Chamfering / Centering Tools（Peripheral Blade Y/N：NA Page4）

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,544,838 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,451,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° ALD Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 2,149,554 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Miniature Hard SP 90° ALT Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 1.5	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	ALT	-

  From: 1,937,884 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit A Type 60゜

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 3	60	Centering (Positioning)	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 654,879 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 1	60	Centering (Positioning)	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	Other	-

  From: 937,762 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide HG Center Drill Bit, A Type 90°

  IWATA TOOL

  High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.2 ～ 3	90	Centering (Positioning)	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,289,496 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 120°

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: 371,121 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 120°, ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.4 ～ 16	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 545,306 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 120°, Long Type, ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 1,211,005 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°, Long Type ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 4	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 1,358,151 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Bit, B-Type, ALD Coating

  IWATA TOOL

  [Features]· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.· Speed can be enhanced and life can be extended.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 6.3	60	Centering (Positioning)	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Double-edged	NA	Available	Other	-

  From: 2,043,522 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momimen Nano

  FUJIGEN

  [Features]· Smallest class in the industry. A screw-on type, the smallest class in the industry thanks to its industry-smallest class tip (underneck diameter of φ6 mm).· Interference of vise, clamp and the like can be avoided.· Capable of machining previously unreachable locations.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6 ～ 7.4	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,829,024 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Momimen

  FUJIGEN

  [Features]· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	13.5 ～ 16.15	90 ～ 118	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 3,347,380 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Decamomi

  FUJIGEN

  [Features]· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	22.5 ～ 26.6	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 5,749,128 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  60° Momimen

  FUJIGEN

  [Features]· A throw-away type requiring only a tip change (no tool correction required).· This tool allows C-chamfering and conical gouging, while reducing the number of tools used in ATC tool changes, and improving machining speed and productivity.· The shank diameter is φ16 and the cutting edge diameter is φ12, making it suitable for 60° chamfering in tight spaces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	11.88	60	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 4,297,732 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Samurai

  FUJIGEN

  [Features]· Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.· Significantly reduces running cost thanks to its high strength and improved abrasion resistance.· Achieves high runout accuracy within 5/1,000 mm.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	4 ～ 10	90	Centering (Positioning) / Chamfering/Horizontal	Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,714,526 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini eco

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	10.3 ～ 12.3	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,349,618 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momi Eco

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	14.2 ～ 17.1	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 3,347,380 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ecomen

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	22 ～ 26.6	90 ～ 120	Centering (Positioning) / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 4,297,732 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini eco 2

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16.5 ～ 18.6	30 ～ 60	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 5,010,447 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Momi Eco 2

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	22.3 ～ 25.3	30 ～ 60	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 6,673,318 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ecomen 2

  FUJIGEN

  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	34.1 ～ 36.9	30 ～ 60	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	Non-Coated	-

  From: 8,336,385 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter

  FUJIGEN

  [Features]· Wide variety. Angle can be selected from 15° to 75° (5° increments) according to applications.· Tips are available in many types to support diverse workpieces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	29.9 ～ 37.9	15 ～ 70	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 8,336,385 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Young Men

  FUJIGEN

  [Features]· C15 chamfering. An excellent finish without chattering after one round of chamfering.· Chamfering performance next only to that of "Gentlemen" at a price equivalent to "Chamfering Cutter".

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	58.2 ～ 62.2	30 ～ 60	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 8,617,104 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Gentlemen

  FUJIGEN

  [Features]· The longest blade length. It is also possible to machine difficult-to-cut materials with a unique breaker with a tip blade length of 30 mm.· Available in 13 angles from 15° to 75°.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	50.7 ～ 73.3	15 ～ 75	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 15,463,535 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kame Cutter

  FUJIGEN

  [Features]· Reduction of work time. : The special tip shape enables high-feed processing

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	34.9	45	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 9,145,728 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Uratorimen-C

  FUJIGEN

  This tool is specialized for back chamfering in drilling and edge chamfering.The insert with chip breaker provides excellent sharpness.Since the insert is replaceable, there is no need to re-grind it.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6.2 ～ 14	45	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 4,936,698 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi Angle Mill

  FUJIGEN

  [Features]· Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.· 0° to 90° at 5° pitch for easy, reliable angle adjustment

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	0–90	Chamfering/Horizontal / V Groove	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 13,935,240 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Menmen

