(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
263 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
From: 426,667 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
YG 1
From: 133,536 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Countersink / 3-Flute / 90°
MISUMI
Necessities in hole chamfering and deburring are available at low prices
From: 620,147 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]·Ideal for chamfering. Can also be used as a deburring tool·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.
From: 1,222,151 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
V-UCS Hole Chamfering, Countersink, V Coating
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.
From: 681,830 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NC Starting Drills for Chamfering (90°), Coated_NC-SD-V
YAMAWA MFG
A drill for chamfering the end face after drilling with a drill.[Features]· Adopts cobalt high-speed steel with excellent wear resistance.[Applications]· By using NC-SD V, larger than the diameter after hole drilling, cleanly-finished chamfered surfaces can be achieved.
From: 446,341 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]· Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.· Finest surface finish without any chatter marks.[Applications]· Work materials: Aluminum, stainless steel, iron, resin, copper.
From: 694,616 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
CARMEX
From: 2,734,490 VND |
---|
Days to Ship: Số ngày giao hàng: 23 Day(s) |
You can add up to 6 items per a category to the compare list.
YG 1
From: 489,643 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set
MISUMI
Frequently used standard sizes are offered in a set at an affordable price
From: 2,801,919 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI SEIKO
[Features]・ Three-Flute Type・ For steel, stainless steel· All products are TiN coated
From: 2,069,017 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Point Drills 90°, Coated_PE-Q-V
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
From: 759,558 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated High-Speed Steel Countersink, 1-Flute / 90°
MISUMI
1-flute type with high versatility in countersink
From: 598,804 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 864,189 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Countersinks 90°, Machining Center Use_CS-Q
YAMAWA MFG
Countersink that can perform high-precision chamfering of round holes and mounting surfaces of small screws and bolts.[Features]· It has a single blade ideal for use in machining centers.[Applications]· Ideal for use with NC machines and machining centers.* Use after fixing both the tool and the workpiece.
From: 204,285 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide SP Center, 90°, ALD Coating
IWATA TOOL
[Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.
From: 739,665 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.
From: 1,912,493 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.
From: 563,011 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BIG DAISHOWA SEIKI
[Features]·Accurate positioning of drilled holes and chamfering are performed at once.·High-precision indexable bit with excellent sharpness.·The cutting edge can be replaced, eliminating the need for regrinding.·It is a long shank type with little work interference.
From: 2,955,023 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Helix Center Drills-Type A 60°_CE-S
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
From: 113,023 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.
From: 5,483,191 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 471,340 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OSG
Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).
From: 278,333 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
High Helix Center Drills-JIS Type A 60°_CESA
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
From: 131,340 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
From: 581,553 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank
OSG
Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.
From: 718,971 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness
From: 190,953 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Helix Center Drills-Type A 90°_CE-Q
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
From: 138,822 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Carbide Corner Radius Cutter CCRC
EIKOSHA
[Features]· A round chamfering cutter for corners.· Solid up to R2.5, attached blade from R3.
From: 3,395,101 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HSS, SP Center, 90° TiCN Coating
IWATA TOOL
[Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness
From: 289,758 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
C-Cutter Mini, Multi-Flute Front/Back-Chamfering Type
BIG DAISHOWA SEIKI
[Features]· Multiple-flute type front and back chamfering "C-Cutter Mini" high performance chamfering cutter that achieves ultra-high feed rates and a compact size.· Ultra-high feed machining achieves dramatic reductions in chamfering time.· Supports a wide range of machining, such as front chamfering, back chamfering, and face milling.
From: 3,759,953 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
High speed coating for Center Boy throwaway bit【5 Pieces Per Package】
BIG DAISHOWA SEIKI
[Features]· Shows outstanding sharpness as it has a cutting edge with precision finishing.· Because it is a disposable item with replaceable edge, it does not require regrinding and always performs smoothly.
From: 3,130,408 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Countersinks 90°and 60°, Drilling Machine Use_CS-QM
YAMAWA MFG
Countersink that can perform chamfering of round holes, mounting surfaces of small screws and bolts, and grooves.[Features]· It has multiple flutes and is ideal for use with drilling machines.· Angles are available in 90° and 60°.[Applications]· Capable of highly precise and stable chamfering of round holes and mounting surfaces of small screws and bolts.
From: 287,808 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Helix Center Drills-Type A 90°, Coated_CE-Q-V
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
From: 486,487 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Mini Corner R Cutter (Half) MCRC
EIKOSHA
[Features]· It is a round chamfering cutter whose tip diameter is unified at φ2.
From: 2,363,801 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
3-Blade Chamfering Cutter 3MC (SKH51)
TAIYO-TOOL
[Applications]・ Hole chamfer[Single-edged / doubled-edged]・ Single-Edged[Tool material type]・ High-speed steel[Coating Y/N]・ N/A[Coating type]・ Uncoated
From: 1,050,780 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]· 90° Carbide 2-Flute Chamfering V-Grooving End Mill· Use for V-grooving, horizontal chamfering, centering, hole chamfering.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Suitable for a wide range of work materials from general steel to aluminum.
From: 907,353 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining style
From: 1,373,122 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TiN Coated / Non-Coated High-Speed Steel NC Spot Drill
MISUMI
Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and Centering
From: 215,820 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Long Shank Point Drills 90°, Coated_PE-QL-V
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
From: 1,411,462 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 795,792 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
From: 749,664 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MAGAFOR
From: 561,234 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°
MAKOTOLOY
[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.
From: 2,601,146 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces
From: 2,000,567 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
CADCAD |
From |
Days to ShipSố ngày giao hàng |
SpecificationsĐặc điểm kĩ thuật |
Tool Material Type |
Tool Diameter (D)(mm) |
Tip angle (θ) |
Application |
work material |
Single blade, two blades |
Peripheral Blade Y/N |
Coating Y/N |
Coating Type |
R Size (R)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | YG 1 | MISUMI | MISUMI | OSG | YAMAWA MFG | TRUSCO NAKAYAMA | CARMEX | YG 1 | MISUMI | OKAZAKI SEIKO | YAMAWA MFG | MISUMI | Nine9 | YAMAWA MFG | IWATA TOOL | GUHRING | IWATA TOOL | BIG DAISHOWA SEIKI | YAMAWA MFG | OSG | OSG | OSG | YAMAWA MFG | EIKOSHA | OSG | IWATA TOOL | YAMAWA MFG | EIKOSHA | IWATA TOOL | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | YAMAWA MFG | YAMAWA MFG | EIKOSHA | TAIYO-TOOL | 7 LEADERS | MISUMI | MISUMI | YAMAWA MFG | YG 1 | YG 1 | MAGAFOR | MAKOTOLOY | MISUMI |
Product SeriesDòng sản phẩm | TS coated carbide chamfering end mill, 2-flute / short model | Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】 | TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank | High speed coating for Center Boy throwaway bit【5 Pieces Per Package】 | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60° | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | ||||||||||||||||||||||||||||||||||||
CADCAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
From | 426,667 VND | 133,536 VND | 620,147 VND | 1,222,151 VND | 681,830 VND | 446,341 VND | 694,616 VND | 2,734,490 VND | 489,643 VND | 2,801,919 VND | 2,069,017 VND | 759,558 VND | 598,804 VND | 864,189 VND | 204,285 VND | 739,665 VND | 1,912,493 VND | 563,011 VND | 2,955,023 VND | 113,023 VND | 5,483,191 VND | 471,340 VND | 278,333 VND | 131,340 VND | 581,553 VND | 718,971 VND | 190,953 VND | 138,822 VND | 3,395,101 VND | 289,758 VND | 3,759,953 VND | 3,130,408 VND | 287,808 VND | 486,487 VND | 2,363,801 VND | 1,050,780 VND | 907,353 VND | 1,373,122 VND | 215,820 VND | 1,411,462 VND | 795,792 VND | 749,664 VND | 561,234 VND | 2,601,146 VND | 2,000,567 VND |
Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 5 Day(s) or more | Same day | 23 Day(s) | Same day or more | Same day | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 7 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 5 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | Same day or more |
SpecificationsĐặc điểm kĩ thuật | |||||||||||||||||||||||||||||||||||||||||||||
Tool Material Type | High-speed steel | Vanadium High Speed Steel | High-speed steel | Carbide | High-speed steel | Cobalt HSS | High-speed steel | - | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel | Cobalt HSS | Carbide | High-speed steel | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | - | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel | Carbide | Powder high-speed steel | Cobalt HSS | High-speed steel | Cobalt HSS | Cobalt HSS | - | Carbide | Carbide |
Tool Diameter (D)(mm) | 3 ~ 25 | - | 6.3 ~ 20.5 | 3 ~ 12 | 4.3 ~ 37 | 3 ~ 25 | - | 1.5 ~ 12 | 3.2 ~ 21 | 6.3/8.3/10.4/12.4/16.5/20.5 | 10 ~ 30 | 3 ~ 20 | 10 ~ 25 | 1–6 ~ 3 to 15 | 4 ~ 16 | 0.1 ~ 6 | 5 ~ 20 | 0.03 ~ 6 | - | 3 ~ 25 | 1 ~ 3.8 | 3 ~ 25 | 3 ~ 25 | 3.15 ~ 25 | 6 ~ 100 | 3 ~ 25 | 0.3 ~ 9 | 3.5 ~ 18 | - | 0.3 ~ 9 | - | - | 6 ~ 12 | 4 ~ 18 | 3 ~ 19 | 16 ~ 46 | 0.5 ~ 20 | 10 ~ 25 | 2 ~ 20 | 4 ~ 20 | 10 ~ 50 | 10 ~ 50 | - | 3 ~ 20 | 3 ~ 12 |
Tip angle (θ) | 60 ~ 120 | 120˚ | - | 60 ~ 120 | 60 ~ 120 | 90° | 90 | 90 | - | - | 90 | 125° | - | 60 ~ 90 | 90 | 90 | 90 | 90 | 90 ~ 120 | 60° | 90 | 90 | 90 ~ 130 | 60° | 60 ~ 120 | 90 | 90 | 90° | - | 90 | 45° | 90 | 60 ~ 90 | 90° | - | 60 ~ 120 | 90 | 60 ~ 120 | 90 ~ 120 | 125° | - | - | 60˚ | 60 | 90 |
Application | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer |
work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | - | general steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | - | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | - | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | - | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | - | general steel[○] | general steel[○] / Resin[○] | general steel[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
Single blade, two blades | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | Single blade | Single blade | Double-edged | Single blade | Single blade | Single blade | Single blade / Double-edged | Single blade | Single blade / Double-edged | - | Double-edged | Single blade | Single blade | Single blade | Double-edged | - | Single blade | Single blade / Double-edged | Double-edged | - | Single blade / Double-edged | - | - | Single blade | Double-edged | - | Single blade | - | Single blade | Single blade | - | - | - | - | Single blade | Single blade |
Peripheral Blade Y/N | NA | - | NA | Available | Available | NA | NA | - | - | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | - | Available | NA | NA | - | NA | NA | NA | NA | NA | - | - | - | Available | NA | NA | - | - | - | - | Available |
Coating Y/N | Available | NA | Available | Available | Available | Available | Available | - | NA | Available | Available | Available | Available | Available | NA | Available | Available | NA | Available | NA | Available | Available | NA | NA | NA | Available | NA | NA | NA | Available | - | Available | NA | Available | NA | NA | Available | Available | Available / NA | Available | Available | Available | Available | NA | Available |
Coating Type | TiN | Non-Coated | TiN | TS | Other | TiN | TiN | - | - | TiN | TiN | TiCN | TiAlN | TiAlN / TiN / DLC | - | Other | Other | - | TiN | - | TiAlN | TiCN | Non-Coated | - | - | TiCN | - | - | - | TiCN | - | TiN | - | TiN | - | Non-Coated | Other | - | TiN / Non-Coated | TiCN | TiCN | TiCN | HSS | - | TS |
R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 20 | - | - | - | - | - | 0.5 ~ 8 | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
[60-160/1]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy