• You can add up to 6 items per a category to the compare list. Compare

  

  Tapped Punches

  MISUMI

  ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapped Jector Punches Normal, WPC treatment

  MISUMI

  This is a type of punch that is fixed with a bolt. It is easy to adjust the punch height after re-sharpening the cutting edge. A jetter pin for removing scraps is built into the punch.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Tapped Punches

  MISUMI

  ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps! ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches. ・A punch with a guide section separate from the cutting edge. Please use this when the required cutting edge length B for the guide cannot be secured with the cutting edge diameter P. ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Shank type
Material
Tip shape
Heavy-load punches
Jector
Surface treatment
Shank (mounting part) shape

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	Tapped Punches	Tapped Jector Punches Normal, WPC treatment	Double Stepped Tapped Punches
CADCAD	2D / 3D	2D / 3D	2D / 3D
From	-	-	-
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật
Shank type	Single-stepped	Single-stepped	Double-stepped
Material	SKD11 Equivalent / Powdered high-speed steel	SKD11 Equivalent	SKD11 Equivalent / Powdered high-speed steel
Tip shape	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G
Heavy-load punches	No	No	No
Jector	None	Standard type	None
Surface treatment	None	None	None
Shank (mounting part) shape	Tapped	Tapped	Tapped

Loading...Tải…