  FUJIGEN

  [Features]· Small diameter type. Small diameter type supporting smaller diameter machining than conventional chamfer cutters.· Angle can be selected from 15° to 75° (5° increments) according to applications.· Tips are available in many materials to support diverse workpieces.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	13.5 ～ 18.2	15 ～ 75	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 4,297,732 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Baitender

  FUJIGEN

  [Features]· Turning tool type. Telescopic turning tool enables a wide range of chamfering.· Hole chamfering capacity: φ28 mm - φ134 mm.· Uses the T32 type tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	49.85～134.6	45	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 6,932,594 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Baitender dedicated arm

  FUJIGEN

  It is a dedicated accessory for the Baitender.A wide area of chamfering is possible with the telescopic tool bit.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	45	Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,613,026 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Cutting Bit

  FUJIGEN

  [Features]・ Easy for R change: Various round chamfering processes are possible by interchangeable inserts

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5 to 4

  From: 8,794,706 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R0.5 to R5 and also for small diameter round chamfering.Using Fujigen's unique negative/positive method, it is possible to cut R5 in a single process.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: 3,822,654 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R Special

  FUJIGEN

  Replaceable insert for round chamfering of R0.5 to R5.Carbide insert that can be used on 4 sides with 1 insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	56	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5~5

  From: 10,712,167 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Nouveau Jr.

  FUJIGEN

  Single flute replaceable insert for round chamfering of R5 to R10.Fujigen's original negative/positive method is used, so it is possible to cut R10 in a single process even with compact machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	35.4	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	5–10

  From: 4,297,732 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  R-Nouveau

  FUJIGEN

  Various round chamfering is possible by exchanging the tip.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	69.2	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	5–10

  From: 11,424,686 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RC Hand Cutter

  FUJIGEN

  Round chamfering and C chamfering of R1, R2, and R3 are possible by exchanging the insert.The unique insert replacement method makes insert replacement fast and accurate.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	25	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	1–3

  From: 3,822,654 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ryanmencut R

  FUJIGEN

  [Features]· Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.· Mini R is for front only.· Uses a tip that allows 8 corners to be used.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	30 ～ 48	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	0.5~5 ～ 1–5

  From: 9,524,178 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini R

  FUJIGEN

  8 corners of an insert can be used.Round chamfering and C chamfering are possible by exchanging the insert.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16	-	Round Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	1–5

  From: 3,822,654 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]· Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.· Finest surface finish without any chatter marks.[Applications]· Work materials: Aluminum, stainless steel, iron, resin, copper.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: 694,616 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink (Titanium Coating)【1-6 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]· It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.· Its surface has high hardness due to the surface titanium coating and has improved heat and wear resistance as well as sharpness compared to cobalt high-strength steel.· It easily expels chips because it uses 3 flute edges, providing a beautiful finish.[Applications]· Work materials: Iron, casting, stainless steel.· Chamfering.· Deburring.· For countersinking.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	Available	TiN	-

  From: 660,641 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink Manual Handle

  TRUSCO NAKAYAMA

  [Features]· A manual handle that's used for countersinks with large diameter.· The countersink can be tightened with a 3 mm Allen wrench.[Applications]· For chamfering, deburring and countersinking.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	-	-	-	NA	-	-	-

  From: 461,110 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, hex shaft, "Nice Men G" (titanium-coated)

  TRUSCO NAKAYAMA

  [Features]· Ideal for C chamfering and deburring with Allen wrench (6.35 mm) in line operation.· Titanium coating on blade suppresses burr adhesion on blade edge. Extended life.[Applications]· Work materials: Aluminum, iron, resin, copper, galvalume.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: 455,306 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, R Type R

  OKABE

  [Features]·A center drill manufactured by tempering with one of the best heat treatment·Tip angle: 60°·Drill diameter: 2.5 mm・ Overall length: 53 mm・ Work material: General steel·Tool Material: High-speed steel·Coating / surface treatment: uncoated·Single-edged / doubled-edged: doubled-edged·Peripheral cutting edge Yes/No: no·Groove length: 7.5 mm·Body diameter: 8 mm

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	2.5	60	Centering (Positioning)	general steel[○]	Double-edged	NA	NA	Non-Coated	8

  From: 526,224 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	OKABE
Product SeriesDòng sản phẩm	Toglon Sharp SP 90° Carbide Long Type	Toglon Sharp SP 90° Carbide Long Type DLC Coating	Toglon Sharp SP 60° ALD Coating	Toglon Miniature Hard SP 90° ALT Coating	Carbide HG Center Drill Bit A Type 60゜	Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating	Carbide HG Center Drill Bit, A Type 90°	Carbide SP Center 120°	Carbide SP Center, 120°, ALD Coating	Carbide SP Center, 120°, Long Type, ALD Coating	Carbide SP Center 90°, Long Type ALD Coating	Carbide Center Drill Bit, B-Type, ALD Coating	Momimen Nano	Momimen	Decamomi	60° Momimen	Aluminum Samurai	Mini eco	Momi Eco	Ecomen	Mini eco 2	Momi Eco 2	Ecomen 2	Chamfering cutter	Young Men	Gentlemen	Kame Cutter	Uratorimen-C	Multi Angle Mill	Menmen	Baitender	Baitender dedicated arm	R Cutting Bit	R Special Jr.	R Special	R-Nouveau Jr.	R-Nouveau	RC Hand Cutter	Ryanmencut R	Mini R	Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】	Counter Sink (Titanium Coating)【1-6 Pieces Per Package】	Counter Sink Manual Handle	Chamfering cutter, hex shaft, "Nice Men G" (titanium-coated)	Center Drill, Okabe Standard, R Type R
CADCAD
From	1,544,838 VND	2,451,912 VND	2,149,554 VND	1,937,884 VND	654,879 VND	937,762 VND	1,289,496 VND	371,121 VND	545,306 VND	1,211,005 VND	1,358,151 VND	2,043,522 VND	2,829,024 VND	3,347,380 VND	5,749,128 VND	4,297,732 VND	2,714,526 VND	2,349,618 VND	3,347,380 VND	4,297,732 VND	5,010,447 VND	6,673,318 VND	8,336,385 VND	8,336,385 VND	8,617,104 VND	15,463,535 VND	9,145,728 VND	4,936,698 VND	13,935,240 VND	4,297,732 VND	6,932,594 VND	2,613,026 VND	8,794,706 VND	3,822,654 VND	10,712,167 VND	4,297,732 VND	11,424,686 VND	3,822,654 VND	9,524,178 VND	3,822,654 VND	694,616 VND	660,641 VND	461,110 VND	455,306 VND	526,224 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s)	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s)	6 Day(s) or more	9 Day(s)	6 Day(s) or more	10 Day(s) or more	10 Day(s) or more	4 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	4 Day(s) or more	Same day or more	6 Day(s) or more
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	High-speed steel	Cobalt HSS	-	High-speed steel	High-speed steel
Tool Diameter (D)(mm)	3 ～ 12	3 ～ 12	0.6 ～ 4	0.1 ～ 1.5	0.2 ～ 3	0.2 ～ 1	0.2 ～ 3	0.4 ～ 16	0.4 ～ 16	2 ～ 12	0.5 ～ 4	1 ～ 6.3	6 ～ 7.4	13.5 ～ 16.15	22.5 ～ 26.6	11.88	4 ～ 10	10.3 ～ 12.3	14.2 ～ 17.1	22 ～ 26.6	16.5 ～ 18.6	22.3 ～ 25.3	34.1 ～ 36.9	29.9 ～ 37.9	58.2 ～ 62.2	50.7 ～ 73.3	34.9	6.2 ～ 14	-	13.5 ～ 18.2	49.85～134.6	16	-	25	56	35.4	69.2	25	30 ～ 48	16	-	-	-	-	2.5
Tip angle (θ)	90	90	60	90	60	60	90	120	120	120	90	60	90 ～ 120	90 ～ 118	90 ～ 120	60	90	90 ～ 120	90 ～ 120	90 ～ 120	30 ～ 60	30 ～ 60	30 ～ 60	15 ～ 70	30 ～ 60	15 ～ 75	45	45	0–90	15 ～ 75	45	45	-	-	-	-	-	-	-	-	90	90	-	90	60
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal	-	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning)
work material	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Quenched and tempered steel[○] / high hardness steel[○]	Quenched and tempered steel[○] / high hardness steel[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Double-edged
Peripheral Blade Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA
Coating Y/N	NA	Available	Available	Available	NA	Available	NA	NA	Available	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	-	Available	NA
Coating Type	-	DLC	Other	ALT	-	Other	-	-	Other	Other	Other	Other	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	TiN	-	TiN	Non-Coated
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 to 4	0.5~5	0.5~5	5–10	5–10	1–3	0.5~5 ～ 1–5	1–5	-	-	-	-	8

Loading...Tải…