(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
147 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· Supports high-speed rotation unlike a hand reamer, and can therefore be used for difficult-to-cut materials. Counter-clockwise spiral, high-lead flute diameter. 60° torsion angle. [Applications]· Work material: Soft steel, general steel, stainless steel, cast iron, light alloy.
From: 835,468 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· With a wide bite angle and shank rectangular portion, it provides highly accurate finishing of drill holes and rough reamed holes.· Originally intended for hand finishing, but can also be used for final finishing using machines.[Applications]· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
From: 609,043 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
MISUMI
[Features]·Standard hand reamer right blade straight type·Cutting diameter can be selected in units of 0.01 mm
From: 498,485 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OSG
Cemented carbide is used for the cutting edge material.·Supply sufficient cutting fluid.·Use a chuck with high precision.·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
From: 963,333 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
From: 1,214,660 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
Cutting capacity for quenched hardness around 60 HRC, thanks to purple coating for high-hardness steel and right-lead blade shape. Shank diameter is endmill shank type.
From: 1,694,871 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
From: 1,351,933 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.[Features]· Morse taper shank is adopted for machine use.[Applications]· For general purpose finishing.
From: 1,374,873 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
From: 717,840 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
F.P. Gold Reamer Straight Blade
FPTOOLS
[Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.
From: 592,519 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.
From: 6,461,825 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) |
You can add up to 6 items per a category to the compare list.
CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type・ Flute tolerance 0 to +0.005・ 0.01-mm increments and 0.005-mm increments are added (Just dimensions ±0.03)
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Long Type, Deep Hole Use, for Improved Guidance, 1° Bite Gradient
From: 1,606,215 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Cobalt High-Speed Steel Spiral Reamer
MISUMI
[Features]·Cobalt high-speed steel spiral reamer with high versatility·Design with 10° left helix angle and 45° tip chamfer angle·Helical blade reduces cutting force
From: 534,026 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CHRSM Short Carbide Helical Reamer (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type・ Short type of carbide helical reamer (CHRM)
From: 687,538 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation
MISUMI
[Features]·Standard spiral reamer right flute left helix angle 12° type·Cutting diameter can be selected in units of 0.01 mm·Helical blade reduces cutting force
From: 773,619 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Standard high helical reamer right blade left helix angle 60° type. Cutting force is reduced by strong helix angle·Cutting diameter can be selected in units of 0.01 mm
From: 1,011,255 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
From: 1,352,643 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CCRM Carbide Chucking Reamer (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 764,033 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Full Cut Solid Carbide Reamers MRS
MAKOTOLOY
[Features]· Made using carefully selected carbide materials for excellent sharpness, precision, surface roughness and rigidity.
From: 785,585 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Coated Solid Spiral Reamer CSPR-C
EIKOSHA
Carbide spiral reamer with high versatility and excellent wear resistance.[Features]· Features TiCN coating that prevents welding and improves roughness of the finishing surface.· Uses a twisted blade with excellent chip discharge performance.[Applications]· Ideal for machining a wide range of work materials from nonferrous metal to carbon steel.
From: 1,403,330 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
Made using cobalt HSS for even longer cutting life. Also effective with thermally refined materials of 40 HRC or less.
From: 715,970 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Blade tip diameter: Available from 0.5 to 60.· Shank type: Available in end mill shank and straight shank.· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.· Material: SKH51. Right-blade Straight, Bite Angle: 1°.[Applications]· Optimal for general purpose finishing.
From: 508,716 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Spiral reamer for 1/50 tapered hole processing (HSS).[Features]· Shank has a square section that can also be used for turning by hand.· Adoption of twisted blade allows appropriate disposal of chips.
From: 735,190 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, left
From: 1,809,820 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General-purpose spiral reamer (HSS) with torsion blade that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Adopts a torsion blade with excellent cutting powder discharge.[Applications]· For general purpose finishing.
