(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
192 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Model A Tap Series, Spiral Tap A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
From: 481,962 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap for General Application_EX-SFT
OSG
It is used for blind holes, and is suitable for work materials with continuous cutting chips in a coil shape in carbon steel, steel alloy, and non-ferrous metals.
From: 111,765 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap Series, General Purpose EX-POT
OSG
It is used for general purposes and is suitable for work materials in which cutting chips are continuously coiled in carbon steel, steel alloy and non-ferrous metals. The cutting chips are pushed forward reliably, so there is no risk of cutting chip damage.
From: 108,236 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
From: 538,333 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.
From: 123,834 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OSG
High-speed steel hand tap.Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible
From: 170,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Suitable for steel and non-ferrous alloys. High-speed cutting is possible, durability is greatly improved, and highly efficient tapping is possible.
From: 476,061 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
From: 510,341 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Model A Tap Series, Pointed Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
From: 490,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.
From: 620,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
MT Series High-Speed Steel Spiral Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.
From: 210,191 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
From: 539,405 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.[Features]· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.· Minimal scrap issues.· Low cutting torque.· Capable of machining both synchronously and asynchronously.[Applications]· Ideal for machining through-holes.* N-PO models will transition to PO as soon as stock runs out.
From: 140,051 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Coated, Through Hole Use(with LH Spiral Flutes)_AU+SL
YAMAWA MFG
A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).
From: 452,258 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintains excellent chip discharge performance (smooth discharge).[Applications]· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.· Ideal for water soluble cutting fluids.
From: 449,897 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
From: 283,784 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap with Long Shank_A-LT-SFT
OSG
It has stable cutting chip evacuation and can be used in various work materials and a wide range of cutting areas and machines. A spiral flute tap with a spiral groove that is mainly used for blind holes.
From: 738,893 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
From: 473,307 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
From: 550,224 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes General Use SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
From: 445,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 942,443 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
From: 409,830 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap General Purpose, Long Shank EX-LT-SFT
OSG
It is used when the tool runout of the thread section is insufficient with the standard spiral flute tap.
From: 406,666 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Tap for General Use Long Shank EX-LT
OSG
Long shank type.Tool Material: Vanadium high-speed steelWork material: general steel / cast iron / aluminum / copper
From: 344,999 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Long Shank・General Application_EX-LT-POT
OSG
It is used when the tool runout of the thread section is insufficient with the standard spiral point tap.
From: 395,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tapered Tap for American Piping General Use (NPTF) TPT
OSG
Used to machine female tapered pipe threads. Mainly used for connecting pipe-shaped objects
From: 1,031,725 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Hand Taps for Left Hand Threads_HT-LH
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
From: 180,180 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps_+SP
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
From: 147,422 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap TiN Coating TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
From: 488,333 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap for Die Castings_EX-DC-HT
OSG
Suitable for aluminum alloy casting, aluminum alloy die-casting, zinc alloy die casting, etc.
From: 228,333 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
From: 377,150 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Insert Screw Thread Tap_EX-HL-SFT
OSG
It is a blind hole and is used to tap the female thread into which the insert (helical coil) is inserted.
From: 401,898 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use Short Screw S-TPT
OSG
Used to machine female tapered pipe threads. Short screw type used for tapping of short thread section such as elbows and teeth
From: 591,667 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OSG
[Specifications]・ Shape: Spiral point tap・ Screw type: Parallel pipe thread・ Number of chamfer tooth: 4P・ Work Material: Medium carbon steel (C content 0.25 to 0.45%) "very good" / steel alloy (SCM) "very good" / cast steel (SC) "very good" / ductile cast iron (FCD) "suitable / copper (Cu) "suitable / brass (Bs) "suitable / brass cast iron (BsC) "suitable / bronze (PB) "suitable / rolled aluminum (AL) "suitable / Aluminum alloy casting (AC, ADC) "/ Magnesium alloy casting (MC) "suitable / zinc alloy casting (ZDC) "suitable / thermoplastic (PVC, nylon, etc.) [○]
From: 467,799 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.
From: 745,666 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
A roll tap suitable for threading non-ferrous materials (aluminum casting, aluminum die casting, brass etc.).
From: 185,130 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
It has stable cutting chip evacuation and can be used in various work materials and a wide range of cutting areas and machines. Spiral point tap with point groove used for through holes.
From: 778,333 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Tap Long Shank General Application_LT-SPT
OSG
It is used to machine the parallel female threads of the tapered pipe threads and the parallel pipe threads.
