(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
147 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· Supports high-speed rotation unlike a hand reamer, and can therefore be used for difficult-to-cut materials. Counter-clockwise spiral, high-lead flute diameter. 60° torsion angle. [Applications]· Work material: Soft steel, general steel, stainless steel, cast iron, light alloy.
From: 835,468 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· With a wide bite angle and shank rectangular portion, it provides highly accurate finishing of drill holes and rough reamed holes.· Originally intended for hand finishing, but can also be used for final finishing using machines.[Applications]· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
From: 609,043 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OSG
Cemented carbide is used for the cutting edge material.·Supply sufficient cutting fluid.·Use a chuck with high precision.·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
From: 963,333 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
MISUMI
[Features]·Standard hand reamer right blade straight type·Cutting diameter can be selected in units of 0.01 mm
From: 498,485 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Standard high helical reamer right blade left helix angle 60° type. Cutting force is reduced by strong helix angle·Cutting diameter can be selected in units of 0.01 mm
From: 1,011,255 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Shank Chucking Reamer SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
From: 1,136,252 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Hard Reamer CKRH/CKRHM
OKAZAKI SEIKO
[Features]· OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.・ It can process high hardness materials up to HRC62
From: 1,471,615 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Blade tip diameter: Available from 0.5 to 60.· Shank type: Available in end mill shank and straight shank.· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.· Material: SKH51. Right-blade Straight, Bite Angle: 1°.[Applications]· Optimal for general purpose finishing.
From: 508,716 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
From: 717,840 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Cutting capacity up to quenched hardness HRC 62, thanks to P coating for high-hardness steel and right-lead blade shape.
From: 1,268,644 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
From: 1,351,933 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
Cutting capacity for quenched hardness around 60 HRC, thanks to purple coating for high-hardness steel and right-lead blade shape. Shank diameter is endmill shank type.
From: 1,694,871 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
High-speed steel high-torsion spiral reamer.[Features]· Excellent in surface roughness and cutting powder processing thanks to the adoption of 60° torsion.· Reduces cutting resistance.[Applications]· Convenient for general purpose finishing.
From: 610,224 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 728,452 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
F.P. Gold Reamer Straight Blade
FPTOOLS
[Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.
From: 592,519 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.[Features]· Morse taper shank is adopted for machine use.[Applications]· For general purpose finishing.
From: 1,374,873 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TAIYO-TOOL
[Shank type]· Straight shank[Coating Y/N]・ N/A[Groove shaped]・ Straight[With or without bottom edge]・ N/A
From: 1,815,733 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]It is possible to mirror-finish drilled hole of general steel, and it is possible to drill without following pilot hole.
From: 958,417 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Regular Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Standard high helical reamer right blade left helix angle 60° type. Cutting force is reduced by strong helix angle·Cutting diameter can be selected in units of 0.1 mm
From: 853,691 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent abrasion resistance for finishing deep holes.
From: 1,319,004 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Chucking Reamer CCRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 974,395 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
From: 829,294 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 1,214,660 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type・ Flute tolerance 0 to +0.005・ 0.01-mm increments and 0.005-mm increments are added (Just dimensions ±0.03)
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
A drill and reamer integrated HSS tool.[Features]· The tip is a drill and the large-diameter part has a reamer shape.· Since drilling and finishing can be done simultaneously, machining time is shortened. (For through-hole)[Applications]· To be used when drilling holes and finish machining at the same time.