From: 628,519 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
From: 725,786 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· For hole finish machining of cast iron and general steel· MCO material (cobalt high-speed steel) is used
From: 627,732 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Carbide Spiral Reamer, High-Precision Tolerance Model
MISUMI
[Features]·Achieves high-precision hole finishing by narrowing the cutting diameter tolerance width·High-speed cutting greatly improves efficiency compared to high-speed steel reamers·The long lifespan allows high-precision machining to be maintained for a long time.·Even higher speed cutting is possible by adopting helical flutes
From: 805,106 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Shank Chucking Reamer SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
From: 1,136,252 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Shank Spiral Chucking Reamer SPSCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
From: 1,167,530 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Helical Tapered Pin Reamer HTPR
EIKOSHA
Spiral reamer for 1/48 and 1/50 tapered hole processing (HSS).[Features]· A torsion resistant type for 1/48 and 1/50 taper pins.· By adopting strong torsion, surface roughness and chip disposal are improved and cutting resistance is reduced.
From: 1,234,612 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Reamer FP Platinum Reamer
FPTOOLS
[Features]· Reamer shape ideal for high-speed machining: Achieves high-precision and high-speed machining thanks to its high torsion, highly rigid blade shape and eccentric chamfer blade.· Special coating: Features a special coating with an excellent oxidation resistance temperature and friction coefficient. This coating helps improve the tool service life and allows smooth cutting chip processing.· High-precision end mill shank: Shank tolerance of h5 is adopted.· Effective for machining stainless steel: General-purpose F.P. Platinum Reamer can even be used for high-speed machining of stainless steel.
From: 2,087,665 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]It is possible to mirror-finish drilled hole of general steel, and it is possible to drill without following pilot hole.
From: 958,417 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and short blade length.· As the bite length is short, it is capable of processing blind holes.· The cobalt HSS has been coated with a newly developed special coating featuring coating hardness of 3,700 Hv, providing excellent abrasion resistance.· End mill shank is adopted.
From: 1,170,874 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MIERASEN
[Features]· Has Morse taper shank with 45° bite and long burnished blade. Widely used for machine applications.[Applications]· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
From: 2,228,832 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSR Carbide Short Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]· Solid type・ Ten times longer lifespan than HSS reamer.・ It supports a wide range of workpieces from cast iron to steel.· It is capable of high precision drilling・ It reduces machining time・ General-purpose carbide reamer・ Short type with less runout
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Machine Taper Pin Reamer TPRT (SKH51)
TAIYO-TOOL
[Shank type]・ Morse taper shank[Coating Y/N]・ N/A[Groove shaped]・ Straight[With or without bottom edge]・ N/A
From: 1,968,721 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· TiN coating improves durability.· Abundant range of sizes in 0.005 mm increments.
From: 735,728 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· For hole finish machining of cast iron and general steel· MCO material (cobalt high-speed steel) is used
From: 859,651 VND |
---|
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 728,452 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
radius R |
Both square |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | MISUMI | OSG | FPTOOLS | EIKOSHA | FPTOOLS | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | FPTOOLS | FPTOOLS | OKAZAKI SEIKO | EIKOSHA | MISUMI | OKAZAKI SEIKO | MISUMI | MISUMI | EIKOSHA | OKAZAKI SEIKO | MAKOTOLOY | EIKOSHA | FPTOOLS | EIKOSHA | EIKOSHA | FPTOOLS | EIKOSHA | OKAZAKI SEIKO | OKAZAKI SEIKO | MISUMI | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | MIERASEN | OKAZAKI SEIKO | TAIYO-TOOL | EIKOSHA | OKAZAKI SEIKO | MISUMI | EIKOSHA |
Product SeriesDòng sản phẩm | High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model | CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range) | High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation | ||||||||||||||||||||||||||||||||||||||||||
From | 835,468 VND | 609,043 VND | 498,485 VND | 963,333 VND | 519,142 VND | 1,214,660 VND | 1,694,871 VND | 1,351,933 VND | 1,374,873 VND | 717,840 VND | 1,247,050 VND | 592,519 VND | 6,461,825 VND | 649,290 VND | 1,606,215 VND | 534,026 VND | 687,538 VND | 773,619 VND | 1,011,255 VND | 1,352,643 VND | 764,033 VND | 785,585 VND | 1,403,330 VND | 715,970 VND | 508,716 VND | 735,190 VND | 1,809,820 VND | 628,519 VND | 725,786 VND | 627,732 VND | 805,106 VND | 1,136,252 VND | 1,167,530 VND | 1,234,612 VND | 2,087,665 VND | 958,417 VND | 722,944 VND | 1,170,874 VND | 2,228,832 VND | 649,290 VND | 1,968,721 VND | 735,728 VND | 859,651 VND | 728,452 VND | |
Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more |
Tool Diameter(mm) | 2 ~ 13 | 1 ~ 20 | 0.5 ~ 30 | 0.3 ~ 13.05 | 0.2 ~ 12.1 | 0.8 ~ 12.05 | 1 ~ 12.1 | 0.8 ~ 12.05 | 2.95 ~ 85 | 0.4 ~ 20.05 | 0.5 ~ 10.009 | 1 ~ 14.05 | 30.25~34.25 | 1.995 ~ 5.03 | 1/2 ~ 26 | 1 ~ 13 | 2.95 ~ 12.05 | 2 ~ 30 | 2.01 ~ 13.99 | 1 ~ 30 | 2.95 ~ 12.05 | 0.51 ~ 10 | 0.8 ~ 12.05 | 6.5 | 0.56 ~ 28 | - | 1 ~ 15.5 | 1/4 ~ 20.2 | 3 ~ 12 | 2.2 ~ 8 | 1 ~ 13 | 1 ~ 32 | 1/2 ~ 25 | - | 2.95 ~ 12.005 | 0.9 ~ 14 | 2.91 ~ 12.1 | 1 ~ 12.095 | 10 | 1 ~ 20 | - | 3.93 ~ 12.97 | 1 ~ 2 | 1.8 ~ 5 | 2.5 ~ 9 |
Groove Length(mm) | - | - | 12 ~ 150 | - | 3 ~ 45 | 15 ~ 80 | 15 ~ 65 | 12 ~ 45 | 35 ~ 215 | 4 ~ 80 | 5 ~ 40 | 20 ~ 85 | 98 | 18 ~ 30 | 50 ~ 250 | 15 ~ 44 | 22 ~ 35 | 30 ~ 150 | 13 ~ 45 | 15 ~ 75 | 26 ~ 31 | 15 ~ 40 | 15 ~ 45 | 35 | 12 ~ 140 | 48 ~ 318 | 8 ~ 45 | 30 ~ 120 | 26 ~ 31 | 30 ~ 60 | 10 ~ 44 | 15 ~ 75 | 20 ~ 65 | 28 ~ 318 | 15 ~ 40 | 20 ~ 70 | 20 ~ 25 | 12 ~ 30 | - | 12 ~ 45 | 87 ~ 351 | 40 ~ 80 | 30 | - | 15 ~ 36 |
work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | Quenched and tempered steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Resin[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | - | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] |
Shank Type | straight shank | straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | Taper shank / Morse Taper Shank | straight shank | End Mill Shank | End Mill Shank | - | straight shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | straight shank | - | End Mill Shank | straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank / straight shank | straight shank | straight shank | End Mill Shank | straight shank | straight shank | straight shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | Taper shank | straight shank | Morse Taper Shank | straight shank | End Mill Shank | End Mill Shank | straight shank |
Coating Y/N | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA | Available | - | NA | NA | NA | NA | NA | NA | NA | NA | - | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | Available | NA | NA | NA | Available | NA | NA | Available |
Groove Shape | Spiral | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Straight | Straight | - | Straight | Straight | Spiral | Helical | Spiral | Spiral | Straight | Straight | Straight | Spiral | Spiral | Straight | Spiral | Spiral | Spiral | Straight | Straight | Spiral | Straight | Spiral | Helical | Spiral | Straight | Straight | Spiral | Straight | Straight | Straight | Straight | Straight | Straight | Spiral |
Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.9 ~ 29.7 | - | - | - | - | - | - | - | 1 ~ 30 | - | - | - | - | - | - | 4.9 ~ 49.5 | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.86 ~ 36.06 | - | - | - | - | - | - | - | 1.46 ~ 36.06 | - | - | - | - | - | - | 6.44 ~ 56.52 | - | - | - | - |
radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/50 | - | - | - | - | - | - | - | 1/50 | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy