• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier Caliper, ABSOLUTE Digimatic Caliper 500 Series

  MITUTOYO

  • ABSOLUTE electromagnetic induction linear encoder system is introduced(except for 0 -300mm/0 - 12" models).• New ergonomic design with finger rest.• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale for comparison measurements. This button will also allow return tothe absolute (ABS) mode and display of the true position from the origin(usually jaws closed point).• Large and clear LCD readout.• Smooth slider movement makes for comfortable operation.• 18,000 hours battery life.• Allows step measurement.• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grindingstones, etc.• Allows integration into statistical process control and measurement systems for modelswith measurement data output connector.

  From: 3,838,462 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LR Vernier Caliper

  NIIGATA SEIKI (SK)

  Forward/backward Vernier scales improve performance with the 2 prong approach, as they enable measurements to be made with both left and right hands.[Features]· Upper/lower 2-tier type Vernier scale.· Supports both right and left hands, and measurement can be performed with either hand.· Forward/backward Vernier scales improve performance with the 2 prong approach.· Silver finish.[Applications]· Can be used for measuring outside, inside, level difference and depth.

  From: 1,348,315 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Vernier Calipers DT Type

  NIIGATA SEIKI (SK)

  Digital calipers for measuring outer diameter, inner diameter, and level difference that can also be used for measuring depth thanks to use of a depth bar.[Features]· Standard type digital vernier calipers.· The digital display is easy to see.· With hold function.· With auto off function. (Approximately 20 minutes)[Applications]· Can be used for measuring outer diameter, inner diameter, level difference and depth.

  From: 2,201,292 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Vernier Calipers (High-Speed Model LCD)

  TRUSCO NAKAYAMA

  [Features]· Features a high-speed model LCD.· Digital display for clear viewing.· With hold function.· Comes with complete inspection tables.[Applications]· Exterior measurements, interior measurements, step measurements, depth measurements.

  From: 1,712,247 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper E-RX

  NAKAMURASEISAKU

  [Features]· The pitch of circular holes can be measured by direct reading.· Made of stainless steel (SUS420J2).[Applications]· For measuring at various machining sites.

  From: 18,771,859 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Vernier Caliper, Long Jaw Caliper E-LSM

  NAKAMURASEISAKU

  [Features]· Ideal for measuring diameters for spheres, pipes, etc.· Long jaw calipers with "long length jaw" ideal for measuring large diameter pipes, etc.· Outer jaw length is 1/2 or more of the measurement length, ideal for diameter measurement of spheres, pipes, etc.· Printer output function included

  From: 81,702,082 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  Digital Vernier Calipers With Large Text And Hold Function (150 mm / 200 mm / 300 mm / 450 mm / 600 mm / 1,000 mm)

  SHINWASOKUTEI

  Digital indicator calipers where there is no need to read the main scale. Equipped with a hold convenient for measuring places where the LCD unit is not visible. The minimum read value is 0.01 mm, ideal for extremely precise work.[Features] · With zero setting function to enable relative measurements and indirect measurements. · A hold function is useful when the display is not visible. · Drip-proof unit parts. (Can be used when wet if immediately wiped dry.)[Applications] · External measurements, internal measurements, step measurements, depth measurements

  From: 10,292,695 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Vernier Calipers, Left-Handed

  NIIGATA SEIKI (SK)

  Digital calipers dedicated for left-handed people.[Features]· Clearly visible digital display.· Material: Stainless steel· Power supply: SR44 (silver oxide battery) x 1 included for testing.[Applications]· Can be used for measuring outside, inside, level difference and depth.

  From: 3,929,276 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier Caliper

  SHINWASOKUTEI

  Standard calipers.[Features]· Standard type and easy to use.[Applications]· Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  From: 698,225 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  [Kanon] Vernier Caliper, Flat Head Caliper E-PITA

  NAKAMURASEISAKU

  The flat head makes it easy to measure from any corner.[Features]·The design has been completely redesigned! A wide variety of sizes are also available.·Digital type pita calipers.·The display is large and easy to read.List of vernier calipers List of standard vernier calipers List of digital vernier calipers See how to use vernier caliper

  From: 2,573,397 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  [Kanon] Flat Head Caliper PITA

  NAKAMURASEISAKU

  [Features]· 21st century standard calipers, Pita calipers.· "Flat head" enables easy measurement from any corner.· PITA15: The main scale grooves on the top and bottom scales reduce diffuse reflection on the surface with the scale markings.· Because the green color is easy on the eyes, they don't get tired.

  From: 1,170,270 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier Caliper, Digital CR Calipers

  TOEIKOGYO

  Switching between C (chamfer) and R (rounding) measurement can be performed with button operation. 2 measurement methods, absolute measurement (ABS) and relative measurement, can be performed. 3 With master gauge for absolute value calibration (Φ20 ±3 μm) included.

  From: 6,719,153 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper RM-S

  NAKAMURASEISAKU

  [Features]· Ideal for measuring the pitch of small diameter holes.· Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch"

  From: 13,490,130 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper E-RM60B

  NAKAMURASEISAKU

  The "measuring length of 600 mm" makes it a large digital vernier calipers ideal for measuring isometric holes in long workpieces, etc.[Features]・ It is a long vernier calipers that can measure the pitch between 2 points of equal diameter holes and the measurement from the end face to the center of the hole・ Dedicated gauge block is attached・ With printer output function[Applications]・ For measuring steel, wood, plastic materials, processed materials of all materials, hole pitch. Ideal for home construction

  From: 56,413,343 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Digital Blade Caliper E-BL

  NAKAMURASEISAKU

  [Features]· Ideal for measuring the gap between grooves for narrow grooved workpieces.· Made of stainless steel (SUS420J2).[Applications]· For measuring the gap between grooves for narrow workpieces.

  From: 13,104,788 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier Caliper, Plastic Digital Calipers

  A&D

  Lightweight, easy-to-use plastic vernier calipers which can be read directly after measurement.[Features]· Vernier calipers with a large digital liquid crystal display.· 0.01 mm display resolution.· Equipped with data hold function and auto power off function.· A plastic type to prevent scratching the measured object.· Lightweight, safe, and easy to carry.[Applications]· For inspection work, design measurements, civil engineer measurements, etc.· For agriculture and fishery.

  From: 634,420 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier Calipers

  KTC(KYOTO TOOL)

  [Features]· Adopts long vernier for easy reading.· Gradation surface is stepped to prevent particles from entering the drive portion.

  From: 2,014,510 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier Caliper, Left Handed

  NIIGATA SEIKI (SK)

  Calipers dedicated for left-handed people.[Features]· Material: Stainless steel· Silver finish.[Applications]· Can be used for measuring outside, inside, level difference and depth.

  From: 2,295,717 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Silver Vernier Caliper TVC, Standard-Type

  NIIGATA SEIKI (SK)

  Vernier integrated type standard M calipers with an easy-to-read scale that enable measuring O.D., I.D., steps, and depth.[Features]· High cost performance model.· M type standard calipers.· Vernier integrated type with a scale that is easy to read.· Silver finish.[Applications]· Can be used for measuring outer diameter, inner diameter, level difference and depth (4-way).

  From: 10,374,006 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Vernier Calipers, High Grade

  SHINWASOKUTEI

  High-class, high-precision mini calipers that can be used for measuring various dimensions, small as they are.[Features]· Small, conveniently portable calipers.[Applications]· Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  From: 555,109 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C Surface Vernier Caliper

  TOEIKOGYO

  [Features]· With scale lines calculated based on the Pythagorean theorem, C surface dimensions and welding dimensions can be measured accurately and quickly.· Vernier scale enables C-surface dimension measurements from 0.1 mm to 15 mm.[Applications]· Milling, Weld Beveling, Lathe Machining, Scribing[Material]· Main unit: SPHC-P, phosphate galvanizing treatment· Main Scale: SUS420J2, Silver Plating

  From: 1,500,956 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Vernier Caliper, Centerline Caliper E-RM-J

  NAKAMURASEISAKU

  Two measurements are possible. Multifunctional round hole pitch vernier caliper.[Features]·Both the hole-to-hole pitch and the pitch from the end face to the hole can be "directly read with a single tool".·It can be read directly by offset input.·By setting the upper offset value (15.00 mm) and the lower offset value (7.50 mm), this machine displays the measured pit dimensions in actual size, eliminating the need to calculate additions and subtractions to the displayed values like conventional products. has become much easier to use.·With this single vernier caliper, you can directly read the pitch from hole to hole and the pitch from the edge to the hole.[Applications]·Sheet metal processing products and construction housing.·The upper and lower offset values can be easily set by pressing the "SET" button.List of vernier calipers List of hole pitch vernier calipers List of digital vernier calipers See how to use vernier caliper

  From: 21,361,582 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Standard Calipers M

  NAKAMURASEISAKU

  Standard vernier calipers for regular measurements

  From: 12,418,513 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Vernier Caliper, Long Jaw Caliper LSM

  NAKAMURASEISAKU

  [Features]· Ideal for measuring diameters for spheres, pipes, etc.· Ideal for diameter measurement of large bore pipes, etc.

  From: 7,210,170 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier caliper with product certificate (product body and JCSS calibration certificate)

  SHINWASOKUTEI

  Four measurements possible: outer diameter, inner diameter, depth, and step measurement. A standard type vernier caliper that is easy to use.

  From: 2,981,951 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier Caliper, Plastic Calipers, Free-stage Scale, Light

  NIIGATA SEIKI (SK)

  The stepped scale on the calipers prevents erroneous reading.[Features]· A plastic product that can be used casually.· A stepped scale with easy-to-read 1 mm graduations has been adopted.· With convenient 1 mm read-off vernier for when detailed numbers are unnecessary.· With blank sticker to customize the scale to suit the application.· With magnet and strap hole convenient for storage and carrying.[Applications]· Used for measuring outer diameter, inner diameter, level difference and depth.

  From: 154,110 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Digital Vernier Calipers (Maximum Measurement Length 150 to 200 mm)

  MISUMI

  A standard-type digital vernier caliper.· Usable for measurement of outer diameter, internal diameter, step difference, and depth.· Digital display for easy reading.· With holding function.

  From: 2,070,603 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Vernier Caliper DVC

  NIIGATA SEIKI (SK)

  Calipers with a Vernier scale that can be read with a dial, preventing parallax errors and misreadings.[Features]· A dial is incorporated into the calipers to enable the measured value to be read directly, without using the Vernier scale.· Four measurements possible with depth bar: outer diameter, inner diameter, depth, and step measurement.· Uses a clearly visible yellow scale plate.· Material: Stainless steel.· Silver finish.[Applications]· Outer diameter, inner diameter, level difference and depth measurements are possible.

  From: 2,187,521 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dial Vernier Calipers With Carbide Tip

  NIIGATA SEIKI (SK)

  Calipers with carbide tips (inner and outer measurement surface), ideal for measuring rough machined parts, castings, grindstones, etc.[Features]· A dial is incorporated into the calipers to enable the measured value to be read directly, without using the Vernier scale.· Four measurements possible with depth bar: outer diameter, inner diameter, depth, and step measurement.· Silver finish.[Applications]· Ideal for measuring castings, grindstones, etc.· Can be used for measuring outer diameter, inner diameter, level difference and depth.

  From: 3,403,248 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Long Vernier Calipers

  NIIGATA SEIKI (SK)

  Calipers with fine feed function, perfect for measuring large workpieces.[Features]· High cost performance model.· The digital display is easy to see.· With preset function.· Vernier is capable of fine movement feeding.[Applications]· Can be used for measuring outside, inside, and level difference.

  From: 14,847,016 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Portable Vernier Calipers

  SHINWASOKUTEI

  [Features]・ It is a small type vernier calipers and convenient to carry[Applications]・ For outer diameter measurement, inner diameter measurement, depth measurement, level difference measurement

  From: 291,325 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital calipers solar panel

  SHINWASOKUTEI

  Vernier calipers which reduce battery consumption with 2-way power source type (solar panels/lithium batteries) for various dimensional measurements.[Features]· Uses stainless steel jaw.· Achieves high accuracy of ±0.03 mm.· Solar panel is activated to reduce battery consumption when ambient illumination is 200 lx or more.· With zero setting function to enable relative measurements and indirect measurements.[Applications]· Convenient for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.· The minimum read value is 0.01 mm, ideal for extremely precise work.

  From: 1,426,099 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vernier Caliper, 573 / 536 Series Hole Pitch For Offset Calipers NTD10P / NT10P

  MITUTOYO

  The dimension between hole centers can be quickly measured. With offset function for direct reading. Equipped with a measurement data output terminal, which can be used to configure a statistical process control system or measurement system.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] ULJ Caliper with Judgment Function

  NAKAMURASEISAKU

  [Features]· "Judgment function" allows pass/fail to be determined instantly.· When dividing go/no-go products for mass production parts, work time can be significantly reduced.· By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.· Anyone can make measurements, simply and quickly.· The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  From: 3,308,823 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Large Caliper EMA

  NAKAMURASEISAKU

  [Features]· A standard long digital vernier caliper.· Made of stainless steel (SUS420J2).[Applications]· For measuring turned workpieces.

  From: 25,391,186 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Vernier Caliper, Dial Scale Caliper DMK-J

  NAKAMURASEISAKU

  [Features]· Rack and pinion type caliper.· The improved shock resistance allows use with no concerns.· Pointer needle 1 revolution 1 mm.· Made of stainless steel (SUS420J2).[Applications]· Used for on-site measurements of precision machining.

  From: 2,056,638 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper E-RZ

  NAKAMURASEISAKU

  [Features]· Hole pitch can be "directly read digitally" with simple operation.· The hole pitch from the edge face can be measured by direct reading.· Can measure holes of maximum φ20 mm.· Printer output function included

  From: 18,771,859 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper E-RX-J

  NAKAMURASEISAKU

  [Features]· The pitch of circular holes can be measured by direct reading.· Pitch measurement is also possible between stepped holes.· Made of stainless steel (SUS420J2).[Applications]· For measurement at hole drilling sites.

  From: 36,960,466 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper RM-DX

  NAKAMURASEISAKU

  [Features]· Ideal for measuring the pitch between holes of the same diameter.· Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  From: 11,678,257 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper RM-2

  NAKAMURASEISAKU

  [Features]· Ideal for pitch measurement of holes with different diameters.· Round hole pitch calipers of “offset type," with main scale probe moving vertically.· Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.

  From: 15,637,042 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper E-RM30DX

  NAKAMURASEISAKU

  Digital round hole pitch vernier caliper for 3 ways.[Features]・ Multi-functional direct-reading digital round-hole pitch vernier calipers capable of "3 measurements" by replacing the probe・ Direct reading digital・ Measuring length is 300 mm[Applications]・ For measuring steel, wood, plastic materials, processed materials of all materials, hole pitch. Ideal for home construction

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Centerline Caliper E-RM-2

  NAKAMURASEISAKU

  [Features]· Ideal for measuring hole pitch: Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch" and "offset types" because the measuring element moves vertically.· Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.· A dedicated gauge block is supplied as an accessory.· Printer output function included

  From: 24,964,526 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  [Kanon] Standard Calipers SM

  NAKAMURASEISAKU

  Mini Calipers and Standard Long Calipers[Features]· Standard vernier calipers for regular measurements.· Standard scale type calipers with "green lines" that don't tire the eyes

  From: 1,025,499 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Standard Calipers M-60P

  NAKAMURASEISAKU

  [Features]· Standard vernier calipers for regular measurements.· Lightweight calipers which, despite a long measurement length, can be held comfortably in one hand.· Reasonably priced too

  From: 8,951,527 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Kanon] Caliper with Curre Jaw RA

  NAKAMURASEISAKU

  [Features]· Made of stainless steel (SUS420J2).· Ideal for measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in pockets.[Applications]· For measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in deep pockets.

  From: 17,216,430 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Maximum Measurement Length (Range Selection)(mm)
Display Method
Type
Special Caliper Shape
Output terminal for measuring data: with or without
With/Without Depth Bar
Waterproof Function
Solar Panel
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	TRUSCO NAKAYAMA	NAKAMURASEISAKU	NAKAMURASEISAKU	SHINWASOKUTEI	NIIGATA SEIKI (SK)	SHINWASOKUTEI	NAKAMURASEISAKU	NAKAMURASEISAKU	TOEIKOGYO	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	A&D	KTC(KYOTO TOOL)	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	SHINWASOKUTEI	TOEIKOGYO	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	SHINWASOKUTEI	NIIGATA SEIKI (SK)	MISUMI	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	SHINWASOKUTEI	SHINWASOKUTEI	MITUTOYO	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU	NAKAMURASEISAKU
Product SeriesDòng sản phẩm	Vernier Caliper, ABSOLUTE Digimatic Caliper 500 Series	LR Vernier Caliper	Digital Vernier Calipers DT Type	Digital Vernier Calipers (High-Speed Model LCD)	[Kanon] Centerline Caliper E-RX	[Kanon] Vernier Caliper, Long Jaw Caliper E-LSM	Digital Vernier Calipers With Large Text And Hold Function (150 mm / 200 mm / 300 mm / 450 mm / 600 mm / 1,000 mm)	Digital Vernier Calipers, Left-Handed	Vernier Caliper	[Kanon] Vernier Caliper, Flat Head Caliper E-PITA	[Kanon] Flat Head Caliper PITA	Vernier Caliper, Digital CR Calipers	[Kanon] Centerline Caliper RM-S	[Kanon] Centerline Caliper E-RM60B	[Kanon] Digital Blade Caliper E-BL	Vernier Caliper, Plastic Digital Calipers	Vernier Calipers	Vernier Caliper, Left Handed	Silver Vernier Caliper TVC, Standard-Type	Mini Vernier Calipers, High Grade	C Surface Vernier Caliper	[Kanon] Vernier Caliper, Centerline Caliper E-RM-J	[Kanon] Standard Calipers M	[Kanon] Vernier Caliper, Long Jaw Caliper LSM	Vernier caliper with product certificate (product body and JCSS calibration certificate)	Vernier Caliper, Plastic Calipers, Free-stage Scale, Light	Digital Vernier Calipers (Maximum Measurement Length 150 to 200 mm)	Dial Vernier Caliper DVC	Dial Vernier Calipers With Carbide Tip	Digital Long Vernier Calipers	Portable Vernier Calipers	Digital calipers solar panel	Vernier Caliper, 573 / 536 Series Hole Pitch For Offset Calipers NTD10P / NT10P	[Kanon] ULJ Caliper with Judgment Function	[Kanon] Large Caliper EMA	[Kanon] Vernier Caliper, Dial Scale Caliper DMK-J	[Kanon] Centerline Caliper E-RZ	[Kanon] Centerline Caliper E-RX-J	[Kanon] Centerline Caliper RM-DX	[Kanon] Centerline Caliper RM-2	[Kanon] Centerline Caliper E-RM30DX	[Kanon] Centerline Caliper E-RM-2	[Kanon] Standard Calipers SM	[Kanon] Standard Calipers M-60P	[Kanon] Caliper with Curre Jaw RA
From	3,838,462 VND	1,348,315 VND	2,201,292 VND	1,712,247 VND	18,771,859 VND	81,702,082 VND	10,292,695 VND	3,929,276 VND	698,225 VND	2,573,397 VND	1,170,270 VND	6,719,153 VND	13,490,130 VND	56,413,343 VND	13,104,788 VND	634,420 VND	2,014,510 VND	2,295,717 VND	10,374,006 VND	555,109 VND	1,500,956 VND	21,361,582 VND	12,418,513 VND	7,210,170 VND	2,981,951 VND	154,110 VND	2,070,603 VND	2,187,521 VND	3,403,248 VND	14,847,016 VND	291,325 VND	1,426,099 VND		3,308,823 VND	25,391,186 VND	2,056,638 VND	18,771,859 VND	36,960,466 VND	11,678,257 VND	15,637,042 VND		24,964,526 VND	1,025,499 VND	8,951,527 VND	17,216,430 VND
Days to ShipSố ngày giao hàng	Same day or more	5 Day(s) or more	9 Day(s)	4 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	12 Day(s)	8 Day(s) or more	9 Day(s)	7 Day(s) or more	8 Day(s) or more	9 Day(s)	9 Day(s)	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	8 Day(s)	9 Day(s) or more	4 Day(s) or more	6 Day(s) or more	12 Day(s)	7 Day(s) or more	9 Day(s)	7 Day(s) or more	Quote	9 Day(s)	9 Day(s)	4 Day(s) or more	9 Day(s) or more	9 Day(s)	4 Day(s) or more	6 Day(s) or more	Quote	9 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more
Maximum Measurement Length (Range Selection)(mm)	0~150 / 0~200 / 0~300 / 0~600 / 0~1000 / 0~100 / 0~450	~100 / 101 to 150 / 151 to 200	101 to 150 / 151 to 200 / 201~300	~100 / 101 to 150 / 151 to 200 / 201~300	151 to 200 / 201~300	501 to 700	-	101 to 150 / 151 to 200	101 to 150 / 151 to 200 / 201~300	~100 / 101 to 150 / 151 to 200 / 201~300 / 301~500	~100 / 101 to 150 / 151 to 200 / 201~300 / 301~500	-	101 to 150	501 to 700	101 to 150	101 to 150	-	101 to 150	501 to 700 / 701 to 1000	~100	~100	101 to 150 / 151 to 200 / 201~300	301~500 / 501 to 700 / 701 to 1000	101 to 150 / 151 to 200 / 201~300 / 301~500 / 501 to 700	~100 / 101 to 150 / 151 to 200 / 201~300	~100	101 to 150	101 to 150 / 151 to 200 / 201~300	101 to 150 / 151 to 200 / 201~300	301~500 / 501 to 700 / 701 to 1000 / 1001 or More	~100	101 to 150 / 151 to 200	-	101 to 150 / 151 to 200 / 201~300	501 to 700 / 701 to 1000	101 to 150 / 151 to 200 / 201~300	151 to 200 / 201~300	201~300	101 to 150 / 151 to 200 / 201~300 / 501 to 700 / 701 to 1000	101 to 150 / 201~300 / 501 to 700 / 701 to 1000	201~300	101 to 150 / 201~300 / 501 to 700	~100 / 701 to 1000 / 1001 or More	501 to 700	101 to 150 / 151 to 200
Display Method	Digital	Vernier (Analog)	Digital	Digital	Digital	Digital	Digital	Digital	Vernier (Analog)	Digital	Vernier (Analog)	Digital	Vernier (Analog)	Digital	Digital	Digital	Vernier (Analog)	Vernier (Analog)	Vernier (Analog)	Vernier (Analog)	Vernier (Analog)	Digital	Vernier (Analog)	Vernier (Analog)	Vernier (Analog)	Vernier (Analog)	Digital	Dial	Dial	Digital	Vernier (Analog)	Digital	Vernier (Analog)	Digital	Digital	Dial	Digital	Digital	Vernier (Analog)	Vernier (Analog)	Digital	Digital	Vernier (Analog)	Vernier (Analog)	Vernier (Analog)
Type	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Special Calipers	Special Calipers	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Special Calipers	Special Calipers	Special Calipers	Special Calipers	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Special Calipers	Special Calipers	Standard caliper	Special Calipers	Standard caliper	Standard caliper / Special Calipers	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Standard caliper	Special Calipers	Special Calipers	Special Calipers	Special Calipers	Special Calipers	Special Calipers	Standard caliper	Standard caliper	Special Calipers
Special Caliper Shape	-	-	-	-	Hole Pitch Calipers	Long Jaw Caliper	-	-	-	-	-	Other	Hole Pitch Calipers	Hole Pitch Calipers	Pointed Calipers	-	-	-	-	-	Other	Hole Pitch Calipers	-	Long Jaw Caliper	-	Other	-	-	-	-	-	-	Long Jaw Caliper	-	-	-	Hole Pitch Calipers	Hole Pitch Calipers	Hole Pitch Calipers	Hole Pitch Calipers	Hole Pitch Calipers	Hole Pitch Calipers	-	-	Center Distance Vernier Caliper
Output terminal for measuring data: with or without	Available	NA	NA	NA	Available	Available	NA	NA	NA	NA	NA	NA	NA	Available	Available	-	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	Available	NA	NA	NA
With/Without Depth Bar	Available / NA	Available	Available	Available	NA	NA	NA	Available	Available	Available / NA	Available / NA	NA	NA	NA	Available	NA	Available	Available	NA	Available	NA	NA	NA	NA	Available	NA	Available	Available	Available	NA	Available	Available	NA	Available	NA	Available	NA	NA	NA	NA	NA	NA	Available / NA	NA	NA
Waterproof Function	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA
Solar Panel	NA	-	-	NA	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	-	NA	-	-	NA	NA	NA	NA	NA	NA	-	-	-	-	-	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	No	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…