From: 2,686,795 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TAIYO-TOOL
[Shank type]・ Morse taper shank[Coating Y/N]・ N/A[Groove shaped]・ Straight[With or without bottom edge]・ N/A
From: 1,605,370 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Powerful Carbide Reamer Hundredths (0.01 mm Jump) CPRM
OKAZAKI SEIKO
[Features]· Solid type・ The rough cutting edge at the tip stabilizes the finished dimensions with a uniform machining allowance.· Helix angle 35°・ Rough flute, finishing edge 2 steps finish
From: 1,490,738 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Short Reamer CSRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]· OK Tough Coat realizes high speed machining and long lifespan· Solid type
From: 1,089,138 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Unique cutting edge shape enables drilling of various work materials such as stainless steel and aluminum alloy·Drilling is possible under cutting conditions of 60 m/min or more·Compatible with various applications such as hole finishing and high-precision thread pilot hole drilling·It can be used for hole finishing because it achieves the same dimensional accuracy and surface roughness accuracy as boring and reaming·Ideal for pilot hole drilling of high-precision thread with high percentage of thread engagement·Possesses the ability to correct variations in pilot hole diameters, enabling improved hole position accuracy
From: 2,860,723 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation
MISUMI
[Features]·Standard spiral reamer right flute left helix angle 12° type·Cutting diameter can be selected in units of 0.01 mm·Helical blade reduces cutting force
From: 773,619 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Standard machine reamer straight flute. Morse tapered type shank·Cutting diameter can be selected in units of 0.01 mm
From: 1,885,615 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Straight Shank Spiral Chucking Reamer SPSCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
From: 1,167,530 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Spiral reamer (HSS) for spool hole processing.[Features]·There are many angle variations, so it can be used for processing at various angles.[Applications]·Can be used as a deburring tool for spool bushings, etc.
From: 2,209,180 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MIERASEN
[Features]· For taper pin hole finish.[Applications]· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
From: 4,623,696 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CR Chucking Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]Short flute length type· Straight shank· MCO material (cobalt high-speed steel) is used
From: 1,172,251 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]・ It is used for taper pin drilling· MCO material (cobalt high-speed steel) is used
From: 821,405 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Helical Reamer (Tapered Shank) HHHRT
EIKOSHA
[Features]· A high-torsion type that reduces cutting resistance.· Tapered shank type.
From: 1,723,530 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Semicircular Spool Reamer SURH
EIKOSHA
A straight reamer for spool hole machining (HSS).[Features]· Various angles are available to support processing of various angles.· As it has a half-moon shape, it's easy to process chips.[Applications]· Optimal as a tool for removing grime from inside spool bushing, etc.· Convenient for half-moon shaped die spool hole processing.
From: 2,147,784 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·High-speed cutting greatly improves efficiency compared to high-speed steel reamers·High-speed cutting is possible by adopting helical flutes
From: 1,973,934 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Spiral Reamer, High-Precision Tolerance Model
MISUMI
[Features]·Achieves high-precision hole finishing by narrowing the cutting diameter tolerance width·High-speed cutting greatly improves efficiency compared to high-speed steel reamers·The long lifespan allows high-precision machining to be maintained for a long time.·Even higher speed cutting is possible by adopting helical flutes
From: 805,106 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
radius R |
Both square |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | FPTOOLS | OSG | MISUMI | MISUMI | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | FPTOOLS | EIKOSHA | EIKOSHA | FPTOOLS | EIKOSHA | TAIYO-TOOL | FPTOOLS | MISUMI | MISUMI | EIKOSHA | OKAZAKI SEIKO | MISUMI | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | TAIYO-TOOL | OKAZAKI SEIKO | OKAZAKI SEIKO | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | FPTOOLS | MIERASEN | OKAZAKI SEIKO | OKAZAKI SEIKO | EIKOSHA | EIKOSHA | MISUMI | MISUMI | MISUMI |
Product SeriesDòng sản phẩm | High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range) | High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation | |||||||||||||||||||||||||||||||||||||||||
From | 835,468 VND | 609,043 VND | 519,142 VND | 963,333 VND | 498,485 VND | 1,011,255 VND | 1,136,252 VND | 1,471,615 VND | 508,716 VND | 717,840 VND | 1,268,644 VND | 1,351,933 VND | 1,247,050 VND | 1,694,871 VND | 610,224 VND | 728,452 VND | 592,519 VND | 1,374,873 VND | 1,815,733 VND | 958,417 VND | 853,691 VND | 1,319,004 VND | 974,395 VND | 829,294 VND | 1,214,660 VND | 649,290 VND | 2,686,795 VND | 1,605,370 VND | 1,490,738 VND | 1,089,138 VND | 2,860,723 VND | 773,619 VND | 1,885,615 VND | 1,167,530 VND | 2,209,180 VND | 722,944 VND | 4,623,696 VND | 1,172,251 VND | 821,405 VND | 1,723,530 VND | 2,147,784 VND | 1,973,934 VND | 805,106 VND | ||
Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more |
Tool Diameter(mm) | 2 ~ 13 | 1 ~ 20 | 0.2 ~ 12.1 | 0.3 ~ 13.05 | 0.5 ~ 30 | 2.01 ~ 13.99 | 1 ~ 32 | 2.95 ~ 12 | 0.56 ~ 28 | 0.4 ~ 20.05 | 2.95 ~ 12.05 | 0.8 ~ 12.05 | 0.5 ~ 10.009 | 1 ~ 12.1 | 2.1 ~ 16.05 | 2.5 ~ 9 | 1 ~ 14.05 | 2.95 ~ 85 | 1-1/2 ~ 51 | 0.9 ~ 14 | 0.3 ~ 15.99 | 2 ~ 14 | 0.4 ~ 10.05 | 2.95 ~ 2.96 | 1 ~ 10 | 0.8 ~ 12.05 | 1.995 ~ 5.03 | 3 ~ 13 | 1-5/8 ~ 80 | 2.95 ~ 12.05 | 2.95 ~ 2.96 | 2 ~ 10 | 2 ~ 30 | 2.95 ~ 30.02 | 1/2 ~ 25 | - | 2.91 ~ 12.1 | 13 | 4 ~ 15 | 1.5 ~ 8 | 10 | - | 3 ~ 10 | 1 ~ 13 | 0.5 ~ 5.9 |
Groove Length(mm) | - | - | 3 ~ 45 | - | 12 ~ 150 | 13 ~ 45 | 15 ~ 75 | - | 12 ~ 140 | 4 ~ 80 | 40 ~ 65 | 12 ~ 45 | 5 ~ 40 | 15 ~ 65 | 15 ~ 45 | 15 ~ 36 | 20 ~ 85 | 35 ~ 215 | 85 ~ 180 | 20 ~ 70 | 0.5 ~ 48 | 13 ~ 45 | 20 ~ 150 | 26 ~ 31 | 12 ~ 40 | 15 ~ 80 | 18 ~ 30 | 52 ~ 100 | 35 ~ 220 | 20 ~ 31 | 27 ~ 30 | 12 ~ 52 | 30 ~ 150 | 35 ~ 150 | 20 ~ 65 | 60 ~ 160 | 20 ~ 25 | - | 30 ~ 50 | 37 ~ 145 | 40 | 60 ~ 160 | 25 ~ 40 | 10 ~ 44 | 3 ~ 10 |
work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | - | general steel[○] / Resin[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
Shank Type | straight shank | straight shank | End Mill Shank | End Mill Shank / straight shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | straight shank | End Mill Shank | Taper shank / Morse Taper Shank | straight shank | straight shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | Morse Taper Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | Taper shank | straight shank | End Mill Shank | End Mill Shank | Taper shank | straight shank | straight shank | Taper shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
Coating Y/N | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | Available | Available | NA | Available | NA | Available | Available | NA | NA | NA | NA | NA | NA | Available | Available ~ NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Groove Shape | Spiral | Straight | Straight | Straight | Straight | Spiral | Straight | Spiral | Straight | Straight | Spiral | Straight | Straight | Spiral | Helical | Spiral | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Helical | Straight | Straight | Spiral | Straight | Spiral | Spiral | Straight | Straight | Straight | Straight | Helical | Straight | Spiral | Spiral | Straight |
Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ~ 10 | - | - | - | - | - | 1 ~ 5 | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.04 ~ 37.99 | - | - | - | 2.14 ~ 10.8 | - | 2.04 ~ 32.99 | - | - | - |
radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 10 | - | - | - | - | - | 1゚ ~ 10゚ | - | - | - |
Loading...Tải…
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy