Steel	-	-	Ball Knob	Horizontal	-	None / Coating	Stainless Steel / Steel	None / Coating	ABS Resin	None	-	-

  From: 329,185 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Handle BH

  KONISHI

  Ball handle.[Features]・ Can be used for opening and closing by lever operation[Applications]・ Can be used to rotate the mounting shaft

  CAD ：

  2D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	5	-	Round Bore	63 ～ 160	Steel	No Set Screw Type	-	Single Lever	Horizontal	Not Provided	Chrome Plating	Steel	Hard Chrome Plating	Steel	Chrome Plating	None	-

  From: 568,365 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tension Lever LTM/LTF

  NABEYA BI-TECH

  [Features]· High strength type of clamping lever.· Standardized steel and all stainless steel types.· We also manufacture products with customized specifications, such as the turning radius of the lever.· Material: finishing lever screw: S45C, tetra-iron oxide coating (black) LTM, LTF. SUS303: LTMS, LTFS. Grip (plastic pole PB): Phenol resin (black)

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	10 ～ 20	Clamp Mechanism	Threaded / Tapped	81 ～ 136	Steel	-	23 ～ 80	Ball Knob	Horizontal	-	Black Oxide	Steel	Black Oxide	Phenol	None	-	-

  From: 885,901 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Control Lever (CL)

  IMAO CORPORATION

  By using the optional CLB, you can also use the snap method with this lever handle.[Features]· The boss hole can be easily covered with the center plate accessory after installation.· Optional ball & spring can be installed, and snap method can be used.· In order to limit the lever operating angle to 125 ±1°,the groove for the snap pin is provided in the boss.· For grip, PG type is used

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	8 ～ 10	-	Round Bore	81 ～ 127	Polyamide	-	-	Single Lever	Horizontal	Not Provided	None	Steel	Black Oxide	Phenol	None	-	-

  From: 582,661 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Switch Lever (WL)

  IMAO CORPORATION

  [Features]· Standard type lever handle that can be used widely.· For grip, PG type is used

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	8 ～ 16	-	Round Bore	80 ～ 180	Steel	-	-	Single Lever	Horizontal	Not Provided	Black Oxide	Steel	Black Oxide	Phenol	None	-	-

  From: 446,551 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cam Lever (BJ167/BJ168)

  IMAO CORPORATION

  Cam lever for tightening and loosening screws without tools. [Features]· 2 types of surface treatment available black oxide coating and electroless nickel plating.· Handle of stud type cam be adjusted in any direction. [Applications]· Ideal for use in screw-tightening and loosening parts where usage is high.

  CAD ：

  2D / 3D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	8 ～ 12	Clamp Mechanism / Cam Mechanism	Round Bore	104 ～ 146	Steel	-	-	Ball Knob	Vertical	-	Black Oxide	Steel	Black Oxide	Phenol	None	-	-

  From: 1,947,320 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tension Lever TL, TLF

  KONISHI

  Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.

  CAD ：

  2D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	8 ～ 20	Clamp Mechanism	Threaded / Tapped	65 ～ 130	Steel	No Set Screw Type	10 ～ 63	Ball Knob	Horizontal	-	Black Oxide	Steel	Black Oxide	Phenol	None	None	-

  From: 956,168 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Control Lever CL

  KONISHI

  Lever used for fixing the position. Snap holes (2 places) and snap grooves (125 ± 1°) can be used on the back of the boss. The center plate of the boss surface appears as a seal, so it is possible to paste the center plate and make it look beautiful after attaching the control lever to the machine.

  CAD ：

  2D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Clamp	Knobbed Shape	8 ～ 10	Clamp Mechanism	Round Bore	81 ～ 127	Polyamide	No Set Screw Type	17 ～ 27	Single Lever	Horizontal	-	None	Steel	Black Oxide	Phenol	None	None	-

  From: 534,995 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Switch Lever SL

  KONISHI

  Add S45C sheet material to obtain shape for obtaining torque power easily. The reamer hole is the standard product at the center of the boss, so select the turning radius accordiing to each useage condition.

  CAD ：

  2D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	8 ～ 16	-	Round Bore	90 ～ 180	Steel	No Set Screw Type	13 ～ 26	Single Lever	Horizontal	Not Provided	Black Oxide	Steel	Black Oxide	Phenol	None	None	-

  From: 368,455 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locking Lever L

  KONISHI

  Add SUM22 sheet material to obtain shape for obtaining torque power easily. In the center of the boss, there are standard products with 3 types of holes namely; center hole, reamer hole, and tap hole. Select according to use conditions based on the turning radius of 50/75/100.

  CAD ：

  2D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	5 ～ 16	-	Tapped / Round Bore	50 ～ 100	Steel	No Set Screw Type	5 ～ 30	Ball Knob	Horizontal	Not Provided	Black Oxide	Steel	Black Oxide	Phenol	None	None	-

  From: 315,816 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locking Lever Stainless Steel L-Sus

  KONISHI

  Add SUM22 sheet material to obtain shape for obtaining torque power easily. In the center of the boss, there are standard products with 3 types of holes namely; center hole, reamer hole, and tap hole. Select according to use conditions based on the turning radius of 50/75/100.

  CAD ：

  2D

  Application	Shape	Mounting Section Dia. d (mm) or Nominal Dia.	Type, Clamp	Mounting Section Type	Rotating Radius R(mm)	Main Body Material	L-Shaped Clamp Lever Shape	Mounting Section, Length L(mm)	Knobbed Lever Shape	Operation Direction	Type, Operation	Main Body, Surface Treatment	Mounting Section, Material	Mounting Section, Surface Treatment	Knob Material	Knob Surface Treatment	Gap Adjustment Screw	Mounting Section Diameter C(mm)
  Operation	Knobbed Shape	5 ～ 16	-	Tapped / Round Bore	50 ～ 100	Stainless Steel	No Set Screw Type	5 ～ 30	Ball Knob	Horizontal	Not Provided	None	Stainless Steel	None	Phenol	None	None	-

  From: 747,596 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Application
Shape
Mounting Section Dia. d (mm) or Nominal Dia.
Type, Clamp
Mounting Section Type
Rotating Radius R(mm)
Main Body Material
L-Shaped Clamp Lever Shape
Mounting Section, Length L(mm)
Knobbed Lever Shape
Operation Direction
Type, Operation
Main Body, Surface Treatment
Mounting Section, Material
Mounting Section, Surface Treatment
Knob Material
Knob Surface Treatment
Gap Adjustment Screw
Mounting Section Diameter C(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	KONISHI	MISUMI	IMAO CORPORATION	MISUMI	IMAO CORPORATION	NABEYA BI-TECH	NABEYA BI-TECH	IMAO CORPORATION	KONISHI	NABEYA BI-TECH	NABEYA BI-TECH	IMAO CORPORATION	IMAO CORPORATION	KONISHI	NABEYA BI-TECH	IMAO CORPORATION	IMAO CORPORATION	IMAO CORPORATION	KONISHI	KONISHI	KONISHI	KONISHI	KONISHI
Product SeriesDòng sản phẩm	Flat Tension Levers	Tension Lever (Stainless Steel) TL-Sus, TLF-Sus	Flat Tension Levers/With Hexagonal Socket Head/Threaded	Tension Lever (TLF-N/TL-N)	Tension Levers/Safety Tension Levers	Flat Tension Lever (FTF/FT)	Flat Tension Lever_LFM/LFF	Latch Lever_LZY	Safety Tension Lever (STF-N, ST-N)	Flat Tension Lever FTR, FTF	Split Hub Lever_LSH	Control Lever_LCC	Ergonomic Control Lever (ECL)	Locking Lever (LL)	Ball Handle BH	Tension Lever LTM/LTF	Control Lever (CL)	Switch Lever (WL)	Cam Lever (BJ167/BJ168)	Tension Lever TL, TLF	Control Lever CL	Switch Lever SL	Locking Lever L	Locking Lever Stainless Steel L-Sus
CADCAD	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D	2D	2D	2D
From	719,194 VND	1,870,326 VND	659,140 VND	822,953 VND	1,012,088 VND	797,155 VND	858,510 VND	4,022,400 VND	891,721 VND	738,333 VND	1,275,998 VND	990,028 VND	313,928 VND	329,185 VND	568,365 VND	885,901 VND	582,661 VND	446,551 VND	1,947,320 VND	956,168 VND	534,995 VND	368,455 VND	315,816 VND	747,596 VND
Days to ShipSố ngày giao hàng	Same day or more	6 Day(s) or more	Same day or more	Same day or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	4 Day(s) or more	Same day or more	Same day or more	Same day or more	12 Day(s)	4 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Application	Clamp	Clamp	Clamp	Clamp	Clamp	Clamp	Clamp	Operation	Clamp	Clamp	Operation	Operation	Operation	Clamp	Operation	Clamp	Operation	Operation	Clamp	Clamp	Clamp	Operation	Operation	Operation
Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape	Knobbed Shape
Mounting Section Dia. d (mm) or Nominal Dia.	8 ～ 16	8 ～ 12	8 ～ 16	M10 ～ M20	10 ～ 16	M8 ～ M16	8 ～ 16	10	10 ～ 16	8 ～ 12	10 ～ 16	10	M6 ～ M14	10 ～ M16	5	10 ～ 20	8 ～ 10	8 ～ 16	8 ～ 12	8 ～ 20	8 ～ 10	8 ～ 16	5 ～ 16	5 ～ 16
Type, Clamp	Clamp Mechanism	Clamp Mechanism	Clamp Mechanism	Clamp Mechanism	Clamp Mechanism	Clamp Mechanism	Clamp Mechanism	-	Clamp Mechanism	Clamp Mechanism	-	-	-	Clamp Mechanism	-	Clamp Mechanism	-	-	Clamp Mechanism / Cam Mechanism	Clamp Mechanism	Clamp Mechanism	-	-	-
Mounting Section Type	Threaded / Tapped	Threaded / Tapped	Threaded / Tapped	Threaded / Tapped	Threaded	Threaded / Tapped	Threaded / Tapped	Threaded	Threaded / Tapped	Threaded / Tapped	Round Bore	Round Bore	Round Bore	Tapped / Round Bore	Round Bore	Threaded / Tapped	Round Bore	Round Bore	Round Bore	Threaded / Tapped	Round Bore	Round Bore	Tapped / Round Bore	Tapped / Round Bore
Rotating Radius R(mm)	100 ～ 150	65 ～ 97	80 ～ 180	87 ～ 128	93	102 ～ 148	100 ～ 150	109	87 ～ 128	102 ～ 131	123.5 ～ 187.5	84 ～ 106	67 ～ 140	50 ～ 100	63 ～ 160	81 ～ 136	81 ～ 127	80 ～ 180	104 ～ 146	65 ～ 130	81 ～ 127	90 ～ 180	50 ～ 100	50 ～ 100
Main Body Material	Steel	Stainless Steel	Stainless Steel / Steel	Stainless Steel / Steel	Steel	Stainless Steel / Steel	Steel	Stainless Steel / Steel	Steel	Steel	Steel	Steel	Polyamide	Stainless Steel / Steel	Steel	Steel	Polyamide	Steel	Steel	Steel	Polyamide	Steel	Steel	Stainless Steel
L-Shaped Clamp Lever Shape	-	No Set Screw Type	-	-	-	-	-	-	-	No Set Screw Type	-	-	-	-	No Set Screw Type	-	-	-	-	No Set Screw Type	No Set Screw Type	No Set Screw Type	No Set Screw Type	No Set Screw Type
Mounting Section, Length L(mm)	30 ～ 63	10 ～ 63	30 ～ 60	30 ～ 80	30 ～ 60	30 ～ 60	18 ～ 60	11	30 ～ 60	16 ～ 60	15.5 ～ 19.5	15 ～ 19	-	-	-	23 ～ 80	-	-	-	10 ～ 63	17 ～ 27	13 ～ 26	5 ～ 30	5 ～ 30
Knobbed Lever Shape	Ball Knob	Ball Knob	Ball Knob	Ball Knob	Ball Knob	Ball Knob	Ball Knob	Ball Knob	Ball Knob	Ball Knob	Ball Knob	Single Lever	Single Lever	Ball Knob	Single Lever	Ball Knob	Single Lever	Single Lever	Ball Knob	Ball Knob	Single Lever	Single Lever	Ball Knob	Ball Knob
Operation Direction	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal	Vertical	Horizontal	Horizontal	Horizontal	Horizontal	Horizontal
Type, Operation	-	-	-	-	-	-	-	Latching Mechanism	-	-	Not Provided	Not Provided	Not Provided	-	Not Provided	-	Not Provided	Not Provided	-	-	-	Not Provided	Not Provided	Not Provided
Main Body, Surface Treatment	Black Oxide	None	None / Cathodic Paint, Electrostatic Paint	None / Powder Coating	None	None / Black Oxide	Black Oxide	None / Black Oxide	Powder Coating	Black Oxide	Black Oxide	Black Oxide	None	None / Coating	Chrome Plating	Black Oxide	None	Black Oxide	Black Oxide	Black Oxide	None	Black Oxide	Black Oxide	None
Mounting Section, Material	Steel	Stainless Steel	Stainless Steel / Steel	Stainless Steel / Steel	Steel	Stainless Steel / Steel	Steel	Stainless Steel / Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel / Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel
Mounting Section, Surface Treatment	Black Oxide	None	None	None / Black Oxide	Black Oxide	None / Black Oxide	Black Oxide	None / Black Oxide	Black Oxide	Black Oxide	Black Oxide	Black Oxide	Black Oxide	None / Coating	Hard Chrome Plating	Black Oxide	Black Oxide	Black Oxide	Black Oxide	Black Oxide	Black Oxide	Black Oxide	Black Oxide	None
Knob Material	Phenol	Phenol	Phenol / Stainless Steel	Phenol	Phenol	Phenol	Phenol	Phenol	Phenol	Phenol	Phenol	Phenol	-	ABS Resin	Steel	Phenol	Phenol	Phenol	Phenol	Phenol	Phenol	Phenol	Phenol	Phenol
Knob Surface Treatment	-	None	-	None	-	None	None	None	None	None	None	None	-	None	Chrome Plating	None	None	None	None	None	None	None	None	None
Gap Adjustment Screw	-	None	-	-	-	-	-	-	-	None	-	-	-	-	None	-	-	-	-	None	None	None	None	None
Mounting Section Diameter C(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…