From: 1,204,999 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
OSG
Mainly used for tapping nuts. Considering the workability of the nut, the length of the thread section and shank part are long, and continuous machining is possible until the nut is fully filled in the shank part.
From: 660,190 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Pg Conduit Thread Tap (German Standard)
SKC
It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency
From: 2,264,998 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
From: 386,979 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads_PS
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
From: 450,158 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 327,854 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) |
You can add up to 6 items per a category to the compare list.
From: 193,781 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | MISUMI | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | TANOI MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | YAMAWA MFG | OSG | OSG | OSG | OSG | YAMAWA MFG | OSG | OSG | OSG | SKC | YAMAWA MFG | YAMAWA MFG | YG 1 | OSG KOREA CORP |
Product SeriesDòng sản phẩm | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | Spiral Fluted Taps, Coated, Through Hole Use(with LH Spiral Flutes)_AU+SL | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | Parallel Pipe Thread Tap Long Shank General Application_LT-SPT | EX-POT for General Purpose / EX-H-POT Coating Treatment for General Purpose | |||||||||||||||||||||||||||||||||||||||
From | 481,962 VND | 111,765 VND | 108,236 VND | 538,333 VND | 123,834 VND | 170,000 VND | 476,061 VND | 510,341 VND | 490,000 VND | 620,000 VND | 210,191 VND | 539,405 VND | 140,051 VND | 452,258 VND | 449,897 VND | 283,784 VND | 738,893 VND | 473,307 VND | 550,224 VND | 445,000 VND | 942,443 VND | 409,830 VND | 406,666 VND | 344,999 VND | 395,000 VND | 1,031,725 VND | 180,180 VND | 147,422 VND | 488,333 VND | 228,333 VND | 377,150 VND | 401,898 VND | 591,667 VND | 467,799 VND | 745,666 VND | 185,130 VND | 778,333 VND | 1,204,999 VND | 660,190 VND | 2,264,998 VND | 386,979 VND | 450,158 VND | 327,854 VND | 193,781 VND | |
Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 20 Day(s) | 6 Day(s) or more | Same day or more | Same day or more | 20 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | 20 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Quote | 20 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 6 Day(s) | 4 Day(s) or more |
Screw size (Nominal) | No.10-32UNF ~ M56 | No.10UN ~ M36 | No.10UN ~ M45 | R1 ~ R5/8 | No.10 ~ M48 | No.0 ~ M42 | No.1UN ~ M38 | No.0UN ~ M20 | No.2UN ~ M12 | No.10-32UNF ~ M24 | M1 ~ M45 | M2 ~ M24 | No.2UN ~ M6 | No.10 ~ M48 | M3 ~ M12 | M2 ~ M12 | 1 ~ M30 | M2 ~ M24 | M1.4 ~ M42 | M3 ~ M14 | G1 ~ Rp3/8 | M2 ~ M20 | 1'-11 ~ 7/8-14 | M2.5 ~ M22 | M3 ~ M18 | M2 ~ M30 | NPT1/4 ~ NPT1/8 | M1.4 ~ M30 | M2 ~ M6 | M1.4 ~ M24 | M1.4 ~ M18 | M1 ~ M6 | M3 ~ M10 | R1 ~ R3/8 | G1/4 ~ G3/8 | No.2UN ~ M12 | M1 ~ M10 | M2 ~ M24 | Rp1 ~ Rp3/8 | M4 ~ M12 | PG7 ~ PG42 | No.10-32UNF ~ M20 | 1 1/2 ~ 7/8 | M3 ~ M24 | M1.4 ~ M24 |
Screw Types | Meter / unified | Meter / unified | Meter / unified / Whitworth / Sewing Machine | Taper for Pipe | Meter / unified / Whitworth / Sewing Machine | Meter / unified / Sewing Machine | Meter / unified / Whitworth / Sewing Machine | Meter / unified | Meter / unified | Meter / unified | Meter | Meter | Meter / unified | Meter / unified / Whitworth / Sewing Machine | Meter | Meter | Meter / unified / Whitworth | Meter | Meter | Meter | Parallel for Pipes | Meter | Taper for Pipe | Meter | Meter / unified | Meter / Whitworth | Taper for Pipe | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Parallel for Pipes | Meter / unified | Meter | Meter | Parallel for Pipes | Meter | Other | Meter / unified | Parallel for Pipes | Meter | Meter |
work material | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[◎] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] | Zinc Alloy Casting (ZDC)[○] |
Pitch (P), Number of Threading(mm) | 0.25 ~ 5.5 | 0.25 ~ 48 | 0.25 ~ 56 | 11 ~ 28 | 0.25 ~ 64 | 0.2 ~ 80 | 0.25 ~ 72 | 0.25 ~ 80 | 0.25 ~ 56 | 0.25 ~ 3 | 0.2 ~ 4.5 | 0.4 ~ 3 | 0.25 ~ 56 | 0.25 ~ 64 | 0.5 ~ 1.75 | 0.4 ~ 1.75 | 0.5 ~ 24 | 0.25 ~ 3 | 0.3 ~ 4.5 | 0.5 ~ 2 | 11 ~ 28 | 0.4 ~ 2.5 | - | 0.45 ~ 2.5 | 0.5 ~ 16 | 0.4 ~ 10 | 18 ~ 27 | 0.3 ~ 3.5 | 0.4 ~ 1 | 0.3 ~ 3 | 0.3 ~ 1.75 | 0.25 ~ 1 | 0.5 ~ 1.5 | 11 ~ 28 | 19 ~ 28 | 0.25 ~ 56 | 0.25 ~ 1.5 | 0.25 ~ 3 | 11 ~ 28 | 0.5 ~ 1.75 | 16 ~ 20 | 0.25 ~ 1.75 | 11 ~ 28 | 0.5 ~ 3 | 0.3 ~ 3 |
Tool Material Type | Powder high-speed steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | Cobalt HSS | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
Tap Type | Spiral Tap | Spiral Tap | Point tap | Tap for pipes | Spiral Tap | Hand Tap | Hand Tap | Roll tap | Roll tap | Point tap | Roll tap | Spiral Tap | Roll tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Point tap | Tap for pipes | Roll tap | Tap for pipes | Spiral Tap | Hand Tap | Point tap | Tap for pipes | Hand Tap | Spiral Tap | Spiral Tap | Hand Tap | Roll tap | Spiral Tap | Tap for pipes | Point tap | Roll tap | Roll tap | Point tap | Tap for pipes | Thread-cutting-related tool | Tap for pipes | Roll tap | Tap for pipes | Spiral Tap | Point tap |
Hole type | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole | For through hole / For blind hole | - | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | - | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole |
Chamfer threads (Lcf) | 1.5P ~ 2.5P | 2.5P ~ 3P | 5P | 2.5P | 2.5P | 1.5P ~ 5P | 1.5P ~ 9P | 2P ~ 4P | 2P ~ 4P | 5P | 2P ~ 4P | 2.5P | 1P | 5P | 5P | 2.5P | 2.5P | 2.5P | 5P | 6P | 4P | 1P ~ 2P | 2.5P | 2.5P | 1.5P ~ 5P | 5P | 2.5P | 1.5P ~ 5P | 2.5P | 2.5P | 1.5P ~ 3P | 2P ~ 4P | 2.5P | 2.5P | 4P | 2P ~ 4P | 2P ~ 4P | 5P | 4P | - | - | 2P ~ 4P | 1.5P ~ 3.5P | 2.5 | 5 |
Coating Type | Other | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | TiN | TiCN | Other | TiCN | Non-Coated | TiCN | - | TiN | TiN | - | Other | TiN | TiN | Non-Coated | TiCN | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | TiN | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | TiCN | - | Other | Non-Coated | Non-Coated | - | TiCN | - | - | Homo |
Coating Y/N | Available | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | NA | Available | NA | Available | Available | NA | Available | Available | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | NA | NA | NA | Available | NA | Available | NA | NA | - | Available | NA | NA | NA |
Overall Length (L)(mm) | 34 ~ 250 | 30 ~ 155 | 30 ~ 155 | 55 ~ 105 | 36 ~ 195 | 36 ~ 175 | 30 ~ 165 | 30 ~ 105 | 30 ~ 82 | 34 ~ 120 | 30 ~ 220 | 40 ~ 120 | 30 ~ 62 | 36 ~ 185 | 46 ~ 82 | 42 ~ 82 | 70 ~ 250 | 80 ~ 200 | 34 ~ 175 | 46 ~ 88 | 55 ~ 95 | 40 ~ 105 | 55 ~ 145 | 80 ~ 250 | 100 ~ 300 | 80 ~ 250 | 55 ~ 62 | 36 ~ 135 | 42 ~ 62 | 34 ~ 120 | 34 ~ 100 | 36 ~ 62 | 48 ~ 82 | 55 ~ 95 | 55 ~ 65 | 60 ~ 200 | 36 ~ 75 | 80 ~ 200 | 120 ~ 150 | 100 ~ 170 | 85 ~ 135 | 36 ~ 105 | 55 ~ 120 | 48 ~ 135 | 34 ~ 120 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy